Active sites on hydrogen evolution photocatalyst

Solar hydrogen production assisted with semiconductor materials is a promising way to provide alternative energy sources in the future. Such a photocatalytic reaction normally takes place on the active sites of the catalysts surface, and the identification of the active sites is crucial for understanding the photocatalytic reaction mechanism and further improving the photocatalytic efficiency. However, the active sites of model catalysts are still largely disputed because of their structural complexity. Conventionally, H-2 evolution from solar water splitting over Pt/TiO2 is widely deemed to take place on metallic Pt nanoparticles. Oppositely, we report through a combined experimental and theoretical approach, that metallic Pt nanoparticles have little contribution to the activity of photocatalytic H-2 evolution; the oxidized Pt species embedded on the TiO2 surface are the key active sites and primarily responsible for the activity of the hydrogen evolution Pt/TiO2 photocatalyst.

Radiative hydrodynamic modelling and observations of the X-class solar flare on 2011 March 9

Aims. We investigated the response of the solar atmosphere to non-thermal electron beam heating using the radiative transfer and hydrodynamics modelling code RADYN. The temporal evolution of the parameters that describe the non-thermal electron energy distribution were derived from hard X-ray observations of a particular flare, and we compared the modelled and observed parameters.

Methods. The evolution of the non-thermal electron beam parameters during the X1.5 solar flare on 2011 March 9 were obtained from analysis of RHESSI X-ray spectra. The RADYN flare model was allowed to evolve for 110 s, after which the electron beam heating was ended, and was then allowed to continue evolving for a further 300 s. The modelled flare parameters were compared to the observed parameters determined from extreme-ultraviolet spectroscopy.

Results. The model produced a hotter and denser flare loop than that observed and also cooled more rapidly, suggesting that additional energy input in the decay phase of the flare is required. In the explosive evaporation phase a region of high-density cool material propagated upward through the corona. This material underwent a rapid increase in temperature as it was unable to radiate away all of the energy deposited across it by the non-thermal electron beam and via thermal conduction. A narrow and high-density (ne ≤ 1015 cm-3) region at the base of the flare transition region was the source of optical line emission in the model atmosphere. The collision-stopping depth of electrons was calculated throughout the evolution of the flare, and it was found that the compression of the lower atmosphere may permit electrons to penetrate farther into a flaring atmosphere compared to a quiet Sun atmosphere.

Active site labeling of cysteine cathepsins by a straightforward diazomethylketone probe derived from the N-terminus of human cystatin C

We designed a straightforward biotinylated probe using the N-terminal substrate-like region of the inhibitory site of human cystatin C as a scaffold, linked to the thiol-specific reagent diazomethylketone group as a covalent warhead (i.e. Biot-(PEG)2-Ahx-LeuValGly-DMK). The irreversible activity-based probe bound readily to cysteine cathepsins B, L, S and K. Moreover affinity labeling is sensitive since active cathepsins were detected in the nM range using an ExtrAvidin®-peroxidase conjugate for disclosure. Biot-(PEG)2-Ahx-LeuValGly-DMK allowed a slightly more pronounced labeling for cathepsin S with a compelling second-order rate constant for association (kass = 2,320,000 M−1 s−1). Labeling of the active site is dose-dependent as observed using 6-cyclohexylamine-4-piperazinyl-1,3,5-triazine-2-carbonitrile, as competitive inhibitor of cathepsins. Finally we showed that Biot-(PEG)2-Ahx-LeuValGly-DMK may be a simple and convenient tool to label secreted and intracellular active cathepsins using a myelomonocytic cell line (THP-1 cells) as model.

Exposure to children and risk of active trachoma in Tanzanian women

The authors surveyed the trachoma status of 515 women aged 18-60 years and 527 children aged 1-7 years in the trachoma hyperendemic region of Kongwa, Tanzania, in 1989 to further describe the importance of exposure to young children as a risk factor for active trachoma in women. The women were identified as caretakers, who currently cared for children aged 1-7 years; noncaretakers, who lived with, but did not care for, children aged 1-7; or those without children aged 1-7 in the household. The age-adjusted odds ratios for active trachoma seemed to rise with greater exposure to young children, from 1.00 for women without such children, to 1.63 for noncaretakers and 2.43 for caretakers (trend test, p = 0.08). Among those who lived in households with young children, the prevalence of active trachoma in women increased with the total number of young children cared for and with the number of infected children cared for. The prevalence of active trachoma was 40% (6 of 15) for caretakers of three or more infected children, compared with 0 (0 of 88) for caretakers with no infected children (p < 0.0001). Caring for infected children also appeared to be associated with signs of chronic trachoma in caretakers. Noncaretakers who lived with infected children were not at a significantly increased risk for trachoma compared with noncaretakers who were not exposed to such children (5.4% (three of 56) vs. 5.6% (one of 18); p > 0.4). None of the facial signs observed in the children (flies on the face, nasal discharge, etc.) appeared to increase the odds ratio of active trachoma in caretakers beyond the increase associated with trachoma alone in the child. These data support the hypothesis that active disease in women is associated with direct caretaking of young children with active disease. Strategies that interrupt household transmission may affect the binding sequelae of trachoma in women.

