Innovation Processes and Industrial Districts

In this survey, we examine the operations of innovation processes within industrial districts by exploring the ways in which differentiation, specialization, and integration affect the generation, diffusion, and use of new knowledge in such districts. We begin with an analysis of the importance of the division of labor and then investigate the effects of social embeddedness on innovation. We also consider the effect of forms of organization within industrial districts at various stages of product and process life, and we examine the negative aspects of embeddedness for innovation. We conclude with a discussion of the possible consequences of new information and communications technologies on innovation in industrial districts.

Chapter 5 Product Differentiation versus Geographical Differentiation: Evidence from the Pork Processing Industry in China

This chapter attempts to identify whether product differentiation or geographical differentiation is the main source of profit for firms in developing economies by employing a simple idea from the recently developed method of empirical industrial organization. Theoretically, location choice and product choice have been considered as analogues in differentiation, but in the real world, which of these strategies is chosen will result in an immense difference in firm behavior and in the development process of the industry. Development of the technique of empirical industrial organization enabled us to identify market outcomes with endogeneity. A typical case is the market outcome with differentiation, where price or product choice is endogenously determined. Our original survey contains data on market location, differences in product types, and price. The results show that product differentiation rather than geographical differentiation mitigates pressure on price competition, but 70 per cent secures geographical monopoly.

Road environment modeling using robust perspective analysis and recursive Bayesian segmentation

Recently, vision-based advanced driver-assistance systems (ADAS) have received a new increased interest to enhance driving safety. In particular, due to its high performance–cost ratio, mono-camera systems are arising as the main focus of this field of work. In this paper we present a novel on-board road modeling and vehicle detection system, which is a part of the result of the European I-WAY project. The system relies on a robust estimation of the perspective of the scene, which adapts to the dynamics of the vehicle and generates a stabilized rectified image of the road plane. This rectified plane is used by a recursive Bayesian classi- fier, which classifies pixels as belonging to different classes corresponding to the elements of interest of the scenario. This stage works as an intermediate layer that isolates subsequent modules since it absorbs the inherent variability of the scene. The system has been tested on-road, in different scenarios, including varied illumination and adverse weather conditions, and the results have been proved to be remarkable even for such complex scenarios.

University-industry technology transfer models: an empirical analysis

The aim of this paper is to contribute to the understanding of the underlying factors in the process of transferring technology from university to industry. Findings point to strategic importance of critical factors as the definition of common objectives, cooperation, motivation, and the elimination of technical and legal barriers. These challenges must have implications in the incorporation of cooperative aspects of research projects in the design of public innovation policies.

Microstructural segmentation of 3D images of alsphalt specimen using Matlab engine

