Fracture modes and acoustic emission characteristics of hydrogen-assisted cracking in high-strength low-alloy steel weldment

The aim of the present paper is to study the relationship between the fracture modes in hydrogen-assisted cracking (HAC) in microalloied steel and the emission of acoustic signals during the fracturing process. For this reason, a flux-cored arc weld (FCAW) was used in a high-strength low-alloy steel. The consumable used were the commercially available AWS E120T5-K4 and had a diameter of 1.6 mm. Two different shielding gases were used (CO2 and CO2+5% H2) to obtain complete phenomenon characterization. The implant test was applied with three levels of restriction stresses. An acoustic emission measurement system (AEMS) was coupled to the implant test apparatus. The output signal from the acoustic emission sensor was passed through an electronic amplifier and processed by a root mean square (RMS) voltage converter. Fracture surfaces were examined by scanning electron microscopy (SEM) and image analysis. Fracture modes were related with the intensity, the energy and the number of the peaks of the acoustic emission signal. The shielding gas CO2+5% H2 proved to be very useful in the experiments. Basically, three different fracture modes were identified in terms of fracture appearance: microvoid coalescence (MVC), intergranular (IG) and quasi-cleavage (QC). The results show that each mode of fracture presents a characteristic acoustic signal.

A modified contour error controller for a high speed XY table

This article deals with a contour error controller (CEC) applied in a high speed biaxial table. It works simultaneously with the table axes controllers, helping them. In the early stages of the investigation, it was observed that its main problem is imprecision when tracking non-linear contours at high speeds. The objectives of this work are to show that this problem is caused by the lack of exactness of the contour error mathematical model and to propose modifications in it. An additional term is included, resulting in a more accurate value of the contour error, enabling the use of this type of motion controller at higher feedrate. The response results from simulated and experimental tests are compared with those of common PID and non-corrected CEC in order to analyse the effectiveness of this controller over the system. The main conclusions are that the proposed contour error mathematical model is simple, accurate, almost insensible to the feedrate and that a 20:1 reduction of the integral absolute contour error is possible.

Influence of duty factor on the die-sinking Electrical Discharge Machining of high-strength aluminum alloy under rough machining

The use of high-strength aluminium alloys as material for injection molding tools to produce small and medium batches of plastic products as well as prototyping molds is becoming of increasing demand by the tooling industry. These alloys are replacing the traditional use of steel in the cases above because they offer many advantages such as very high thermal conductivity associated with good corrosion and wear resistance presenting good machinability in milling and electrical discharge machining operations. Unfortunately there is little technological knowledge on the Electrical Discharge Machining (EDM) of high-strength aluminium alloys, especially about the AMP 8000 alloy. The duty factor, which means the ratio between pulse duration and pulse cycle time exerts an important role on the performance of EDM. This work has carried out an experimental study on the variation of the duty factor in order to analyze its influence on material removal rate and volumetric relative wear under roughing conditions of EDM process. The results showed that high values of duty factor are possible to be applied without bringing instability into the EDM process and with improvement of material removal rate and volumetric relative wear.

Moss diversity in the tropical rainforests of Rio de Janeiro, southeastern Brazil

Moss diversity at various sites in the Tropical Atlantic Rainforest of southeastern Brazil is high, with 338 taxa distributed among 49 families and 129 genera. Comparisons of species richness in the Tropical Atlantic Rainforest in southeastern Brazil suggest that the moss flora is not uniform, and that lowland, montane, submontane, and upper montane Atlantic rainforests have very different moss floras. Montane Atlantic Rainforest has the largest number of exclusive species and the highest species richness, Sub-Montane Atlantic Rainforest has intermediate species richness, while the Lowland Atlantic Rainforest has fewer species. The high diversity of the Montane Atlantic Rainforest could be explained by the diversity of climatic, edaphic, and physiographic changes of the vegetation. Sematophyllaceae accounted for 19% of the taxa in lowland forest, Meteoriaceae for 10% of the taxa in montane forests, and Dicranaceae for 18% of the taxa in upper montane forests. Taxa with broad Neotropical distributions (40% of the total taxa) are important elements in all the forests, while taxa restricted to Brazil comprise the second most important element in upper montane and montane forests.

Leaf damage in a mangrove swamp at Sepetiba Bay, Rio de Janeiro, Brazil

Leaf damage to Rhizophora mangle L., Avicennia schaueriana Stapf. & Leechman, and Laguncularia racemosa L. was studied in a two hectare mangrove swamp site in Sepetiba Bay. Seventeen arthropod morphospecies were identified as being responsible for the damage, and their species diversity was highest on A. schaueriana, followed by R. mangle and L. racemosa. Damage in terms of relative area was greatest in L. racemosa. Almost 9% of mangrove canopy leaf area demonstrated some damage. Loss of leaf area to herbivory was 12.1%, 8.3% and 6.2% in L. racemosa, A. schaueriana and R. mangle respectively. L. racemosa and A. schaueriana showed high percentages of leaf-margin damage in terms of the total damaged leaf area (82.2% and 56.3% respectively), while the most important type of damage in R. mangle was necrosis, representing 58.1% of the total damaged leaf area.

