Protection of interconnected wind turbines against lightning effects: overvoltages and electromagnetic transientes study

This paper is concerned with direct or indirect lightning strokes on wind turbines, studying overvoltages and electromagnetic transients. As wind power generation undergoes rapid growth, lightning damages involving wind turbines have come to be regarded with more attention. With the aim of providing further insights into the lightning protection of wind turbines, describing the transient behavior in an accurate way, the restructured version (RV) of the electromagnetic transients program (EMTP) is used in this paper. A new case study is presented with two interconnected wind turbines, considering a direct lightning stroke to the blade or considering that lightning strikes the soil near a tower. Comprehensive computer simulations with EMTP-RV are presented and conclusions are duly drawn.

Avaliação de riscos ambientais e profissionais na indústria metalomecânica

A preservação e proteção do ambiente são, cada vez mais, de elevada importância. Para fazer face ao grande consumo de bens, que se verifica nos dias de hoje, a atividade industrial tem aumentado, assim como os resíduos, as emissões, os efluentes e ainda os resíduos de produtos em fim de vida, provocando impactes no meio ambiente, com alterações significativas que se manifestam a nível das condições climáticas e, consequentemente, afetam a qualidade de vida das pessoas a sua segurança e saúde, bem como a fauna e a flora. O presente estudo tem por objetivo identificar as principais atividades desenvolvidas na indústria metalomecânica, identificar os principais aspetos e impactes ambientais, bem como os perigos e riscos profissionais associados às atividades deste setor, identificar a principal legislação em vigor em matéria ambiental e de segurança e saúde no trabalho, selecionar e analisar metodologias de avaliação de riscos ambientais e profissionais e aplicar estas metodologias num estudo de caso numa empresa metalomecânica, tendo em vista comparar os resultados das avaliações, por duas metodologias diferentes, dos riscos ambientais e profissionais e daí tirar conclusões. A vantagem da aplicação de duas metodologias diferentes na avaliação de riscos ambientais e profissionais é a de poder aferir se os resultados são idênticos independentemente da metodologia utilizada. Após a aplicação das duas metodologias, com critérios de avaliação diferentes, selecionadas para avaliação dos riscos ambientais, concluiu-se que as metodologias apresentam resultados semelhantes, o mesmo aconteceu com as duas metodologias, com critérios de avaliação, também, diferentes, selecionadas para avaliação dos riscos profissionais em que as duas metodologias apresentaram os mesmos resultados.

Protection of athymic (Nu/Nu) BALB/c mice against Plasmodium berghei by splenocytes from normal (Nu/ +) BALB/c mice

Athymic BALB/c (Nu/Nu) mice died at 7-13 days after inoculation (DAI) of Plasmodium berghei NK65, whereas their heterozygous (Nu/+) littermates died at 7-8 DAI. Nude (Nu/Nu) mice, reconstituted with 2 x 10(7) splenocytes from uninfected heterozygous (Nu/+) littermates at 20 days before parasite inoculation (DBI), died about 2 days earlier than control nude mice; nude mice reconstituted at 10 or 2 DBI lived 2 to 4 days longer than control nudes; and nude mice reconstituted 2 DAI lived even longer and some survived. These findings indicate that P. berghei NK65 induces at least two T-cell dependent immune phenomena, one suppressive and the other stimulatory. Reconstitution of nude mice with T-cells from BALB/c (Nu/+) mice appeared to reduce or bypass suppressive T-cell activities which allowed the formation of a protective immune response by some of the nude mice.

Innovative manufacturing process for hybrid pultruded products based on cork and polymeric pre-shapes

Pultruded products are being targeted by a growing demand due to its excellent mechanical properties and low chemical reactivity, ensuring a low level of maintenance operations and allowing an easier assembly operation process than equivalent steel bars. In order to improve the mechanical drawing process and solve some acoustic and thermal insulation problems, pultruded pipes of glass fibre reinforced plastics (GFRF) can be filled with special products that increase their performance regarding the issues previously referred. The great challenge of this work was drawing a new equipment able to produce pultruded pipes filled with cork or polymeric pre-shaped bars as a continuous process. The project was carried out successfully and the new equipment was built and integrated in the pultrusion equipment already existing, allowing to obtain news products with higher added-value in the market, covering some needs previously identified in the field of civil construction.

