Biomimetic sensors of molecularly-imprinted polymers for chlorpromazine determination

A new man-tailored biomimetic sensor for Chlorpromazine host-guest interactions and potentiometric transduction is presented. The artificial host was imprinted within methacrylic acid, 2-vinyl pyridine and 2-acrylamido-2-methyl-1-propanesulfonic acid based polymers. Molecularly imprinted particles were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. Slopes and detection limits ranged 51–67 mV/decade and 0.46–3.9 μg/mL, respectively, in steady state conditions. Sensors were independent from the pH of test solutions within 2.0–5.5. Good selectivity was observed towards oxytetracycline, doxytetracycline, ciprofloxacin, enrofloxacin, nalidixic acid, sulfadiazine, trimethoprim, glycine, hydroxylamine, cysteine and creatinine. Analytical features in flowing media were evaluated on a double-channel manifold, with a carrier solution of 5.0 × 10−2 mol/L phosphate buffer. Near-Nernstian response was observed over the concentration range 1.0 × 10−4 to 1.0 × 10−2 mol/L. Average slopes were about 48 mV/decade. The sensors were successfully applied to field monitoring of CPZ in fish samples, offering the advantages of simplicity, accuracy, automation feasibility and applicability to complex samples.

Ciprofloxacin-imprinted polymeric receptors as ionophores for potentiometric transduction

A 3D-mirror synthetic receptor for ciprofloxacin host–guest interactions and potentiometric transduction is presented. The host cavity was shaped on a polymeric surface assembled with methacrylic acid or 2-vinyl pyridine monomers by radical polymerization. Molecularly imprinted particles were dispersed in 2-nitrophenyl octyl ether and entrapped in a poly(vinyl chloride) matrix. The sensors exhibited a near-Nernstian response in steady state evaluations. Slopes and detection limits ranged from 26.8 to 50.0 mV decade−1 and 1.0 × 10−5 to 2.7 × 10−5 mol L−1, respectively. Good selectivity was observed for trimethoprim, enrofloxacin, tetracycline, cysteine, galactose, hydroxylamine, creatinine, ammonium chloride, sucrose, glucose, sulphamerazine and sulfadiazine. The sensors were successfully applied to the determination of ciprofloxacin concentrations in fish and in pharmaceuticals. The method presented offered the advantages of simplicity, accuracy, applicability to colored and turbid samples and automation feasibility, as well as confirming the use of molecularly imprinted polymers as ionophores for organic ion recognition in potentiometric transduction.

Molecularly-Imprinted Materials for Potentiometric Transduction: Application to the Antibiotic Enrofloxacin

Enrofloxacin (ENR) is an antimicrobial used both in humans and in food producing species. Its control is required in farmed species and their surroundings in order to reduce the prevalence of antibiotic resistant bacteria. Thus, a new biomimetic sensor enrofloxacin is presented. An artificial host was imprinted in specific polymers. These were dispersed in 2-nitrophenyloctyl ether and entrapped in a poly(vinyl chloride) matrix. The potentiometric sensors exhibited a near-Nernstian response. Slopes expressing mV/Δlog([ENR]/M) varied within 48–63. The detection limits ranged from 0.28 to 1.01 µg mL−1. Sensors were independent from the pH of test solutions within 4–7. Good selectivity was observed toward potassium, calcium, barium, magnesium, glycine, ascorbic acid, creatinine, norfloxacin, ciprofloxacin, and tetracycline. In flowing media, the biomimetic sensors presented good reproducibility (RSD of ± 0.7%), fast response, good sensitivity (47 mV/Δlog([ENR]/M), wide linear range (1.0 × 10−5–1.0 × 10−3 M), low detection limit (0.9 µg mL−1), and a stable baseline for a 5 × 10−2 M acetate buffer (pH 4.7) carrier. The sensors were used to analyze fish samples. The method offered the advantages of simplicity, accuracy, and automation feasibility. The sensing membrane may contribute to the development of small devices allowing in vivo measurements of enrofloxacin or parent-drugs.