Allozyme variation in a natural population of Stryphnodendron adstringens in the Rio Preto State Park, southeastern Brazil

Leaves and fruits from 63 Stryphnodendron adstringens trees were sampled in the Rio Preto State Park to analyze allozyme segregation, tissue specific expression of allozyme loci, and their genetic parameters. The enzyme systems ADH, EST, ACP, PGM, PGI, GDH, G6PDH, GOT, IDH, LAP, MDH, PER and SKDH were assessed by means of starch-gel electrophoresis. The polymorphic systems PGI, IDH, MDH and GOT demonstrated a dimeric quaternary structure, while EST and PER were monomeric. The total expected genetic diversity (H E) for leaves and seeds were 0.325 and 0.244 respectively. The effective number of alleles per locus (A E) was 1.58 in leaves and 1.42 in seeds. The values of H E and A E observed in S. adstringens were comparatively higher than the average values seen in allozyme studies of other woody plants. The values of the fixation indices for the population, considering leaves (f = 0.070) and seeds (f = 0.107), were not significant. The high values of genetic diversity and of effective number of alleles per locus, as well as the non-significant fixation index and the adjustments of the Hardy-Weinberg proportions between generations for the pgi-1, mdh-2 and idh-1 loci, indicated random mating in this population. The enzyme systems EST and PER demonstrated their best resolution in leaf tissues, while the MDH, IDH, PGI and GOT systems demonstrated their best resolution in seed tissues.

Prevalence and risk factors for HBV, HCV and HDV infections among injecting drug users from Rio de Janeiro, Brazil

Viral hepatitis constitutes a major health issue, with high prevalence among injecting drug users (IDUs). The present study assessed the prevalence and risk determinants for hepatitis B, C and D viruses (HBV, HCV and HDV) infections among 102 IDUs from Rio de Janeiro, Brazil. Serological markers and HCV-RNA were detected by enzyme immunoassay and nested PCR, respectively. HCV genotyping was determined by restriction fragment length polymorphism analysis (RFLP). HBsAg, anti-HBc and anti-HBs were found in 7.8, 55.8 and 24.7% of IDUs, respectively. In the final logistic regression, HBV infection was independently associated with male homosexual intercourse within the last 5 years (odds ratio (OR) 3.1; 95% confidence interval (CI) 1.1-8.8). No subject presented anti-delta (anti-HD). Anti-HCV was detected in 69.6% of subjects, and was found to be independently associated with needle sharing in the last 6 months (OR 3.4; 95% CI 1.3-9.2) and with longer duration of iv drug use (OR 3.1; 95% CI 1.1-8.7). These data demonstrate that this population is at high risk for both HBV and HCV infection. Among IDUs from Rio de Janeiro, unprotected sexual intercourse seems to be more closely associated with HBV infection, whereas HCV is positively correlated with high risk injecting behavior. Comprehensive public health interventions targeting this population and their sexual partners must be encouraged.

Genetic variability of hepatitis A virus isolates in Rio de Janeiro: implications for the vaccination of school children

The epidemiology of hepatitis A virus (HAV) infection is shifting from high to intermediate endemicity in Brazil, resulting in increased numbers of susceptible individuals and a greater potential for the emergence of outbreaks. Universal vaccination against HAV has been recommended for children, but updated sero-epidemiological data are necessary to analyze the level of natural immunity and to identify candidates for preventive measures. In addition, more molecular studies are necessary to characterize the genotypes involved in HAV infections and outbreaks. Sera from 299 school children (5-15 years old) and 25 school staff members, collected during an outbreak of HAV at a rural public school in June 2000, were tested for IgM and total anti-HAV antibodies (ELISA). Viral RNA was amplified by RT-PCR from anti-HAV IgM-positive sera and from 19 fecal samples. Direct nucleotide sequencing of the VP1/2A region was carried out on 18 PCR-positive samples. Acute HAV infection was detected by anti-HAV IgM in 93/299 children and in 3/25 adult staff members. The prevalence of total anti-HAV antibodies in IgM-negative children under 5 years of age was only 10.5%. HAV-RNA was detected in 46% IgM-positive serum samples and in 16% stool samples. Sequence analysis showed that half the isolates belonged to subgenotype IA and the other half to IB. On the basis of these data, mass vaccination against HAV is recommended without prevaccination screening, especially for children before they enter school, since nearly 90% of the children under 5 years were susceptible. Molecular characterization indicated the endemic circulation of specific HAV strains belonging to subgenotypes IA and IB.

Highlights of the 3rd International Conference on High Pressure Bioscience and Biotechnology

The 3rd International Conference on High Pressure Bioscience and Biotechnology was held in the city of Rio de Janeiro from September 27 to September 30, 2004. The meeting, promoted by the International Association of High Pressure Bioscience and Biotechnology (IAHPBB), congregated top scientists and researchers from all over the world. In common, they shared the use of hydrostatic pressure for research, technical development, or industrial applications. The meeting consisted of invited lectures, contributed papers and a well-attended poster session. Very exciting discussions were held inside and outside the sessions, and the goals of discussing state-of-the-art data and establishing working collaborations and co-operations were fully attained.