Quiet-Sun Hα Transients and Corresponding Small-scale Transition Region and Coronal Heating

Rapid blue- and redshifted excursions (RBEs and RREs) are likely to be the on-disk counterparts of Type II spicules. Recently, heating signatures from RBEs/RREs have been detected in IRIS slit-jaw images dominated by transition region (TR) lines around network patches. Additionally, signatures of Type II spicules have been observed in Atmospheric Imaging Assembly (AIA) diagnostics. The full-disk, ever-present nature of the AIA diagnostics should provide us with sufficient statistics to directly determine how important RBEs and RREs are to the heating of the TR and corona. We find, with high statistical significance, that at least 11% of the low coronal brightenings detected in a quiet-Sun region in He ii 304 Å can be attributed to either RBEs or RREs as observed in Hα, and a 6% match of Fe IX 171 Å detected events to RBEs or RREs with very similar statistics for both types of Hα features. We took a statistical approach that allows for noisy detections in the coronal channels and provides us with a lower, but statistical significant, bound. Further, we consider matches based on overlapping features in both time and space, and find strong visual indications of further correspondence between coronal events and co-evolving but non-overlapping, RBEs and RREs.

Phytochemical studies and biological activity of carnivorous plants from the Mediterranean region

Tese de doutoramento, Ciências Biotecnológicas (Biotecnologia Vegetal), Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2010

Effects of sulphurization time on Cu2ZnSnS4 absorbers and thin films solar cells obtained from metallic precursors

We report the results of a study of the sulphurization time effects on Cu2ZnSnS4 absorbers and thin film solar cells prepared from dc-sputtered tackedmetallic precursors. Three different time intervals, 10 min, 30min and 60 min, at maximum sulphurization temperature were considered. The effects of this parameter' change were studied both on the absorber layer properties and on the final solar cell performance. The composition, structure, morphology and thicknesses of the CZTS layers were analyzed. The electrical characterization of the absorber layer was carried out by measuring the transversal electrical resistance of the samples as a function of temperature. This study shows an increase of the conductivity activation energy from 10 meV to 54meV for increasing sulphurization time from 10min to 60min. The solar cells were built with the following structure: SLG/Mo/CZTS/CdS/i-ZnO/ZnO:Al/Ni:Al grid. Several ac response equivalent circuit models were tested to fit impedance measurements. The best results were used to extract the device series and shunt resistances and capacitances. Absorber layer's electronic properties were also determined using the Mott–Schottky method. The results show a decrease of the average acceptor doping density and built-in voltage, from 2.0 1017 cm−3 to 6.5 1015 cm−3 and from 0.71 V to 0.51 V, respectively, with increasing sulphurization time. These results also show an increase of the depletion region width from approximately 90 nm–250 nm.

Light harvesting in solar cells using natural pigments from red fruits adsorbed to mesoporous TiO2

Nature has developed strategies to present us with a wide variety of colours, from the green of leaves to the bright colours seen in flowers. Anthocyanins are between these natural pigments that are responsible for the great diversity of colours seen in flowers and fruits. Anthocyanins have been used to sensitize titanium dioxide (TiO2) in Dye-Sensitized Solar Cells (DSSCs). DSSCs have become one of the most popular research topic in photovoltaic cells due to their low production costs when compared to other alternatives. DSSCs are inspired in what happens in nature during photosynthesis. A primary charge separation is achieved by means of a photoexcited dye capable of performing the electron injection into the conduction band of a wide band-gap semiconductor, usually TiO2. With this work we aimed to synthesize a novel mesoporous TiO2 structure as the semiconductor in order to increase the dye loading. We used natural occurring dyes such as anthocyanins and their synthetic flavylium relatives, as an alternative to the widely used metal complexes of Ru(II) which are expensive and are environmentally unsafe. This offers not only the chance to use safer dyes for DSSCs, but also to take profit of waste biological products, such as wine and olive oil production residues that are heavily loaded with anthocyanin dyes. We also performed a photodegradation study using TiO2 as the catalyst to degrade dye contaminants, such as those from the wine production waste, by photo-irradiation of the system in the visible region of the light spectrum. We were able to succeed in the synthesis of mesoporous TiO2 both powder and thin film, with a high capacity to load a large amount of dye. We proved the concept of photodegradation using TiO2 as catalyst. And finally, we show that wine production waste is a possible dye source to DSSCs application.