Selective recognition in potentiometric transduction of amoxicillin by molecularly imprinted materials

The indiscriminate use of antibiotics in food-producing animals has received increasing attention as a contributory factor in the international emergence of antibiotic-resistant bacteria (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004). Numerous analytical methods for quantifying antibacterial residues in edible animal products have been developed over years (Woodward in Pesticide, veterinary and other residues in food, CRC Press, Boca Raton, 2004; Botsoglou and Fletouris in Handbook of food analysis, residues and other food component analysis, Marcel Dekker, Ghent, 2004). Being Amoxicillin (AMOX) one of those critical veterinary drugs, efforts have been made to develop simple and expeditious methods for its control in food samples. In literature, only one AMOX-selective electrode has been reported so far. In that work, phosphotungstate:amoxycillinium ion exchanger was used as electroactive material (Shoukry et al. in Electroanalysis 6:914–917, 1994). Designing new materials based on molecularly imprinted polymers (MIPs) which are complementary to the size and charge of AMOX could lead to very selective interactions, thus enhancing the selectivity of the sensing unit. AMOX-selective electrodes used imprinted polymers as electroactive materials having AMOX as target molecule to design a biomimetic imprinted cavity. Poly(vinyl chloride), sensors of methacrylic acid displayed Nernstian slopes (60.7 mV/decade) and low detection limits (2.9 × 10−5 mol/L). The potentiometric responses were not affected by pH within 4–5 and showed good selectivity. The electrodes were applied successfully to the analysis of real samples.

Hydrogeomechanics for rock engineering: coupling subsurface hydrogeomechanical assessement and hydrogeotechnical mapping on fracturated rock masses

The present work aims to achieve and further develop a hydrogeomechanical approach in Caldas da Cavaca hydromineral system rock mass (Aguiar da Beira, NW Portugal), and contribute to a better understanding of the hydrogeological conceptual site model. A collection of several data, namely geology, hydrogeology, rock and soil geotechnics, borehole hydraulics and hydrogeomechanics, was retrieved from three rock slopes (Lagoa, Amores and Cancela). To accomplish a comprehensive analysis and rock engineering conceptualisation of the site, a multi‐technical approach were used, such as, field and laboratory techniques, hydrogeotechnical mapping, hydrogeomechanical zoning and hydrogeomechanical scheme classifications and indexes. In addition, a hydrogeomechanical data analysis and assessment, such as Hydro‐Potential (HP)‐Value technique, JW Joint Water Reduction index, Hydraulic Classification (HC) System were applied on rock slopes. The hydrogeomechanical zone HGMZ 1 of Lagoa slope achieved higher hydraulic conductivities with poorer rock mass quality results, followed by the hydrogeomechanical zone HGMZ 2 of Lagoa slope, with poor to fair rock mass quality and lower hydraulic parameters. In addition, Amores slope had a fair to good rock mass quality and the lowest hydraulic conductivity. The hydrogeomechanical zone HGMZ 3 of Lagoa slope, and the hydrogeomechanical zones HGMZ 1 and HGMZ 2 of Cancela slope had a fair to poor rock mass quality but were completely dry. Geographical Information Systems (GIS) mapping technologies was used in overall hydrogeological and hydrogeomechanical data integration in order to improve the hydrogeological conceptual site model.