En este proyecto se ha desarrollado un código de MATLAB para el procesamiento de imágenes tomográficas 3D, de muestras de asfalto de carreteras en Polonia. Estas imágenes en 3D han sido tomadas por un equipo de investigación de la Universidad Tecnológica de Lodz (LUT). El objetivo de este proyecto es crear una herramienta que se pueda utilizar para estudiar las diferentes muestras de asfalto 3D y pueda servir para estudiar las pruebas de estrés que experimentan las muestras en el laboratorio. Con el objetivo final de encontrar soluciones a la degradación sufrida en las carreteras de Polonia, debido a diferentes causas, como son las condiciones meteorológicas. La degradación de las carreteras es un tema que se ha investigado desde hace muchos años, debido a la fuerte degradación causada por diferentes factores como son climáticos, la falta de mantenimiento o el tráfico excesivo en algunos casos. Es en Polonia, donde estos tres factores hacen que la composición de muchas carreteras se degrade rápidamente, sobre todo debido a las condiciones meteorológicas sufridas a lo largo del año, con temperaturas que van desde 30° C en verano a -20° C en invierno. Esto hace que la composición de las carreteras sufra mucho y el asfalto se levante, lo que aumenta los costos de mantenimiento y los accidentes de carretera. Este proyecto parte de la base de investigación que se lleva a cabo en la LUT, tratando de mejorar el análisis de las muestras de asfalto, por lo que se realizarán las pruebas de estrés y encontrar soluciones para mejorar el asfalto en las carreteras polacas. Esto disminuiría notablemente el costo de mantenimiento. A pesar de no entrar en aspectos muy técnicos sobre el asfalto y su composición, se ha necesitado realizar un estudio profundo sobre todas sus características, para crear un código capaz de obtener los mejores resultados. Por estas razones, se ha desarrollado en Matlab, los algoritmos que permiten el estudio de los especímenes 3D de asfalto. Se ha utilizado este software, ya que Matlab es una poderosa herramienta matemática que permite operar con matrices para realización de operaciones rápidamente, permitiendo desarrollar un código específico para el tratamiento y procesamiento de imágenes en 3D. Gracias a esta herramienta, estos algoritmos realizan procesos tales como, la segmentación de la imagen 3D, pre y post procesamiento de la imagen, filtrado o todo tipo de análisis microestructural de las muestras de asfalto que se están estudiando. El código presentado para la segmentación de las muestras de asfalto 3D es menos complejo en su diseño y desarrollo, debido a las herramientas de procesamiento de imágenes que incluye Matlab, que facilitan significativamente la tarea de programación, así como el método de segmentación utilizado. Respecto al código, este ha sido diseñado teniendo en cuenta el objetivo de facilitar el trabajo de análisis y estudio de las imágenes en 3D de las muestras de asfalto. Por lo tanto, el principal objetivo es el de crear una herramienta para el estudio de este código, por ello fue desarrollado para que pueda ser integrado en un entorno visual, de manera que sea más fácil y simple su utilización. Ese es el motivo por el cual todos estos algoritmos y funciones, que ha sido desarrolladas, se integrarán en una herramienta visual que se ha desarrollado con el GUIDE de Matlab. Esta herramienta ha sido creada en colaboración con Jorge Vega, y fue desarrollada en su proyecto final de carrera, cuyo título es: Segmentación microestructural de Imágenes en 3D de la muestra de asfalto utilizando Matlab. En esta herramienta se ha utilizado todo las funciones programadas en este proyecto, y tiene el objetivo de desarrollar una herramienta que permita crear un entorno gráfico intuitivo y de fácil uso para el estudio de las muestras de 3D de asfalto. Este proyecto se ha dividido en 4 capítulos, en un primer lugar estará la introducción, donde se presentarán los aspectos más importante que se va a componer el proyecto. En el segundo capítulo se presentarán todos los datos técnicos que se han tenido que estudiar para desarrollar la herramienta, entre los que cabe los tres temas más importantes que se han estudiado en este proyecto: materiales asfálticos, los principios de la tomografías 3D y el procesamiento de imágenes. Esta será la base para el tercer capítulo, que expondrá la metodología utilizada en la elaboración del código, con la explicación del entorno de trabajo utilizado en Matlab y todas las funciones de procesamiento de imágenes utilizadas. Además, se muestra todo el código desarrollado, así como una descripción teórica de los métodos utilizados para el pre-procesamiento y segmentación de las imagenes en 3D. En el capítulo 4, se mostrarán los resultados obtenidos en el estudio de una de las muestras de asfalto, y, finalmente, el último capítulo se basa en las conclusiones sobre el desarrollo de este proyecto. En este proyecto se ha llevado han realizado todos los puntos que se establecieron como punto de partida en el anteproyecto para crear la herramienta, a pesar de que se ha dejado para futuros proyectos nuevas posibilidades de este codigo, como por ejemplo, la detección automática de las diferentes regiones de una muestra de asfalto debido a su composición. Como se muestra en este proyecto, las técnicas de procesamiento de imágenes se utilizan cada vez más en multitud áreas, como pueden ser industriales o médicas. En consecuencia, este tipo de proyecto tiene multitud de posibilidades, y pudiendo ser la base para muchas nuevas aplicaciones que se puedan desarrollar en un futuro. Por último, se concluye que este proyecto ha contribuido a fortalecer las habilidades de programación, ampliando el conocimiento de Matlab y de la teoría de procesamiento de imágenes. Del mismo modo, este trabajo proporciona una base para el desarrollo de un proyecto más amplio cuyo alcance será una herramienta que puedas ser utilizada por el equipo de investigación de la Universidad Tecnológica de Lodz y en futuros proyectos. ABSTRACT In this project has been developed one code in MATLAB to process X-ray tomographic 3D images of asphalt specimens. These images 3D has been taken by a research team of the Lodz University of Technology (LUT). The aim of this project is to create a tool that can be used to study differents asphalt specimen and can be used to study them after stress tests undergoing the samples. With the final goal to find solutions to the degradation suffered roads in Poland due to differents causes, like weather conditions. The degradation of the roads is an issue that has been investigated many years ago, due to strong degradation suffered caused by various factors such as climate, poor maintenance or excessive traffic in some cases. It is in Poland where these three factors make the composition of many roads degrade rapidly, especially due to the weather conditions suffered along the year, with temperatures ranging from 30 o C in summer to -20 ° C in winter. This causes the roads suffers a lot and asphalt rises shortly after putting, increasing maintenance costs and road accident. This project part of the base that research is taking place at the LUT, in order to better analyze the asphalt specimens, they are tested for stress and find solutions to improve the asphalt on Polish roads. This would decrease remarkable maintenance cost. Although this project will not go into the technical aspect as asphalt and composition, but it has been required a deep study about all of its features, to create a code able to obtain the best results. For these reasons, there have been developed in Matlab, algorithms that allow the study of 3D specimens of asphalt. Matlab is a powerful mathematical tool, which allows arrays operate fastly, allowing to develop specific code for the treatment and processing of 3D images. Thus, these algorithms perform processes such as the multidimensional matrix sgementation, pre and post processing with the same filtering algorithms or microstructural analysis of asphalt specimen which being studied. All these algorithms and function that has been developed to be integrated into a visual tool which it be developed with the GUIDE of Matlab. This tool has been created in the project of Jorge Vega which name is: Microstructural segmentation of 3D images of asphalt specimen using Matlab engine. In this tool it has been used all the functions programmed in this project, and it has the aim to develop an easy and intuitive graphical environment for the study of 3D samples of asphalt. This project has been divided into 4 chapters plus the introduction, the second chapter introduces the state-of-the-art of the three of the most important topics that have been studied in this project: asphalt materials, principle of X-ray tomography and image processing. This will be the base for the third chapter, which will outline the methodology used in developing the code, explaining the working environment of Matlab and all the functions of processing images used. In addition, it will be shown all the developed code created, as well as a theoretical description of the methods used for preprocessing and 3D image segmentation. In Chapter 4 is shown the results obtained from the study of one of the specimens of asphalt, and finally the last chapter draws the conclusions regarding the development of this project.