The association of ACE gene D/I polymorphism with cardiovascular risk factors in a population from Rio de Janeiro

Our aim was to determine the frequencies of the angiotensin-converting enzyme (ACE) gene alleles D and I and any associations to cardiovascular risk factors in a population sample from Rio de Janeiro, Brazil. Eighty-four adults were selected consecutively during a 6-month period from a cohort subgroup of a previous large cross-sectional survey in Rio de Janeiro. Anthropometric data and blood pressure measurements, echocardiogram, albuminuria, glycemia, lipid profile, and ACE genotype and serum enzyme activity were determined. The frequency of the ACE*D and I alleles in the population under study, determined by PCR, was 0.59 and 0.41, respectively, and the frequencies of the DD, DI, and II genotypes were 0.33, 0.51, and 0.16, respectively. No association between hypertension and genotype was detected using the Kruskal-Wallis method. Mean plasma ACE activity (U/mL) in the DD (N = 28), DI (N = 45) and II (N = 13) groups was 43 (in males) and 52 (in females), 37 and 39, and 22 and 27, respectively; mean microalbuminuria (mg/dL) was 1.41 and 1.6, 0.85 and 0.9, and 0.6 and 0.63, respectively; mean HDL cholesterol (mg/dL) was 40 and 43, 37 and 45, and 41 and 49, respectively, and mean glucose (mg/dL) was 93 and 108, 107 and 98, and 85 and 124, respectively. A high level of ACE activity and albuminuria, and a low level of HDL cholesterol and glucose, were found to be associated with the DD genotype. Finally, the II genotype was found to be associated with variables related to glucose intolerance.

High-Tech Commercialization Research Projects: A Pragmatic View

In the Finnish university society the commercialization research projects has not been a focus of interest until now. The reasons for the growing interest towards commercialization research projects are their possibility to develop our economy simultaneously by providing new technologies and products. This study focuses on the examination of what kind of high-technology oriented research can be commercialized and how. The aim is to generate understanding of how commercialization research projects should proceed and to find concrete ways of improving the of commercialization research projects. As its research method, the study analyzes four different university high-technology research projects which have been commercially oriented and have to some degree been able to commercialize the product or technology developed during the research phase. The data has been gathered mainly by semi-structured interviews of people involved in these particular projects or cases. The findings from the interviews have been reflected to the final reports of the projects, provided by TEKES, and later on the data gained has been compared to each other. Also a literature review has been produced about the subject of commercializing university research with the purpose of providing known theories and framework connected with the subject. The study reveals five main factors related to commercializing high-tech research. These factors are: The Team, Market potential and competitiveness, Product and technology, Funding and Steering Group. Also the uncertainties related to these factors have been addressed. As a conclusion the study provides the main aspects that should be considered when starting a commercialization research project. Also a combining hierarchical framework has been provided related to the five factors presented. In Chapter 5 the study addresses the main tasks or steps to be taken in order to get public funding for a commercially oriented research project and later on the actual steps to be executed in order to successfully commercialize these high-tech research projects.

Detection of enterotoxins produced by B. cereus through PCR analysis of ground and roasted coffee samples in Rio de Janeiro, Brazil

Coffee is one of the most appreciated drinks in the world. Coffee ground is obtained from the fruit of a small plant that belongs to the genus Coffea. Coffea arabica and Coffea canephora robusta are the two most commercially important species. They are more commonly known as arabica and robusta, respectively. Two-thirds of Coffea arabica plants are grown in South and Central America, and Eastern Africa - the place of origin for this coffee species. Contamination by microorganisms has been a major matter affecting coffee quality in Brazil, mainly due to the harvesting method adopted. Brazilian harvests are based on fruits collected from the ground mixed with those that fall on collection cloths. As the Bacillus cereus bacterium frequently uses the soil as its environmental reservoir, it is easily capable of becoming a contaminant. This study aimed to evaluate the contamination and potential of B. cereus enterotoxin genes encoding the HBL and NHE complexes, which were observed in strains of ground and roasted coffee samples sold in Rio de Janeiro. The PCR (Polymerase Chain Reaction) results revealed high potential of enterotoxin production in the samples. The method described by Speck (1984) was used for the isolation of contaminants. The investigation of the potential production of enterotoxins through isolates of the microorganism was performed using the B. cereus enterotoxin Reverse Passive Latex Agglutination test-kit (BCET-RPLA, Oxoid), according to the manufacturer's instructions. The potential of enterotoxin production was investigated using polymerase chain reaction (PCR) methods for hblA, hblD and hblC genes (encoding hemolysin HBL) and for nheA, nheB and nheC genes (encoding non-hemolytic enterotoxin - NHE). Of all the 17 strains, 100% were positive for at least 1 enterotoxin gene; 52.9% (9/17) were positive for the 3 genes encoding the HBL complex; 35.3% (6/17) were positive for the three NHE encoding genes; and 29.4% (5/17) were positive for all enterotoxic genes.