Taludes rochosos. Metodologias de inspecção e de avalialição de segurança. Caso de estudo das vertentes rochosas de S. Simão

A instabilização de taludes rochosos, com consequências mais ou menos gravosas, repete-se com frequência no território nacional. Os enquadramentos destes incidentes são diversos, sendo mais comum e mais visível a sua ocorrência em taludes adjacentes a vias de comunicação. No entanto, o fenómeno repete-se também em vertentes naturais, geralmente em alturas de pluviosidade mais prolongada e intensa. No presente trabalho reveem-se conceitos associados a maciços rochosos, nomeadamente as principais classificações geotécnicas e as diferentes tipologias de instabilidade em taludes rochosos. Desenvolve-se um caso de estudo de uma vertente localizada em S. Simão, concelho de Amarante. Percorrem-se as sucessivas fases de estudo, incluindo a realização da fotografia aérea com recurso a um veículo não tripulado, a geração de um modelo 3D de elevada precisão da vertente e a caracterização e a classificação dos diferentes afloramentos rochosos. Desenvolve-se uma metodologia de inspeção com a criação de dois conjuntos de fichas e propõe-se o agravamento da classificação das anomalias perante a simultaneidade de ocorrência de anomalias de idêntica gravidade e a hierarquização dos blocos potencialmente instáveis, de acordo com os respetivos níveis de gravidade (NGB). Recorre-se ao programa de modelação da queda de blocos, “Rocfall (4.0”, da “Rocscience”, a partir de trajetórias definidas no modelo 3D gerado e propõem-se soluções de reforço e de proteção da vertente.

Estudo e Projeto de Reabilitação dos Acessos aos Parques Eólicos da Iberwind

A Iberwind recebeu o aluno estagiário para a realização de um projeto de consultoria técnica focada nos acessos dos seus 31 parques eólicos presentes no território nacional. É apresentada a empresa, bem como todo o processo de construção e desenvolvimento de parques eólicos. O presente relatório de estágio foca-se, maioritariamente, na reabilitação de acessos a parques eólicos, debruçando-se sobre as especialidades de terraplenagens, drenagem e pavimentação, bem como as condicionantes geométricas. Verifica-se que com o passar dos anos, após a construção dos primeiros empreendimentos, começa a denotar-se a deterioração dos acessos aos mesmos. É, por isso, relevante e significativo o trabalho realizado no âmbito do estágio, por forma a avaliar as diversas necessidades de reabilitação e manutenção dos acessos a apresentar soluções globais. O levantamento de campo realizado cobriu todo o portefólio da empresa e documentou a totalidade das patologias relacionadas com as especialidades de pavimentação e drenagem. Executaram-se visitas a todos os parques, acompanhadas pelos operadores dos mesmos, e aliaram-se às mesmas entrevistas aos supervisores de zona com o intuito de aglomerar informação e contextualizar a problemática. Realizou-se uma proposta de reabilitação dos acessos em piores condições, o que levou à adjudicação da obra e acompanhamento de alguns trabalhos por parte do autor no presente ano. O trabalho realizado e detalhadamente documentado permitiu a criação de uma metodologia de inspeção e manutenção a ser implementada nos parques eólicos do grupo, de forma a reduzir custos e otimizar recursos a longo prazo. A metodologia consiste, de forma sintetizada, na inspecção periódica dos acessos de cada parque pelas equipas de campo e a definição das necessidades prioritárias de manutenção e reabilitação dos mesmos de maneira independente.