Utilizing the Internet of Things to promote energy awareness and efficiency at discrete production processes: Practices and methodology

El actual contexto de fabricación, con incrementos en los precios de la energía, una creciente preocupación medioambiental y cambios continuos en los comportamientos de los consumidores, fomenta que los responsables prioricen la fabricación respetuosa con el medioambiente. El paradigma del Internet de las Cosas (IoT) promete incrementar la visibilidad y la atención prestada al consumo de energía gracias tanto a sensores como a medidores inteligentes en los niveles de máquina y de línea de producción. En consecuencia es posible y sencillo obtener datos de consumo de energía en tiempo real proveniente de los procesos de fabricación, pero además es posible analizarlos para incrementar su importancia en la toma de decisiones. Esta tesis pretende investigar cómo utilizar la adopción del Internet de las Cosas en el nivel de planta de producción, en procesos discretos, para incrementar la capacidad de uso de la información proveniente tanto de la energía como de la eficiencia energética. Para alcanzar este objetivo general, la investigación se ha dividido en cuatro sub-objetivos y la misma se ha desarrollado a lo largo de cuatro fases principales (en adelante estudios). El primer estudio de esta tesis, que se apoya sobre una revisión bibliográfica comprehensiva y sobre las aportaciones de expertos, define prácticas de gestión de la producción que son energéticamente eficientes y que se apoyan de un modo preeminente en la tecnología IoT. Este primer estudio también detalla los beneficios esperables al adoptar estas prácticas de gestión. Además, propugna un marco de referencia para permitir la integración de los datos que sobre el consumo energético se obtienen en el marco de las plataformas y sistemas de información de la compañía. Esto se lleva a cabo con el objetivo último de remarcar cómo estos datos pueden ser utilizados para apalancar decisiones en los niveles de procesos tanto tácticos como operativos. Segundo, considerando los precios de la energía como variables en el mercado intradiario y la disponibilidad de información detallada sobre el estado de las máquinas desde el punto de vista de consumo energético, el segundo estudio propone un modelo matemático para minimizar los costes del consumo de energía para la programación de asignaciones de una única máquina que deba atender a varios procesos de producción. Este modelo permite la toma de decisiones en el nivel de máquina para determinar los instantes de lanzamiento de cada trabajo de producción, los tiempos muertos, cuándo la máquina debe ser puesta en un estado de apagada, el momento adecuado para rearrancar, y para pararse, etc. Así, este modelo habilita al responsable de producción de implementar el esquema de producción menos costoso para cada turno de producción. En el tercer estudio esta investigación proporciona una metodología para ayudar a los responsables a implementar IoT en el nivel de los sistemas productivos. Se incluye un análisis del estado en que se encuentran los sistemas de gestión de energía y de producción en la factoría, así como también se proporcionan recomendaciones sobre procedimientos para implementar IoT para capturar y analizar los datos de consumo. Esta metodología ha sido validada en un estudio piloto, donde algunos indicadores clave de rendimiento (KPIs) han sido empleados para determinar la eficiencia energética. En el cuarto estudio el objetivo es introducir una vía para obtener visibilidad y relevancia a diferentes niveles de la energía consumida en los procesos de producción. El método propuesto permite que las factorías con procesos de producción discretos puedan determinar la energía consumida, el CO2 emitido o el coste de la energía consumida ya sea en cualquiera de los niveles: operación, producto o la orden de fabricación completa, siempre considerando las diferentes fuentes de energía y las fluctuaciones en los precios de la misma. Los resultados muestran que decisiones y prácticas de gestión para conseguir sistemas de producción energéticamente eficientes son posibles en virtud del Internet de las Cosas. También, con los resultados de esta tesis los responsables de la gestión energética en las compañías pueden plantearse una aproximación a la utilización del IoT desde un punto de vista de la obtención de beneficios, abordando aquellas prácticas de gestión energética que se encuentran más próximas al nivel de madurez de la factoría, a sus objetivos, al tipo de producción que desarrolla, etc. Así mismo esta tesis muestra que es posible obtener reducciones significativas de coste simplemente evitando los períodos de pico diario en el precio de la misma. Además la tesis permite identificar cómo el nivel de monitorización del consumo energético (es decir al nivel de máquina), el intervalo temporal, y el nivel del análisis de los datos son factores determinantes a la hora de localizar oportunidades para mejorar la eficiencia energética. Adicionalmente, la integración de datos de consumo energético en tiempo real con datos de producción (cuando existen altos niveles de estandarización en los procesos productivos y sus datos) es esencial para permitir que las factorías detallen la energía efectivamente consumida, su coste y CO2 emitido durante la producción de un producto o componente. Esto permite obtener una valiosa información a los gestores en el nivel decisor de la factoría así como a los consumidores y reguladores. ABSTRACT In today‘s manufacturing scenario, rising energy prices, increasing ecological awareness, and changing consumer behaviors are driving decision makers to prioritize green manufacturing. The Internet of Things (IoT) paradigm promises to increase the visibility and awareness of energy consumption, thanks to smart sensors and smart meters at the machine and production line level. Consequently, real-time energy consumption data from the manufacturing processes can be easily collected and then analyzed, to improve energy-aware decision-making. This thesis aims to investigate how to utilize the adoption of the Internet of Things at shop floor level to increase energy–awareness and the energy efficiency of discrete production processes. In order to achieve the main research goal, the research is divided into four sub-objectives, and is accomplished during four main phases (i.e., studies). In the first study, by relying on a comprehensive literature review and on experts‘ insights, the thesis defines energy-efficient production management practices that are enhanced and enabled by IoT technology. The first study also explains the benefits that can be obtained by adopting such management practices. Furthermore, it presents a framework to support the integration of gathered energy data into a company‘s information technology tools and platforms, which is done with the ultimate goal of highlighting how operational and tactical decision-making processes could leverage such data in order to improve energy efficiency. Considering the variable energy prices in one day, along with the availability of detailed machine status energy data, the second study proposes a mathematical model to minimize energy consumption costs for single machine production scheduling during production processes. This model works by making decisions at the machine level to determine the launch times for job processing, idle time, when the machine must be shut down, ―turning on‖ time, and ―turning off‖ time. This model enables the operations manager to implement the least expensive production schedule during a production shift. In the third study, the research provides a methodology to help managers implement the IoT at the production system level; it includes an analysis of current energy management and production systems at the factory, and recommends procedures for implementing the IoT to collect and analyze energy data. The methodology has been validated by a pilot study, where energy KPIs have been used to evaluate energy efficiency. In the fourth study, the goal is to introduce a way to achieve multi-level awareness of the energy consumed during production processes. The proposed method enables discrete factories to specify energy consumption, CO2 emissions, and the cost of the energy consumed at operation, production and order levels, while considering energy sources and fluctuations in energy prices. The results show that energy-efficient production management practices and decisions can be enhanced and enabled by the IoT. With the outcomes of the thesis, energy managers can approach the IoT adoption in a benefit-driven way, by addressing energy management practices that are close to the maturity level of the factory, target, production type, etc. The thesis also shows that significant reductions in energy costs can be achieved by avoiding high-energy price periods in a day. Furthermore, the thesis determines the level of monitoring energy consumption (i.e., machine level), the interval time, and the level of energy data analysis, which are all important factors involved in finding opportunities to improve energy efficiency. Eventually, integrating real-time energy data with production data (when there are high levels of production process standardization data) is essential to enable factories to specify the amount and cost of energy consumed, as well as the CO2 emitted while producing a product, providing valuable information to decision makers at the factory level as well as to consumers and regulators.

