Computer integrated system for form-roll manufacture

Computer integrated manufacture has brought about great advances in manufacturing technology and its recognition is world wide. Cold roll forming of thin-walled sections, and in particular the design and manufacture of form-rolls, the special tooling used in the cold roll forming process, is but one such area where computer integrated manufacture can make a positive contribution. The work reported in this thesis, concerned with the development of an integrated manufacturing system for assisting the design and manufacture of form-rolls, was undertaken in collaboration with a leading manufacturer of thin-walled sections. A suit of computer programs, written in FORTRAN 77, have been developed to provide computer aids for every aspect of work in form-roll design and manufacture including cost estimation and stock control aids. The first phase of the development programme dealt with the establishment of CAD facilities for form-roll design, comprising the design of the finished section, the flower pattern, the roll design and the interactive roll editor program. Concerning the CAM facilities, dealt with in the second phase, an expert system roll machining processor and a general post-processor have been developed for considering the roll geometry and automatically generating NC tape programs for any required CNC lathe system. These programs have been successfully implemented, as an integrated manufacturing software system, on the VAX 11/750 super-minicomputer with graphics facilities for displaying drawings interactively on the terminal screen. The development of the integrated system has been found beneficial in all aspects of form-roll design and manufacture. Design and manufacturing lead times have been reduced by several weeks, quality has improved considerably and productivity has increased. The work has also demonstrated the promising nature of the expert systems approach to computer integrated manufacture.

Computer aided geometric design of form-rolls for NC manufacture

Conventional methods of form-roll design and manufacture for Cold Roll-Forming of thin-walled metal sections have been entirely manual, time consuming and prone to errors, resulting in inefficiency and high production costs. With the use of computers, lead time can be significantly improved, particularly for those aspects involving routine but tedious human decisions and actions. This thesis describes the development of computer aided tools for producing form-roll designs for NC manufacture in the CAD/CAM environment. The work was undertaken to modernise the existing activity of a company manufacturing thin-walled sections. The investigated areas of the activity, including the design and drafting of the finished section, the flower patterns, the 10 to 1 templates, and the rolls complete with pinch-difference surfaces, side-rolls and extension-contours, have been successfully computerised by software development . Data generated by the developed software can be further processed for roll manufacturing using NC lathes. The software has been specially designed for portability to facilitate its implementation on different computers. The Opening-Radii method of forming was introduced as a subsitute to the conventional method for better forming. Most of the essential aspects in roll design have been successfully incorporated in the software. With computerisation, extensive standardisation in existing roll design practices and the use of more reliable and scientifically-based methods have been achieved. Satisfactory and beneficial results have also been obtained by the company in using the software through a terminal linked to the University by a GPO line. Both lead time and productivity in roll design and manufacture have been significantly improved. It is therefore concluded that computerisation in the design of form-rolls for automation by software development is viable. The work also demonstrated the promising nature of the CAD/CAM approach.

The development and diffusion of industrial robots

This thesis describes the history of robots and explains the reasons for the international differences in robot diffusion, and the differences in the diffusion of various robot applications with reference to the UK. As opposed to most of the literature, diffusion is examined with an integrated and interdisciplinary perspective. Robot technology evolves from the interaction of development, supply and manufacture, adoption, and promotion. activities. Emphasis is given to the analysis of adoption, at present the most important limiting factor of robot advancement in the UK. Technical development is inferred from a comparison of surveys on equipment, and from the topics of ten years of symposia papers. This classification of papers is also used to highlight the international and institutional differences in robot development. Analysis of the growth in robot supply, manufacture, and use is made from statistics compiled. A series of interviews with users and potential users serves to illustrate the factors and implications of the adoption of different robot systems in the UK. Adoption pioneering takes place when several conditions exist: when the technology is compatible with the firm, when its advantages outweigh its disadvantages, and particularly when a climate exists which encourages the managerial involvement and the labour acceptance. The degree of compatibility (technical, methodological, organisational, and economic) and the consequences (profitability, labour impacts, and managerial effects) of different robot systems (transfer, manipulative, processing, and assembly) are determined by various aspects of manufacturing operations (complexity, automation, integration, labour tasks, and working conditions). The climate for adoption pioneering is basically determined by the performance of firms. The firms' policies on capital investment have as decisive a role in determining the profitability of robots as their total labour costs. The performance of the motor car industry and its machine builders explains, more than any other factor, the present state of robot advancement in the UK.