Preliminary epidemiological study of latent tuberculosis in Mexican agricultural workers in the Niagara region, Canada

It is well documented that the majority of Tuberculosis (TB) cases diagnosed in Canada are related to foreign-bom persons from TB high-burden countries. The Canadian seasonal agricultural workers program (SAWP) operating with Mexico allows migrant workers to enter the country with a temporary work permit for up to 8 months. Preiimnigration screening of these workers by both clinical examination and chest X-ray (CXR) reduces the risk of introducing cases of active pulmonary TB to Canada, but screening for latent TB (LTBI) is not routinely done. Studies carried out in industrialized nations with high immigration from TBendemic countries provide data of lifetime LTBI reactivation of around 10% but little is known about reactivation rates within TB-endemic countries where new infections (or reinfections) may be impossible to distinguish from reactivation. Migrant populations like the SAWP workers who spend considerable amounts of time in both Canada and TBendemic rural areas in Mexico are a unique population in terms of TB epidemiology. However, to our knowledge no studies have been undertaken to explore either the existence of LTBI among Mexican workers, the probability of reactivation or the workers' exposure to TB cases while back in their communities before returning the following season. Being aware of their LTBI status may help workers to exercise healthy behaviours to avoid TB reactivation and therefore continue to access the SAWP. In order to assess the prevalence of LTBI and associated risk factors among Mexican migrant workers a preliminary cross sectional study was designed to involve a convenience sample of the Niagara Region's Mexican workers in 2007. Research ethics clearance was granted by Brock University. Individual questionnaires were administered to collect socio-demographic and TB-related epidemiological data as well as TB knowledge and awareness levels. Cellular immunity to M tuberculosis was assessed by both an Interferon-y release assay (lGRA), QuantiFERON -TB Gold In-Tube (QFf™) and by the tuberculin skin test (TSn using Mantoux. A total of 82 Mexican workers (out of 125 invited) completed the study. Most participants were male (80%) and their age ranged from 22 to 65 years (mean 38.5). The prevalence of LTBI was 34% using TST and 18% using QFTTM. As previously reported, TST (using ~lOmm cut-off) showed a sensitivity of 93.3% and a specificity of 79.1 %. These findings at the moment cannot predict the probability of progression to active TB; only longitudinal cohort studies of this population can ascertain this outcome. However, based on recent publications, lORA positive individuals may have up to 14% probability of reactivation within the next two years. Although according to the SA WP guidelines, all workers undergo TB screening before entering or re-entering Canada, CXR examination requirements showed to be inconsistent for this population: whereas 100% of the workers coming to Canada for the first time reported having the procedure done, only 31 % of returning participants reported having had a CXR in the past year. None of the participants reported ever having a CXR compatible with TB which was consistent with the fact that none had ever been diagnosed with active pulmonary TB and with only 3.6% reporting close contact with a person with active TB in their lifetime. Although Mexico reports that 99% of popUlation is fully immunized against TB within the first year of age, only 85.3% of participants reported receiving BOC vaccine in childhood. Conversely, even when TST is not part of the routine TB screening in endemic countries, a suqDrisingly high 25.6% reported receiving a TST in the past. In regards to TB knowledge and awareness, 74% of the studied population had previous knowledge about (active) TB, 42% correctly identified active TB symptomatology, 4.8% identified the correct route of transmission, 4.8% knew about the existence of LTBI, 3.6% knew that latent TB could reactivate and 48% recognized TB as treatable and curable. Of all variables explored as potential risk factors for LTBI, age was the only one which showed statistical significance. Significant associations could not be proven for other known variables (such as sex, TB contact, history of TB) probably because of the small sample size and the homogeneity of the sample. Screening for LTBI by TST (high sensitivity) followed by confirmation with QFT''"'^ (high specificity) suggests to be a good strategy especially for immigrants from TB high-burden countries. After educational sessions, workers positive for LTBI gained greater knowledge about the signs and symptoms of TB reactivation as well as the risk factors commonly associated with reactivation. Additionally, they were more likely to attend their annual health check up and request a CXR exam to monitor for TB reactivation.

