982 resultados para Physic-chemical characteristics
Resumo:
Compararam-se a espectroscopia de ultra-som (US) e os métodos tradicionais (MT) utilizados para a determinação de características físico-químicas do leite e estimaram-se as correlações entre esses métodos e suas acurácias. As características densidade, extrato seco desengordurado (ESD), teor de proteínas e teor de gordura foram determinadas em 65 amostras de leite cru por ambos os métodos. As densidades médias determinadas pelo US e pelos MT não diferiram entre si (P=0,14), e a correlação encontrada entre os dois métodos para a determinação da densidade não foi significativa (P= 0,08). Os teores médios de ESD, proteína e gordura encontrados pelo US e pelos MT foram diferentes (P=0,04, P<0,0001 e P<0,0001, respectivamente), as correlações entre os dois métodos utilizados para a análise dessas características foram positivas e significativas (r=0,0109, r=0,0007, r= <0,0001, respectivamente) e as acurácias dos métodos para essas determinações foram de 0,160, 0,062 e 0,145, respectivamente. Foi determinada a equação de regressão linear, que associa o teor de gordura obtido no método de espectroscopia de ultra-som ao do método butirométrico, que apresentou coeficiente de determinação de 0,5936.
Resumo:
Frutos de manga (Mangifera indica L.) variedade Keitt, colhidos em estádio pré-climatérico, receberam tratamento com 500 e 1.000 ppm de Ethrel (com exceção da testemunha), sendo submetidos a determinações de carboidratos solúveis, vitamina C, proteínas e umidade, de acordo com amostragens realizadas 3, 6, 9 e 16 dias pós-colheita. Os resultados obtidos, revelaram que o Ethrel não excerceu nenhuma influência nas características químicas dos frutos e que, somente em termos de carboidratos solúveis e vitamina C, os frutos mostraram alterações durante a maturação.
Resumo:
Recentemente, tem ocorrido um grande aumento na produção de aves, com destaque para a carne de peru, motivado pelo aumento das exportações e a conquista de novos mercados. Como conseqüência, tem sido gerada uma grande quantidade de resíduos orgânicos com potencial impacto sobre o ambiente. A cama de peru constitui-se no principal resíduo dessa atividade avícola, e uma das formas de sua utilização é a sua disposição em solos como condicionador de suas características físicas e químicas. Assim, objetivou-se com este trabalho avaliar o efeito da aplicação da cama de peru na estabilidade de agregados de um Latossolo Vermelho Distrófico típico, sob pastagem de Brachiaria decumbens, localizado em Uberlândia, no Triângulo Mineiro, Minas Gerais. A cama de peru foi aplicada nas dosagens de: 0 (controle), 1.200, 2.400 e 4.800 kg ha-1 e 2.400 kg ha-1 + adubação mineral (36 kg ha-1 N, 60 kg ha-1 K2O e 60 kg ha-1de P2O5). As aplicações foram realizadas em janeiro de 2004 e o solo amostrado em duas épocas distintas (60 e 210 dias após aplicação) nas camadas de 0-20 e 20-40 cm para análise da estabilidade de agregados, avaliada pela percentagem total de agregados, percentagem de agregados maiores que 2mm, menores que 0,25mm e diâmetro médio geométrico (DMG). Não houve efeito das dosagens de cama de peru aplicadas na agregação do solo, entretanto, independentemente da dose aplicada houve um aumento na estabilidade de agregados, ao longo do tempo, notadamente na camada de 0-20 cm.
Resumo:
Avaliaram-se as alterações da fração fibrosa e as características químicas dos fenos de braquiária decumbens (Brachiaria decumbnes Stapf) e jaraguá (Hyparrhenia rufa Ness Stapf) não-tratados, tratados com uréia (U-5,4% da MS), uréia (UL-5,4% da MS) mais labe-labe (Lablab purpureus L. Sweet, cv. Highworth-3,0% da MS) ou amônia anidra (NH3 -3,0% da MS). O tratamento químico com uréia ou NH3 aumentou o pH e a digestibilidade in vitro verdadeira dos fenos. A amonização não alterou os teores de fibra em detergente ácido e celulose, mas diminuiu os de fibra em detergente neutro, hemicelulose e lignina. O uso do labe-labe como fonte adicional de urease não aumentou a eficiência da uréia no tratamento dos volumosos. As avaliações do conteúdo de umidade, do poder tampão e da atividade ureática são técnicas que podem auxiliar na previsão das respostas dos volumosos à amonização com o uso de uréia.
Resumo:
Avaliaram-se os efeitos da suplementação concentrada de novilhos, durante o período das águas, sobre o desempenho e características da carcaça. Foram utilizados 49 novilhos mestiços, mantidos em pastagem de Brachiaria decumbens. O experimento foi conduzido em três períodos experimentais, segundo um delineamento inteiramente casualizado. Foram fornecidos sal mineral (SAL), suplementos à base de milho e farelo de soja, com 20% PB, em níveis de 1,0 e 2,0 kg/dia (MFS1 e MFS2), e suplementos à base de farelo de trigo e farelo de soja, com 20% PB, em níveis de 1,0 e 2,0 kg/dia (FTFS1 e FTFS2), fornecidos diariamente. Não foram encontradas diferenças entre os tratamentos sobre ganho de peso médio diário (GMD) e ganho total (GDP Total). Os GMD foram: 0,887; 0,936; 1,047; 0,943; e 1,012 kg/animal/dia, respectivamente, para os tratamentos SAL, MFS1, MFS2, FTFS1 e FTFS2. Os animais submetidos aos diferentes tratamentos não exibiram diferenças nas características físicas e químicas da carcaça. Não houve diferenças quanto ao rendimento de carcaça dos novilhos dos diferentes tratamentos, que foi, em média, de 52,19%.
