Investigation of Highway Lighting, HR-154, 1976

The Iowa State Highway Commission initiated this research to evaluate a new lowering device for tower luminaires and a new concept of tower luminaire light distribution. Lighting at the West interchange of I-80, I-35, and I-235 in Polk County was also designated as an FHWA experimental project. As highway lighting has become more widely used, highway officials recognized the increasing importance of reducing safety hazards and improving aesthetic appearance of lighting installations. Also, lighting construction, energy, and maintenance costs were absorbing a larger share of the maintenance budget. A search began for a method of lighting whereby the fixed objects by the roadside could be eliminated or reduced in number, the costs could be reduced and the quality of lighting improved over existing methods. Lack of design data in this area illustrated the need for research.

Field Instrumentation, Testing, and Long-Term Monitoring of High-Mast Lighting Towers in the State of Iowa, TR-518, 2006

As a result of the collapse of a 140 foot high-mast lighting tower in Sioux City, Iowa in November of 2003, a thorough investigation into the behavior and design of these tall, yet relatively flexible structures was undertaken. Extensive work regarding the root cause of this failure was carried out by Robert Dexter of The University of Minnesota. Furthermore, a statewide inspection of all the high-mast towers in Iowa revealed fatigue cracks and loose anchor bolts on other existing structures. The current study was proposed to examine the static and dynamic behavior of a variety of towers in the State of Iowa utilizing field testing, specifically long-term monitoring and load testing. This report presents the results and conclusions from this project. The field work for this project was divided into two phases. Phase 1 of the project was conducted in October 2004 and focused on the dynamic properties of ten different towers in Clear Lake, Ames, and Des Moines, Iowa. Of those ten, two were also instrumented to obtain stress distributions at various details and were included in a 12 month long-term monitoring study. Phase 2 of this investigation was conducted in May of 2005, in Sioux City, Iowa, and focused on determining the static and dynamic behavior of a tower similar to the one that collapsed in November 2003. Identical tests were performed on a similar tower which was retrofitted with a more substantial replacement bottom section in order to assess the effect of the retrofit. A third tower with different details was dynamically load tested to determine its dynamic characteristics, similar to the Phase 1 testing. Based on the dynamic load tests, the modal frequencies of the towers fall within the same range. Also, the damping ratios are significantly lower in the higher modes than the values suggested in the AASHTO and CAN/CSA specifications. The comparatively higher damping ratios in the first mode may be due to aerodynamic damping. These low damping ratios in combination with poor fatigue details contribute to the accumulation of a large number of damage-causing cycles. As predicted, the stresses in the original Sioux City tower are much greater than the stresses in the retrofitted towers at Sioux City. Additionally, it was found that poor installation practices which often lead to loose anchor bolts and out-of-level leveling nuts can cause high localized stresses in the towers, which can accelerate fatigue damage.

Holographic collisions in confining theories

We study the gravitational dual of a high-energy collision in a confining gauge theory. We consider a linearized approach in which two point particles traveling in an AdS-soliton background suddenly collide to form an object at rest (presumably a black hole for large enough center-of-mass energies). The resulting radiation exhibits the features expected in a theory with a mass gap: late-time power law tails of the form t −3/2, the failure of Huygens" principle and distortion of the wave pattern as it propagates. The energy spectrum is exponentially suppressed for frequencies smaller than the gauge theory mass gap. Consequently, we observe no memory effect in the gravitational waveforms. At larger frequencies the spectrum has an upward-stairway structure, which corresponds to the excitation of the tower of massive states in the confining gauge theory. We discuss the importance of phenomenological cutoffs to regularize the divergent spectrum, and the aspects of the full non-linear collision that are expected to be captured by our approach.

Low-cost MR-compatible moving heart phantom.

For the development and evaluation of cardiac magnetic resonance (MR) imaging sequences and methodologies, the availability of a periodically moving phantom to model respiratory and cardiac motion would be of substantial benefit. Given the specific physical boundary conditions in an MR environment, the choice of materials and power source of such phantoms is heavily restricted. Sophisticated commercial solutions are available; however, they are often relatively costly and user-specific modifications may not easily be implemented. We therefore sought to construct a low-cost MR-compatible motion phantom that could be easily reproduced and had design flexibility. A commercially available K'NEX construction set (Hyper Space Training Tower, K'NEX Industries, Inc., Hatfield, PA) was used to construct a periodically moving phantom head. The phantom head performs a translation with a superimposed rotation, driven by a motor over a 2-m rigid rod. To synchronize the MR data acquisition with phantom motion (without introducing radiofrequency-related image artifacts), a fiberoptic control unit generates periodic trigger pulses synchronized to the phantom motion. Total material costs of the phantom are US$ < 200.00, and a total of 80 man-hours were required to design and construct the original phantom. With schematics of the present solution, the phantom reproduction may be achieved in approximately 15 man-hours. The presented MR-compatible periodically moving phantom can easily be reproduced, and user-specific modifications may be implemented. Such an approach allows a detailed investigation of motion-related phenomena in MR images.

