Treatment plan complexity metrics for predicting IMRT pre-treatment quality assurance results

The planning of IMRT treatments requires a compromise between dose conformity (complexity) and deliverability. This study investigates established and novel treatment complexity metrics for 122 IMRT beams from prostate treatment plans. The Treatment and Dose Assessor software was used to extract the necessary data from exported treatment plan files and calculate the metrics. For most of the metrics, there was strong overlap between the calculated values for plans that passed and failed their quality assurance (QA) tests. However, statistically significant variation between plans that passed and failed QA measurements was found for the established modulation index and for a novel metric describing the proportion of small apertures in each beam. The ‘small aperture score’ provided threshold values which successfully distinguished deliverable treatment plans from plans that did not pass QA, with a low false negative rate.

Development of a dose assessment tool for the auditing of radiotherapy treatment dosimetric quality

The reporting and auditing of patient dose is an important component of radiotherapy quality assurance. The manual extraction of dose-volume metrics is time consuming and undesirable when auditing the dosimetric quality of a large cohort of patient plans. A dose assessment application was written to overcome this, allowing the calculation of various dose-volume metrics for large numbers of plans exported from treatment planning systems. This application expanded on the DICOM-handling functionality of the MCDTK software suite. The software extracts dose values in the volume of interest by using a ray casting point-in-polygon algorithm, where the polygons have been defined by the contours in the RTSTRUCT file...

Effect of vertical misalignment of adjacent sleepers on the increase in dynamic loads around rail joints

In spite of the extensive usage of continuous welded rails, a number of rail joints still exist in the track. Although a number of them exist as part of turnouts in the yards where the speed is not of concern, the Insultated Rail Joints (IRJs) that exist in ballasted tracks remain a source of significant impact loading. A portion of the dynamic load generated at the rail joints due to wheel passage is transmitted to the support system which leads to permanent settlements of the ballast layer with subsequent vertical misalignment of the sleepers around the rail joints. The vertical misalignment of the adjacent sleepers forms a source of high frequency dynamic load raisers causing significant maintenance work including localised grinding of railhead around the joint, re-alignment of the sleepers and/or ballast tamping or track component renewals/repairs. These localised maintenance activities often require manual inspections and disruptions to the train traffic loading to significant costs to the rail industry. Whilst a number of studies have modelled the effect of joints as dips, none have specifically attended to the effect of vertical misalignment of the sleepers on the dynamic response of rail joints. This paper presents a coupled finite element track model and rigid body track-vehicle interaction model through which the effects of vertical of sleepers on the increase in dynamic loads around the IRJ are studied. The finite element track model is employed to determine the generated dip from elastic deformations as well as the vertical displacement of sleepers around the joint. These data (dip and vertical misalignments) are then imported into the rigid body vehicle-track interaction model to calculate the dynamic loads.

Surface reconstruction of wheat leaf morphology from three-dimensional scanned data

Realistic virtual models of leaf surfaces are important for a number of applications in the plant sciences, such as modelling agrichemical spray droplet movement and spreading on the surface. In this context, the virtual surfaces are required to be sufficiently smooth to facilitate the use of the mathematical equations that govern the motion of the droplet. While an effective approach is to apply discrete smoothing D2-spline algorithms to reconstruct the leaf surfaces from three-dimensional scanned data, difficulties arise when dealing with wheat leaves that tend to twist and bend. To overcome this topological difficulty, we develop a parameterisation technique that rotates and translates the original data, allowing the surface to be fitted using the discrete smoothing D2-spline methods in the new parameter space. Our algorithm uses finite element methods to represent the surface as a linear combination of compactly supported shape functions. Numerical results confirm that the parameterisation, along with the use of discrete smoothing D2-spline techniques, produces realistic virtual representations of wheat leaves.

Experienced-based management of IMRT quality assurance

This study uses the detailed, bulk analyses of a set of treatment planning and quality assurance data from one radiotherapy centre to provide an illuminating example of the provision evidence-based advice on the management, and potential reduction, of an IMRT quality assurance workload.

Regulatory interplay between pap operons in uropathogenic Escherichia coli

Pathogenic bacteria have a large repertoire of surface organelles involved in adherence, motility and protein export, but how individual bacteria co-ordinate surface organelle expression to prevent interference and excessive immune stimulation is unclear. Phase variation is a mechanism by which expression of surface factors is limited to a fraction of the bacterial population; however, the presence of multiple homologous surface structures controlled by related mechanisms and regulators antagonizes the independent expression achieved by phase variation. To investigate whether other mechanisms have evolved to sort out the bacterial cell surface, we examined regulatory cross-talk between multiple phase-variable pyelonephritis-associated pili (pap) operons in Escherichia coli isolates associated with urinary tract infections. Allelic variation identified in the regulatory regions and regulators acts synergistically to limit coexpression of homologous fimbrial operons. In particular, there is evidence that papI is under positive selection and PapI variants displayed differences in their capacity to activate related pap operons. Alleles of the high-affinity binding site for PapB were shown to contain a variable number of (T/A)3 repeats occurring every 9 bp that altered the sensitivity of pap operon activation. Taken together with other examples of surface organelle cross-talk, we illustrate how this regulation could promote sequential expression.

