Miniprojeto para ensino de química geral experimental baseado na fermentação do caldo de cana-de-açúcar

This paper describes a five-week mini-project for a general chemistry laboratory course. Activities are included preparations of ethanol and sucrose solutions, calculation of concentrations, determination of densities with densimeters, sugarcane juice fermentation with CO2 capture in alkaline solution, distillation, and determination of amounts of ethanol and CO2 formed. Abilities and concepts normally present in practical general chemistry courses are covered: use of balances, volumetric glassware and densimeters, preparation of solutions, performing of dilutions, determination of solution densities, observation of chemical reactions, stoichiometric calculations, separation of mixtures, and titration.

A fração volátil das aguardentes de cana produzidas no Brasil

The volatile fraction of sugar cane spirits plays a key role in the quality and acceptance of these beverages. The composition of this fraction is dependent on the way sugar cane collection, fermentation, distillation and aging are carried out. The materials used in these processes strongly influence chemical composition. Acetic acid, acetaldehyde, ethyl acetate, ethanol, 2.3-butanedione, n-propanol, 3-methyl-buthanol and isobuthanol were the major volatiles in spirits. Dimethyl sulfide and n-propanol impaired beverage flavor. Ethyl octanoate, 1.1-diethoxy-ethane, 2-phenylethanol and 3-methyl-butanol were important aroma contributors. Ageing allows the extraction of flavor-active components (e.g., phenolic compounds) from wood.

Elementos traço em material particulado atmosférico de uma região agroindustrial do sudeste do Brasil

Trace element concentrations were measured in atmospheric particulate matter collected in 2009 and 2010, in a Brazilian region influenced by pre-harvest burning of sugar cane crops. For coarse particles, high concentrations of Al, Fe, K and Ca suggested that re-suspended soil dust was the main source of aerosol trace elements, subsequently confirmed by XRD analysis. High levels of K, Zn, As, Cd and Pb were found in fine particles, confirming the contribution of biomass burning and vehicle emissions, whereas Na, Al, K, Fe and Zn were the representative elements in ultrafine particles, influenced by a diversity of sources.

Química e sustentabilidade: novas fronteiras em biocombustíveis

This contribution discusses the state of the art and the challenges in producing biofuels, as well as the need to develop chemical conversion processes of CO2 in Brazil. Biofuels are sustainable alternatives to fossil fuels for providing energy, whilst minimizing the effects of CO2 emissions into the atmosphere. Ethanol from fermentation of simple sugars and biodiesel produced from oils and fats are the first-generation of biofuels available in the country. However, they are preferentially produced from edible feedstocks (sugar cane and vegetable oils), which limits the expansion of national production. In addition, environmental issues, as well as political and societal pressures, have promoted the development of 2nd and 3rd generation biofuels. These biofuels are based on lignocellulosic biomass from agricultural waste and wood processing, and on algae, respectively. Cellulosic ethanol, from fermentation of cellulose-derived sugars, and hydrocarbons in the range of liquid fuels (gasoline, jet, and diesel fuels) produced through thermochemical conversion processes are considered biofuels of the new generation. Nevertheless, the available 2nd and 3rd generation biofuels, and those under development, have to be subsidized for inclusion in the consumer market. Therefore, one of the greatest challenges in the biofuels area is their competitive large-scale production in relation to fossil fuels. Owing to this, fossil fuels, based on petroleum, coal and natural gas, will be around for many years to come. Thus, it is necessary to utilize the inevitable CO2 released by the combustion processes in a rational and economical way. Chemical transformation processes of CO2 into methanol, hydrocarbons and organic carbonates are attractive and relatively easy to implement in the short-to-medium terms. However, the low reactivity of CO2 and the thermodynamic limitations in terms of conversion and yield of products remain challenges to be overcome in the development of sustainable CO2 conversion processes.

Evaluation of a carbon paste electrode modified with organofunctionalised SBA-15 silica in the determination of copper

The performance of a carbon paste electrode (CPE) modified with SBA-15 nanostructured silica organofunctionalised with 2-benzothiazolethiol for determination of Cu(II) ions in sugar cane spirit (cachaça) is described, based on differential pulse anodic stripping voltammetry (DPASV) procedure. The Cu(II) oxidation peak was observed at 0.03 V (vs. SCE) in phosphate solution (pH 3.0). The results were obtained using optimised conditions such as 100 mV pulse amplitude, 3 min accumulation time, 25 mV s-1 scan rate in phosphate solution pH 3.0, resulting in a linear dynamic range from 8.0 x 10-7 to 1.0 x 10-5 mol L-1 Cu(II) and a limit of detection 2.0 x10-7 mol L-1. Cu(II) spiked in a cachaça sample was determined with 102.5 % mean recovery at mmol L-1 level. Interference from other metallic cations present in the sample was avoided by the standard addition procedure.