Modelo multidimensional de los factores que afectan la interacción entre marketing y ventas en el lanzamiento de nuevos productos en Latino América

Esta tesis se centra en la identificación y análisis de los factores que pueden favorecer o actuar como barreras del éxito de la implementación de la innovación y las relaciones entre sí, desde el enfoque de la interface marketing-ventas. El trabajo empírico se enmarca en el vacío de investigación existente en el campo del proceso de lanzamiento de nuevos productos en los mercados donde operan subsidiarias de empresas multinacionales de consumo masivo (FMCG). Las empresas FMCG son altamente dependientes de la innovación como proceso clave determinante del crecimiento competitivo de mediano y largo plazo. En un contexto de acortamiento del ciclo de vida de los productos, como resultado del desarrollo tecnológico y científico que impactan en el comportamiento de los consumidores, las empresas invierten un mayor nivel de recursos en el desarrollo de nuevos productos, reingeniería y programas de innovación (Mundra, Gulati y Gupta, 2013). Sin embargo, a pesar del aumento en la inversión, las tasas de éxito de la innovación reportadas son inferiores al 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Aumentar las tasas de éxito de los proyectos de innovación es reconocida en la literatura como un elemento clave para la supervivencia y competitividad de las empresas, para ser superiores a su competencia y desarrollar nuevos modelos de negocios. A pesar de la existencia de estudios que intentan comprender el proceso de lanzamiento de nuevos productos, no se ha identificado un claro prototipo de gestión de la innovación (Gupta et al, 2007). Profundizando en los factores de éxito, los autores Keupp, Palmié y Gassman (2012) reconocen que la innovación exitosa no depende solamente de la estrategia de selección de los proyectos de innovación, sino también la forma en que los mismos son implementados (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). Al analizar la implementación de los proyectos de lanzamiento de nuevos productos al mercado, en empresas FMCG, dicho proceso es responsabilidad principalmente de las funciones de marketing y ventas a través de la comunicación con los consumidores y los clientes respectivamente (Ernst, Hoyer y Rubsaamen, 2010). Es decir que el éxito en la implementación de la innovación requiere la gestión efectiva de la relación inter-funcional entre marketing y ventas (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). A pesar de la importancia de la integración entre marketing y ventas en la conceptualización e implementación de la innovación, este tema no ha sido estudiado en profundidad (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). En las empresas multinacionales, está demostrado que el desempeño de las subsidiarias determinan el éxito competitivo de la empresa a nivel global. El desafío de dichas subsidiarias es conjugar el desarrollo global de innovación y comunicación con las características locales de comportamiento del consumidor y el mercado. Por lo tanto, esta investigación empírica responde a la pregunta académica y de gestión acerca de cómo mejorar las tasas de éxito de lanzamiento de nuevos productos al mercado en subsidiarias de empresas de consumo masivo, desde la perspectiva de la relación entre marketing y ventas. En particular analiza cómo afectan la formalización de los procesos y los mecanismos de comunicación a la confianza interpersonal y a la efectividad de la interface marketing-ventas y dichos factores a su vez sobre la planificación integrada de la implementación de la innovación. La determinación de los factores o ítems que conforman cada uno de los constructos del proceso de ejecución de la innovación, se llevó a cabo a partir de una revisión exhaustiva del estado del arte de la literatura sobre las interfaces funcionales y el proceso de innovación. Posteriormente, los ítems seleccionados (más de 50 en total) fueron validados por referentes de marketing y ventas de Argentina y Uruguay a través de entrevistas en profundidad. A partir de los factores identificados se construyeron dos modelos teóricos: • (1) relativo a la influencia de las dimensiones de confianza interpersonal sobre la efectividad de las uniones inter-funcionales y como los mecanismos organizacionales, tales como la frecuencia y la calidad de la comunicación entre las áreas, afectan la confianza y la relación entre ellas; • (2) relativo a la dimensión planificación integrada de la implementación de la innovación, ya que durante el lanzamiento de nuevos productos al mercado, marketing y ventas utilizan procesos formales que facilitan la comunicación frecuente y efectiva, desarrollando confianza inter-personal que no solamente afecta la efectividad de su relación sino también el desarrollo de planes integrados entre ambas áreas. El estudio fue llevado a cabo en una empresa multinacional de consumo masivo que integra la lista Global 500 (Fortune, 2015), presente en todo el mundo con más de 25 marcas participantes en más de 15 categorías, implementando 150 proyectos de innovación en el último año. El grupo de subsidiarias en estudio fue reconocido a nivel mundial por su desempeño en crecimiento competitivo y su alta contribución al crecimiento total. El modelo analizado en esta tesis fue expandido al resto de América Latina, tratándose entonces de un caso ejemplar que representa una práctica de excelencia en la implementación de la innovación en subsidiarias de una empresa multinacional. La recolección de los datos fue llevado a cabo a través de un cuestionario estructurado y confidencial, enviado a la base de datos de todo el universo de