Development and validation of an instrument to predict online student success using faculty perceptions

Distance learning is growing and transforming educational institutions. The increasing use of distance learning by higher education institutions and particularly community colleges coupled with the higher level of student attrition in online courses than in traditional classrooms suggests that increased attention should be paid to factors that affect online student course completion. The purpose of the study was to develop and validate an instrument to predict community college online student course completion based on faculty perceptions, yielding a prediction model of online course completion rates. Social Presence and Media Richness theories were used to develop a theoretically-driven measure of online course completion. This research study involved surveying 311 community college faculty who taught at least one online course in the past 2 years. Email addresses of participating faculty were provided by two south Florida community colleges. Each participant was contacted through email, and a link to an Internet survey was given. The survey response rate was 63% (192 out of 303 available questionnaires). Data were analyzed through factor analysis, alpha reliability, and multiple regression. The exploratory factor analysis using principal component analysis with varimax rotation yielded a four-factor solution that accounted for 48.8% of the variance. Consistent with Social Presence theory, the factors with their percent of variance in parentheses were: immediacy (21.2%), technological immediacy (11.0%), online communication and interactivity (10.3%), and intimacy (6.3%). Internal consistency of the four factors was calculated using Cronbach's alpha (1951) with reliability coefficients ranging between .680 and .828. Multiple regression analysis yielded a model that significantly predicted 11% of the variance of the dependent variable, the percentage of student who completed the online course. As indicated in the literature (Johnson & Keil, 2002; Newberry, 2002), Media Richness theory appears to be closely related to Social Presence theory. However, elements from this theory did not emerge in the factor analysis.

The Creation and Evaluation of Novel Canine Training Aids for Cocaine Using Molecularly Encapsulated Sol-Gel Polymers and an Investigation of Canine Field Accuracy

Biological detectors, such as canines, are valuable tools used for the rapid identification of illicit materials. However, recent increased scrutiny over the reliability, field accuracy, and the capabilities of each detection canine is currently being evaluated in the legal system. For example, the Supreme Court case, State of Florida v. Harris, discussed the need for continuous monitoring of canine abilities, thresholds, and search capabilities. As a result, the fallibility of canines for detection was brought to light, as well as a need for further research and understanding of canine detection. This study is two-fold, as it looks to not only create new training aids for canines that can be manipulated for dissipation control, but also investigates canine field accuracy to objects with similar odors to illicit materials. It was the goal of this research to improve upon current canine training aid mimics. Sol-gel polymer training aids, imprinted with the active odor of cocaine, were developed. This novel training aid improved upon the longevity of currently existing training aids, while also provided a way to manipulate the polymer network to alter the dissipation rate of the imprinted active odors. The manipulation of the polymer network could allow handlers to control the abundance of odors presented to their canines, familiarizing themselves to their canine’s capabilities and thresholds, thereby increasing the canines’ strength in court. The field accuracy of detection canines was recently called into question during the Supreme Court case, State of Florida v. Jardines, where it was argued that if cocaine’s active odor, methyl benzoate, was found to be produced by the popular landscaping flower, snapdragons, canines will false alert to said flowers. Therefore, snapdragon flowers were grown and tested both in the laboratory and in the field to determine the odors produced by snapdragon flowers; the persistence of these odors once flowers have been cut; and whether detection canines will alert to both growing and cut flowers during a blind search scenario. Results revealed that although methyl benzoate is produced by snapdragon flowers, certified narcotics detection canines can distinguish cocaine’s odor profile from that of snapdragon flowers and will not alert.

Estrutura produtiva da agropecuária, ocupação e pobreza no estado de Minas Gerais no ano de 2010

