Proposta de um modelo para reduzir o GAP entre a definição e a execução de estratégias corporativas

Ao analisar o grande esforço e tempo dedicado ao planejamento da estratégia corporativa, nota-se que muitas empresas não apresentam resultados coerentes com a dedicação empregada. Um estudo realizado pela consultoria Marakon Associates (2004), sugere que, na média, apenas 60% dos resultados financeiros da empresa derivam do plano estratégico. O presente trabalho foca principalmente em incorporar a estratégia, refletida no mapa estratégico do balanced scorecard, às atividades e projetos da empresa, a fim de que sejam alcançados os resultados almejados. O objetivo é avaliar o modelo proposto, priorizando e balanceando os projetos de acordo com a estratégia planejada. Com isto, podese minimizar o gap entre a formulação e a execução da estratégia, para tanto, o modelo é composto de vários processos e métodos de avaliação, utilizando teorias relacionadas à estratégia e gestão de portfólio como referência. No presente trabalho, este modelo foi aplicado em uma empresa de telecomunicações situada no Brasil (para assegurar confidencialidade a empresa será tratada como "empresa X"). Porém, este modelo também poderá ser aplicado em empresas com características similares, desde que sejam efetuadas as customizações devidas. O ponto forte deste modelo é que engloba todas as dimensões da estratégia corporativa, tais quais, evolução organizacional, clientes e processos internos, e não somente a perspectiva financeira, como na maioria dos outros modelos. Por outro lado, o ponto fraco do modelo é a dependência em relação à qualidade da informação recebida para efetuar a análise, priorização e balanceamento do portfólio de projetos. Devido a esta característica inerente ao modelo, algumas metas de indicadores do balanced scorecard apresentaram diferenças em relação ao valor realizado. Conclui-se, com a utilização do modelo proposto, que os resultados obtidos são bem consistentes e alinhados com o plano estratégico do balanced scorecard.

Estimating the output gap: a SVAR approach

O presente trabalho tem por objetivo calcular o hiato do produto por meio da identificação de choques de demanda estimados por um SVAR e estudar, em um modelo de pequeno porte que utiliza essa medida de hiato, como se dá a interdependência entre a política fiscal, a política monetária e a inflação. Essa abordagem identifica uma maior sensibilidade da inflação à política fiscal do que nas estimativas usuais encontradas na literatura brasileira. Por outro lado, as estimativas para a sensibilidade da inflação à política monetária estão em linha com os resultados de outros trabalhos. A principal vantagem desta metodologia é a identificação de choques de demanda em momentos de mudança da trajetória de produto potencial, como recentemente ocorreu na economia brasileira. Além disso, ela aponta uma possível explicação para o recente paradoxo entre o baixo crescimento da atividade e a alta inflação.

Formation of social capital in Eastern Europe : explaining the gap vis-à-vis developed countries

Recent Eurobarometer survey data are used to document and explain the leveI of social capital in thirteen new members and fifteen current members of the European Union. Social capital in Eastern Europe - measured by participation in clubs and organization, intensity of networks or altruistic behavior - lags behind that in developed countries. The differences in individual-leveI determinants cannot fully account for the gap at the aggregate leveI. Once we also include aggregate measures of economic development and quality of institutions, the gap disappears. This implies that the EU enlargement will contribute to a convergence in social capital, assuming that it contributes to the economic and institutional development of Eastern European countries. A necessary condition is that both, formal and informal institutions and their interaction should be regarded in this process.

The Brazilian venture capital industry and its strategic role in closing the financing gap of SMEs

This discussion paper is a contribution of the Brazilian Government to the 2006 Annual Conference of the OECD High-level Conference on "Better Financing for Entrepreneurship and SMEs" to be held in Brasilia, Brazil on 27-30 March 2006. It has been prepared by The Center for Studies in Private Equity and Venture Capital of EAESP-Fundação Getúlio Vargas under the auspices of ABDI – Agência Brasileira para o Desenvolvimento Industrial – an agency of the Ministry of Industrial Development and Foreign Trade, in cooperation with ABVCAP – The Brazilian Association of Private Equity and Venture Capital

Determinação de eletrólitos, gases sanguíneos, osmolalidade, hematócrito, hemoglobina, base titulável e anion gap no sangue venoso de equinos destreinados submetidos a exercício máximo e submáximo em esteira rolante

Estudaram-se as alterações nos eletrólitos, nos gases sanguíneos, na osmolalidade, no hematócrito, na hemoglobina, nas bases tituláveis e no anion gap no sangue venoso de 11 equinos da raça Puro Sangue Árabe, destreinados, submetidos a exercício máximo e submáximo em esteira rolante. Esses animais passaram por período de três dias de adaptação à esteira rolante e posteriormente realizaram dois exercícios testes, um de curta e outro de longa duração. Foram coletadas amostras de sangue venoso antes, imediatamente após e 30 minutos após o término dos exercícios. Após a realização do exercício máximo, observou-se diminuição significativa no pHv, na PvCO2, no HCO3, na cBase além de elevação no AG. Detectou-se também aumento do K+, do Ht e da Hb. Ao final do exercício submáximo, constatou-se somente aumento significativo no pHv, na cBase, na SatvO2 e na PvO2. Conclui-se que os equinos submetidos a exercício máximo desenvolveram acidose metabólica e alcalose respiratória compensatória, hipercalemia e aumento nos valores de hematócrito e hemoglobina. No exercício submáximo, os animais apresentaram alcalose metabólica hipoclorêmica e não ocorreram alterações no equilíbrio hidroeletrolítico.