Relatório de estágio no departamento central de investigação e acção penal

The means of obtaining evidence, the amount of evidence obtained, the number of defendants related to each criminal case and the gravity of the crimes for which the magistrates of the Department are holders of penal action, define its real importance to the Rule of Law. I have deeply studied the subject of the institution of hierarchical intervention required by the assistant and the application of an opening statement by the defendant, starting from a hypothetical case, provided when the query of an investigation with the subject of the crime of active corruption, where this institution was called as a reaction to the archiving dispatch delivered by the Public Ministry. I have study about the implementation of the institution of provisional suspension of the process, specifically in the scope of fiscal criminality, analyzing the effective satisfaction of the purposes of the sentences in two slopes: general prevention and special prevention. I went for my first time to a Central Court of Criminal Instruction, where I attended the measures of inquiry and instructive debate of a process that culminated with the prosecution and pronunciation of the defendants. In addition to this criminal experience, I have deepened and consolidated the academic knowledge with the study of various criminal cases from various fields in the scope of criminality investigated by the Department. I could therefore check the basis of procedural delays, regarding to our legal system, especially in this type of crime, raising issues that I analyzed and discussed, always in a critical and academic way. I had the opportunity to attend and witness a seminar in the Lisbon Directorate of Finance as well of entering the Centre for Judicial Studies to attend a conference on the International Anti-Corruption Day. Focus on the investigatory importance of the international judicial cooperation, through the various organs, with special interest to EUROJUST. I comprehended the organization and functioning of these communitarian organs and means of communication of procedural acts, in particular, the rogatory letters and european arrest warrants. This involvement is motivated by the moratorium factor of the investigations where rogatory letters are necessary for the acquisition of evidence or information relevant to the good continuation of the process. For this reason the judicial cooperation through the relevant communitarian organs, translates a streamlined response between the competent judicial authorities of the Member States, through the National Member that integrates EUROJUST. This report aims to highlight some of the difficulties and procedural issues that Public Prosecutors of DCIAP and criminal police bodies that assist them, face in combating violent and organized crime, of national and transnational nature, of particular complexity, according to the specifics of criminal types.

New Sorex araneus karyotypes from Germany and the postglacial recolonization of central Europe

New G-banded karyotypes from populations of the common shrew Sorex araneus Linnaeus, 1758 provide a clearer picture of the distribution of chromosome races in central Europe. As expected according to their occurrence in neighbouring countries, the Jutland (kq, no), Laska (k/o) and Drnholec (ko, nr) races are also found in Germany. A new chromosome race "Rugen" (kq) is described from this Baltic Island. Together with the previously recorded races Ulm and Mooswald (kr), six chromosome races are now known from Germany. The resulting distribution pattern is characterized by high frequencies of different race-specific metacentrics at the periphery of the country and clines with decreasing frequencies towards the centre which is occupied by the Ulm race. This race is acrocentric for all chromosome arms involved in the observed race-specific fusions and represents a buffer between the surrounding, more metacentric races. According to the present distribution of these metacentrics, a scenario for the postglacial recolonization of central Europe by S. araneus populations on three different routes is proposed: from the east along the northern slopes of the Carpathian Arc, from the south-east along the Danube Valley and from the south-west through the Upper Rhine Valley.

Inheritance of ductile and brittle structures in the development of large rock slope instabilities: Examples from western Norway

The high density of slope failures in western Norway is due to the steep relief and to the concentration of various structures that followed protracted ductile and brittle tectonics. On the 72 investigated rock slope instabilities, 13 were developed in soft weathered mafic and phyllitic allochthons. Only the intrinsic weakness of such rocks increases the susceptibility to gravitational deformation. In contrast, the gravitational structures in the hard gneisses reactivate prominent ductile or/and brittle fabrics. At 30 rockslides along cataclinal slopes, weak mafic layers of foliation are reactivated as basal planes. Slope-parallel steep foliation forms back-cracks of unstable columns. Folds are specifically present in the Storfjord area, together with a clustering of potential slope failures. Folding increases the probability of having favourably orientated planes with respect to the gravitational forces and the slope. High water pressure is believed to seasonally build up along the shallow-dipping Caledonian detachments and may contribute to destabilization of the rock slope upwards. Regional cataclastic faults localized the gravitational structures at 45 sites. The volume of the slope instabilities tends to increase with the amount of reactivated prominent structures and the spacing of the latter controls the size of instabilities.

Trends in food availability in Switzerland, 1961-2007.

