Thick braneworlds and the Gibbons-Kallosh-Linde no-go theorem in the Gauss-Bonnet framework

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Otimização de procedimento para a determinação de maganês em amplo intervalo de concentração por espectrometria de absorção atômica em chama com fonte contínua e alta resolução

This work describes instrumental strategies for the determination of Mn in a wide range concentration by high-resolution continuum source flame atomic absorption spectrometry technique (HR-CS F AAS) by means of different atomic lines (primary at 279.482 nm, secondary at 403.075 nm and alternative at 209.250 nm). These lines provided complementary concentration intervals, and large sample dilutions became unnecessary. The proposed method was applied to tap water, metal alloy certified material and foliar fertilizer. Accuracy for secondary line were evaluated by tests of significance (t Student test) with reference materials from the Institute of Technological Research of São Paulo, and the results were in agreement at the 95% confidence level. For primary and alternative lines, recovery is were in the 84-116% range and the RSD were 6.1% for all wavelengths. Analytical curves in the 0.1 - 2.0 mg L-1 (279.482 nm), 2.0 - 25 mg L-1 (403.075 nm), 25 - 500 mg L-1 (209.250 nm) intervals were obtained with linear correlation coefficient better than 0.9991. The detection limits were 3.3x10-3 mg L-1 (279.482 nm), 7.4 x 10-3 mg L-1 (403.075 nm), 3.9 mg L- 1 (209.250 nm). The found Mn concentrations were < 3.3x10-3 mg L-1 (tap water), 1.00 ± 0.04 (% m/m) (alloy IPT 25), 7235 ± 175 mg L-1 (foliar fertilizer 1), 4990 ± 132 mg L-1 (foliar fertilizer 2). A method was developed to detect interference of Fe in the Mn primary line (279.482 nm) using the ratio of absorbances of other lines of the triplet (279.827 nm and 280,108 nm).

Comportamento de genótipos de cana-deaçúcar com irrigação de salvamento em Goianésia-GO

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Análise histológica e imunoistoquímica do tecido pulpar de ratos Wistar submetidos a procedimento clareador com duas concentrações de peróxido de hidrogênio

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise retrospectiva da implantação do serviço de inspeção municipal de Rio Verde – GO e de microrganismos patogenicos em produtos cárneos

Pós-graduação em Medicina Veterinária - FCAV

Geoquímica e geocronologia U-Pb e ­Sm-Nd dos ortognaisses da região de Pontalina (GO), Brasil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Go/N ratio in tropical soils from Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

As estratégias de reprodução social dos agricultores familiares das comunidades rurais do município de Catalão (GO)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diagnóstico de situação epidemiológica da Leishmaniose visceral canina em Rio Verde-GO

Pós-graduação em Medicina Veterinária - FCAV

Glitch Art: uso do erro digital como procedimento artístico e possibilidade estética

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Diagnóstico de situação da produção de linguiça frescal suína no município de Rio Verde/GO

Pós-graduação em Medicina Veterinária - FCAV

A plagiotropia como procedimento de estudo relacional da criação, crítica e método de tradução de Haroldo de Campos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização petrográfica estrutural e metamorfica das rochas da região de Indiara (GO)

