Juvenile dynamics of the endemic and rare Enterolobium glaziovii Benth. (Mimosaceae) around reproductive trees in the Atlantic forest, Brazil

Studies on the regeneration and seedling mortality of rare tree species are important, but scarce. The aim of this study was to investigate the annual variation in recruitment, growth and mortality of juveniles of Enterolobium glaziovii Benth., a rare tree species from the Brazilian Atlantic Rain Forest. All seedlings and juveniles around four reproductive trees were labeled and their fate was followed from 1996 to 1999. There were no annual differences in juveniles' recruitment below and beyond the parental crown, but juveniles' survival and growth were lower below than beyond of the parental tree crowns. Small individuals (< 15 cm tall) showed the greatest mortality and the lowest growth, followed by medium (from 15 to 50 cm tall) and large ones (> 50 cm tall). Large juveniles were more widely dispersed from the conspecific parental tree than were medium and small ones. This suggests that distance dependent mortality of juveniles mediated by the parental tree is an important cause of spacing shifts associated with the growth of small individuals of E. glaziovii into large ones. Widely dispersed juveniles may escape the high mortality associated with pathogens, herbivores or seed predators concentrated around adult conspecifics. The negative influence of the parental tree on its juveniles may explain the sparse distribution of its adults in the forest.

Spatial variation in the structure and floristic composition of "restinga" vegetation in southeastern Brazil

We examined large-scale spatial variation of structural parameters and floristic composition in open Clusia scrub, a vegetation type of the Brazilian "restingas" (sandy coastal plain vegetation). This vegetation is organized in islands separated by sandy stretches with sparse herbaceous vegetation. We located 12 sample areas on three consecutive beach ridges, lying parallel to the coastline and at different distances from the ocean, in close proximity to two lagoons (Cabiúnas and Comprida). Each sample area was divided into three strips. We used the line intercept method to sample all woody plants ³ 50 cm tall. We used nested ANOVA to verify structural variation between different sampling scales. TWINSPAN analysis was performed to examine the variation in floristic composition between areas. The overall diversity index was 3.07. Six species are repeatedly dominant throughout the entire sampling area. There was homogeneity in relation to diversity and species richness between beach ridges but not within beach ridges. Floristic composition and structural parameters did not vary in relation to distance from the sea but floristic composition did vary as a function of proximity to Cabiúnas or Comprida lagoon. Differences in plant cover between sample areas may be related to the paleoformation of this sandy coastal plain.

Structural analysis of the vegetation on a highland granitic rock outcrop in Southeast Brazil

Granitic rock outcrops of the Brazilian southeast are either coastal or inland. The latter can often have high altitudes, such as in the summits of "Serra do Mar" and "Serra da Mantiqueira", where they are known as "Campos de Altitude". The landscape on these high altitude plateaux is often a mosaic of shrubs and treelets within a bunchgrass matrix, with sparse pteridophytes and other herbs, interspersed with variable extensions of rock outcrops. Despite the pervasiveness of rock outcrops in the Brazilian landscape, studies on the structural analysis of the vegetation on such formations are scarce. This study aimed to analyze the structure of the vegetation on a highland granitic rock outcrop in "Parque Estadual da Serra do Brigadeiro", state of Minas Gerais, Southeast Brazil (42°20' - 42°40' S and 20°20' - 21°00' W, 1,722 m of elevation ). Quantitative parameters of absolute and relative frequency and dominance (cover) were estimated. The group analysis used the Jaccard similarity index. Trilepis lhotzkiana, Panicum sp. 1, and Vellozia variegata presented the highest relative frequencies, relative dominances and importance values. These three species, along with Dyckia bracteata, Rhynchospora emaciate, and Tibouchina cf. manicata, represented 98.3% of the relative dominance. The remaining 1.7% referred to 22 remaining species. The distinction among quadrats within formed groups by cluster analysis was due to the great number of low frequency species.

