Creating physical education in remote Australian schools: Overcoming the tyranny of distance through communities of practice

This paper reports on a qualitative case study undertaken in a remote part of Queensland, Australia. While there is some modest agreement about the capacity of contemporary information technologies to overcome the problems of schooling in areas of extreme remoteness, generally, children educated in such contexts are considered to be disadvantaged. The experiential areas of the curriculum, which often require specific teaching expertise, present the greatest challenge to teachers, and of these, physical education is perhaps the most problematic. This research reports on a case study of three remote Queensland multi-age primary (elementary) schools that come together to form a community of practice to overcome the problems of teaching physical education in such difficult circumstances. Physical education is constructed in these contexts by blurring the school and community boundaries, by contextualizing the subject content to make it relevant, and by adjusting the school day to accommodate potential physical education experiences. Each community gathers its collective experience to ensure the widest possible experiences are made available for the children. In doing so, the children develop a range of competencies that enable seamless transition to boarding high schools.

Assimilation of remote sensing and hydrological data using adaptive filtering techniques for watershed modelling

The knowledge of hydrological variables (e. g. soil moisture, evapotranspiration) are of pronounced importance in various applications including flood control, agricultural production and effective water resources management. These applications require the accurate prediction of hydrological variables spatially and temporally in watershed/basin. Though hydrological models can simulate these variables at desired resolution (spatial and temporal), often they are validated against the variables, which are either sparse in resolution (e. g. soil moisture) or averaged over large regions (e. g. runoff). A combination of the distributed hydrological model (DHM) and remote sensing (RS) has the potential to improve resolution. Data assimilation schemes can optimally combine DHM and RS. Retrieval of hydrological variables (e. g. soil moisture) from remote sensing and assimilating it in hydrological model requires validation of algorithms using field studies. Here we present a review of methodologies developed to assimilate RS in DHM and demonstrate the application for soil moisture in a small experimental watershed in south India.

Optical, radiative, and source characteristics of aerosols at Minicoy, a remote island in the southern Arabian Sea

Extensive measurements of aerosol radiative and microphysical properties were made at an island location, Minicoy (8.3 degrees N, 73.04 degrees E) in the southern Arabian Sea. A large variability in aerosol characteristics associated with changes in air mass and precipitation characteristics was observed. Six distinct transport pathways were identified on the basis of cluster analysis. The Indo-Gangetic Plain, along with the northern Arabian Sea and west Asia (NWA), was identified to be the region having the highest potential for aerosol mass loading at the island. This estimate is based on the concentration weighted trajectory as well as cluster analysis. Dust transport from the NWA region was found to make a substantial contribution to the supermicron mass fraction. The black carbon mass mixing ratios observed were the lowest compared to previous measurements over this region. Consequently, the atmospheric radiative forcing efficiency was low and was in the range 10-28 W m(-2).

Green Falcon IV: An Unmanned Aerial System and an integrated Wireless Sensor Network for remote sensing tasks

This report summarises the development of an Unmanned Aerial System and an integrated Wireless Sensor Network (WSN), suitable for the real world application in remote sensing tasks. Several aspects are discussed and analysed to provide improvements in flight duration, performance and mobility of the UAV, while ensuring the accuracy and range of data from the wireless sensor system.

Decision fusion for reliable flood mapping using remote sensing images

Flood extent mapping is a basic tool for flood damage assessment, which can be done by digital classification techniques using satellite imageries, including the data recorded by radar and optical sensors. However, converting the data into the information we need is not a straightforward task. One of the great challenges involved in the data interpretation is to separate the permanent water bodies and flooding regions, including both the fully inundated areas and the wet areas where trees and houses are partly covered with water. This paper adopts the decision fusion technique to combine the mapping results from radar data and the NDVI data derived from optical data. An improved capacity in terms of identifying the permanent or semi-permanent water bodies from flood inundated areas has been achieved. Computer software tools Multispec and Matlab were used.

‘Enough is enough’: Songs and messages about alcohol in remote Central Australia

This article examines some of the ways in which Australia’s First Peoples have responded to serious community health concerns about alcohol through the medium of popular music. The writing, performing and recording of popular songs about alcohol provide an important example of community-led responses to health issues, and the effectiveness of music in communicating stories and messages about alcohol has been recognised through various government-funded recording projects. This article describes some of these issues in remote Australian Aboriginal communities, exploring a number of complexities that arise through arts-based ‘instrumentalist’ approaches to social and health issues. It draws on the author’s own experience and collaborative work with Aboriginal musicians in Tennant Creek, a remote town in Australia’s Northern Territory.

Discovering mentorship information from author collaboration networks

Researchers are assessed from a researcher-centric perspective - by quantifying a researcher's contribution to the field. Citation and publication counts are some typical examples. We propose a student-centric measure to assess researchers on their mentoring abilities. Our approach quantifies benefits bestowed by researchers upon their students by characterizing the publication dynamics of research advisor-student interactions in author collaboration networks. We show that our measures could help aspiring students identify research advisors with proven mentoring skills. Our measures also help in stratification of researchers with similar ranks based on typical indices like publication and citation counts while being independent of their direct influences.

