Epidemiological profile of Trypanosoma cruzi-infected mothers and live birth conditions in the state of Minas Gerais, Brazil

INTRODUCTION: The aim of this study was to assess the epidemiological characteristics of Trypanosoma cruzi-infected mothers and the live birth conditions of neonates.METHODS:A serological survey with IgG-specific tests was conducted using dried blood samples from newborn infants in the State of Minas Gerais. T. cruzi infection was confirmed in mothers through positive serology in two different tests, and infected mothers were required to have their infants serologically tested after the age of 6 months. The birth conditions of the neonates were obtained from the System of Information on Live Births database.RESULTS:The study included 407 children born to T. cruzi-infected mothers and 407 children born to uninfected mothers. The average age of seropositive mothers was 32 years (CI95% 31.3-32.6), which was greater than the average age of seronegative mothers - 25 years (CI95% 24.8-25.2). The mothers' level of education was higher among uninfected mothers (41% had 8 or more years of education, versus 22% between the infected mothers). Vaginal delivery was more frequent among infected mothers. There was no evidence of inter-group differences with respect to the child's sex, gestational age, birth weight or Appearance, pulse, grimace, activity and respiration (APGAR) scores at 1 and 5 minutes.Conclusions:The level of education and the greater number of previous pregnancies and cases of vaginal delivery reflect the lower socioeconomical conditions of the infected mothers. In the absence of vertical transmission, neonates had similar health status irrespective of the infection status of their mothers.

Biology of Triatoma carcavalloi Jurberg, Rocha & Lent, 1998 under laboratory conditions

Introduction Triatoma carcavalloi is a wild species that is found in sympatry with Triatoma rubrovaria and Triatoma circummaculata, which are vectors of Trypanosoma cruzi currently found in rural areas of Rio Grande do Sul, Brazil. Methods Fertility was assessed and to determine the incubation period, the eggs were observed until hatching. The first meal was offered to 1st stage nymphs. The intermolt period was also determined. The number of blood meals was quantified at each nymphal stage and the resistance to fasting as the period between ecdysis and death. Mortality was assessed and longevity was determined by recording the time that elapsed from molting to the adult stage and until death. The developmental cycle was assessed by recording the length in days of each stage from molting to adult hood. Results The average incubation period was 22.7 days. The average first meal occurred 3.1 days after hatching. The 5th stage nymph to adult intermolting period was the longest at 193.4 days. The average number of feedings during nymphal development was 13.4. The resistance to fasting assay indicated that the 3rd, 4th and 5th stage nymphs presented higher resistance than did adults. The highest mortality rate was observed in the 3rd stage nymphs (22.2%). The average length of adult survival was 25.6 weeks, and the average total life cycle lasted 503.4 days. Conclusions This study is the first report on the biology of T. carcavalloi that fed on mice. The presented findings expand the bionomic knowledge of these species.

Surgical site infections in women and their association with clinical conditions

Introduction Surgical site infections (SSIs) can affect body tissues, cavities, or organs manipulated in surgery and constitute 14% to 16% of all infections. This study aimed to determine the incidence of SSIs in women following their discharge from a gynecology outpatient clinic, to survey different types of SSIs among women, and to verify the association of SSIs with comorbidities and clinical conditions. Methods Data were collected via analytical observation with a cross-sectional design, and the study was conducted in 1,026 women who underwent gynecological surgery in a teaching hospital in the municipality of Teresina, in the northeast Brazilian State of Piauí, from June 2011 to March 2013. Results The incidence of SSIs after discharge was 5.8% among the women in the outpatient clinic. The most prevalent surgery among the patients was hysterectomy, while the most prevalent type of SSI was superficial incisional. Comorbidities in women with SSIs included cancer, diabetes mellitus, and hypertension. Conclusions Surveillance of SSIs during the post-discharge period is critical for infection prevention and control. It is worth reflecting on the planning of surgical procedures for patients who have risk factors for the development of SSIs.