Clonal growth and dispersal potential of Leiothrix flagellaris Ruhland (Eriocaulaceae) in the rocky grasslands of Southeastern Brazil

Leiothrix flagellaris is a small clonal plant that grows in sandy/rocky, nutrient poor soils in the rocky grasslands ("campos rupestres") of southeastern Brazil. In the rainy season most of their flower heads differentiate into small rosettes, produced by pseudovivipary, and connected to the mother-plant by flexible, elongated stalks that can reach up to 90cm. Most of these rosettes remain suspended over rocks or over the sparse herbaceous surrounding vegetation, while a few arch low enough to come into contact with the surrounding soil and take root. These suspended rosettes can reach diameters comparable to currently rooted and reproductively active rosettes produced during previous reproductive periods. As the rooted rosettes grow up, their potential to generate and disperse new pseudoviviparous rosettes increase rapidly. This unusual guerrilla strategy of L. flagellaris seems to congregate a suit of traits that promote a fast increase in photosynthetic area and improve recruitment, thereby helping to circumvent dispersal and establishment failures in its severe environment.

Experimental chronic entrapment of the sciatic nerve in adult hamsters: an ultrastructural and morphometric study

Entrapment neuropathy is a group of clinical disorders involving compression of a peripheral nerve and interference with nerve function mostly through traction injury. We have investigated the chronic compression of peripheral nerves as an experimental procedure for detecting changes in ultrastructural nerve morphology. Adult hamsters (Mesocricetus auratus, N = 30) were anesthetized with a 25% pentobarbital solution and received a cuff around the right sciatic nerve. Left sciatic nerves were not operated (control group). Animals survived for varying times (up to 15 weeks), after which they were sacrificed and both sciatic nerves were immediately fixed with a paraformaldehyde solution. Experimental nerves were divided into segments based upon their distance from the site of compression (proximal, entrapment and distal). Semithin and ultrathin sections were obtained and examined by light and electron microscopy. Ultrastructural changes were qualitatively described and data from semithin sections were morphometrically analyzed both in control and in compressed nerves. We observed endoneurial edema along with both perineurial and endoneurial thickening and also the existence of whorled cell-sparse structures (Renaut bodies) in the subperineurial space of compressed sciatic nerves. Morphometric analyses of myelinated axons at the compression sites displayed a remarkable increase in the number of small axons (up to 60%) in comparison with the control axonal number. The distal segment of compressed nerves presented a distinct decrease in axon number (up to 40%) comparatively to the control group. The present experimental model of nerve entrapment in adult hamsters was shown to promote consistent histopathologic alterations analogous to those found in chronic compressive neuropathies.

Remote sensing for three-dimensional modelling of hydromorphology

Successful management of rivers requires an understanding of the fluvial processes that govern them. This, in turn cannot be achieved without a means of quantifying their geomorphology and hydrology and the spatio-temporal interactions between them, that is, their hydromorphology. For a long time, it has been laborious and time-consuming to measure river topography, especially in the submerged part of the channel. The measurement of the flow field has been challenging as well, and hence, such measurements have long been sparse in natural environments. Technological advancements in the field of remote sensing in the recent years have opened up new possibilities for capturing synoptic information on river environments. This thesis presents new developments in fluvial remote sensing of both topography and water flow. A set of close-range remote sensing methods is employed to eventually construct a high-resolution unified empirical hydromorphological model, that is, river channel and floodplain topography and three-dimensional areal flow field. Empirical as well as hydraulic theory-based optical remote sensing methods are tested and evaluated using normal colour aerial photographs and sonar calibration and reference measurements on a rocky-bed sub-Arctic river. The empirical optical bathymetry model is developed further by the introduction of a deep-water radiance parameter estimation algorithm that extends the field of application of the model to shallow streams. The effect of this parameter on the model is also assessed in a study of a sandy-bed sub-Arctic river using close-range high-resolution aerial photography, presenting one of the first examples of fluvial bathymetry modelling from unmanned aerial vehicles (UAV). Further close-range remote sensing methods are added to complete the topography integrating the river bed with the floodplain to create a seamless high-resolution topography. Boat- cart- and backpack-based mobile laser scanning (MLS) are used to measure the topography of the dry part of the channel at a high resolution and accuracy. Multitemporal MLS is evaluated along with UAV-based photogrammetry against terrestrial laser scanning reference data and merged with UAV-based bathymetry to create a two-year series of seamless digital terrain models. These allow the evaluation of the methodology for conducting high-resolution change analysis of the entire channel. The remote sensing based model of hydromorphology is completed by a new methodology for mapping the flow field in 3D. An acoustic Doppler current profiler (ADCP) is deployed on a remote-controlled boat with a survey-grade global navigation satellite system (GNSS) receiver, allowing the positioning of the areally sampled 3D flow vectors in 3D space as a point cloud and its interpolation into a 3D matrix allows a quantitative volumetric flow analysis. Multitemporal areal 3D flow field data show the evolution of the flow field during a snow-melt flood event. The combination of the underwater and dry topography with the flow field yields a compete model of river hydromorphology at the reach scale.