Trends in food availability in Switzerland were assessed using the Food and Agricultural Organization food balance sheets for the period 1961-2007. A relatively stable trend in the daily caloric supply was found: 3545 kcal/day in 1961 and 3465 kcal/day in 2007. Calories associated with carbohydrates decreased (slope±s.e.: -1.1±0.2 kcal/day/year), namely regarding cereals (-2.9±0.6 kcal/day/year) and fruit (-1.5±0.1 kcal/day/year), while the availability of sugars increased (1.2±0.5 kcal/day/year). In 1961, protein, fat, carbohydrates and alcohol represented 10.6, 33.5, 50.0 and 5.9% of total caloric supply, respectively; in 2007, the values were 10.8, 40.3, 43.7 and 5.2%. In 1961, palm, groundnut and sunflowerseed oil represented 3.4, 30.7 and 5.3% of total vegetable oils, respectively; in 2007, the values were 10.4, 3.7 and 31.6%. We conclude that between 1961 and 2007 total caloric availability remained relatively stable in Switzerland; the health effects of the increased and differing fat availability should be evaluated.

Some ecological effects of beaver upon the watersheds in the Porcupine Hills, Alberta /

This ecological investigation of the beaver (Castor canadensis canadensis Kuhl) was part of the Eastern Slopes (Alberta) Watershed Research program conducted during the summers of 1968 . 1969 . 1970. and 1971 . A soil particle size analysis indicated that soil heavy with clay was used by the beaver for construction purposes in the Porcupine Hills . Examples were given of the beaver controlling erosion with the construction of dams . and also causing erosion to occur . However . in general . the beaver slow down soil erosion and decrease the loss of soil from this region. The beaver utilized measureable amounts of herbaceous vegetation . However, the utilization of herbs by the beaver requires further investigation. A system of ex~sures and enclosures of herbaceous vegetation plots was used to study the utilization of sedges , grasses , and forbs . The beaver indicated stronger species preference for willow as compared to aspen . The size preference for willow was in the 1.0 to 10.0 centimeters basal diameter classes , while the beaver utilization of aspen indicated a preference for the largest trees with basal diameter greater than 20.0 centimeters. Willow was the most important plant in the low lying areas with regard to distribution, abundance and to produce sustained yield. The beaver used this plant for food and construction throughout the study area. The distribution of aspen was limited. and this species did not appear to produce more than one crop in the lifetime of a beaver colony. Nine out of 15 woody plant types were sampled by the beaver in this region. A plot-intercept transect technique was used for systematic vegetation sampling of the woody vegetation in six intensively studied watersheds. The beaver population of the Porcupine Hills region of SW-Alberta is believed to depend upon the chinooks. During the 1971 ground census, a total of 60 active beaver colonies were tallied on the 930 square kilometers large study area. The beaver of the region were not found to store large food caches during fall and winter, however, they are believed to collect feed periodically throughout the winter months. It was observed that the severe winter in 1968-69, reduced by 27 per cent the number of active beaver colonies within the study area. The Porcupine Hills region had 0.07 beaver colony per square kilometer in 1971, a low density of beaver colonies due to the rough topography of the area. However, the importance of the beaver ponds was somewhat clarified as they provide increased moisture, which lessens the fire damage, and store water for wildlife and cattle in the area. Meteorological data was collected by the author in collaboration with the Department of Transport.

Armourstone revetments : will standard design criteria prevent failure? /

Bank stabilization structures are used to prevent the loss of valuable land within the urban environment and the decision for the type of structure used depends on the properties of the stream. In the urban areas of Southern Ontario there is a preference for the use of armourstone blocks as bank stabilization. The armourstone revetment is a free standing stone structure with large blocks of stone layered vertically and offset from one another. During fieldwork at Forty Mile Creek in Grimsby, Ontario armourstone failure was identified by the removal of two stones within one column from the wall. Since the footer stones were still in place, toe scour was eliminated as a cause of failure. Through theoretical, field, and experimental work the process of suction has been identified as a mode of failure for the armourstone wall and the process of suction works similarly to quarrying large blocks of rock off bedrock streambeds. The theory of lateral suction has previously not been taken into consideration for the design of these walls. The physical and hydraulic evidence found in the field and studied during experimental work indicate that the armourstone wall is vulnerable to the process of suction. The forces exerted by the flow and the resistance of the block determine the stability of the armourstone block within the wall. The design of the armourstone wall, high surface velocities, and short pulses of faster flowing water within the profile could contribute to armourstone failure by providing the forces needed for suction to occur, therefore adjustments to the design of the wall should be made in order to limit the effect.