Capital requirements and loan market conditions insight into Portuguese Banking system (2004-2011)

Capital Requirements have been gaining importance in the current macroeconomic and financial environment and Portugal is no exception. Nonetheless, despite the several media articles on this subject, the associations with Loan Market Conditions, namely availability and pricing are still unstudied. Thus, this project adds to the existing literature a characterization of Portuguese four biggest banks on capital reporting and requirements fulfillment. It is concluded that banks under analysis need to increase capital and that there is an association between the variables under study: Share Capital is negatively correlated with Credit Volume, and it is positively correlated with Net Commercial Income.

Clinical conditions associated withintestinal strongyloidiasis in Rio de Janeiro, Brazil

INTRODUCTION: Strongyloides stercoralis is a soil-transmitted helminth that produces an infection that can persist for decades. The relationships between certain clinical conditions and strongyloidiasis remains controversial. This study aims to identify the clinical conditions associated with intestinal strongyloidiasis at a reference center for infectious diseases in Rio de Janeiro, Brazil. METHODS: The clinical conditions that were assessed included HIV/AIDS, HTLV infection, cardiovascular diseases, diabetes, obstructive respiratory diseases, viral hepatitis, tuberculosis, cancer, chronic renal disease, nutritional/metabolic disorders, psychiatric conditions, rheumatic diseases and dermatologic diseases. We compared 167 S. stercoralis-positive and 133 S. stercoralis-negative patients. RESULTS: After controlling for sex (male/female OR = 2.29; 95% (CI): (1.42 - 3.70), rheumatic diseases remained significantly associated with intestinal strongyloidiasis (OR: 4.96; 95% CI: 1.34-18.37) in a multiple logistic regression model. With respect to leukocyte counts, patients with strongyloidiasis presented with significantly higher relative eosinophil (10.32% ± 7.2 vs. 4.23% ± 2.92) and monocyte (8.49% ± 7.25 vs. 5.39% ± 4.31) counts and lower segmented neutrophil (52.85% ± 15.31 vs. 61.32% ± 11.4) and lymphocyte counts (28.11% ± 9.72 vs. 30.90% ± 9.51) than S. stercoralis-negative patients. CONCLUSIONS: Strongyloidiasis should be routinely investigated in hospitalized patients with complex conditions facilitate the treatment of patients who will undergo immunosuppressive therapy. Diagnoses should be determined through the use of appropriate parasitological methods, such as the Baermann-Moraes technique.

Susceptibility of Triatoma sordida Stal, 1859 (Hemiptera: Reduviidae) to alpha-cypermethrin under natural climatic conditions

Abstract:INTRODUCTION:Despite the recommendations by interpretation of resistance ratios obtained in laboratory bioassays, little is known about the actual impact of these results in the effectiveness of vector control activities in the field. In this context, our objective was to determine the mean value of different resistance ratios obtained by laboratory bioassays performed as part of the chemical control strategies of Triatoma sordida in the field.METHODS:Field bioassays were developed in Monte Azul and Coração de Jesus (Southeast, Brazil). In each location, samples were formed with three domestic units treated with alpha-cypermethrin 20.0% (Alfatek (r) 200 SC). One day after spraying, 10 fifth-instar nymphs remained in contact with the surfaces treated (adobe with plaster, adobe without plaster, or wood) with insecticide in plastic cones for 72h. Three cones were exposed inside the intradomicile and the peridomicile. The insects in the control group were exposed to an insecticide-free piece of cardboard. Mortality was measured 72h after removal of the insects from the treated surfaces. The tests were realized in triplicate.RESULTS:Mortality was 100.0% in all locations, except for Monte Azul; Landinho (96.6%) and Coração de Jesus; Barriguda (96.6%).CONCLUSIONS:Although the resistant populations in laboratory tests proved to be susceptible in the field, this observation is not sufficient to suggest that the cut-off points used to justify the resistance ratio should be changed. In this sense, we recommend that laboratory and field bioassays are carried out with a greater number of Triatominae populations to allow more in-depth consideration of the subject.