Exposure to acellular blood products and risk of HIV infection in hemophiliacs from Belo Horizonte, Brazil

Results of a HIV prevalence study conducted in hemophiliacs from Belo Horizonte, Brazil are presented. History of exposure to acellular blood components was determined for the five year period prior to entry in the study, which occurred during 1986 and 1987. Patients with coagulations disorders (hemophilia A = 132, hemophilia B = 16 and coagulation disorders other than hemophilia = 16) were transfused with liquid cryoprecipitate, locally produced, lyophilized cryoprecipitate, imported from São Paulo (Brazil) and factor VIII and IX, imported from Rio de Janeiro (Brazil), Europe, and United States. Thirty six (22%) tested HIV seropositive. The univariate and multivariate analysis (logistic model) demonstrated that the risk of HIV infection during the study period was associated with the total units of acellular blood components transfused. In addition, the proportional contribution of the individual components to the total acellular units transfused, namely a increase in factor VIII/IX and lyophilized cryoprecipitate proportions, were found to be associated with HIV seropositivity. This analysis suggest that not only the total amount of units was an important determinant of HIV infection, but that the risk was also associated with the specific component of blood transfused

Inspeção, Diagnóstico e Reparação de Estruturas de Betão Armado

O mercado da reabilitação de estruturas em Portugal está em voga, sendo um nicho de mercado com evolução galopante nos últimos anos fruto da consciencialização das entidades responsáveis, assim como das necessidades de intervir no parque edificado cada vez mais degradado, resultando num estímulo para o mercado da construção face ao seu estado atual. As causas associadas à degradação prematura dos materiais estruturais resultam de erros de conceção e execução, assim como do facto de muitas estruturas de betão armado do parque habitacional edificado nas décadas de 60 e 70, estarem a atingir o fim do seu período de vida útil. Na avaliação do estado de degradação de estruturas de betão armado aconselha-se a utilização de ensaios não destrutivos, uma vez que permitem efetuar um diagnóstico com resultados positivos salvaguardando a integridade da estrutura. A norma EN 1504“Produtos e Sistemas para a proteção e reparação de estruturas de betão” estipula os procedimentos de execução, as características dos materiais mais adequados a cada tipo de projeto, assim como a divisão do seu encadeamento em 5 fases. O caso prático apresentado é um edifício de prestação de serviços municipais, tendo sido aplicado com o maior rigor possível as fases de inspeção, diagnóstico, deliberação e reparação. Foi efetuada uma fase de diagnóstico, de carácter visual assim como de caracterização física dos elementos estruturais em betão armado através de ensaios “in situ”. A estrutura avaliada apresenta debilidades e um estado de degradação acelerado, pelo que urge uma intervenção de reparação por forma a repor a estrutura com as características da sua conceção, salvaguardando a segurança das pessoas e bens.

Protection of C57BL/10 mice by vaccination with association of purified proteins from Leishmania (Leishmania) amazonensis

In the past few years, induction of protective immunity to cutaneous leishmaniasis has been attempted by many researchers using a variety of antigenic preparations, such as living promastigotes or promastigote extracts, partially purified, or defined proteins. In this study, eleven proteins from Leishmania (Leishmania) amazonensis (LLa) with estimated molecular mass ranging from 97 to 13.5kDa were isolated by polyacrylamide gel electrophoresis and electro-elution. The proteins were associated as vaccine in different preparations with gp63 and BCG (Bacilli Calmette-Guérin). The antigenicity of these vaccines was measured by their ability to induce the production of IFN-g by lymphocyte from subjects vaccinated with Leishvacinâ . The immunogenicity was evaluated in vaccinated mice. C57BL/10 mice were vaccinated with three doses of each vaccine consisting of 30 mg of each protein at 15 days interval. One hundred mg of live BCG was only used in the first dose. Seven days after the last dose, they received a first challenge infection with 105 infective promastigotes and four months later, a second challenge was done. Two months after the second challenge, 42.86% of protection was obtained in the group of mice vaccinated with association of proteins of gp63+46+22kDa, gp63+13.5+25+42kDa, gp63+46+42kDa, gp63+66kDa, and gp63+97kDa; 57.14% of protection was demonstrated with gp63+46+97+13.5kDa, gp63+46+97kDa, gp63+46+33kDa, and 71.43% protection for gp63 plus all proteins. The vaccine of gp63+46+40kDa that did not protect the mice, despite the good specific stimulation of lymphocytes (LSI = 7.60) and 10.77UI/ml of IFN-g production. When crude extract of L. (L.) amazonensis was used with BCG a 57.14% of protection was found after the first challenge and 28.57% after the second, the same result was observed for gp63. The data obtained with the vaccines can suggest that the future vaccine probably have to contain, except the 40kDa, a cocktail of proteins that would protect mice against cutaneous leishmaniasis.