Individual differences in control of language interference in late bilinguals are mainly related to general executive abilities

Background: Recent research based on comparisons between bilinguals and monolinguals postulates that bilingualism enhances cognitive control functions, because the parallel activation of languages necessitates control of interference. In a novel approach we investigated two groups of bilinguals, distinguished by their susceptibility to cross-language interference, asking whether bilinguals with strong language control abilities ('non-switchers") have an advantage in executive functions (inhibition of irrelevant information, problem solving, planning efficiency, generative fluency and self-monitoring) compared to those bilinguals showing weaker language control abilities ('switchers"). Methods: 29 late bilinguals (21 women) were evaluated using various cognitive control neuropsychological tests [e.g., Tower of Hanoi, Ruff Figural Fluency Task, Divided Attention, Go/noGo] tapping executive functions as well as four subtests of the Wechsler Adult Intelligence Scale. The analysis involved t-tests (two independent samples). Non-switchers (n = 16) were distinguished from switchers (n = 13) by their performance observed in a bilingual picture-naming task. Results: The non-switcher group demonstrated a better performance on the Tower of Hanoi and Ruff Figural Fluency task, faster reaction time in a Go/noGo and Divided Attention task, and produced significantly fewer errors in the Tower of Hanoi, Go/noGo, and Divided Attention tasks when compared to the switchers. Non-switchers performed significantly better on two verbal subtests of the Wechsler Adult Intelligence Scale (Information and Similarity), but not on the Performance subtests (Picture Completion, Block Design). Conclusions: The present results suggest that bilinguals with stronger language control have indeed a cognitive advantage in the administered tests involving executive functions, in particular inhibition, self-monitoring, problem solving, and generative fluency, and in two of the intelligence tests. What remains unclear is the direction of the relationship between executive functions and language control abilities.

Typpeä sisältävien jätevesien käsittely 2-n-PRO menetelmällä

Työssä tutkittiin kaksivaiheisen typenpoistoprosessin (2-N-PRO) soveltuvuutta Joutsenon Kukkuroinmäen aluejätekeskuksen kompostointilaitoksen jätevesille pilot-kokein 12.1.- 5.4.2006. Kompostilaitoksella on jätevesien esikäsittelytarve korkeista ammoniumtyppipitoisuuksista johtuen. Pilot-laitteisto koostuu sekoitussäiliöstä, strippaustornista ja katalyyttipolttimesta. Käsiteltävän jäteveden pH nostetaan korkealle tasolle, jolloin ammoniumtyppi muuttuu ammoniakiksi. Vesi johdetaan strippaustorniin, jossa se sadetetaan tornin pohjalle. Ammoniakki erottuu sadetuksessa ilmaan, joka imetään katalyyttipolttimelle. Katalyyttinen poltin käsittelee ammoniakkia typpikaasuksi. Pilot-kokeet suoritettiin jatkuvatoimisesti. Laitteisto pystyy erottamaan jätevedestä ammoniumtyppeä ammoniakiksi ja käsittelemään ammoniakin pääosin typpikaasuksi. Lisäksi suoritettiin panoskoe, jonka tulokset tukevat jatkuvatoimisesta käytöstä saatuja tuloksia.