Gestão do Conhecimento baseado na análise de GAP de competências: Um estudo de caso do DETRAN-RN

The Knowledge Management in organizations is a continuous process of learning that is given by the integration of data, information and the ability of people to use this information. The Management Skills is concerned to understand the powers of officials in the face of organizational skills (teams) and professionals (or tasks positions) want. Joints are located in the greater context of the economy of organizatio s and have the same assumption: that the possession of scarce resources, valuable and difficult to imitate gives the organization a competitive advantage. In this sense, this thesis proposes a model of knowledge management based on analysis of GAP of powers, namely the gap between the skills needed to reach the expected performance and skills already available in the organization, officials and trainees of Coordination of Registration of conductors of DETRAN-RN. Using the method of survey research could make an analysis of academic skills, techniques and emotional individual and a team of officials and trainees, identifying levels of GAP's competence in that sector of the organization and suggest a plan for training , A level of expertise for each sector of coordination, and propose a model for Knowledge Management to help the management of GAP's identified

Separating interface state response from parasitic effects in conductance measurements on organic metal-insulator-semiconductor capacitors

A simple model is developed for the admittance of a metal-insulator-semiconductor (MIS) capacitor which includes the effect of a guard ring surrounding the Ohmic contact to the semiconductor. The model predicts most of the features observed in a MIS capacitor fabricated using regioregular poly(3-hexylthiophene) as the active semiconductor and polysilsesquioxane as the gate insulator. In particular, it shows that when the capacitor is driven into accumulation, the parasitic transistor formed by the guard ring and Ohmic contact can give rise to an additional feature in the admittance-voltage plot that could be mistaken for interface states. When this artifact and underlying losses in the bulk semiconductor are accounted for, the remaining experimental feature, a peak in the loss-voltage plot when the capacitor is in depletion, is identified as an interface (or near interface) state of density of similar to 4 x 10(10) cm(-2) eV(-1). Application of the model shows that exposure of a vacuum-annealed device to laboratory air produces a rapid change in the doping density in the channel region of the parasitic transistor but only slow changes in the bulk semiconductor covered by the gold Ohmic contact. (C) 2008 American Institute of Physics.

Determining the interfacial density of states in metal-insulator-semiconductor devices based on poly(3-hexylthiophene)

Low frequency admittance measurements are used to determine the density of interface states in metal-insulator-semiconductor diodes based on the unintentionally doped, p-type semiconductor poly(3-hexylthiophene). After vacuum annealing at 90 degrees C, interface hole trapping states are shown to be distributed in energy with their density decreasing approximately linearly from similar to 20x10(10) to 5x10(10) cm(-2) eV(-1) over an energy range extending from 0.05 to 0.25 eV above the bulk Fermi level. (c) 2008 American Institute of Physics.

Filmes nanométricos de FeN e ALN crescidos por sputtering e aplicações do efeito peltier

This study will show the capability of the reactive/nonreactive sputtering (dc/rf) technique at low power for the growth of nanometric thin films from magnetic materials (FeN) and widegap semiconductors (AlN), as well as the technological application of the Peltier effect using commercial modules of bismuth telluride (Bi2Te3). Of great technological interest to the high-density magnetic recording industry, the FeN system represents one of the most important magnetic achievements; however, diversity of the phases formed makes it difficult to control its magnetic properties during production of devices. We investigated the variation in these properties using ferromagnetic resonance, MOKE and atomic force microscopy (AFM), as a function of nitrogen concentration in the reactive gas mixture. Aluminum nitride, a component of widegap semiconductors and of considerable interest to the electronic and optoelectronic industry, was grown on nanometric thin film for the first time, with good structural quality by non-reactive rf sputtering of a pure AlN target at low power (≈ 50W). Another finding in this study is that a long deposition time for this material may lead to film contamination by materials adsorbed into deposition chamber walls. Energy-dispersive X-ray (EDX) analysis shows that the presence of magnetic contaminants from previous depositions results in grown AlN semiconductor films exhibiting magnetoresistance with high resistivity. The Peltier effect applied to commercially available compact refrigeration cells, which are efficient for cooling small volumes, was used to manufacture a technologically innovative refrigerated mini wine cooler, for which a patent was duly registered