directores y gerentes de marketing y ventas. El nivel de respuesta fue muy elevado (70%), logrando 152 casos válidos. El análisis de datos comprendió el análisis descriptivo de los mismos, estimación de fiabilidad y análisis factorial exploratorio a través del software SPSS v.20. El análisis factorial confirmatorio y el análisis de senderos para examinar las relaciones entre los factores se estudiaron mediante el software R (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finalmente se llevaron a cabo entrevistas en profundidad a gerentes de marketing y ventas de cada uno de los seis países con el fin de profundizar en los constructos y sus relaciones. Los resultados de los modelos demuestran que la frecuencia de comunicación impacta positivamente en la calidad de la misma, que a su vez afecta directamente la relación entre marketing y ventas. Adicionalmente, la calidad de la comunicación impacta sobre la confianza cognitiva, que a su vez se relaciona no solamente con la confianza afectiva sino también con la relación entre ambas áreas. Esto significa que para mejorar la implementación de la innovación, los gerentes deberían orientarse a reforzar la relación entre marketing y ventas facilitando la construcción de confianza interpersonal primero cognitiva y luego afectiva, incrementando la frecuencia de la comunicación que alimenta la calidad de la comunicación entre ambas áreas. A través del segundo modelo se demuestra que durante el lanzamiento de nuevos productos al mercado, marketing y ventas necesitan emplear procesos formales que faciliten la comunicación frecuente y efectiva. De esta forma se contrarresta el efecto negativo de la formalización sobre la planificación integrada entre ambas áreas. Adicionalmente, los gerentes de ambos departamentos deberían promover la construcción de confianza interpersonal, no solamente para mejorar la efectividad de la relación, sino también para desarrollar planes integrados de implementación de nuevos productos. Finalmente, se valida que la frecuencia de la comunicación, la confianza afectiva y la relación marketing-ventas, se relacionan positivamente con la planificación integrada en la implementación de la innovación. El estudio contribuye a la comprensión de los factores que las empresas pueden emplear para mejorar la relación inter-funcional entre marketing y ventas y la implementación de la innovación en empresas de consumo masivo. El aporte de esta investigación puede ser valorado de dos maneras, los aportes a la gestión y a la academia. Desde el punto de vista empresarial, provee a los líderes al frente de empresas de consumo masivo, del conocimiento sobre los factores que afectan la implementación de la innovación y en definitiva el éxito del negocio a mediano y largo plazo. Desde el punto de vista académico aporta al conocimiento del proceso de implementación de la innovación y en la efectividad de la interface marketing y ventas en un caso de buenas prácticas en el mercado de consumo masivo. A su vez incorpora por primera vez un estudio empírico en geografías emergentes capaces de recuperar el camino de crecimiento posterior a una profunda crisis económica a través de la exitosa implementación de la innovación en sus mercados. ABSTRACT This thesis is focused on the identification, analysis and relationship study of factors which may benefit or hinder the successful deployment of innovation, from a marketing-sales interface perspective. Considering the non-existent investigation dedicated to the study of new products launches into markets in which Fast Moving Consumer Goods (FMCG) companies’ subsidiaries operate, it is that this investigation has been carried out. FMCG companies rely on innovation as their key process for a competitive growth on a medium and long term basis. Nowadays, the life-cycle of products is getting shorter as a result of new technological and scientific development, having impact on consumer behavior, and therefore companies are forced to dedicating more resources to the development of new products, reengineering and innovation programs (Mundra, Gulati and Gupta, 2013). However, in spite of the investment increase, the innovation success rates have been reported to be lower than 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Increasing success rates on innovation processes has been considered as a key element on the survival and competitiveness of companies, outperforming competitors and developing new business models. Despite new studies which try to comprehend the process of new products launch, a prototype of innovation management has not yet been identified (Gupta et al, 2007). Emphasizing on success factors, authors Keupp, Palmié and Gassman (2012) recognize that successful innovation does not solely depend on innovation processes’ selection strategy, but it is also based on the way in which these are implemented (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). While analyzing the implementation of projects for new products releases on massive consumption companies, the two departments in charge of taking this forward are marketing and sales, by focusing on communication strategies with consumers and clients respectively (Ernst, Hoyer y Rubsaamen, 2010). This means that having success on innovation implementation requires an effective management of inter-functional relationship among marketing and sales (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). In spite of the importance on the integration between marketing and sales on the conceptualization and implementation of innovation, this subject has not been studied in depth (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). In multinational companies, previous