Immunohistochemical characterization of the chick marginal retina

The retina is a highly differentiated tissue with a complex layered structure that has been extensively characterized. However, most of the previous studies focused on the histology of the central retina while little is known about the cellular composition, organization and function of the marginal retina. Recent research has identified a subpopulation of multipotential progenitor cells in the marginal regions of the retina, closest to the ciliary body ("ciliary marginal zone"). These cells are capable of differentiation in response to an appropriate stimulus. Thus, it is possible that the structure and composition of the marginal retina are distinct from those of the central retina to accommodate the potential addition of newly formed neurons. To characterize the cellular profile of the chick marginal retina, we labeled it immunohistochemically for markers whose staining pattern is well established in the central retina: calbindin, calretinin, protein kinase C, and choline acetyltransferase. Calbindin was present at very low levels in the marginal retina putative photoreceptor layer. Calretinin-positive horizontal cells were also sparse close to the ciliary marginal zone. The bipolar cells in the marginal outer plexiform layer were positive for anti-protein kinase C antibodies, but the density of labeling was also decreased in relation to the central retina. In contrast, the marginal starburst cholinergic amacrine cell pattern was very similar to the central retina. From these data we conclude that the structure of the marginal retina is significantly different from that of the central retina. In particular, the expression of late retina markers in the marginal retina decreased in comparison to the central retina.

Elementtikoon vaikutus väsymismenetelmien tarkkuuteen

Kandidaatintyössä tutkittiin kolmen hitsatun palstalevyliitoksen väsymiskestävyyttä äärellisten elementtien menetelmällä. Tutkimuksen pääpaino oli 2D-mallin antamien tulosten suppenevuudessa kolmella eri elementtikoolla ja kolmessa eri mittasuhdetapauksessa. Tutkimustuloksissa havaittiin noin 5 % muutos harvimman ja tiheimmän elementtiverkon tulosten välillä. Tutkimuksessa havaittiin myös että muutos harvimman ja tiheimmän elementtiverkon tuloksissa pieneni hiukan mitä suurempia kappaleet ja niiden hitsausliitokset olivat.

Real-time simulation of multibody systems with applications for working mobile vehicles

This dissertation describes an approach for developing a real-time simulation for working mobile vehicles based on multibody modeling. The use of multibody modeling allows comprehensive description of the constrained motion of the mechanical systems involved and permits real-time solving of the equations of motion. By carefully selecting the multibody formulation method to be used, it is possible to increase the accuracy of the multibody model while at the same time solving equations of motion in real-time. In this study, a multibody procedure based on semi-recursive and augmented Lagrangian methods for real-time dynamic simulation application is studied in detail. In the semirecursive approach, a velocity transformation matrix is introduced to describe the dependent coordinates into relative (joint) coordinates, which reduces the size of the generalized coordinates. The augmented Lagrangian method is based on usage of global coordinates and, in that method, constraints are accounted using an iterative process. A multibody system can be modelled as either rigid or flexible bodies. When using flexible bodies, the system can be described using a floating frame of reference formulation. In this method, the deformation mode needed can be obtained from the finite element model. As the finite element model typically involves large number of degrees of freedom, reduced number of deformation modes can be obtained by employing model order reduction method such as Guyan reduction, Craig-Bampton method and Krylov subspace as shown in this study The constrained motion of the working mobile vehicles is actuated by the force from the hydraulic actuator. In this study, the hydraulic system is modeled using lumped fluid theory, in which the hydraulic circuit is divided into volumes. In this approach, the pressure wave propagation in the hoses and pipes is neglected. The contact modeling is divided into two stages: contact detection and contact response. Contact detection determines when and where the contact occurs, and contact response provides the force acting at the collision point. The friction between tire and ground is modelled using the LuGre friction model, which describes the frictional force between two surfaces. Typically, the equations of motion are solved in the full matrices format, where the sparsity of the matrices is not considered. Increasing the number of bodies and constraint equations leads to the system matrices becoming large and sparse in structure. To increase the computational efficiency, a technique for solution of sparse matrices is proposed in this dissertation and its implementation demonstrated. To assess the computing efficiency, augmented Lagrangian and semi-recursive methods are implemented employing a sparse matrix technique. From the numerical example, the results show that the proposed approach is applicable and produced appropriate results within the real-time period.