Polaritons de exciton em super-redes semicondutoras

In this work we study the spectrum (bulk and surface modes) of exciton-polaritons in infinite and semi-infinite binary superlattices (such as, ···ABABA···), where the semiconductor medium (A), whose dielectric function depends on the frequency and the wavevector, alternating with a standard dielectric medium B. Here the medium A will be modeled by a nitride III-V semiconductor whose main characteristic is a wide-direct energy gap Eg. In particular, we consider the numerical values of gallium nitride (GaN) with a crystal structure wurtzite type. The transfer-matrix formalism is used to find the exciton-polariton dispersion relation. The results are obtained for both s (TE mode: transverse electric) and p (TM mode: transverse magnetic) polarizations, using three diferent kind of additional boundary conditions (ABC1, 2 e 3) besides the standard Maxwell's boundary conditions. Moreover, we investigate the behavior of the exciton-polariton modes for diferent ratios of the thickness of the two alternating materials forming the superlattice. The spectrums shows a confinement of the exciton-polariton modes due to the geometry of the superlattice. The method of Attenuated Total Reflection (ATR) and Raman scattering are the most adequate for probing this excitations

Effect of the Insertion and Polymerization Technique in Composite Resin Restorations: Analysis of Marginal Gap by Atomic Force Microscopy

This in vitro study evaluated the marginal gap at the composite tooth/resin interface in class V cavities under the influence of two insertion techniques and a curing system by means of atomic force microscopy (AFM). Forty enamel and dentin cavities were prepared on the buccal surface in bovine teeth with quadratic forms measuring 2 mm X 2 mm and depth of 1.5 mm. The teeth were then divided into four groups: group A, 10 cavities were restored in one increment, light cured by halogen light; group B, 10 cavities filled with bulk filling, light cured by the light emitting diodes (LED); group C, 10 cavities were restored by the incremental technique, light cured by halogen light; group D, 10 cavities were restored by the incremental technique, light cured by the LED. The teeth underwent the polishing procedure and were analyzed by AFM for tooth/restoration interface evaluation. The data were compared between groups using the nonparametric Kruskall-Wallis and Mann-Whitney tests (p < 0.05). The results showed a statistically significant difference between groups A and B and groups A and C. It was concluded that no insertion and polymerization technique was able to completely seal the cavity.

Gap size measurement: the proposal of a new field method

In the tropical Atlantic Forest, 42 canopy gaps had their areas estimated using four different field methods of measurement: Runkle, Brokaw and Green [Runkle, J.R., 1981. Gap formation in some old-growth forests of the eastern United States. Ecology 62, 1041-1051; Brokaw, N.V.L., 1982. The definition of treefall gap and its effect on measures of forest dynamics. Biotropica 14, 158-160; Green, P.T., 1996. Canopy Gaps in rain forest on Christmas Island, Indian Ocean: size distribution and methods of measurement. J. Trop. Ecol. 12, 427-434] and a new method proposed in this work. It was found that within the same gap delimitation, average gap size varied from 56.0 up to 88.3 m(3) while total sum of gap area varied from 2351.3 to 3707.9 m(3) Differences among all methods and between pairs of method proved to be statistically significant. As a consequence, gap size-class distribution was also different between methods. When one method is held as a standard, deviation on average values of gap size ranged between 11.8 and 59.7% as deviations on single gap size can reach 172.8%. Implications on forest dynamics were expressed by the forest turnover rate that was 24% faster or 15% slower depending on the method adopted for gap measurement. Based on my results and on methods' evaluation, the use of a new method is proposed here for future research involving the measure of gap size in forest ecosystems. Finally, it is concluded that forest comparisons disregarding the influence of different methods of gap measurement should be reconsidered. (c) 2005 Elsevier B.V. All rights reserved.

Gap disturbance regime and composition in the Atlantic Montane Rain Forest: the influence of topography

In the Atlantic Montane Rain Forest of south-eastern Brazil, a field study was carried out to describe the forest disturbance regime, analyse canopy gap composition and evaluate the influence of habitat parameters on gap tree species composition. We characterized canopy gaps considering the group of variables as follows: area, type and number of tree/branch falls, topographic position, soil coverage and surrounding canopy trees. Gap composition was assessed at species level by measuring all individuals inside gaps higher than one meter. Mean gap area of the 42 canopy gaps analysed was 71.9 +/- 9.0 m(2) (mean +/- SE). Out of the studied gaps, 35.7% were created by uprooted and by snapped trees, 16.7% by dead-standing trees and 11.9% by the fall of large branches. The disturbance regime was characterized by gap openings predominantly smaller than 150 m(2) and by spatial patterning related to topography. Ridges had smaller gaps and higher proportions of gaps created by branch falls; slopes had bigger gaps generally created by uprooting events. The more abundant and frequent species were shade tolerant and the more species-rich families found inside gaps did not differ from the forest as a whole. Pioneer species were rare and restricted to medium and large size classes. The Indicator Species Analysis and the Canonical Correspondence Analysis indicated gap area, topography and the percentage of soil cover by the genera Calathea and Ctenanthe were the predominant variables correlated with woody species distribution. So, topography emerged as an important issue not only to the gap disturbance regime, but also to gap colonization. In respect to the influence of gap processes on the Atlantic Montane Rain Forest regeneration, our results support the view that canopy gap events may not be working as promoters of community wide floristic shifts.