This thesis aimed to contribute to the discussion about the relationship between agricultural production structure, occupation and poverty in Brazil, specifically in the state of Minas Gerais, in 2010. The issue of employment is becoming increasingly challenging in the face of ongoing modernization process in agriculture, capital intensive and labor saver looking levels ever higher production and productivity. The productive inclusion can be an effective way to exit from poverty (the work is often the only asset of the poor). In this sense, we sought to investigate what activities or groups of activities occupied a larger number of people and generated higher yields and can potentially have contributed to a lower incidence of poverty. The basis for primary data was the 2010 Population Census (microdata). To achieve the objectives we used descriptive analysis, Pearson correlation coefficients and quantile regressions. Among the main findings highlight that agriculture occupied more and generated higher overall income than ranching presented more precarious, despite having lower average incomes and income percentile values, greater heterogeneity and instability, as well as higher proportions of poor. Overall, commodities showed greater formalization and lower poor proportions. In the case of agriculture, commodities activities occupied less, generated lower mass income and middle-income (although income percentiles slightly larger and more informality) and had lower poverty indicators than non-commodity (more heterogeneous rents). In livestock, commodities had higher percentages of occupation, income (although middle-income values and percentiles slightly smaller), and smaller proportions of poor than non-commodity (more heterogenous). In terms of occupation and income stood out the farming activities unspecified (non-commodity), the coffee growing and cattle (commodities). The cultivation of coffee and cattle had the lowest poverty indicators. agricultural production diversification indicators showed positive correlations with the occupation in activities not commodities (only), but also with the proportion of poor, indigent and concentration of income. In addition, the occupation in not commodities showed positive correlations with poverty indicators. It is noteworthy that the occupations in soybeans, coffee and fruit showed negative correlation coefficients with the indicators of poverty, indigence and gini. Finally, among the agricultural activities, there was to go to occupied in agricultural activities not commodities for commodity would be 'more equalizer' (decreasing coefficients over the distribution of income) than for cattle. The occupation in livestock (mostly non-commodity) would generate greater impact on the lower income deciles, but their coefficients grow back in the last deciles, which shows its most perverse character. Among the activities that would affect more strongly the lower deciles and less the higher deciles stand out pig farming, poultry, citrus cultivation, coffee and sugar cane. The cattle and the cultivation of soy, had the highest rates, but they grow back in the last deciles, which shows a more wicked character.

The Influence of Creative Tourism on Sustainable Development of Tourism and Reduction of Seasonality – Case Study of Óbidos

Tourism remains one of the most fast growing and important industries in the world. It is hard to underestimate the importance and the spectrum of the benefits that tourism provides. On the other hand, nowadays, the increasing growth of tourism poses a range of challenges and problems that need to be solved. These challenges resonate in the emergence of the so called 'alternative' or sustainable forms of tourism, which deem to be an antidote against the harms the traditional forms of tourism cause to the environment and local communities. These new forms of tourism, among which is creative tourism, are reinforced by the new breed of tourists, who are no longer satisfied with the static offer of tourism but rather prefer the dynamic one. The present research shows on the case of Óbidos the potential of creative tourism to meet these new needs of modern tourists while also solving number of problems that many destinations face, namely seasonality in tourism, as well as how creative tourism contributes to the sustainable development of tourism.

The transition movement and food sovereignty: from local resilience to global engagement in food system transformation

The emergence of grassroots social movements variously preoccupied with a range of external threats, such as diminishing supplies of fossil energy or climate change, has led to increased interest in the production of local food. Drawing upon the notion of cognitive praxis, this article utilises transition as a trajectory guided by an overarching cosmology that brings together a broad social movement seeking a more resilient future. This ‘grand narrative’ is reinforced by ‘transition movement intellectuals’ who serve to shape an agenda of local preparedness in the face of uncertainty, rather than structural analysis of the global system. In this context, growing and producing food offers important multi-functional synergies by reconnecting people to place and its ecological endowments and serves to provide a vital element in civic mobilisation. Yet, local food could also become a means to build international solidarity in defence of food sovereignty and establish a global coalition opposed to the corporate agri-food agenda of biotechnologies, land grabbing and nutritional impoverishment.