A dimensional analysis of the benzylic hydroxylase active site in mortierella isabellina

The spatial limits of the active site in the benzylic hydroxylase enzyme of the fungus Mortierella isabellina were investigated. Several molecular probes were used in incubation experiments to determine the acceptability of each compound by this enzyme. The yields of benzylic alcohols provided information on the acceptability of the particular compound into the active site, and the enantiomeric excess values provided information on the "fit" of acceptable substrates. Measurements of the molecular models were made using Cambridge Scientific Computing Inc. CSC Chem 3D Plus modeling program. i The dimensional limits of the aromatic binding pocket of the benzylic hydroxylase were tested using suitably substituted ethyl benzenes. Both the depth (para substituted substrates) and width (ortho and meta substituted substrates) of this region were investigated, with results demonstrating absolute spatial limits in both directions in the plane of the aromatic ring of 7.3 Angstroms for the depth and 7.1 Angstroms for the width. A minimum requirement for the height of this region has also been established at 6.2 Angstroms. The region containing the active oxygen species was also investigated, using a series of alkylphenylmethanes and fused ring systems in indan, 1,2,3,4-tetrahydronaphthalene and benzocycloheptene substrates. A maximum distance of 6.9 Angstroms (including the 1.5 Angstroms from the phenyl substituent to the active center of the heme prosthetic group of the enzyme) has been established extending directly in ii front of the aromatic binding pocket. The other dimensions in this region of the benzylic hydroxylase active site will require further investigation to establish maximum allowable values. An explanation of the stereochemical distributions in the obtained products has also been put forth that correlates well with the experimental observations.

Transmission of West Nile virus in the Niagara Region among a population at risk for exposure

Background. West Nile Virus (WNV), a mosquito-borne flavivirus, is one of an increasing number of infectious diseases that have been emerging or re-emerging in the last two decades. Since the arrival ofWNV to Canada to present date, the Niagara Region has only reported 30 clinical cases, a small number compared to the hundreds reported in other regions of similar conditions. Moreover, the last reported human case in Niagara was in 2006. As it has been demonstrated that the majority of WNV infections are asymptomatic, the question remains whether the lack of clinical cases in Niagara truly reflects the lack of transmission to humans or if infections are still occurring but are mostly asymptomatic. Objectives. The general objective of this study was to establish whether or not active WNV transmission could be detected in a human population residing in Niagara for the 2007 transmission season. To fullfil this objective, a cross-sectional seroprevalence study was designed to investigate for the presence of anti-WNV antibodies in a sample of Mexican migrant agricultural workers employed in farms registered with the Seasonal Agricultural Workers Program (SAWP). Due to the Mexican origin of the study participants, three specific research objectives were proposed: a) determine the seroprevalence ofanti-WNV antibodies as well as anti-Dengue virus antibodies (a closely related virus prevalent in Mexico and likely to confound WNV serology); b) analyze risk factors associated with WNV and Dengue virus seropositivity; and c) assess the awareness of study participants about WNV infection as well as their understanding of the mode of transmission and clinical importance of the infection. Methodology: After obtaining ethics clearance from Brock University, farms were visited and workers invited to participate. Due to time constraints, only a small number of farms were enrolled with a resulting convenience and non-randomized study sample. Workers' demographic and epidemiological data were collected using a standardized questionnaire and blood samples were drawn to determine serum anti-WNV and anti- Dengue antibodies with a commercial ELISA. All positive samples were sent to the National Microbiology Laboratory in Winnipeg, Manitoba for confirmation with the Plaque Reduction Neutralization Test (PRNT). Data was analyzed with Stata 10.0. Antibody determinations were reported as seroprevalence proportions for both WNV and Dengue. Logistic regression was used to analyze risk factors that may be associated with seropositivity and awareness was reported as a proportion of the number of individuals possessing awareness over the total number of participants. Results and Discussion. In total 92 participants working in 5 farms completed the study. Using the commercial ELISA, seropositivity was as follows: 2.2% for WNV IgM, 20.7% for WNV IgG, and 17.1 % for Dengue IgG. Possible cross-reactivity was demonstrated in 15/20 (75.0%) samples that were positive for both WNV IgG and Dengue IgG. Confirmatory testing with the PRNT demonstrated that none of the WNV ELISA positive samples had antibodies to WNV but 13 samples tested positive for anti-Dengue antibodies (14.1 % Dengue sereoprevalence). The findings showed that the ELISA performance was very poor for assessing anti-WNV antibodies in individuals previously exposed to Dengue virus. However, the ELISA had better sensitivity and specificity for assessing anti-Dengue antibodies. Whereas statistical analysis could not be done for WNV seropositivity, as all samples were PRNT negative, logistic regression demonstrated several risk factors for Dengue exposure_ The first year coming to Canada appeared to be significantly associated with increased exposure to Dengue while lower socio-economic housing and the presence of a water basin in the yard in Mexico appeared to be significantly associated with a decreased exposure to Dengue_ These seemingly contradictory results illustrate that in mobile populations such as migrant workers, risk factors for exposure to Dengue are not easily identified and more research is needed. Assessing the awareness of WNV and its clinical importance showed that only 23% of participants had some knowledge of WNV, of which 76% knew that the infection was mosquito-borne and 47% recognized fever as a symptom. The identified lack of understanding and awareness was not surprising since WNV is not a visible disease in Mexico. Since WNV persists in an enzootic cycle in Niagara and the occurrence of future outbreaks is unpredictable, the agricultural workers remain at risk for transmission. Therefore it important they receive sufficient health education regarding WNV before leaving Mexico and during their stay in Canada. Conclusions. Human transmission of WNV could not be proven among the study participants even when due to their occupation they are at high risk for mosquito bites. The limitations of the study sample do not permit generalizable conclusions, however, the study findings are consistent with the absence of clinical cases in the Niagara Region, so it is likely that human transmission is indeed neglible or absent. As evidenced by our WNV serology results, PRNT must be utilized as a confirmatory test since false positivity occurs frequently. This is especially true when previous exposure to Dengue virus is likely.

