Analise comparativa do desempenho de ferramentas no torneamento do aluminio 2024

The aluminium alloys are used in many fields because of their versatility combined with the excellent aluminium’s properties, mentioned in the study. This study aims to compare the performance of polished Hard Metal, Hard Metal covered with TiB2 and High Speed Steel (HSS) tools, at the aluminium 2024 alloy’s turning, as a function of variation of some turning parameters such as: feed, depth of cut and cutting speed; and study the surface finish and the required power during turning by processing the output data, like analyze the chip’s features for each used tool. The results provide information of the tool’s material effects, when submitted to different turning conditions, about the output variable in question. In this way, it was possible to notice that although the Hard Metal covered with TiB2 tool has provided the better surface finish, the chip’s features were better when the turning was accomplished by the Polished Hard Metal tool. In relation to the required turning’s power, the lowest consumption occurred with the High Speed Steel tool

Estudo da velocidade de despassivação de aços em estruturas de concreto armado, em meio de cloreto

The aim of the present study was to investigate the corrosion resistance in chloride medium of two cylindrical steel samples from civil construction (CA-50 and CA-60). For this purpose, electrochemical measurements were performed in NaCl solution, 4.0 g/L, naturally aerated. According to electrochemical responses, it was observed an active dissolution process at open circuit potential for both steels. In this comparative study, the differences between CA-50 and CA60 were not significant, since the values of polarization resistance estimated by EIS were the same order of magnitude for both types of steel (oscillating between 200 and 500 Ohm). For all evaluated thicknesses of concrete reinforcement, these values ranged between 2 and 9 kOhm, and the lower value was associated with lower thickness, particularly at 7, 21 and 35 days. When these results were compared with those determined for the CA-60, it was found that the layer of concrete reinforcement provide a protection against corrosion in chloride medium at least ten times larger

Blog para o basquetebol: uma ferramenta no processo ensino-aprendizagem-treinamento dos sistemas táticos

Pós-graduação em Desenvolvimento Humano e Tecnologias - IBRC

Avaliação a longo prazo da técnica de avanço da tuberosidade tibial modificada em cães

Pós-graduação em Cirurgia Veterinária - FCAV

Conventional and Doppler ultrasonography on a goat with gangrenous mastitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de metaheurísticas combinada a diferentes métodos de aglutinação para a otimização de um processo de torneamento com múltiplas respostas

Pós-graduação em Engenharia Mecânica - FEG

Contribuição ao estudo do desgaste de bedames na usinagem de ligas de alumínio-silício

Pós-graduação em Engenharia Mecânica - FEIS

Estudo da aplicação de mínima quantidade de fluido no fresamento de acabamento da liga Ti-6Al-4V

Pós-graduação em Engenharia Mecânica - FEG

A articulação do quadril em uma perspectiva preditora da velocidade de marcha em idosas e como foco de intervenção de duas modalidades terapêuticas: Método Pilates e Haste Vibratória

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise experimental da resistência à corrosão e da velocidade de corrosão: uma proposta pedagógica

In this work it is proposed the use of a chemical activity, in which a corrosion process occurs, aiming to provide to the student relationship among the learning concepts and corrosion phenomena that occur everyday. It is suggested that the experiment development is based on Vygotsky theory, so that students work in groups, which may facilitate social interaction among students and results discussion among groups under professor guidance. This proposal can provide the involved concepts learning, as well as student training such as a critical and reflexive individual.

Relacionamento entre as variáveis da corrida de aproximação e da posição de pé de apoio com a velocidade da bola nos chutes com o membro dominante e não dominante

The aim of the study was to analyze the relationship between run-up spatial-temporal variables with ball velocity in the dominant and non-dominant kicks, and to compare the ball velocity between contralateral limbs. Six futsal players (aged 13 and 14 years) participated in the study. The participants performed 4 kicks with maximal velocity in the stationary ball with each limb. Participants’ movements were recorded by 4 digital cameras (120 Hz). Dvideow software was used for kinematic procedures. The variables analyzed were: length and width of the last but one step and last step before ball contact, distance of the support foot to the ball, run-up velocity and ball velocity. The relationship between spatial-temporal variables with the ball velocity was analyzed by linear regressions with ball velocity as dependent variable. Student t test for paired samples was used to compare ball velocity between dominant and non-dominant kicks. For the dominant limb, the ball velocity was predicted only by the run-up velocity in 16.7%, while for the non-dominant limb only the distance of the support foot to the ball was prognostic variable in 11.9%. The ball velocity was greater for the dominant limb. Run-up variables that predictive ball velocity were different between the dominant and non-dominant kicks.

Relação dos saltos vertical, horizontal e sêxtuplo com a agilidade e velocidade em crianças

The aim of the present study were: 1) To verify the relationship of vertical, horizontal and sextuple jumps with agility and velocity of 5, 10 and 25 m; 2) To verify the capacity of these jumps to predict the agility and 5, 10 and 25 m velocity performance in children. Twenty eight boys (9.47 ± 0.64 years) and thirty girls (9.69 ± 0.70 years) were evaluated. The correlation values between agility and velocity on 5, 10 and 25 m velocity were, respectively, r = 0.63, 0.51, 0.44 and 0.64 with vertical jump, r = 0.68, 0.62, 0.28 and 0.62 with sextuple jump, and r = 0.60, 0.50, 0.26 and 0.57 with horizontal jump. The vertical and sextuple jumps were able to predict the agility and 25 m velocity performance (p < 0.05). Furthermore, they demonstrated capacity to predict 5 and 10 m velocity, respectively (p < 0.05). The vertical and sextuple jump tests may be used for assessment and control of training with children practicing activities that require agility and velocity, since both jumps predicted the agility and velocity performance, which did not occur with the horizontal jump.

Comunicação pública para cidadania no avanço das redes sociais oficiais

The advancement in the deployment of social networks by governments can generate public communication initiatives, which may contribute to the strengthening of citizenship, understood as the exercise of the right to information about public management. This article describes results of research which assessed, through content analysis, the breadth and depth of information offered by the state government of São Paulo in news stories accessed through the social networks Twitter, YouTube, Facebook and Orkut which publicize purposes, lines of action and limits of public policies of immediate impact for citizenship, in the areas of welfare, health, education and environment. Results indicate that the analyzed sample contains, on average, from 28% to 40% of all information deemed necessary for the comprehensive and plural characterization of a public policy, according to the theoretical-methodological context of the research.

Grinding of AISI 4340 steel with interrupted cutting by aluminum oxide grinding wheel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade dos processos mecanizados de semeadura e colheita na cultura da soja

Pós-graduação em Agronomia (Produção Vegetal) - FCAV