Stabilisation of dehydrated nanoemulsions using sugar - protein matrices

There are numerous review papers discussing liquid nanoemulsions and how they compare to other emulsion systems. Little research is available on dried nanoemulsions. The objectives of this research were to (i) study the effect of varying the continuous phase of nanoemulsions with different carbohydrate/protein ratios on subsequent emulsion stability, and (ii) compare the physicochemical properties, lactose crystallisation properties, microstructure, and lipid oxidation of spray dried nanoemulsions compared to spray dried conventional emulsions having different water and sugar contents. Nanoemulsions containing sunflower oil (10% w/w), β-casein (2.5–10% w/w) and lactose or trehalose (10–17.5%) were produced following optimisation of the continuous phase by maximising and minimising viscosity and glass transition temperature (Tg’) using mixture design software. Increasing levels of β-casein from caused a significant increase in viscosity, particle size, and nanoemulsion stability, while resulting in a decrease in Tg’. Powders were made from spray drying emulsions/nanoemulsions consisting of lactose or a 70:30 mixture of lactose:sucrose (23.9%), sodium caseinate (5.1%) and sunflower oil (11.5%) in water. Nanoemulsions, produced by microfluidisation (100 MPa), had higher stability and lower viscosity than control emulsions (homogenization at 17 MPa) with lower solvent extractable free fat in the resulting powder. Partial replacement of lactose with sucrose decreased Tg and delayed Tcr. DVS and PLM showed that in powdered nanoemulsions, lactose crystallises faster than in powdered conventional emulsions. Microstructure of both powders (CLSM and cryo-SEM) showed different FGS in powders and different structure post lactose crystallisation. Powdered nanoemulsions had lower pentanal and hexanal (indicators of lipid oxidation) after 24 months storage due to their lower free fat and porosity, measured using a validated GC HS-SPME method, This research has shown the effect of altering the continuous phase of nanoemulsions on microstructure of spray dried nanoemulsions, which affects physical properties, sugar crystallisation, and lipid oxidation.

Genome analysis and characterisation of the exopolysaccharide produced by Bifidobacterium longum subsp. longum 35624™

The Bifibobacterium longum subsp. longum 35624™ strain (formerly named Bifidobacterium longum subsp. infantis) is a well described probiotic with clinical efficacy in Irritable Bowel Syndrome clinical trials and induces immunoregulatory effects in mice and in humans. This paper presents (a) the genome sequence of the organism allowing the assignment to its correct subspeciation longum; (b) a comparative genome assessment with other B. longum strains and (c) the molecular structure of the 35624 exopolysaccharide (EPS624). Comparative genome analysis of the 35624 strain with other B. longum strains determined that the sub-speciation of the strain is longum and revealed the presence of a 35624-specific gene cluster, predicted to encode the biosynthetic machinery for EPS624. Following isolation and acid treatment of the EPS, its chemical structure was determined using gas and liquid chromatography for sugar constituent and linkage analysis, electrospray and matrix assisted laser desorption ionization mass spectrometry for sequencing and NMR. The EPS consists of a branched hexasaccharide repeating unit containing two galactose and two glucose moieties, galacturonic acid and the unusual sugar 6-deoxy-L-talose. These data demonstrate that the B. longum 35624 strain has specific genetic features, one of which leads to the generation of a characteristic exopolysaccharide.

Factors affecting airport route development activity and performance

Airports have become increasingly active in route development as a means of attracting, growing and retaining air services. However, little is known about the different levels of route development activity at airports, or the extent to which route development activity affects performance. Based on the findings of a survey of 124 airports worldwide, this study finds that larger airports are significantly more active than smaller airports. It also finds that private airports are more active than public airports, and that airports in Europe are more active than airports in other world regions, although differences according to ownership and location are not significant. Route development activity has a significant positive effect on performance. Factors associated with the airport business environment (market turbulence, competitive intensity, market growth and airport constraints) were not found to have a significant moderating effect on the relationship between route development activity and performance. However, two factors were found to have a significant direct effect on performance; market growth has a significant positive effect while airport constraints have a significant negative effect.

Progress and Research in Cybersecurity - Supporting a resilient and trustworthy system for the UK