Basic sanitation, socioeconomic conditions, and degree of risk for the presence and maintenance of malaria in a low-transmission area in the Brazilian Amazon

ABSTRACTINTRODUCTION:This study aimed to evaluate basic sanitation and socioeconomic indicators, reported cases of malaria, and risk of contracting malaria in the Ananindeua municipality, State of Pará.METHODS:Data on basic sanitation and socioeconomic dimensions were taken from the Brazilian Institute of Geography and Statistics [ Instituto Brasileiro de Geografia e Estatística (IBGE)] 2010 census. Epidemiological malaria information was taken from the Epidemiological Malaria Surveillance Information System [ Sistema de Informação de Vigilância Epidemiológica de Malária (SIVEP/Malaria)], between 2003 and 2013 of the Ministry of Health and from the SIVEP/Malaria forms of the municipality's Endemic Diseases Unit for 2,013 cases.RESULTS:Our data do not confirm the correlation among indicators of basic sanitation, socioeconomic conditions, and water supply with malaria cases. Of the 1,557 cases evaluated, most were caused by Plasmodium vivax , with rare cases of Plasmodium falciparum and mixed infections. There were 756 notifications in 2003. The number of reported cases was sharply reduced between 2006 and 2012, but a 142-case outbreak occurred in 2013. Ananindeua municipality's Annual Parasite Index indicated low risk in 2003 and no risk in other years, and the 2,013 cases were predominantly male individuals aged ≥40 years.CONCLUSIONS:Our data confirm the non-endemicity of malaria in the Ananindeua municipality, as the Annual Parasite Indices described for the years 2004-2013 classify it as a risk-free area. However, the 2013 outbreak indicates the need to strengthen prevention, surveillance, and control activities to reduce the risk of new outbreaks and consequent economic and social impacts on the population.

Emergent and re-emergent parasites in HIV-infected children: immunological and socio-environmental conditions that are involved in the transmission of Giardia spp. and Cryptosporidium spp.

ABSTRACT INTRODUCTION: Emergent and re-emergent waterborne protozoans have become a worldwide public health problem, especially among vulnerable groups. METHODS: This cross-sectional study evaluated 17 HIV-infected children and their families. RESULTS: A high (76.5%) percentage of parasite-infected children was observed, even among children with CD4+ T-cell counts of >200 cells/mm3. Giardia spp., Cryptosporidium spp. and Cyclospora spp. were observed in 41.2% of these children Low income, poor hygiene practices, and co-infection in domestic, peridomestic and scholastic environments were significant sources of these intestinal infections. CONCLUSIONS: Early diagnosis, timely treatment, and socio-educational interventions may improve the health conditions of this vulnerable population.

The impact of credit conditions on market liquidity – a case for European stock markets

The recent financial crisis has drawn the attention of researchers and regulators to the importance of liquidity for stock market stability and efficiency. The ability of market-makers and investors to provide liquidity is constrained by the willingness of financial institutions to supply funding capital. This paper sheds light on the liquidity linkages between the Central Bank, Monetary Financial Institutions and market-makers as crucial elements to the well-functioning of markets. Results suggest the existence of causality between credit conditions and stock market liquidity for the Eurozone between 2003 and 2015. Similar evidence is found for the UK during the post-crisis period. Keywords: stock

Dispersion and re-agglomeration of graphite nanoplates in polypropylene melts under controlled flow conditions

The kinetics of GnP dispersion in polypropylene melt was studied using a prototype small scale modular extensional mixer. Its modular nature enabled the sequential application of a mixing step, melt relaxation, and a second mixing step. The latter could reproduce the flow conditions on the first mixing step, or generate milder flow conditions. The effect of these sequences of flow constraints upon GnP dispersion along the mixer length was studied for composites with 2 and 10 wt.% GnP. The samples collected along the first mixing zone showed a gradual decrease of number and size of GnP agglomerates, at a rate that was independent of the flow conditions imposed to the melt, but dependent on composition. The relaxation zone induced GnP re-agglomeration, and the application of a second mixing step caused variable dispersion results that were largely dependent on the hydrodynamic stresses generated.