Anaerobic treatment of deinking pulp plant effluents

Anaerobic treatment as a first biological stage in wastewater treatment is nowadays a well-established technology in recycled paper processing mills using closed water circuits. Today further developed high-rate processes and especially high-tower reactors are also able to handle lower organic loads and become therefore feasible for deinking pulp plant effluents. The interest in the anaerobic method is based on a positive energy balance in form of biogas production and low biomass yield from the process. The anaerobic treatment method was researched and its suitability for the deinking pulp plant effluents was tested experimentally at Stora Enso Maxau mill. In the theory, the deinking pulp process is introduced and the effluents from the deinking process are characterized. The anaerobic treatment is brought up in depth in terms of its use for the deinking effluents, and different kind of reactor types are presented. In addition, other wastewater treatment methods are shortly introduced with the focus on tertiary treatment. Static biodegradability tests were carried out for the wastewaters both anaerobically and aerobically. Based on the results, the deinking effluents can be degraded anaerobically, and inhibition to the methanogenic bacteria was not noticed. In the aerobic static test a good performance of the existing wastewater treatment plant at Maxau mill was proved. Later on pilot trials with sequential anaerobic-aerobic treatment were carried out for the deinking effluents. The anaerobic reactor used was a so called internal circulation reactor. The results confirmed that the combination of the anaerobic treatment and the aerobic activated sludge process is a suitable method for deinking wastewaters with a COD reduction as good as with a two stage aerobic method. When combined with the outstanding quality of the produced biogas and the cost savings acquired from the lower sludge production, the anaerobic treatment was found to be an especially favorable treatment method.

Korkeavaaleuksisen PGW-massan valmistaminen

Työssä haettiin optimaalista valkaisukemikaalien annostelusuhdetta mahdollisimman vaalean massan valmistamiseksi. Tarkoituksena oli myös selvittää käytettävän tehdasprosessin pullonkauloja ja esittää vaihtoehtoja prosessin kehittämiseksi. Kirjallisuusosassa tutustuttiin mekaanisen massan peroksidivalkaisuun ja erilaisiin prosessimalleihin sen suorittamiseksi. Kirjallisuudesta saatuja lähtötietoja sovellettiin sitten ensin laboratorio- ja laajemmin tehdaskokein käytäntöön. Laboratoriokokeissa haettiin optimaalista lipeäannosta vakioperoksidiannoksella. Lisäksi selvitettiin lämpötilan ja viipymäajan vaikutusta valkaisutulokseen. Tuloksista oli todettavissa, että sekä lämpötilan että lipeäannoksen kasvattaminen kiihdyttää valkaisureaktiota. Korkeammassa lämpötilassa tarvittava lipeäannos on pienempi. Lyhyellä viipymäajalla ja matalammalla lämpötilalla saavutetaan hyviä tuloksia vain suurella lipeäannoksella. Suurempaa silikaattiannosta käytettäessä valkaisun jälkeen mitattu loppupH oli korkeampi ja jäännösperoksidin määrä hieman suurempi kuin referenssipisteessä. Vaaleudessa ei merkittävää muutosta näkynyt. Yleisesti laboratoriokokeiden tulokset vastasivat kirjallisuudessa esitettyjä tuloksia. Tehdaskokeet suoritettiin kahdella peroksidiannoksella. Kummallekin peroksidiannokselle haettiin optimaalinen lipeäannos. Lisäksi seurattiin silikaattiannoksen vaikutusta syntyvään vaaleuteen. Varsinaisten kokeiden lisäksi suoritettiin lyhyt maksimivaaleuskoe suurella peroksidiannoksella käyttäen kahta eri lipeäannosta. Suurin mitattu vaaleus oli 79,3 % ISO. Peroksidiannoksella 2,5 % saavutettiin noin 14 ISO-yksikön vaaleudennousu, ja annoksella 3 % vaaleudennousu oli noin 16 yksikköä. Tehdaskokeiden aikana kokeiltiin myös kemikaalien laimennusveden määrän vaikutusta vaaleuteen. Veden määrän vähetessä valkaisusakeus nousi ja vaaleus parani. Hiomon nykyprosessille laadittiin aine- ja energiatase. Taseet tehtiin myös prosessille, jossa nykyvalkaisimoon on lisätty valkaistun massan pesu ja jäännöskemikaalien kierrätys. Taseiden tarkoituksena oli selvittää virtaavien jakeiden määriä ja prosessin energiatasapainoa eri tilanteissa. Massan puhtauden paranemista pesun aikana tarkasteltiin laskennallisesti. Tämän työn aikana kävi selväksi, että oikeilla valkaisukemikaalisuhteilla pystytään valmistamaan vaaleaa massaa. Viipymäaikaa lisäämällä valkaisuun saisi lisää tehoa, mutta vain tunnin viipymäajalla päästään jo hyviin tuloksiin. Vaaleusheittoja aiheuttavat valkaistavan massan lähtövaaleuden, sakeuden ja lämpötilan muutokset. Lisäksi viipymäajan muutokset aiheuttavat huojuntaa saavutettavaan loppuvaaleuteen.