The sedimentology of the lower Silurian whirlpool sandstone in subsurface Lake Erie, Ontario

The lower Silurian Whirlpool Sandstone is composed of two main units: a fluvial unit and an estuarine to transitional marine unit. The lowermost unit is made up of sandy braided fluvial deposits, in shallow valleys, that flowed towards the northwest. The fluvial channels are largely filled by cross-bedded, well sorted, quartzose sands, with little ripple crosslaminated or overbank shales. Erosionally overlying this lower unit are brackish water to marine deposits. In the east, this unit consists of estuarine channels and tidal flat deposits. The channels consist of fluvial sands at the base, changing upwards into brackish and tidally influenced channelized sandstones and shales. The estuarine channels flowed to the southwest. Westwards, the unit contains backbarrier facies with extensive washover deposits. Separating the backbarrier facies from shoreface sandstone facies to the west, are barrier island sands represented by barrier-foreshore facies. The barrier islands are dissected by tidal inlets characterized by fining upward abandonment sequences. Inlet deposits are also present west of the barrier island, abandoned by transgression on the shoreface. The sandy marine deposits are replaced to the west by carbonates of the Manitoulin Limestone. During the latest Ordovician, a hiatus in crustal loading during the Taconic Orogeny led to erosional offloading and crustal rebound, the eroded material distributed towards the west, northwest and north as the terrestrial deposits of the fluvial Whirlpool. The "anti-peripheral bulge" of the rebound interfered with the peripheral bulge of the Michigan Basin, nulling the Algonquin Arch, and allowing the detritus of the fluvial Whirlpool to spread onto the Algonquin Arch. The Taconic Orogeny resumed in the earliest Silurian with crustal loading to the south and southeast, and causing tilting of the surface slope in subsurface Lake Erie towards the ii southwest. Lowstand terrestrial deposits were scoured into the new slope. The new crustal loading also reactivated the peripheral bulge of the Appalachian Basin, allowing it to interact with the bulge of the Michigan Basin, raising the Algonquin Arch. The crustal loading depressed the Appalachian basin and allowed transgression to occur. The renewed Algonquin Arch allowed the early Silurian transgression to proceed up two slopes, one to the east and one to the west. The transgression to the east entered the lowstand valleys and created the estuarine Whirlpool. The rising arch caused progradation of the Manitoulin carbonates upon shoreface facies of the Whirlpool Sandstone and upon offshore facies of the Cabot Head Formation. Further crustal loading caused basin subsidence and rapid transgression, abandoning the Whirlpool estuary in an offshore setting.

Socially Constructed Environmental Issues and Sport: A Content Analysis of Ski Resort Environmental Communications

Due to the impact of sport on the natural environment (UN, 2010), it is important to examine the interplay between environmental issues and sport (Hums, 2010, Mallen & Chard, 2011; Nauright & Pope, 2009; Ziegler, 2007). This research content analyzed 82 ski resort environmental communications (SRECs). These communications were rated for their prominence, breadth, and depth using the delineation of environmental issues provided by the Sustainable Slopes Program (SSP) Charter. This data was compared to the resorts’ degree of environmentally responsible action as rated by the Ski Area Citizens’ Coalition (SACC). An adaptation of Hudson and Miller's (2005) model was then used to classify the ski resorts as inactive, reactive, exploitive, or proactive in their environmental activities. Recommendations have been made for standardization and transparency in environmental disclosures and an environmental management system to aid ski resorts in moving from ad hoc processes to a systematic and comprehensive framework for improving environmental performance.