Working fluid selection and design of small-scale waste heat recovery systems based on organic Rankine cycles

Demand for the use of energy systems, entailing high efficiency as well as availability to harness renewable energy sources, is a key issue in order to tackling the threat of global warming and saving natural resources. Organic Rankine cycle (ORC) technology has been identified as one of the most promising technologies in recovering low-grade heat sources and in harnessing renewable energy sources that cannot be efficiently utilized by means of more conventional power systems. The ORC is based on the working principle of Rankine process, but an organic working fluid is adopted in the cycle instead of steam. This thesis presents numerical and experimental results of the study on the design of small-scale ORCs. Two main applications were selected for the thesis: waste heat re- covery from small-scale diesel engines concentrating on the utilization of the exhaust gas heat and waste heat recovery in large industrial-scale engine power plants considering the utilization of both the high and low temperature heat sources. The main objective of this work was to identify suitable working fluid candidates and to study the process and turbine design methods that can be applied when power plants based on the use of non-conventional working fluids are considered. The computational work included the use of thermodynamic analysis methods and turbine design methods that were based on the use of highly accurate fluid properties. In addition, the design and loss mechanisms in supersonic ORC turbines were studied by means of computational fluid dynamics. The results indicated that the design of ORC is highly influenced by the selection of the working fluid and cycle operational conditions. The results for the turbine designs in- dicated that the working fluid selection should not be based only on the thermodynamic analysis, but requires also considerations on the turbine design. The turbines tend to be fast rotating, entailing small blade heights at the turbine rotor inlet and highly supersonic flow in the turbine flow passages, especially when power systems with low power outputs are designed. The results indicated that the ORC is a potential solution in utilizing waste heat streams both at high and low temperatures and both in micro and larger scale appli- cations.

The reciprocal interaction between sleep and type 2 diabetes mellitus: facts and perspectives

Type 2 diabetes mellitus is a systemic disease characterized by intolerance to glucose and peripheral resistance to insulin. This endocrine disease affects fundamental mechanisms of the central nervous system and jeopardizes the balance of vital functions such as the cardiovascular and circadian rhythm. The increased prevalence of metabolic disorders in our society is aggravated by endemic voluntary postponement of bedtime and by the current sedentary lifestyle, leading to epidemic proportions of obese people. Diabetes and chronic loss of sleep share the fact that both affect millions and one is detrimental to the other. Indeed, sleep deficits have marked modulatory effects on glucose metabolism and insulin sensitivity and foster metabolic syndrome that culminates in sleep disorders like restless syndrome and sleep apnea, which in turn lead to poor sleep quality. We examine the hypothesis that these two worldwide emerging disorders are due to two interlinked cycles. In our paradigm, we establish an intimate relationship between diabetes and sleep disturbances and postulate possible mechanisms that provide support for this conjecture. In addition, we propose some perspectives about the development of the reciprocal interaction between predictor components of metabolic syndrome and sleep disturbances that lead to poor sleep quality. The ability to predict the development and identify or associate a given mode of sleep disturbance to diabetes would be a valuable asset in the assessment of both. Furthermore, major advances in care coupled with healthy lifestyles can ensure a higher quality of life for people with diabetes.

Interaction between affordance and handedness recognition: a chronometric study

The visualization of tools and manipulable objects activates motor-related areas in the cortex, facilitating possible actions toward them. This pattern of activity may underlie the phenomenon of object affordance. Some cortical motor neurons are also covertly activated during the recognition of body parts such as hands. One hypothesis is that different subpopulations of motor neurons in the frontal cortex are activated in each motor program; for example, canonical neurons in the premotor cortex are responsible for the affordance of visual objects, while mirror neurons support motor imagery triggered during handedness recognition. However, the question remains whether these subpopulations work independently. This hypothesis can be tested with a manual reaction time (MRT) task with a priming paradigm to evaluate whether the view of a manipulable object interferes with the motor imagery of the subject's hand. The MRT provides a measure of the course of information processing in the brain and allows indirect evaluation of cognitive processes. Our results suggest that canonical and mirror neurons work together to create a motor plan involving hand movements to facilitate successful object manipulation.