S-metolachlor efficacy on the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in mechanically green harvested sugarcane

The aim of this study was to assess the efficacy of S-metolachlor applied in pre-emergence conditions for the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in sugar cane mechanically harvested without previous burning of the crop (green harvest) with the crop residue either left or not on the soil surface. The experiments were established in the field according to a randomized complete block design with four repetitions in a 7 x 2 split-plot scheme. In the plots, five herbicide treatments were studied (S-metolachlor at 1.44, 1.92, and 2.40 kg ha-1, clomazone at 1.20 kg ha-1, and isoxaflutole at 0.188 kg ha-1), and two control treatments with no herbicide application. In the subplots, the presence or absence of sugar cane crop residue on the soil surface was evaluated. S-metolachlor efficacy was not hampered by either 14 or 20 t ha-1 of sugar cane crop residue on the soil surface. When sugar cane crop residue was covering the soil surface, S-metolachlor at a rate of 1.44 kg ha-1 resulted in weed control similar at their larger rates, where as without the presence of crop residue, S-metolachlor controlled B. decumbens, D. horizontalis, and P. maximum at the rates of 1.92, 1.44, and 1.92 kg ha-1, respectively. The herbicides clomazone and isoxaflutole were effective for the studied species, independently of the crop residue covering the soil surface. S-metolachlor caused no visible injury symptoms to the sugar cane plant. Clomazone and isoxaflutole caused visible injuries to the sugar cane plant. None of the herbicides negatively affected the number of viable culms m² or the culm height and diameter.

Production of a bioherbicide agent in liquid and solid medium and in a biphasic cultivation system

The use of fungi in weeds control programs depends upon the conidia production in large scale. Therefore, this study aimed to evaluate liquid and solid culture media and the cultivation by biphasic system for the conidia production of Bipolaris euphorbiae Muchovej & Carvalho a specific pathogen of Euphorbia heterophylla. The liquid media were obtained from agro-industrial waste or by-products, and the solid media were prepared with mixtures of grains and grain derivatives. The liquid medium made with sugar cane molasses stood out from the others because it provided great sporulation (23 x 10(4) conidia mL-1 of medium), conidial viability (99.7%), and formation of mycelial fungal biomass (1.26 g 100 mL-1 of medium). On solid media conidial production was markedly higher than in liquid media, especially the medium composed by a blend of sorghum grain (40%) and soybean hulls (60%) where the fungus produced 2.3 x 10(7) conidia g-1 of medium. The cultivation of B. euphorbiae in biphasic system not promoted a significant increase in the production of conidia. The solid media were more effective for the mass production of fungus and mixtures of grains and derivatives were effective for increasing conidia production.

INFLUENCE OF SUGARCANE STRAW AND SOWING DEPTH ON THE EMERGENCE OF WEED SPECIES

ABSTRACT This study aimed to understand the influence of sowing depth and the amount of sugarcane straw on the emergence of weed species Luffa aegyptiaca Miller (Cucurbitaceae); Mucuna aterrima Piper & Tracy (Fabaceae - Leguminosae) and Ricinus communis (Euphorbiaceae). A completely randomized design with a 5 x 4 x 3 factorial layout with four replications was used, at five sowing depths (0, 2, 4, 8 and 10 cm), four different amounts of sugarcane straw (0, 5, 10 and 15 t ha-1) and three different evaluation periods (7, 14 and 21 days after sowing). After sowing, different amounts of sugarcane straw (0, 5, 10 and 15 t ha-1) were deposited on soil. Seedling emergence was analyzed at 7, 14 and 21 days after sowing, counting the number of seedlings that had emerged. At the end of the trial, weed height (cm), leaf area (cm2) and shoot dry mass (g) were measured. In relation to emergence ability, studied species presented different responses according to sowing depth and to the amount of sugarcane straw deposited on the soil. For the L.aegyptiacaand M.aterrima, no significant difference was observed in the interaction between depth and sugarcane straw, showing the adaptation of these species to no-burn sugarcane system. For R.communis, seeds placed at 0 cm of sugar cane straw depth were observed to favor the emergence of seedlings.