research has confirmed that the performance of their subsidiaries determine the competitive success of the company on a global scale. The challenge of said subsidiaries is to conjugate the global innovation development and communication with the local consumer and market behavior. Therefore, this empirical study aims to respond to the academic and management question of how to improve the success rates of new product launches into MNE subsidiary’ markets, from a marketing-sales relationship perspective. Particularly, this investigation analyses how the formalization of products and communication mechanisms affect interpersonal trust and marketing-sales interface effectiveness and also on how these factors affect the overall planning of the implementation of innovation. The determination of which factors build the hypothesis of the innovation execution process was taken forward through an extensive research on the extant literature on functional interfaces and innovation processes. More than 50 items were selected which were in turn validated by marketing and sales referents on Uruguay and Argentina through in depth interviews. Based on the identified factors, two theoretical models were proposed: (1) Relative to the influence that interpersonal trust dimensions have on inter functional linkages effectiveness and how organizational mechanisms such as frequency and quality of communication between departments affect trust and their relationship. (2) Relative to the integrated planning and innovation implementation dimensions. Marketing and sales department use formal process thus allowing inter-personal trust, which affects positively their relationship and also enables the development of integrated planning between them. The study was performed within a massive consumption company which is part of the “Global 500” (Fortune, 2015), with subsidiaries all over the world and more than 25 participant brands in 15 categories, having implemented over 150 innovation projects in the year under study. The analyzed subsidiary group has been awarded worldwide for their performance in competitive growth and their high contribution to the total growth. The model being analyzed in this thesis was implemented throughout Latin America, representing a remarkable case of innovation implementation excellence for subsidiaries of multinational companies. Data recollection was carried out through a structured and confidential questionnaire, sent to the universe of marketing-sales directors and managers’ database available with a high level of responsiveness of 70%, resulting in 152 valid cases. Data exploration involved a descriptive analysis, followed by a reliability estimation and an exploratory factorial analysis carried out through SPSS v.20. Confirmatory factorial analysis and path analysis (to examine relations between the different study factors) were studied using “R” software (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finally, in depth interviews were carried out to several marketing and sales managers in each of the six countries so as to further confirm the hypothesis and their relations. The models results prove that communication frequency has a positive impact on the quality of the same, which in turn has direct effects on the marketing-sales relations. Additionally, communication quality has an impact on the cognitive trust, which also relates not only to affective trust, but also to the relation between both areas. This means that in order to improve the implementation of innovation, managers should strive to enforce marketing-sales relations, facilitating the interpersonal trust construction (firstly cognitive, followed by affective trust), increasing the communication frequency, and therefore nurturing the communication quality among both areas. Through the second model, the results confirm the importance of creating effective relationships between sales and marketing to facilitate planning integrated new product implementations. While formalized new product development processes provide opportunities for sales and marketing to communicate, this does not directly influence the planning of integrated new product implementations. By using these formal opportunities to communicate to create information quality, it is possible to improve sales and marketing’s ability to integrate information during the planning process. Further, communication quality creates inter-personal trust in the other party’s competences (cognitive-based trust), leading to affect-based trust. Affect-based inter-personal trust, not only to improve the overall effectiveness of the sales and marketing relationship, but also helps in planning integrated new product implementations. This study contributes to the understanding of factors which enterprises can use to improve the inter-functional relations between marketing and sales, and the implementation of innovation in FMCG companies. The contribution of this investigation can be measured in two ways: enrichment of management and contribution to the academic area. From a business perspective, it provides massive consumption businesses leaders with knowledge on which factors affect innovation implementation, which results on mid and long-term success for the company. From an academic point of view, it provides knowledge on a prototype of successful innovation implementation management based on the marketing-sales interface effectiveness through a case study in the FMCG consumption market. Last but not least, it incorporates for the first time an empiric study on emerging geographies capable of recovery post a deep economic crisis through successful innovation implementation on their markets.