The chronic kidney disease outcomes and practice patterns study Brazil (CKDopps-Brazil): Design, data and methodology

Introduction: The chronic kidney disease outcomes and practice patterns study (CKDopps) is an international observational, prospective, cohort study involving patients with chronic kidney disease (CKD) stages 3-5 [estimated glomerular filtration rate (eGFR) < 60 ml/min/1.73 m2, with a major focus upon care during the advanced CKD period (eGFR < 30 ml/min/1.73 m2)]. During a 1-year enrollment period, each one of the 22 selected clinics will enroll up to 60 advanced CKD patients (eGFR < 30 ml/min/1.73 m2 and not dialysis-dependent) and 20 earlier stage CKD patients (eGFR between 30-59 ml/min/1.73 m2). Exclusion criteria: age < 18 years old, patients on chronic dialysis or prior kidney transplant. The study timeline include up to one year for enrollment of patients at each clinic starting in the end of 2013, followed by up to 2-3 years of patient follow-up with collection of detailed longitudinal patient-level data, annual clinic practice-level surveys, and patient surveys. Analyses will apply regression models to evaluate the contribution of patient-level and clinic practice-level factors to study outcomes, and utilize instrumental variable-type techniques when appropriate. Conclusion: Launching in 2013, CKDopps Brazil will study advanced CKD care in a random selection of nephrology clinics across Brazil to gain understanding of variation in care across the country, and as part of a multinational study to identify optimal treatment practices to slow kidney disease progression and improve outcomes during the transition period to end-stage kidney disease.

Stromal interaction molecule 1 and its role in the regulation, proliferation and protein expression in follicular ML-1 thyroid cancer cells

Calcium (Ca2+) is involved in the regulation of variety of cellular functions including hallmarks of cancer development such as cellular migration and cellular proliferation. Store-operated calcium entry (SOCE) is a central mechanism in cellular calcium signaling and in maintaining the cellular calcium balance. Stromal interaction molecule 1(STIM1) has been identified as an important constituent of SOCE. In this thesis , the STIM1 proteins are studied for their importance in cellular processes and their effects on the expression of S1P1, S1P2, S1P3, VEGFR-2, and TRPC-1 in follicular ML-1 thyroid cancer cells. The results show the importance of STIM1 proteins in SOCE in these cells. The SOCE is significantly reduced in the STIM1 knockdown cells. The results also show the importance of STIM1 proteins in the expression of S1P2 and VEGFR-2 in these cells, as knockdown of STIM1 was shown to upregulate the expression of S1P2 and VEGFR-2. The migration and proliferation is also considerably reduced in the cells in which STIM1 has been knocked down showing the significance of STIM1 in the migration and proliferation in these cells.

Active Magnetic Bearing System Identification Methods and Rotor Model Updating

Active magnetic bearing is a type of bearing which uses magnetic field to levitate the rotor. These bearings require continuous control of the currents in electromagnets and data from position of the rotor and the measured current from electromagnets. Because of this different identification methods can be implemented with no additional hardware. In this thesis the focus was to implement and test identification methods for active magnetic bearing system and to update the rotor model. Magnetic center calibration is a method used to locate the magnetic center of the rotor. Rotor model identification is an identification method used to identify the rotor model. Rotor model update is a method used to update the rotor model based on identification data. These methods were implemented and tested with a real machine where rotor was levitated with active magnetic bearings and the functionality of the methods was ensured. Methods were developed with further extension in mind and also with the possibility to apply them for different machines with ease.

Performance of different drying methods and their effects on the physiological quality of grain sorghum seeds (S. bicolor (L.) Moench)

This experiment viewed to evaluate the physiological quality of grain sorghum seeds as well as to determine the respective drying curve of each of three drying methods. The seeds harvested at 18.9%, 18.1%, and 18.2% of moisture content were submitted to the following drying methods : a) under natural conditions, b) an intermittent dryer in which the combustion of firewood was the source of caloric energy, and c) a stationary dryer in which the source of caloric energy was the burning of liquefied petroleum gas. The experimental design was a completely randomized one with 25 repetitions of one hundred seeds each. The water contents and weight of one thousand seeds were evaluated. Seeds physiological quality was evaluated by germination and vigor tests. Seed drying rates were of 0.11, 1.25, and 0.55 percent points per hour (pph -1) for the natural, intermittent and stationary drying methods, respectively. The intermittent treatment permits the highest loss of water in the shortest period of time, and germination and vigor remaining unchanged.