A Coupled 2 × 2D Babcock–Leighton Solar Dynamo Model. I. Surface Magnetic Flux Evolution

The need for reliable predictions of the solar activity cycle motivates the development of dynamo models incorporating a representation of surface processes sufficiently detailed to allow assimilation of magnetographic data. In this series of papers we present one such dynamo model, and document its behavior and properties. This first paper focuses on one of the model's key components, namely surface magnetic flux evolution. Using a genetic algorithm, we obtain best-fit parameters of the transport model by least-squares minimization of the differences between the associated synthetic synoptic magnetogram and real magnetographic data for activity cycle 21. Our fitting procedure also returns Monte Carlo-like error estimates. We show that the range of acceptable surface meridional flow profiles is in good agreement with Doppler measurements, even though the latter are not used in the fitting process. Using a synthetic database of bipolar magnetic region (BMR) emergences reproducing the statistical properties of observed emergences, we also ascertain the sensitivity of global cycle properties, such as the strength of the dipole moment and timing of polarity reversal, to distinct realizations of BMR emergence, and on this basis argue that this stochasticity represents a primary source of uncertainty for predicting solar cycle characteristics.

Design, Fabrication and Characterization of Passive and Active Polymer Photonic Devices

The rapid developments in fields such as fibre optic communication engineering and integrated optical electronics have expanded the interest and have increased the expectations about guided wave optics, in which optical waveguides and optical fibres play a central role. The technology of guided wave photonics now plays a role in generating information (guided-wave sensors) and processing information (spectral analysis, analog-to-digital conversion and other optical communication schemes) in addition to its original application of transmitting information (fibre optic communication). Passive and active polymer devices have generated much research interest recently because of the versatility of the fabrication techniques and the potential applications in two important areas – short distant communication network and special functionality optical devices such as amplifiers, switches and sensors. Polymer optical waveguides and fibres are often designed to have large cores with 10-1000 micrometer diameter to facilitate easy connection and splicing. Large diameter polymer optical fibres being less fragile and vastly easier to work with than glass fibres, are attractive in sensing applications. Sensors using commercial plastic optical fibres are based on ideas already used in silica glass sensors, but exploiting the flexible and cost effective nature of the plastic optical fibre for harsh environments and throw-away sensors. In the field of Photonics, considerable attention is centering on the use of polymer waveguides and fibres, as they have a great potential to create all-optical devices. By attaching organic dyes to the polymer system we can incorporate a variety of optical functions. Organic dye doped polymer waveguides and fibres are potential candidates for solid state gain media. High power and high gain optical amplification in organic dye-doped polymer waveguide amplifier is possible due to extremely large emission cross sections of dyes. Also, an extensive choice of organic dye dopants is possible resulting in amplification covering a wide range in the visible region.