Ristikkotorniprojektin jälkiseuranta sekä valmistus-, kuljetus- ja asennusnäkökohdat massiivisen tornin suunnittelussa

Tässä työssä tutkittiin jälkiseurantana putkipalkkirakenteisen ristikkotornin rakennusprojektia. Tutkimuksen kohteena oli suomalaiselle öljynjalostamolle vuonna 1992 rakennettu vapaastiseisova 105 m korkea soihtutorni. Työn tarkoituksena oli tutkia teräsrakennekokonaisuutta toisaalta suunnittelun ja lujuuslaskennan, toisaalta valmistuksen, kuljetuksen ja asennuksen kannalta. Lisäksi työssä etsittiin soihtutornin vaihtoehtoisia rakenneratkaisuja. Esisuunnittelun tuloksena syntyneitä rakenteita verrattiin vuonna 1992 toteutettuun rakenteeseen. Toteutetun ristikkomaston lujuusominaisuuksia arvioitiin käymällä läpi tehdyt lujuuslaskelmat ja selvittämällä mm. rakenteen eri kohdista mitoituksen tasaisuus. Havaittiin, että rakenteen lujuuden käyttöaste vaihteli 0,7:n ja 0,9:n välillä 72 m:n korkeuteen asti. Tästä ylöspäin käyttöasteet olivat pienempiä. Konepajavalmistuksen, kuljetusten ja asennustöiden onnistumista tutkittiin haastattelemalla sekä konepajan että tilaajan edustajia. Ylöspäin kapeneva rakenne osoittautui lujuusopillisesti järkeväksi, mutta valmistusteknisesti vanhanaikaiseksi. Massiivisten ristikkotornien kuljetus- ja nostomahdollisuuksia tutkittiin selvittämällä lainsäädännön asettamat rajoitukset ja käsikirjojen antamat ohjeet. Lisäksi haastateltiin erikoiskuljetuksia ja -nostoja suorittavan yrityksen edustajaa. Uusien rakenneratkaisujen suunnittelussa korostettiin pitkälle vietyä osavalmistusta sekä kuljetus- ja nostomahdollisuuksia. Uusista tornivaihtoehdoista tutkittiin tarkemmin massiivisista pyöreistä putkipalkeista tehty torni, joka on rakenteeltaan Vierendeel-kehän sovellutus. Rakenne on 62 % painavampi kuin vuonna 1992 toteutettu soihtutorni, mutta silti 9 % halvempi. Uuden rakenteen valmistusystävällisyys on merkittävästi parempi kuin vanhan.

Aluminium fouling and its impact on activated carbon based dioxin and furan removal in a wet scrubber at a co-incineration plant

Dioxins and furans, PCDD/Fs, are highly toxic substances formed in post combustion zones in furnaces. PCDD/F emissions are regulated by a waste incineration directive which relates also to co-incineration plants. Several observations of dioxin and furan enhancements in wet scrub- bers have been reported previously. This is thought to be due to the so-called "memory effect" which occurs when dioxins and furans absorb into plastic material in scrubbers and desorb when ambient circumstances alter significantly. At the co-incineration plant involved, dioxins and furans are controlled with a wet scrubber, the tower packing of which is made of plastic in which activated carbon particles are dispersed. This should avoid the memory effect and act as a dioxin and furan sink since dioxins and furans are absorbed irreversibly into the packing ma- terial. In this case, the tower packing in the scrubber is covered with a white layer that has been found to be mainly aluminium. The aim of this thesis was to determine the aluminium balance and the dioxin and furan behaviour in the scrubber and, thus, the impacts that the foul- ing has on dioxin and furan removal. The source of aluminium, reasons for fouling and further actions to minimize its impacts on dioxin and furan removal were also to be discovered. Measurements in various media around the scrubber and in fuels were made and a profile analysis of PCDD/F and mass balance calculations were carried out. PCDD/F content de- creased in the scrubber. The reduced PCDD/F was not discharged into scrubbing water. The removal mechanism seems to work in spite of the fouling, at least with low PCDD/F loads. Most of the PCDD/F in excess water originates from the Kymijoki River which is used as feeding water in the scrubber. Fouling turned out to consist mainly of aluminium hydroxides. Sludge combusted in the furnace was found to be a significant source of aluminium. Ways to minimize the fouling would be adjustment of pH to a proper lever, installation of a mechanical filter to catch the loose material from the scrubbing water and affecting the aluminium content of the sludge.