Evaluation of Opuntia spp. bioactive products as promising natural chemotherapeutical agents- an in vitro approach

Dissertation to obtain a Master Degree in Biotechnology

Residual effect of two Bacillus thuringiensis var. israelensis products assayed against Aedes aegypti (Diptera: Culicidae) in laboratory and outdoors at Rio de Janeiro, Brazil

Resistance of the dengue vector to temephos stimulated its substitution for Bacillus thuringiensis var. israelensis (Bti) since 2001 in Brazil. The persistence of the two Bti formulations employed at that time by the Health Ministry, Vectobac G and Aquabac G, was assayed under laboratory and outdoor conditions. Both formulations were tested at 0.2 g/10 liters of water, the same concentration applied in the field for vector control. The tests were done against Ae. aegypti third instar larvae (Rockefeller strain). In the laboratory, Vectobac G and Aquabac G caused at least 95% mortality until 101 and 45 days after treatment, respectively. In the outdoor assays, test containers of different materials were treated with either formulation and placed in a shaded area. Larvae were introduced each 3-6 days and mortality was recorded 24 and 48 hours later. In the first set of assays, performed in June 2001, mortality levels of 70% or more were attained for 2-5 weeks for both formulations in all containers. The exception was for the iron one that rusted, resulting in low mortality after seven days. In the second set of assays (August 2001), 70% mortality was attained for just 1-2 weeks for all the containers and both formulations.

Validation of QuEChERS method for organochlorine pesticides analysis in tamarind (Tamarindus indica) products: Peel, fruit and commercial pulp

In this study a citrate-buffered version of QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) method for determination of 14 organochlorine pesticides (OCPs) residues in tamarind peel, fruit and commercial pulp was optimized using gas chromatography (GC) coupled with electron-capture detector (ECD) and confirmation by GC tandem mass spectrometry (GC–MS/MS). Five procedures were tested based on the original QuEChERS method. The best one was achieved with increased time in ultrasonic bath. For the extract clean-up, primary secondary amine (PSA), octadecyl-bonded silica (C18) and magnesium sulphate (MgSO4) were used as sorbents for tamarind fruit and commercial pulp and for peel was also added graphitized carbon black (GCB). The samples mass was optimized according to the best recoveries (1.0 g for peel and fruit; 0.5 g for pulp). The method results showed the matrix-matched calibration curve linearity was r2 > 0.99 for all target analytes in all samples. The overall average recoveries (spiked at 20, 40 and 60 μg kg−1) have been considered satisfactory presenting values between 70 and 115% with RSD of 2–15 % (n = 3) for all analytes, with the exception of HCB (in peel sample). The ranges of limits of detection (LOD) and quantification (LOQ) for OCPs were for peel (LOD: 8.0–21 μg kg−1; LOQ: 27–98 μg kg−1); for fruit (LOD: 4–10 μg kg−1; LOQ: 15–49 μg kg−1) and for commercial pulp (LOD: 2–5 μg kg−1; LOQ: 7–27 μg kg−1). The method was successfully applied in tamarind samples being considered a rapid, sensitive and reliable procedure.