The genera Eriochrysis P. Beauv., Imperata Cirillo and Saccharum L. (Poaceae - Andropogoneae - Saccharinae) in the state of Rio Grande do Sul, Brazil

The subtribe Saccharinae belongs to the tribe Andropogoneae and comprises ca. 140 species in 13 genera, including Eriochrysis, Imperata and Saccharum. This work presents a survey of the species of these three genera in the state of Rio Grande do Sul. Intensive field collections were made in different physiographic regions of the state, as well as studies in several herbaria. The occurrence of three native species of each genus was confirmed in Rio Grande do Sul, in addition to sugar cane (Saccharum officinarum) that is cultivated in the region. Based on the material examined, Eriochrysis villosa is reported for the first time in the state of Paraná, Brazil. Identification keys for the species, descriptions, data on their geographical distributions, habitats and flowering and fruiting periods, as well as illustrations of important taxonomic characters are provided.

Effect of policosanol on cerebral ischemia in Mongolian gerbils

Policosanol is a mixture of higher aliphatic primary alcohols isolated from sugar cane wax, whose main component is octacosanol. An inhibitory effect of policosanol on platelet aggregation and cerebral ischemia in animal models has been reported. Thus, the objective of the present study was to evaluate the effect of policosanol on cerebral ischemia induced by unilateral carotid ligation and bilateral clamping and recirculation in Mongolian gerbils. Policosanol (200 mg/kg) administered immediately after unilateral carotid ligation and at 12- or 24-h intervals for 48 h significantly inhibited mortality and clinical symptoms when compared with controls, whereas lower doses (100 mg/kg) were not effective. Control animals showed swelling (tissue vacuolization) and necrosis of neurons in all areas of the brain studied (frontal cortex, hippocampus, striatum and olfactory tubercle), showing a similar injury profile. In the group treated with 200 mg/kg policosanol swelling and necrosis were significantly reduced when compared with the control group. In another experimental model, comparison between groups showed that the brain water content of control gerbils (N = 15) was significantly higher after 15 min of clamping and 4 h of recirculation than in sham-operated animals (N = 13), whereas policosanol (200 mg/kg) (N = 19) significantly reduced the edema compared with the control group, with a cerebral water content identical to that of the sham-operated animals. cAMP levels in the brain of control-ligated Mongolian gerbils (N = 8) were significantly lower than those of sham-operated animals (N = 10). The policosanol-treated group (N = 10) showed significantly higher cAMP levels (2.68 pmol/g of tissue) than the positive control (1.91 pmol/g of tissue) and similar to those of non-ligated gerbils (2.97 pmol/g of tissue). In conclusion, our results show an anti-ischemic effect of policosanol administered after induction of cerebral ischemia, in two different experimental models in Mongolian gerbils, suggesting a possible therapeutic effect in cerebral vascular disorders.

Protective effect of policosanol on atherosclerotic lesions in rabbits with exogenous hypercholesterolemia

Policosanol is a mixture of higher aliphatic alcohols purified from sugar cane wax, with cholesterol-lowering effects demonstrable in experimental models and in patients with type II hypercholesterolemia. The protective effects of policosanol on atherosclerotic lesions experimentally induced by lipofundin in rabbits and rats and spontaneously developed in stumptail monkeys have been described. The present study was conducted to determine whether policosanol administered orally to rabbits with exogenous hypercholesterolemia also protects against the development of atherosclerotic lesions. Male New Zealand rabbits weighing 1.5 to 2 kg were randomly divided into three experimental groups which received 25 or 200 mg/kg policosanol (N = 7) orally for 60 days with acacia gum as vehicle or acacia gum alone (control group, N = 9). All animals received a cholesterol-rich diet (0.5%) during the entire period. Control animals developed marked hypercholesterolemia, macroscopic lesions and arterial intimal thickening. Intima thickness was significantly less (32.5 ± 7 and 25.4 ± 4 µm) in hypercholesterolemic rabbits treated with policosanol than in controls (57.6 ± 9 µm). In most policosanol-treated animals, atherosclerotic lesions were not present, and in others, thickness of fatty streaks had less foam cell layers than in controls. We conclude that policosanol has a protective effect on the atherosclerotic lesions occurring in this experimental model.

Influence of carbon source and the fermentation process on levan production by Zymomonas mobilis analyzed by the surface response method

The aim of this study is to assess sugar cane juice and sucrose as substrates, the batch and fed batch processes and their interaction in the levan production using a complete factorial design. Zymomonas mobilis was cultivated in different sugar cane juice and sucrose concentrations in two fermentation processes at 25 °C for 20 h. A complete factorial design (2³) was used to analyze the effects of the type and concentration of the substrate, as well as the batch and fed batch processes. A complete second factorial design (2²) was used to observe the importance of sugar cane juice. The results indicated that the batch process improved the levan production reaching 40.14 g/L. The addition of sugar cane juice was not statistically significant for levan formation, however sugar cane juice stimulated biomass, sorbitol and ethanol production. The best medium for levan production was 150 g/L sucrose in batch.