Preliminary observations on the effect of sudden changes of temperature on survival of young Matrinxã (Brycon cephalus) under laboratory conditions

Matrinxã is a very promising amazonian fish for fish culture in Brazil. This study is aimed at determining the approximate tolerated temperature range in this species. Groups of ten young matrinxã specimens (15.1±0.8 cm average length and 58.3±10.3 g average weight) were subjected to 9 different temperatures for 24 hours without previous acclimation. Fish were transferred from an initial temperature of 27ºC to those ranging from 12 to 39ºC at 3ºC intervals. Both 12ºC and 39ºC temperatures were lethal for this species with 100% mortality rate. Following 2 minutes of exposure to 39ºC fish changed behavior, showing an increase in opercular movements and erratic swimming; mortality reached 100% after 18 minutes. At 12ºC, fish lost equilibrium immediately after exposure and started swimming erratically; after only 4 minutes fish became lethargic and remained immobile on the bottom of the tank. Total mortality was only evident following 24 hours. At 15ºC matrinxã lost equilibrium after 5 to 6 minutes of exposure but mortality was only 20% after 24 hours. Fish tolerated well temperatures ranging from 18 to 36ºC with 100% survival after 24 hours. This preliminary study suggests that temperatures between 18 and 36ºC are the approximate range normally tolerated by this species, although survival at other temperatures may be increased by gradually acclimating fish to the more severe increases or decreases in temperature. In addition, it indicates that matrinxã may be cultivated over a wide geographical area.

Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process

The performance of parts produced by Free Form Extrusion (FFE), an increasingly popular additive manufacturing technique, depends mainly on their dimensional accuracy, surface quality and mechanical performance. These attributes are strongly influenced by the evolution of the filament temperature and deformation during deposition and solidification. Consequently, the availability of adequate process modelling software would offer a powerful tool to support efficient process set-up and optimisation. This work examines the contribution to the overall heat transfer of various thermal phenomena developing during the manufacturing sequence, including convection and radiation with the environment, conduction with support and between adjacent filaments, radiation between adjacent filaments and convection with entrapped air. The magnitude of the mechanical deformation is also studied. Once this exercise is completed, it is possible to select the material properties, process variables and thermal phenomena that should be taken in for effective numerical modelling of FFE.

Weld lines in extrusion: Understanding the role of the flow conditions

This work reports the implemen tation and verification of a new so lver in OpenFOAM® open source computational library, able to cope w ith integral viscoelastic models based on the integral upper-convected Maxwell model. The code is verified through the comparison of its predictions with anal ytical solutions and numerical results obtained with the differential upper-convected Maxwell model

Intra and inter-individual differences in social intelligence of Portuguese students

Social intelligence is a favorable condition for career decision-making and development. The social intelligence indices of Portuguese students in school years prior to a career transition are characterized and intra and interindividual differences are analyzed. Participants were 1095 students (552, 50.4% women) with a mean age of 14.78 years (SD = 1.86), in the 8th (542, 49.5%), 10th (295, 26.9%) and 11th (258, 23.6%) grades. The Cognitive Test of Social Intelligence (PCIS) was administered at two moments, six months apart. Results indicate that the 8th grade obtained higher average scores in Problem Solving, Motivation and Self-confidence (time 1), while the 10th grade obtained better results in Problem Solving, Motivation and Familiarity (time 2). Between the assessment moments, all school years register an increase in Problem Solving and Self-confidence in social situations. These results constitute favorable psychological conditions for the promotion of ethical questioning in career guidance interventions.

Project scheduling and cost minimization with multiple availability constrained resources under stochastic conditions

The authors propose a mathematical model to minimize the project total cost where there are multiple resources constrained by maximum availability. They assume the resources as renewable and the activities can use any subset of resources requiring any quantity from a limited real interval. The stochastic nature is inferred by means of a stochastic work content defined per resource within an activity and following a known distribution and the total cost is the sum of the resource allocation cost with the tardiness cost or earliness bonus in case the project finishes after or before the due date, respectively. The model was computationally implemented relying upon an interchange of two global optimization metaheuristics – the electromagnetism-like mechanism and the evolutionary strategies. Two experiments were conducted testing the implementation to projects with single and multiple resources, and with or without maximum availability constraints. The set of collected results shows good behavior in general and provide a tool to further assist project manager decision making in the planning phase.