Executive summary
Digital systems have transformed, and will continue to transform, our world. Supportive government policy, a strong research base and a history of industrial success make the UK particularly well-placed to realise the benefits of the emerging digital society. These benefits have already been substantial, but they remain at risk. Protecting the benefits and minimising the risks requires reliable and robust cybersecurity, underpinned by a strong research and translation system.
Trust is essential for growing and maintaining participation in the digital society. Organisations earn trust by acting in a trustworthy manner: building systems that are reliable and secure, treating people, their privacy and their data with respect, and providing credible and comprehensible information to help people understand how secure they are.
Resilience, the ability to function, adapt, grow, learn and transform under stress or in the face of shocks, will help organisations deliver systems that are reliable and secure. Resilient organisations can better protect their customers, provide more useful products and services, and earn people’s trust.
Research and innovation in industry and academia will continue to make important contributions to creating this resilient and trusted digital environment. Research can illuminate how best to build, assess and improve digital systems, integrating insights from different disciplines, sectors and around the globe. It can also generate advances to help cybersecurity keep up with the continued evolution of cyber risks.
Translation of innovative ideas and approaches from research will create a strong supply of reliable, proven solutions to difficult to predict cybersecurity risks. This is best achieved by maximising the diversity and number of innovations that see the light of day as products.
Policy, practice and research will all need to adapt. The recommendations made in this report seek to set up a trustworthy, self-improving and resilient digital environment that can thrive in the face of unanticipated threats, and earn the trust people place in it.
Innovation and research will be particularly important to the UK’s economy as it establishes a new relationship with the EU. Cybersecurity delivers important economic benefits, both by underpinning the digital foundations of UK business and trade and also through innovation that feeds directly into growth. The findings of this report will be relevant regardless of how the UK’s relationship to the EU changes.
Headline recommendations
● Trust: Governments must commit to preserving the robustness of encryption, including end-to-end encryption, and promoting its widespread use. Encryption is a foundational security technology that is needed to build user trust, improve security standards and fully realise the benefits of digital systems.
● Resilience: Government should commission an independent review of the UK’s future cybersecurity needs, focused on the institutional structures needed to support resilient and trustworthy digital systems in the medium and longer term. A self-improving, resilient digital environment will need to be guided and governed by institutions that are transparent, expert and have a clear and widely-understood remit.
● Research: A step change in cybersecurity research and practice should be pursued; it will require a new approach to research, focused on identifying ambitious high-level goals and enabling excellent researchers to pursue those ambitions. This would build on the UK's existing strengths in many aspects of cybersecurity research and ultimately help build a resilient and trusted digital sector based on excellent research and world-class expertise.
● Translation: The UK should promote a free and unencumbered flow of cybersecurity ideas from research to practical use and support approaches that have public benefits beyond their short term financial return. The unanticipated nature of future cyber threats means that a diverse set of cybersecurity ideas and approaches will be needed to build resilience and adaptivity. Many of the most valuable ideas will have broad security benefits for the public, beyond any direct financial returns.

Settlement Duration and Materiality:Formal Chronological Models for the Development of Barnhouse, a Grooved Ware Settlement in Orkney

Radiocarbon dating and Bayesian chronological modelling, undertaken as part of the investigation by the Times of Their Lives project into the development of Late Neolithic settlement and pottery in Orkney, has provided precise new dating for the Grooved Ware settlement of Barnhouse, excavated in 1985–91. Previous understandings of the site and its pottery are presented. A Bayesian model based on 70 measurements on 62 samples (of which 50 samples are thought to date accurately the deposits from which they were recovered) suggests that the settlement probably began in the later 32nd century cal bc (with Houses 2, 9, 3 and perhaps 5a), possibly as a planned foundation. Structure 8 – a large, monumental structure that differs in character from the houses – was probably built just after the turn of the millennium. Varied house durations and replacements are estimated. House 2 went out of use before the end of the settlement, and Structure 8 was probably the last element to be abandoned, probably during the earlier 29th century cal bc. The Grooved Ware pottery from the site is characterised by small, medium-sized, and large vessels with incised and impressed decoration, including a distinctive, false-relief, wavy-line cordon motif. A considerable degree of consistency is apparent in many aspects of ceramic design and manufacture over the use-life of the settlement, the principal change being the appearance, from c. 3025–2975 cal bc, of large coarse ware vessels with uneven surfaces and thick applied cordons, and of the use of applied dimpled circular pellets. The circumstances of new foundation of settlement in the western part of Mainland are discussed, as well as the maintenance and character of the site. The pottery from the site is among the earliest Grooved Ware so far dated. Its wider connections are noted, as well as the significant implications for our understanding of the timing and circumstances of the emergence of Grooved Ware, and the role of material culture in social strategies.

Factors and mechanisms controlling soil organic carbon turnover in subsoils of agricultural sites