Spray Pyrolysed Zinc Oxide Thin Films : Effects of Doping and Ion Beam Irradiation

In recent years scientists have made rapid and significant advances in the field of semiconductor physics. One of the most important fields of current interest in materials science is the fundamental aspects and applications of conducting transparent oxide thin films (TCO). The characteristic properties of such coatings are low electrical resistivity and high transparency in the visible region. The first semitransparent and electrically conducting CdO film was reported as early as in 1907 [1]. Though early work on these films was performed out of purely scientific interest, substantial technological advances in such films were made after 1940. The technological interest in the study of transparent semiconducting films was generated mainly due to the potential applications of these materials both in industry and research. Such films demonstrated their utility as transparent electrical heaters for windscreens in the aircraft industry. However, during the last decade, these conducting transparent films have been widely used in a variety of other applications such as gas sensors [2], solar cells [3], heat reflectors [4], light emitting devices [5] and laser damage resistant coatings in high power laser technology [6]. Just a few materials dominate the current TCO industry and the two dominant markets for TCO’s are in architectural applications and flat panel displays. The architectural use of TCO is for energy efficient windows. Fluorine doped tin oxide (FTO), deposited using a pyrolysis process is the TCO usually finds maximum application. SnO2 also finds application ad coatings for windows, which are efficient in preventing radiative heat loss, due to low emissivity (0.16). Pyrolitic tin oxide is used in PV modules, touch screens and plasma displays. However indium tin oxide (ITO) is mostly used in the majority of flat panel display (FPD) applications. In FPDs, the basic function of ITO is as transparent electrodes. The volume of FPD’s produced, and hence the volume of ITO coatings produced, continues to grow rapidly. But the current increase in the cost of indium and the scarcity of this material created the difficulty in obtaining low cost TCOs. Hence search for alternative TCO materials has been a topic of active research for the last few decades. This resulted in the development of binary materials like ZnO, SnO2, CdO and ternary materials like II Zn2SnO4, CdSb2O6:Y, ZnSO3, GaInO3 etc. The use of multicomponent oxide materials makes it possible to have TCO films suitable for specialized applications because by altering their chemical compositions, one can control the electrical, optical, chemical and physical properties. But the advantages of using binary materials are the easiness to control the chemical compositions and depositions conditions. Recently, there were reports claiming the deposition of CdO:In films with a resistivity of the order of 10-5 ohm cm for flat panel displays and solar cells. However they find limited use because of Cd-Toxicity. In this regard, ZnO films developed in 1980s, are very useful as these use Zn, an abundant, inexpensive and nontoxic material. Resistivity of this material is still not very low, but can be reduced through doping with group-III elements like In, Al or Ga or with F [6]. Hence there is a great interest in ZnO as an alternative of ITO. In the present study, we prepared and characterized transparent and conducting ZnO thin films, using a cost effective technique viz Chemical Spray Pyrolysis (CSP). This technique is also suitable for large area film deposition. It involves spraying a solution, (usually aqueous) containing soluble salts of the constituents of the desired compound, onto a heated substrate.

Fabrication and Characterization of Spray Pyrolysed Cadmium Sulphide Homojunction Solar Cells

The study on the fabrication and characterization of spray pyrolysed cadmium sulphide homojunction solar cells. As an alternative to the conventional energy source, the PV technology has to be improved. Study about the factors affecting the performance of the existing solar cells and this will result in the enhancement of efficiency of the cells. At the same time it is equally important to have R&D works on developing new photovoltaic devices and processes which are less expensive for large scale production. CdS is an important binary compound semiconductor, which is very useful in the field of photovoltaics. It is very easy to prepare large area CdS thin films. In order to fabricate thin film homojunction cadmium sulphide cells, prepared and characterized SnO2 thin film as the lower electrode, p-CdS as the active layer and n-CdS as window layer. Cadmium material used for the fabrication of homojunction solar cells is highly toxic. The major damage due to continued exposure to low levels of cadmium are on the kidneys, lungs and bones. The real advantage of spray pyrolysis process is that there is no emission of any toxic gases during the deposition. Very low concentration of the chemicals is needed in this process. The risk involved from this material is very low, though they are toxic. On large scale usage it may become necessary that the cells after their life, should be bought back by the companies to retrieve chemicals like cadmium. This will reduce environmental problem and also the material wastage