Regulating Work

This chapter examines the regulation of ‘work’: principally the circumstances in which labour is engaged and the conditions attaching to the work relationships which are consequently formed and carried on. Fundamentally, this is the subject area labelled ‘labour law’in modern-day legal, academic, and professional discourse. This chapter also explores how some issues in the regulatory literature impact upon this field. One of the central arguments in this chapter is that instrumental regulation in the field of labour law is not a relatively modern phenomenon. Rather, the reading of the historical literature pertaining to labour under earlier economic and social conditions shows that the instrumental regulation of the labour market by the state and its courts has been the dominant form of law in this field for centuries. Readership: academics working on any area of law or in socio-legal research

Challenging the myth of an "epidemic" of common mental disorders : trends in the global prevalence of anxiety and depression between 1990 and 2010

Background Anxiety disorders and major depressive disorder (MDD) are common and disabling mental disorders. This paper aims to test the hypothesis that common mental disorders have become more prevalent over the past two decades. Methods We conducted a systematic review of prevalence, remission, duration, and excess mortality studies for anxiety disorders and MDD and then used a Bayesian meta-regression approach to estimate point prevalence for 1990, 2005, and 2010. We also conducted a post-hoc search for studies that used the General Health Questionnaire (GHQ) as a measure of psychological distress and tested for trends to present a qualitative comparison of study findings. Results This study found no evidence for an increased prevalence of anxiety disorders or MDD. While the crude number of cases increased by 36%, this was explained by population growth and changing age structures. Point prevalence of anxiety disorders was estimated at 3.8% (3.6-4.1%) in 1990 and 4.0% (3.7-4.2%) in 2010. The prevalence of MDD was unchanged at 4.4% in 1990 (4.2-4.7%) and 2010 (4.1-4.7%). However, 8 of the 11 GHQ studies found a significant increase in psychological distress over time. Conclusions The perceived "epidemic" of common mental disorders is most likely explained by the increasing numbers of affected patients driven by increasing population sizes. Additional factors that may explain this perception include the higher rates of psychological distress as measured using symptom checklists, greater public awareness, and the use of terms such as anxiety and depression in a context where they do not represent clinical disorders.

The regional distribution of anxiety disorders : implications for the Global Burden of Disease Study, 2010

Anxiety disorders are increasingly acknowledged as a global health issue however an accurate picture of prevalence across populations is lacking. Empirical data are incomplete and inconsistent so alternate means of estimating prevalence are required to inform estimates for the new Global Burden of Disease Study 2010. We used a Bayesian meta-regression approach which included empirical epidemiological data, expert prior information, study covariates and population characteristics. Reported are global and regional point prevalence for anxiety disorders in 2010. Point prevalence of anxiety disorders differed by up to three-fold across world regions, ranging between 2.1% (1.8-2.5%) in East Asia and 6.1% (5.1-7.4%) in North Africa/Middle East. Anxiety was more common in Latin America; high income regions; and regions with a history of recent conflict. There was considerable uncertainty around estimates, particularly for regions where no data were available. Future research is required to examine whether variations in regional distributions of anxiety disorders are substantive differences or an artefact of cultural or methodological differences. This is a particular imperative where anxiety is consistently reported to be less common, and where it appears to be elevated, but uncertainty prevents the reporting of conclusive estimates.

Examination of the properties of IMRT and VMAT beams and evaluation against pre-treatment quality assurance results

This study aimed to provide a detailed evaluation and comparison of a range of modulated beam evaluation metrics, in terms of their correlation with QA testing results and their variation between treatment sites, for a large number of treatments. Ten metrics including the modulation index (MI), fluence map complexity (FMC), modulation complexity score (MCS), mean aperture displacement (MAD) and small aperture score (SAS) were evaluated for 546 beams from 122 IMRT and VMAT treatment plans targeting the anus, rectum, endometrium, brain, head and neck and prostate. The calculated sets of metrics were evaluated in terms of their relationships to each other and their correlation with the results of electronic portal imaging based quality assurance (QA) evaluations of the treatment beams. Evaluation of the MI, MAD and SAS suggested that beams used in treatments of the anus, rectum, head and neck were more complex than the prostate and brain treatment beams. Seven of the ten beam complexity metrics were found to be strongly correlated with the results from QA testing of the IMRT beams (p < 0.00008). For example, Values of SAS (with MLC apertures narrower than 10 mm defined as “small”) less than 0.2 also identified QA passing IMRT beams with 100% specificity. However, few of the metrics are correlated with the results from QA testing of the VMAT beams, whether they were evaluated as whole 360◦ arcs or as 60◦ sub-arcs. Select evaluation of beam complexity metrics (at least MI, MCS and SAS) is therefore recommended, as an intermediate step in the IMRT QA chain. Such evaluation may also be useful as a means of periodically reviewing VMAT planning or optimiser performance.

John Andrews : Architecture a Performing Art

The distinguished Australian architect surveys his career and examines how his architectural theories are expressed in his designs.

Driving toward user-centered engineering in automotive design

In an industry worth more than €500 billion annually, producing more than 80 million vehicles worldwide each year and consisting of over 50 major manufacturers worldwide, the automotive industry represents a lucrative but highly competitive manufacturing industry (Deloitte, 2009a; European Automobile Manufacturers Association, 2012). With sales falling in Europe in 2013 for the sixth consecutive year (Boston and Curtin, 2014), automotive manufacturers are increasingly turning to new strategies to retain their share of sales in a contracting market. Some strategies have focused on the industry approach to manufacturing, namely, a technically focused push for a build-toorder process rather than the current build-to-stock approach in order to reduce overall value-chain costs and to increase efficiency (Parry and Roehrich, 2013, p. 13). However, others stress a more customer-orientated approach, striving to develop products that meet customer requirements (Oliver Wyman Group, 2007).