Environmental assessment of Lake Gibson sediments, water quality, and soils of the Niagara Region

In light of the fact that literature on toxicity of heavy metals in non-acidified freshwater systems is sparse, this project was initiated to conduct an environmental assessment of Lake Gibson. Chemistry of soils from adjacent areas and vineyards in the region provide a comparative background database. Water quality determinations were used to identify and highlight areas of environmental concern within the Lake Gibson watershed. A Shelby Corer was used to obtain 66 sediment cores from Lake Gibson. These were sectioned according to lithology and color to yield 298 samples. A suite of 122 soil samples was collected in the region and vicinity of Lake Gibson. All were tested for metals and some for Total Petroleum Hydrocarbons (TPH). Evaluation of the results leads to the following conclusions: 1. Metal concentrations ofAI, Cd, Cu, Cr, Pb, Ni, Fe and Zn in soils from the Niagara Region are well below background limits set by the Ministry of the Environment and Energy (MOEE) for provincial soils. 2. There is a spatial and depth difference for some of the metals within the various soils. The Cr, Ni and Pb contents of soils vary throughout the region (p

Investigating the potential of thecamoebians (testate amoebae) as bio-indicators of impact of oil sands mining operations on freshwater environments in Northeastern Alberta, Canada

Thecamoebian (testate amoeba) species diversity and assemblages in reclamation wetlands and lakes in northeastern Alberta respond to chemical and physical parameters associated with oil sands extraction. Ecosystems more impacted by OSPM (oil sands process-affected material) contain sparse, low-diversity populations dominated by centropyxid taxa and Arcella vulgaris. More abundant and diverse thecamoebian populations rich in difflugiid species characterize environments with lower OSPM concentrations. These shelled protists respond quickly to environmental change, allowing year-to-year variations in OSPM impact to be recorded. Their fossil record thus provides corporations with interests in the Athabasca Oil Sands with a potential means of measuring the progression of highlyimpacted aquatic environments to more natural wetlands. Development of this metric required investigation of controls on their fossil assemblage (e.g. seasonal variability, fossilization potential) and their biogeographic distribution, not only in the constructed lakes and wetlands on the oil sands leases, but also in natural environments across Alberta.

The Political Economy of St. Catharines' Illicit Taxi Trade

The global restructuring of production has led to increasingly precarious working conditions around the world. Post-industrial work is characterized by poor working conditions, low wages, a lack of social protection and political representation and little job security. Unregulated forms of work that are defined as “irregular” or “illegal”, or in some cases “criminal,” are connected to sweeping transformations within the broader regulated (formal) economy. The connection between the formal and informal sectors can more accurately be described as co-optation and, as a subordinate integration of the informal to the formal. The city of St. Catharines within Niagara, along with much of Ontario’s industrial heartland, has been hard hit by deindustrialization. The rise of this illegal service is thus viewed against the backdrop of heavy economic restructuring, as opportunities for work in the manufacturing sector have become sparse. In addition, this research also explores the paradoxical co-optation of the growing illicit taxi economy and consequences for racialized and foreign credentialed labour in the taxi industry. The overall objective of this research is to explore the illicit cab industry as not only inseparable from the formal economy, but dialectically, how it is as an integrated and productive element of the public and private transportation industry. Furthermore the research examines what this co-optation means in the context of a labour market that is split by race.