The region Indiara (GO) is located in southwestern of São Francisco Craton in the Internal Zone of the Brasília Belt, western part of the Tocantins Province. In this locality outcrop rocks of the Goiás Magmatic Arc. These rocks are muscovite gneiss with biotite, muscovite-biotite gneiss, biotite gneiss with muscovite and garnet, biotite-muscovite gneiss, muscovite porfiroclastic gneiss, biotite porfiroclastic gneiss, muscovite-quartz schists, garnetquartz schists, and metamafic rock (hornblende schists) as metric or kilometric lenses. The gneisses have granodioritic composition, granoblastic texture, with some portions with lepidoblastic texture, constituting a discontinuous centimeter to millimeter banding; the structure is anisotropic, marked by the preferred orientation of all the minerals. These gneisses are leucocratic, generally are inequigranular and fine to medium grained. The hornblende schists have nematoblastic texture, are inequigranular and fine to medium grained and have anisotropic structure that is given by a foliation, marked by a strong preferential orientation of the crystals of amphibole and other minerals present in the rock. The gneisses of the area are composed of plagioclase (oligoclase/andesine), quartz, microcline, muscovite, biotite, epidote, apatite, zircon, garnet, kyanite, oxides and hydroxides of iron and opaque minerals. And the metamafic rocks of Indiara region are composed mainly of amphibole, plagioclase (oligoclase/andesine), quartz, titanite, biotite, allanite, garnet, oxides and hydroxides of iron, apatite, epidote, rutile, muscovite and opaque minerals. At least three phases of deformation were observed in the rocks of area of study (Dn-1, Dn and Dn +1). The Dn phase and represented by a well-marked foliation Sn having low dip angle (average dip of 20 °) and dip direction to SW (210/21) and to NE (18/20); the Dn-1 phase is represented by a compositional banding (Sn- 1), this banding is generally...

Tipo de cimentação em materiais duros do perfil de alteração da mina de fosfato da Anglo American, Catalão-GO

One of the main challenges in the mining sector at present, related to the optimization of mineral assets, consists in to find the best proportion of each geological material to be mined and homogenized to ensure high productivity and stability in ore processing plants. The stability of a mineral processing plant is factor for achieving operational excellence, as a stable performance of the plants ensures economy and adherence to financial planning businesses. Is already well Know that the feed rate of the processing plants is dependent on the hardness and quality of the ore. Therefore, the ore behavior predictability is the solution to ensure the stability of mineral processing plants. This work was developed in Anglo American Phosphate Brazil Ltda., at the Fazenda Chapadão Phosphate Mine, located in the southeastern portion of the state of Goiás, in the municipalities of Catalão and Ouvidor. The phosphate ore is the result of supergene apatite concentration in the weathering profile of the alkaline ultramafic phlogopitized rocks, intruded by foscoritic and carbonatitic rocks series. The weathering profile has about 100 meters thick and is divided into three basic types, from top to bottom, coinciding with decreasing intensity of weathering: oxidized ore, micaceous ore and weathered rock. In each portion of this weathering profile, mainly near the contacts between these three divisions, are hard materials, cemented by minerals such as apatite, quartz, goethite, monazite and barite. The different features presented by these materials makes to be vital the correct identification, quantification and location of different hard materials in the mine area, to maximize its use. The main objective of this study was to define the type of cementation of hard materials which predominates in each portion of the weathering profile in the mine, as well as their relationship with the protolith. The work involved geological mapping, channel sampling...

Construção de índice percentual de “status” de desenvolvimento sus-tentável de assentamentos rurais utilizando procedimento estatísti-co multivariado

The objective of the present work is the construction of percentual indexes of sustainable development "Status" - PIDSD (%) aiming to order and classify the rural settlements, considering agricultural, socioeconomic and environmental aspects, in order to diagnose their sustainable reality. This way, we considered multivariate statistical procedure to establish analytical descriptors - indexes - like the principal components technique (CP). The CP technique was used in a matrix formed by 47 variables observed in 50 rural settlements, distributed in seven different regions of the state of Mato Grosso, obtained from diagnostics, provided by "Mato-Grossense" Enterprise of Research, Assistance and Rural Extension S/A - EMPAER - MT, in order to obtain the indexes used in the construction of PIDSD (%). The settlements with higher PIDSD (%) were considered "higher potential" or "higher sustainable" in relation to the analyzed variables, making the establishment of assistance strategies and cooperation possible, allowing the government and civil society in general, to improve those with worse results ("lower potential" or "lower sustainable"), and search for ways to strengthen and multiply the results of the "higher potential" settlements. Vale do Seringal settlement had the best conditions in relation to the variables, mainly those of higher weigh and was considered the one with "higher potential". São Sebastião had the worst conditions and was considered "lower potential".