HUNT: launch of a full-length cDNA database from the Helix Research Institute

The Helix Research Institute (HRI) in Japan is releasing 4356 HUman Novel Transcripts and related information in the newly established HUNT database. The institute is a joint research project principally funded by the Japanese Ministry of International Trade and Industry, and the clones were sequenced in the governmental New Energy and Industrial Technology Development Organization (NEDO) Human cDNA Sequencing Project. The HUNT database contains an extensive amount of annotation from advanced analysis and represents an essential bioinformatics contribution towards understanding of the gene function. The HRI human cDNA clones were obtained from full-length enriched cDNA libraries constructed with the oligo-capping method and have resulted in novel full-length cDNA sequences. A large fraction has little similarity to any proteins of known function and to obtain clues about possible function we have developed original analysis procedures. Any putative function deduced here can be validated or refuted by complementary analysis results. The user can also extract information from specific categories like PROSITE patterns, PFAM domains, PSORT localization, transmembrane helices and clones with GENIUS structure assignments. The HUNT database can be accessed at http://www.hri.co.jp/HUNT.

Should energy efficiency be traded off for other product attributes? : an analysis of air-conditioner regulation in Japan

This paper examines the functioning of energy efficiency standards and labeling policies for air conditioners in Japan. The results of our empirical analysis suggest that consumers respond more to label information, which benchmarks the energy efficiency performance of each product to a pre-specified target, than to direct performance measures. This finding provides justification for the setting, and regular updating, of target standards as well as their use in calculating relative performance measures. We also find, through graphical analysis, that air conditioner manufacturers face a tradeoff between energy efficiency and product compactness when they develop their products. This tradeoff, combined with the semi-regular upward revision of minimum energy efficiency standards, has led to the growth in indoor unit size of air conditioners in recent years. In the face of this phenomenon, regulatory rules were revised so that manufacturers could adhere to less stringent standards if the indoor unit size of their product remains below a certain size. Our demand estimates provide no evidence that larger indoor unit size causes disutility to consumers. It is therefore possible that the regulatory change was not warranted from a consumer welfare point of view.

International technology transfer and collaborative new product development:evidence and a case from the machine tool industry

In recent years, it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper, the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The paper outlines the links between the operational aspects of collaborations and their strategic objectives. It is based on empirical data collected from the machine tool industries in the UK and China. The evidence includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of BSA Tools Ltd and its Chinese partner the Changcheng Machine Tool Works is used to provide an in-depth example of the operational development of a successful collaboration. The paper concludes that a phased coordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work.