East Asian audio-visual collaboration and the global expansion of Chinese media

In recent years, many of the world’s leading media producers, screenwriters, technicians and investors, particularly those in the Asia-Pacific region, have been drawn to work in the People's Republic of China (hereafter China or Mainland China). Media projects with a lighter commercial entertainment feel – compared with the heavy propaganda-oriented content of the past – have multiplied, thanks to the Chinese state’s newfound willingness to consider collaboration with foreign partners. This is no more evident than in film. Despite their long-standing reputation for rigorous censorship, state policymakers are now encouraging Chinese media entrepreneurs to generate fresh ideas and to develop products that will revitalise the stagnant domestic production sector. It is hoped that an increase in both the quality and quantity of domestic feature films, stimulated by an infusion of creativity and cutting-edge technology from outside the country, will help reverse China’s ‘cultural trade deficit’ (wenhua maoyi chizi) (Keane 2007).

Multiwavelength studies of regolith effects in planetary remote sensing

A large proportion of our knowledge about the surfaces of atmosphereless solar-system bodies is obtained through remote-sensing measurements. The measurements can be carried out either as ground-based telescopic observations or space-based observations from orbiting spacecraft. In both cases, the measurement geometry normally varies during the observations due to the orbital motion of the target body, the spacecraft, etc.. As a result, the data are acquired over a variety of viewing and illumination angles. Surfaces of planetary bodies are usually covered with a layer of loose, broken-up rock material called the regolith whose physical properties affect the directional dependence of remote-sensed measurements. It is of utmost importance for correct interpretation of the remote-sensed data to understand the processes behind this alteration. In the thesis, the multi-angular effects that the physical properties of the regolith have on remote-sensing measurements are studied in two regimes of electromagnetic radiation, visible to near infrared and soft X-rays. These effects are here termed generally the regolith effects in remote sensing. Although the physical mechanisms that are important in these regions are largely different, notable similarities arise in the methodology that is used in the study of the regolith effects, including the characterization of the regolith both in experimental studies and in numerical simulations. Several novel experimental setups have been constructed for the thesis. Alongside the experimental work, theoretical modelling has been carried out, and results from both approaches are presented. Modelling of the directional behaviour of light scattered from a regolith is utilized to obtain shape and spin-state information of several asteroids from telescopic observations and to assess the surface roughness and single-scattering properties of lunar maria from spacecraft observations. One of the main conclusions is that the azimuthal direction is an important factor in detailed studies of planetary surfaces. In addition, even a single parameter, such as porosity, can alter the light scattering properties of a regolith significantly. Surface roughness of the regolith is found to alter the elemental fluorescence line ratios of a surface obtained through planetary soft X-ray spectrometry. The results presented in the thesis are among the first to report this phenomenon. Regolith effects need to be taken into account in the analysis of remote-sensed data, providing opportunities for retrieving physical parameters of the surface through inverse methods.

Realisation of University-Industry Collaboration through Industry-Based Learning at Indonesian Higher Education

The collaboration between universities and industries has become increasingly important for the development of Science and Technology. This is particularly more prominent in the Science Technology Engineering and Mathematics (STEM) disciplines. Literature suggest that the key element of University-Industry Partnership (UIP) is the exchange of knowledge that is mutually beneficial for both parties. One real example of the collaborations is Industry-Based Learning (IBL) in which university students are coming into industries to experience and learn how the skills and knowledge acquired in the classroom are implemented in work places. This paper investigate how the University-Industry Collaboration program is implemented though Industry-Based Learning (IBL) at Indonesian Universities. The research findings offer useful insights and create a new knowledge in the field of STEM education and collaborative learning. The research will contribute to existing knowledge by providing empirical understanding of this topic. The outcomes can be used to improve the quality of University-Industry Partnership programs at Indonesian Universities and inform Indonesian higher education authorities and their industrial partners of an alternative approach to enhance their IBL programs.

Youth programs in remote Indigenous communities: Context matters

A diversity of programs oriented to young people seek to develop their capacities and their connection to the communities in which they live. Some focus on ameliorating a particular issue or ‘deficit’ whilst others, such as sporting, recreation and youth groups are more grounded in the community. This article reports a qualitative study undertaken in three remote Indigenous communities in Central Australia. Sixty interviews were conducted with a range of stakeholders involved in a diversity of youth programs. A range of critical challenges for and characteristics of remote Indigenous youth programs are identified if such programs are to be ‘fit for context’. ‘Youth centred-context specific’ provides a positive frame for the delivery of youth programs in remote Central Australia, encouraging an explicit focus on program logic; program content and processes; and relational, temporal, and, spatial aspects of the practice context. These provide lenses with which youth program planning and delivery may be enhanced in remote communities. Culturally safe service planning and delivery suggests locally determined processes for decision-making and community ownership. In some cases, this may mean a community preference for all ages to access the service to engage in culturally relevant activities. Where activities are targeted at young people, yet open to and inclusive of all ages, they provide a medium for cross-generational interaction that requires a high degree of flexibility on the part of staff and funding programs. Although the findings are focused in Central Australia, they may be relevant to similar contexts elsewhere.

Insights from stimulating creative behaviours in a project-based organization team

Novel and useful ideas and creative behaviours originate in varied work environments, yet the characteristics of work environments that stimulate and foster such creative behaviours are not well defined. The aim of this study was to identify the influences that contribute to creative behaviours in the work environment of a global project-based professional service organization. This article is based on an investigation of the work environment of one project team undertaking interdisciplinary work in the construction of a processing plant in a remote location. This multi-disciplinary team encouraged creative behaviours through regular team meetings, ensuring the presentation of diverse views and commitments to regular interaction and collaboration in co-located environments. In addition, a technology manager dedicated to identifying potential opportunities for patenting and commercialization further extended the creative behaviours of the team by focusing on the best solution for each situation. The study contributes new knowledge to research regarding work environments that facilitate creative behaviours.