Effects of credit rating change on risk-taking

This thesis investigates whether there are changes in risk-taking behavior following an upgrade or downgrade in credit ratings. Research on effects of rating changes on capital markets is well-documented but the literature on how rating changes may affect firm behavior is sparse. Following, a downgrade in credit rating, managers may increase risk-taking to improve their overall performance or reduce risk-taking following upgrades to ensure that their performance is assessed more on the basis of what they may deem success in the form of an upgrade. Using a sample of firms trading in the U.S from 1994-2013, we find evidence of change in risk-taking behavior. We use cross-sectional regressions and matching using propensity scores and Barber and Lyon (1997) methodology to measure changes in risk-taking and we do find evidence of changes in managerial risk-taking behavior. Furthermore, we find that the direction of change (increase or decrease) in some cases is dependent on the type of measure rather than the type of rating change.

Non-negative matrix decomposition approaches to frequency domain analysis of music audio signals

On étudie l’application des algorithmes de décomposition matricielles tel que la Factorisation Matricielle Non-négative (FMN), aux représentations fréquentielles de signaux audio musicaux. Ces algorithmes, dirigés par une fonction d’erreur de reconstruction, apprennent un ensemble de fonctions de base et un ensemble de coef- ficients correspondants qui approximent le signal d’entrée. On compare l’utilisation de trois fonctions d’erreur de reconstruction quand la FMN est appliquée à des gammes monophoniques et harmonisées: moindre carré, divergence Kullback-Leibler, et une mesure de divergence dépendente de la phase, introduite récemment. Des nouvelles méthodes pour interpréter les décompositions résultantes sont présentées et sont comparées aux méthodes utilisées précédemment qui nécessitent des connaissances du domaine acoustique. Finalement, on analyse la capacité de généralisation des fonctions de bases apprises par rapport à trois paramètres musicaux: l’amplitude, la durée et le type d’instrument. Pour ce faire, on introduit deux algorithmes d’étiquetage des fonctions de bases qui performent mieux que l’approche précédente dans la majorité de nos tests, la tâche d’instrument avec audio monophonique étant la seule exception importante.

Qualification et quantification de l'obligation de sécurité informationnelle dans la détermination de la faute civile

L'obligation de sécurité informationnelle - c'est-à-dire la tâche qui incombe aux entreprises d'assurer l'intégrité, la confidentialité et la disponibilité de l'information découle, tant en droit québécois que dans une majorité de juridictions occidentales, d'une série de dispositions législatives imposant non pas l'adoption de comportements ou l'utilisation de technologies ou de procédés identifiables, mais bien l'implantation de mesures de sécurité «raisonnables », «adéquates », ou « suffisantes ». Or, dans un domaine aussi embryonnaire et complexe que celui de la sécurité informationnelle, domaine dans lequel les solutions disponibles sont multiples et où la jurisprudence est éparse, comment une entreprise peut-elle jauger avec justesse l'étendue de son obligation? Bref, comment établir ce que ferait une entreprise raisonnablement prudente et diligente dans un domaine où il n'existe actuellement aucune balise législative, jurisprudentielle ou même coutumière permettant de fixer avec justesse le niveau de diligence imposé par le législateur? L'absence de sécurité juridique offerte par une telle situation est patente et nécessite une reconfiguration du cadre opératoire de l'obligation de sécurité informationnelle afin d'en identifier les composantes et les objectifs. Cet exercice passera par la redéfinition de l'obligation de sécurité informationnelle comme obligation de réduire les risques qui guettent l'information à un niveau socialement acceptable. En effet, la sécurité pouvant être définie comme étant la gestion du risque, c'est donc le risque qui réside au cœur de cette obligation. Or, en analysant les risques qui guettent un système, soit en analysant les menaces qui visent à exploiter ses vulnérabilités, il est possible d'établir quelles contre-mesures s'avèrent utiles et les coûts associés à leur mise en œuvre. Par la suite, il devient envisageable, en recourant à la définition économique de la négligence et en prenant compte des probabilités de brèches de sécurité et des dommages escomptés, d'établir les sommes optimales à investir dans l'achat, l'entretien et la mise à jour de ces contre-mesures. Une telle analyse permet ainsi de quantifier avec un certain degré de précision l'étendue de l'obligation de sécurité informationnelle en offrant aux entreprises un outil s'inspirant de données matérielles auxquelles elles ont librement accès et s'intégrant aisément dans le contexte juridique contemporain.