Excretion-secretion products and proteases from live Sporothrix schenckii yeast phase: immunological detection and cleavage of human IgG

Antigenic preparations from Sporothrix schenckii usually involve materials from mixed cultures of yeast and mycelia presenting cross-reactions with other deep mycoses. We have standardized pure yeast phase with high viability of the cells suitable to obtain specific excretion-secretion products without somatic contaminations. These excretion-secretion products were highly immunogenic and did not produce noticeable cross-reactions in either double immunodiffusion or Western blot. The antigenic preparation consists mainly of proteins with molecular weights between 40 and 70 kDa, some of them with proteolytic activity in mild acidic conditions. We also observed cathepsin-like activity at two days of culture and chymotrypsin-like activity at four days of culture consistent with the change in concentration of different secreted proteins. The proteases were able to cleave different subclasses of human IgG suggesting a sequential production of antigens and molecules that could interact and interfere with the immune response of the host.

Effects of Chlorophenoxy Herbicides and Their Main Transformation Products on DNA Damage and Acetylcholinesterase Activity

Persistent pesticide transformation products (TPs) are increasingly being detected among different environmental compartments, including groundwater and surface water. However, there is no sufficient experimental data on their toxicological potential to assess the risk associated with TPs, even if their occurrence is known. In this study, the interaction of chlorophenoxy herbicides (MCPA, mecoprop, 2,4-D and dichlorprop) and their main transformation products with calf thymus DNA by UV-visible absorption spectroscopy has been assessed. Additionally, the toxicity of the chlorophenoxy herbicides and TPs was also assessed evaluating the inhibition of acetylcholinesterase activity. On the basis of the results found, it seems that AChE is not the main target of chlorophenoxy herbicides and their TPs. However, the results found showed that the transformation products displayed a higher inhibitory activity when compared with the parent herbicides. The results obtained in the DNA interaction studies showed, in general, a slight effect on the stability of the double helix. However, the data found for 4-chloro-2-methyl-6-nitrophenol suggest that this transformation product can interact with DNA through a noncovalent mode.

Significance of Biogenic Amines in Cold-Smoked Fish and Their Relation to Microbiological Characteristics of Products Available in Portuguese Retail Markets

Studies on microbial characterization of cold-smoked salmon and salmon trout during cold storage were performed on samples available in the Portuguese market. Samples were also classified microbiologically according to guidelines for ready-to-eat (RTE) products. Further investigations on sample variability and microbial abilities to produce tyramine and histamine were also performed. The coefficient of variation for viable counts of different groups of microorganisms of samples collected at retail market point was high in the first 2 wk of storage, mainly in the Enterobacteriaceae group and aerobic plate count (APC), suggesting that microbiological characteristics of samples were different in numbers, even within the same batch from the same producer. This variation seemed to be decreased when storage and temperature were controlled under lab conditions. The numbers of Enterobacteriaceae were influenced by storage temperature, as indicated by low microbial numbers in samples from controlled refrigeration. Lactic acid bacteria (LAB) and Enterobacteriaceae were predominant in commercial products, a significant percentage of which were tyramine and less histamine producers. These results might be influenced by (1) the technological processes in the early stages of production, (2) contamination during the smoking process, and (3) conditions and temperature fluctuations during cold storage at retail market point of sale.

Inspeção e reabilitação de estruturas de betão armado

O setor da reabilitação em Portugal tem vindo a crescer consideravelmente ao longo dos últimos anos, demonstrando uma consciencialização da sociedade e das entidades competentes para definição de estratégias e planeamento, para uma manutenção das estruturas atempada de modo a prevenir patologias que provocam a sua degradação. O presente trabalho pretende fazer uma síntese das técnicas de proteção e reparação das estruturas de betão armado, efetuando também ensaios para determinação das causas das anomalias que levaram à sua reparação. O projeto de reabilitação deve seguir as recomendações indicadas nos Eurocódigos e norma EN1504 sobre produtos e sistemas para a proteção e reparação das estruturas de betão. Segundo esta norma explicam – se as principais causas de deterioração das estruturas de betão armado e os sintomas que estão na base dessa deterioração. Desta forma são descritos os métodos de intervenção, explicando o seu funcionamento e modo mais adequado de utilização com indicação dos produtos adequados para cada intervenção. Para aplicação do referido nos parágrafos anteriores desenvolveu-se uma proposta de fichas de inspeção, através de levantamento fotográfico e registo das anomalias e suas causas e ensaios não destrutivos de modo a perceber o estado atual da estrutura para uma melhor compreensão da metodologia de reparação a seguir