Automated system of seedling image analysis (SVIS) and electrical conductivity to assess sun hemp seed vigor

The development of new procedures for quickly obtaining accurate information on the physiological potential of seed lots is essential for developing quality control programs for the seed industry. In this study, the effectiveness of an automated system of seedling image analysis (Seed Vigor Imaging System - SVIS) in determining the physiological potential of sun hemp seeds and its relationship with electrical conductivity tests, were evaluated. SVIS evaluations were performed three and four days after sowing and data on the vigor index and the length and uniformity of seedling growth were collected. The electrical conductivity test was made on 50 seed replicates placed in containers with 75 mL of deionised water at 25 ºC and readings were taken after 1, 2, 4, 8 and 16 hours of imbibition. Electrical conductivity measurements at 4 or 8 hours and the use of the SVIS on 3-day old seedlings can effectively detect differences in vigor between different sun hemp seed lots.

Interaction between stress and immunity during a week leading to competition in young athletes

This study examined changes in the salivary concentrations of immunoglobulin A (sIgA), cortisol (sC), testosterone (sT) and testosterone-to-cortisol ratio (T/C) in 23 competitive swimmers, 11-15 years old, during a week leading to competition as compared to a control (non-competitive) week. Results showed no effect of week or day, and no significant week-by-day interaction for sIgA, sC and T/C. In contrast, sT significantly decreased during the week of competition, along with a 7%, non-significant decrease in the weekly T/C. The latter suggests that the swimmers were in a catabolic state due to their training, but this did not have a negative effect on their performance Since sC did not change over the two weeks and according to the sport anxiety scale, competition stress was relatively low in these peri-pubertal athletes, it is concluded that in the absence of high cortisol levels mucosal immunity is unaffected in young athletes prior to competition.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

Biomolecular interaction analysis in functional proteomics

In der funktionellen Proteomforschung werden bekannte Interaktionen eines zellulären Netzwerkes qualitativ untersucht. Diese Veröffentlichung beschreibt verschiedene biomolekulare Interaktionsanalysen, anhand des Modellsystems PKA, die zur detaillierten Charakterisierung von Bindungen herangezogen werden können. Neben den Gleichgewichtsbindungsdaten (generiert aus AlphaScreen, FP, SPR und ITC Messungen) wurden aus ITC Messungen die thermodynamischen Parameter G, H und S ermittelt. Durch Anwendung der BRET2 (Bioluminescence resonance energy transfer) Methode konnten in lebenden Zellen Aussagen über Bindungsereignisse und deren Lokalisation getroffen werden.

Effect of planting methods and cyanobacterial inoculants on yield, water productivity and economics of rice cultivation

The impact of two crop planting methods and of the application of cyanobacterial inoculants on plant growth, yield, water productivity and economics of rice cultivation was evaluated with the help of a split plot designed experiment during the rainy season of 2011 in New Delhi, India. Conventional transplanting and system of rice intensification (SRI) were tested as two different planting methods and seven treatments that considered cyanobacterial inoculants and compost were applied with three repetitions each. Results revealed no significant differences in plant performance and crop yield between both planting methods. However, the application of biofilm based BGA bio-fertiliser + 2/3 N had an overall positive impact on both, plant performance (plant height, number of tillers) and crop yield (number and weight of panicles) as well as on grain and straw yield. Higher net return and a higher benefit-cost ratio were observed in rice fields under SRI planting method, whereas the application of BGA + PGPR + 2/3 N resulted in highest values. Total water productivity and irrigation water productivity was significantly higher under SRI practices (5.95 and 3.67 kg ha^(-1) mm^(-1)) compared to practices of conventional transplanting (3.36 and 2.44), meaning that using SRI method, water saving of about 34 % could be achieved and significantly less water was required to produce one kg of rice. This study could show that a combination of plant growth promoting rhizobacteria (PGPR) in conjunction with BGA and 2/3 dose of mineral N fertiliser can support crop growth performance, crop yields and reduces overall production cost, wherefore this practices should be used in the integrated nutrient management of rice fields in India.