Two-third of the terrestrial C is stored in soils, and more than 50% of soil organic C (SOC) is stored in subsoils from 30 – 100 cm. Hence, subsoil is important as a source or sink for CO2 in the global carbon cycle. Especially the stable organic carbon (OC) is stored in subsoil, as several studies have shown that subsoil OC is of a higher average age than topsoil OC. However, there is still a lack of knowledge regarding the mechanisms of C sequestration and C turnover in subsoil. Three main factors are discussed, which possibly reduce carbon turnover rates in subsoil: Resource limitation, changes in the microbial community, and changes in gas conditions. The experiments conducted in this study, which aimed to elucidate the importance of the mentioned factors, focused on two neighbouring arable sites, with depth profiles differing in SOC stocks: One Colluvic Cambisol (Cam) with high SOC contents (8-12 g kg-1) throughout the profile and one Haplic Luvisol (Luv) with low SOC contents (3-4 g kg-1) below 30 cm depth. The first experiment was designed to gain more knowledge regarding the microbial community and its influence on carbon sequestration in subsoil. Soil samples were taken at four different depths on the two sites. Microbial biomass C (MBC) was determined to identify depth gradients in relation to the natural C availability. Bacterial and fungal residues as well as ergosterol were determined to quantify changes in the in the microbial community composition. Multi-substrate-induced-respiration (MSIR) was used to identify shifts in functional diversity of the microbial community. The MSIR revealed that substrate use in subsoil differed significantly from that in topsoil and also differed highly between the two subsoils, indicating a strong influence of resource limitations on microbial substrate use. Amino sugar analysis and the ratio of ergosterol to microbial biomass C showed that fungal dominance decreased with depth. The results clearly demonstrated that microbial parameters changed with depth according to substrate availability. The second experiment was an incubation experiment using subsoil gas conditions with and without the addition of C4 plant residues. Soil samples were taken from topsoil and subsoil of the two sites. SOC losses during the incubation, were not influenced by the subsoil gas conditions. Plant-derived C losses were generally stronger in the Cam (7.5 mg g-1), especially at subsoil gas conditions, than in the Luv (7.0 mg g-1). Subsoil gas conditions had no general effects on microbial measures with and without plant residue addition. However, the contribution of plant-derived MBC to total MBC was significantly reduced at subsoil gas conditions. This lead to the conclusion that subsoil gas conditions alter the metabolism of microorganisms but not the degradation of added plant residues is general. The third experiment was a field experiment carried out for two years. Mesh bags containing original soil material and maize root residues (C4 plant) were buried at three different depths at the two sites. The recovery of the soilbags took place 12, 18, and 24 months after burial. We determined the effects of these treatments on SOC, density fractions, and MBC. The mean residence time for maize-derived C was similar at all depths and both sites (403 d). MBC increased to a similar extent (2.5 fold) from the initial value to maximum value. This increase relied largely on the added maize root residues. However, there were clear differences visible in terms of the substrate use efficiency, which decreased with depth and was lower in the Luv than in the Cam. Hence freshly added plant material is highly accessible to microorganisms in subsoil and therefore equally degraded at both sites and depths, but its metabolic use was determined by the legacy of soil properties. These findings provide strong evidence that resource availability from autochthonous SOM as well as from added plant residues have a strong influence on the microbial community and its use of different substrates. However, under all of the applied conditions there was no evidence that complex substrates, i.e. plant residues, were less degraded in subsoil than in topsoil.

Food for Pollinators: Quantifying the Nectar and Pollen Resources of Urban Flower Meadows

Planted meadows are increasingly used to improve the biodiversity and aesthetic amenity value of urban areas. Although many ‘pollinator-friendly’ seed mixes are available, the floral resources these provide to flower-visiting insects, and how these change through time, are largely unknown. Such data are necessary to compare the resources provided by alternative meadow seed mixes to each other and to other flowering habitats. We used quantitative surveys of over 2 million flowers to estimate the nectar and pollen resources offered by two exemplar commercial seed mixes (one annual, one perennial) and associated weeds grown as 300m2 meadows across four UK cities, sampled at six time points between May and September 2013. Nectar sugar and pollen rewards per flower varied widely across 65 species surveyed, with native British weed species (including dandelion, Taraxacum agg.) contributing the top five nectar producers and two of the top ten pollen producers. Seed mix species yielding the highest rewards per flower included Leontodon hispidus, Centaurea cyanus and C. nigra for nectar, and Papaver rhoeas, Eschscholzia californica and Malva moschata for pollen. Perennial meadows produced up to 20x more nectar and up to 6x more pollen than annual meadows, which in turn produced far more than amenity grassland controls. Perennial meadows produced resources earlier in the year than annual meadows, but both seed mixes delivered very low resource levels early in the year and these were provided almost entirely by native weeds. Pollen volume per flower is well predicted statistically by floral morphology, and nectar sugar mass and pollen volume per unit area are correlated with flower counts, raising the possibility that resource levels can be estimated for species or habitats where they cannot be measured directly. Our approach does not incorporate resource quality information (for example, pollen protein or essential amino acid content), but can easily do so when suitable data exist. Our approach should inform the design of new seed mixes to ensure continuity in floral resource availability throughout the year, and to identify suitable species to fill resource gaps in established mixes.