Modeling equity market integration using smooth transition analysis:a study of Eastern European stock markets

This paper assesses the extent to which the equity markets of Hungary, Poland the Czech Republic and Russia have become less segmented. Using a variety of tests it is shown there has been a consistent increase in the co-movement of some Eastern European markets and developed markets. Using the variance decompositions from a vector autoregressive representation of returns it is shown that for Poland and Hungary global factors are having an increasing influence on equity returns, suggestive of increased equity market integration. In this paper we model a system of bivariate equity market correlations as a smooth transition logistic trend model in order to establish how rapidly the countries of Eastern Europe are moving away from market segmentation. We find that Hungary is the country which is becoming integrated the most quickly. © 2005 ELsevier Ltd. All rights reserved.

Marking high-technology market evolution through the foci of market stories:the case of local area networks

Previous research suggests that changing consumer and producer knowledge structures play a role in market evolution and that the sociocognitive processes of product markets are revealed in the sensemaking stories of market actors that are rebroadcasted in commercial publications. In this article, the authors lend further support to the story-based nature of market sensemaking and the use of the sociocognitive approach in explaining the evolution of high-technology markets. They examine the content (i.e., subject matter or topic) and volume (i.e., the number) of market stories and the extent to which content and volume of market stories evolve as a technology emerges. Data were obtained from a content analysis of 10,412 article abstracts, published in key trade journals, pertaining to Local Area Network (LAN) technologies and spanning the period 1981 to 2000. Hypotheses concerning the evolving nature (content and volume) of market stories in technology evolution are tested. The analysis identified four categories of market stories - technical, product availability, product adoption, and product discontinuation. The findings show that the emerging technology passes initially through a 'technical-intensive' phase whereby technology related stories dominate, through a 'supply-push' phase, in which stories presenting products embracing the technology tend to exceed technical stories while there is a rise in the number of product adoption reference stories, to a 'product-focus' phase, with stories predominantly focusing on product availability. Overall story volume declines when a technology matures as the need for sensemaking reduces. When stories about product discontinuation surface, these signal the decline of current technology. New technologies that fail to maintain the 'product-focus' stage also reflect limited market acceptance. The article also discusses the theoretical and managerial implications of the study's findings. © 2002 Elsevier Science Inc. All rights reserved.

Employment outcomes and plant closure in a post-industrial city:an analysis of the labour market studies of MG Rover workers three years on

This paper examines how the loss of 6300 jobs from the closure of MG Rover (MGR) in the city of Birmingham (UK) in April 2005 affected the employment trajectories of ex-workers, in the context of wider structural change and efforts at urban renewal. The paper presents an analysis of a longitudinal survey of 300 ex-MGR workers, and examines to what extent the state of local labour markets and workers’ geographical mobility—as well as the effectiveness of the immediate policy response and longer-term local economic strategies—may have helped to balance the impacts of personal attributes associated with workers’ employability and their reabsorption into the labour markets. It is found that the relative buoyancy of the local economy, the success of longer-run efforts at diversification and a strong policy response and retraining initiative helped many disadvantaged workers to find new jobs in the medium term. However, the paper also highlights the unequal employment outcomes and trajectories that many lesser-skilled workers faced. It explores the policy issues arising from such closures and their aftermath, such as the need to co-ordinate responses, to retain institutional capacity, to offer high-quality training and education resources to workers and, where possible, to slow down such closure processes to enable skills to be retained and reused within the local economy.

International technology collaboration for new product development

In recent years it has become increasingly common for companies to improve their competitiveness and find new markets by extending their operations through international new product development collaborations involving technology transfer. Technology development, cost reduction and market penetration are seen as the foci in such collaborative operations with the aim being to improve the competitive position of both partners. In this paper the case of technology transfer through collaborative new product development in the machine tool sector is used to provide a typical example of such partnerships. The research evidence on which the paper is based includes longitudinal case studies and questionnaire surveys of machine tool manufacturers in both countries. The specific case of a UK machine tool company and its Chinese partner is used to provide a specific example of the operational development of a successful collaboration. The paper concludes that a phased co-ordination of commercial, technical and strategic interactions between the two partners is essential for such collaborations to work. In particular, the need to transfer marketing know-how is emphasised, having been identified as an area of weakness among technology acquirers in China.

Valuing transferred machine tool technology:Relating value to product attributes and preferences of acquirers

The value of technology and the appropriate form of transfer arrangement are important questions to be resolved when transferring technology between Western manufacturing firms and partners in industrialising and developing countries. This article reports on surveys carried out in the machine tool industries in the UK and China to establish the differences and similarities between owners and acquirers of technology regarding the relative importance of the factors they evaluate, and the assessments they make, when considering a technology transfer. It also outlines the development of a framework for technology valuation. The survey results indicate that the value of product technology is related to superior technical performance, especially on reliability and functionality, and the prospects of premium prices and increased sales of the technology transfer based machine tools. Access to markets is the main objective of UK companies, while Chinese companies are concerned about improving their technological capability. There are significant risks, especially related to performance in the market, and while owners and acquirers have benefited in the short term, the long term collaboration required for strategic benefits has been difficult to achieve because of the different priorities of the owners and the acquirers.