Titaanisen valkaisutornin korjaussuunnitelma

Tämän työn tarkoituksena on poistaa toistuvasti esiintyneet vauriot titaanisessa valkaisutornissa Kuusankosken paperitehtailla. Vauriot esiintyivät melko pian käyttöönoton jälkeen ja niitä esiintyi toistuvasti jokaisen korjauksen jälkeen. Jatkuvatoimisen prosessin vuoksi käyttökatkokset eivät olleet suotavia. Aikataulu suunnittelulle ja korjaukselle oli erittäin tiukka, jolloin kenttämittauksia ei ollut mahdollista tehdä laskelmien tueksi. Tämän vuoksi tähän työtön parhaiten soveltuvaksi menetelmäksi valittiin FEA. Alkuperäisessä rakenteessa pääsäiliöön oli hitsattu pintatasku, jota käytettiin välisäiliönä varastoimaan suuri määrä vaarallista nestettä. Tämä aiheutti valkaisutornin vaipalle murtumia ja vuotoja sekä suuronnettomuuden riskin koko valkaisutornille. Kuormitustietojen puutteesta johtuen kuormitukset mallinnettiin virtuaalisesti FE-menetelmällä ja analyyttisin keinoin. Kuormitusten suuruudet arvioitiin konservatiivisesti. Tämän työn tärkein oivallus oli määritellä uudelleen pintataskun toiminto siten, että sitä ei enää käytetty nesteen välivarastona, vaan ohjaimena nesteelle. Tämä innovatiivinen ongelmankorjauskonsepti on havaittu onnistuneeksi, koska vaurioita ei ole enää esiintynyt viimeisimmän korjauksen jälkeen.

Proyecto de una Torre Grúa. Normas de seguridad y salud laboral

This project is a tool for engineers and technicians in the development and knowledge of the most important construction equipment, tower crane. It consists of a memory, 10 annexes and an Excel spreadsheet to do the calculations automatically . Some of these annexes are: Annex 1. Types of cranes and elements of them. Annex 2. Mounting and dismounting. Annex 3. Useful clamping loads. Annex 4. Safety systems , etc. Every single annex separately, provides detailed explanations , both written and visual of problems and solutions in the world of tower cranes . Professionals are able to learn in an orderly way, definitions, developments, calculations, processes etc., Which will greatly easy people's job in the construction and in the writing of a project. Also a spreadsheet with the Excel program has been made to help engineers on calculations. This sheet is protected and it can be accesed only to enter the data needed to perform the calculations of the safety factor and weight of shoes . The results will tell us if there is a risk of tipping of the tower crane and the weight of shoes. This tool will greatly help engineers on their calculations. All documentation is based on laws, regulations and no legal rules status, they guarantee that we are always within the Spanish and legislative Autonomous framework. This fact makes the professional carries out a project to a successful future and a legalistic view. Also note that these rules are in constant change, which makes it necessary for the professional to always be in a constant revision of the legislation.

Effect of tow-drop gaps on the damage resistance and tolerance of Variable-Stiffness Panels

This paper presents an experimental study of the effects of tow-drop gaps in Variable Stiffness Panels under drop-weight impact events. Two different configurations, with and without ply-staggering, have been manufactured by Automated Fibre Placement and compared with their baseline counterpart without defects. For the study of damage resistance, three levels of low velocity impact energy are generated with a drop-weight tower. The damage area is analysed by means of ultrasonic inspection. Results of the analysed defect configurations indicate that the influence of gap defects is only relevant under small impact energy values. However, in the case of damage tolerance, the residual compressive strength after impact does not present significant differences to that of conventional straight fibre laminates. This indicates that the strength reduction is driven mainly by the damage caused by the impact event rather than by the influence of manufacturing-induced defects

Computing the persistent homology of range images with alpha shapes

Laser scanning is becoming an increasingly popular method for measuring 3D objects in industrial design. Laser scanners produce a cloud of 3D points. For CAD software to be able to use such data, however, this point cloud needs to be turned into a vector format. A popular way to do this is to triangulate the assumed surface of the point cloud using alpha shapes. Alpha shapes start from the convex hull of the point cloud and gradually refine it towards the true surface of the object. Often it is nontrivial to decide when to stop this refinement. One criterion for this is to do so when the homology of the object stops changing. This is known as the persistent homology of the object. The goal of this thesis is to develop a way to compute the homology of a given point cloud when processed with alpha shapes, and to infer from it when the persistent homology has been achieved. Practically, the computation of such a characteristic of the target might be applied to power line tower span analysis.