Effects of nickel on the mineral composition of Fleischmann’s yeast (Saccharomyces cerevisiae)

Sugar cane juice containing 12% (w.w -1) of total reducing sugars and 0.0 to 5.0 mmol of nickel L-1, with pH ranging from 3.5 to 6.5, was inoculated with Fleischmann’s yeast (Saccharomyces cerevisiae) (10% w.w -1). Six hours after fermentation, the yeast’s cellular viability and trehalose content were evaluated. The resulting must was centrifuged and the raw yeast was analyzed by atomic absorption spectroscopy to evaluate the intracellular levels of calcium, copper, iron, magnesium, manganese, nickel, phosphorus, potassium, sulfur and zinc. The intracellular levels of iron, magnesium and calcium were affected and the yeast’s susceptibility to nickel was enhanced by the decrease in pH. The yeast’s growth was not affected by nickel at high pH, but the toxic effects of nickel were potentiated at low pH.

Some functional characteristics of extruded blends of fiber from sugarcane bagasse, whey protein concentrate, and corn starch

Blends of fiber from sugar cane bagasse, corn starch, and whey protein concentrate were extruded. A single screw extruder, equipped with a screw at a constant compression ratio of 1:1 and a die diameter of 3 mm, was used. The best processing conditions were determined according to a central composite rotatable design (α = 1.41) with 5 central points, which gives a total of 13 tests. During the extrusion process the content of insoluble fiber decreased and that of soluble fiber increased. An increase in the contents of fiber and in the barrel temperature resulted in a decrease in the expansion index values and an increase in the water absorption index values; whereas in blends with intermediate fiber contents the effects in these parameters were found to be the opposite. High fiber contents increased penetration force but decreased luminosity, water solubility index values and the adhesive force in gels. The extrusion process improved the functional properties of sugarcane fiber bagasse enabling its addition to diverse alimentary systems.

Immigration et alimentation à Montréal aux XVIIe et XVIIIe siècles : essai d’interprétation à partir d’analyses isotopiques sur des populations archéologiques

Afin d’étudier l’influence de la migration sur l’alimentation à Montréal aux XVIIe et XVIIIe siècles, 64 individus de la collection du cimetière Notre-Dame, daté de 1691 à 1796, ont fait l’objet d’analyses ostéologiques et isotopiques. Les analyses isotopiques ont portées sur le carbone (d13C) et l’azote (d15N) du collagène des os, ainsi que sur le d13C et l’oxygène (d18O) du carbonate de l’apatite des os et des dents (prémolaires et troisièmes molaires). Le d18O des dents a permis de définir approximativement trois régions d’origine (région de Montréal, région enrichie en 18O (i.e. Acadie, Louisiane, Nouvelle-Angleterre, France, Antilles et Afrique) et région appauvrie en 18O (intérieur des terres et plus au nord) pour 58 individus, et sept possibles parcours migratoire (N=27). Plus de la moitié de l’échantillon est composé d’individus possiblement natifs de Montréal (55 %). De plus, les résultats indiquent que les gens étaient peu mobiles avant l’âge de 16 ans. Toutefois, 12 individus ont entrepris des déplacements entre 7 et 16 ans, majoritairement d’un environnement enrichi vers Montréal (N=5) ou de Montréal vers une région appauvrie (N=5). L’âge de recrutement des mousses sur les navires, la traite de la fourrure, la coupe du bois et possiblement aussi l’esclavage pourraient expliquer cette « jeune » migration. Sur le plan alimentaire, les végétaux de type C3, la viande nourrie aux ressources C3 et le poisson faisaient partie du menu montréalais. Les plantes C4 (majoritairement maïs mais aussi sucre de canne [rhum]) étaient consommées en quantité variable. La question de l’influence de la migration sur l’alimentation n’a pu être explorée en profondeur en raison de contraintes liées à la contamination du d18O du carbonate des os. La combinaison des données ostéologiques et isotopiques à la distribution spatiale des sépultures, a permis d’étudier un aspect de l’archéologie funéraire à l’échelle individuelle (identité possible), sans toutefois fournir de résultats probants, à l’échelle du cimetière et de son organisation globale.