Resumo:
Soil and subsoil aluminium toxicity has been one of the main limiting factors for soybean and wheat yields in tropical soils. Usually liming is the most effective way to deal with soil acidity and Al toxicity, but in no-till systems the soil is not disturbed making it impossible to incorporate lime in the arable layer, and lime has been usually applied on the soil surface. In this paper soybean and wheat responses to lime applied on the soil surface and/or incorporated in the soil arable layer were evaluated during the transition from conventional tillage to a no-till system. The experiment was conducted for 3 years in Parana, Brazil, using a wheat-soybean rotation. Lime rates ranging from 0.0 to 9.0 t ha(-1) were incorporated down to 20 cm and 4.5 t ha(-1) were spread or not on the soil surface. Soil samples were taken down to 60 cm, 39 months after the first lime application. Soil chemical characteristics were affected by lime application down to 60 cm deep in the profile. Soybean responded to lime irrespective of application method, but the highest accumulated yield was obtained when lime was incorporated into the arable layer. For wheat, the more sensitive the cultivar, the greater was the response to lime. During the introduction of a no-till system, lime must be incorporated into the arable layer when the wheat cultivar is Al-sensitive. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
The experiment was carried out at Sao Manuel Experimental Farm, Agronomy College, São Paulo State University, Brazil, in a Dark-Red Latosol (loamy sand) to verify oat (Avena strigosa Schreber) rooting patterns under different plant populations (1,5 x 10(6) and 2.5 x 106 plants/ha) and row spacings (0.20 and 0.30 m.). Soil and roots were sampled 81 days after planting, at bloom stage. Cylindrical cores with 2.6 cm diameter were taken from soil depths of 0-10, 10-20, 20-40 and 40-60 cm. At the same time, plant canopies where also sampled to determine the dry weight. Soil analysis showed P to be concentrated in the upper 10 cm whereas the bases were uniform in the profile. There was a high root concentration in the 0-10 cm layer (9.9 to 13.0 cm/cm3 under the row and 10.0 to 11.5 cm/cm2 in the inter-row), which was not related to chemical characteristics of the soil. There was no effect of plant population or row spacing on oat root distribution or growth in the soil profile.
Resumo:
In our country, the intensive culture of fish has been making progress due to the availability of extruded rations, which are characterized by the way they have been formulated to assist the nutritional demands of the tropical species and for facilitating a better practice of alimentary handling. This process checks the extruded product density and the desirable physical/chemical aspects to a diet that should be handled in the water, the critical factor of this activity. It is important to emphasize that this product stays to the surface of the water, facilitates the consumption control and the observation of the general aspects of the school of fish, as well as guaranteeing that no deterioration of the physical/chemical characteristics of the water occurs. The floating characteristic of the extruded ration is preferable for farmers because most of the tropical species feed at the surface of the water. In some cases, in the function of the alimentary habit, the thermal conditions of the water and the handling system produce granules with different densities. This is due to the humidity and the applied cooking heat, which modifies the time of hydration, and consequently the ability to float. To establish the physical presentation idea for a ration for tropical fishes, it is necessary that the pellets come in sizes, textures, humidities and densities in order to allow for the different phases of the lives of the fishes. This ration should be the result of characteristics of the species, such as the anatomophysiologics particularities, alimentary habits, digestive capacity and alimentary behavior. Only in this way is it possible to offer to those fishes a ration whose nutritious value and physical presentation facilitate the best biological and economic answers.Those aspects need to be reviewed because the tropical species that are cultivated in our country present selective behavior in relation to the size of the pellet. Generally, this has access to the digestive system without waste; the digestibility, therefore, is dependent upon the size of the particles and the physical aspects of the pellets. They should still consider that those granules could be less abrasive and softer. The extruded rations available in the national market present a qualitative reference to its proteic level, whose consequence allows us to infer that those are overestimated for the final phase of those fishes. Thus, the final cost of production is made unfeasible. In this point of view of the development of the national fish culture, and the growing adoption of the intensive system of production, it can link that such progress is a function of the availability of the rations in the extruded form. Although this technique of processing of rations has revolutionized the market in such a way that has been seen as preferable for farmers, some feel that there is a lack of products best suited for the initial phases of fingerlings production.
Resumo:
The instability of cassava culinary quality is a problem in the market. This work had the purpose of evaluating the interference of the productivity, rain precipitation and physical-chemical characteristics on the cooking time of the IAC 576-70 cultivar, from the 6(th) to the 12(th) month after the planting. The physical parameters evaluated were: difficulty in peeling (easy, medium, and hard), difficulty in cutting in long, thin sticks with a manual machine, being those cut in a subjective way. In the analysis of the cooked root, the percentage of water absorbed into the cassava pieces, the color, white points formed inside the pieces of cassava, gel formation around the pieces of cassava, and cooking time were evaluated. The pH, acidity, moisture, ashes, fibers, ether extract, protein, reducing sugars, and starch of the roots were also monthly evaluated. From the results obtained in the present work, it may be concluded that the cassava IAC 576-70, when planted in July, in Botucatu-SP area, must be harvested at the age of nine months, without damage to the productivity, starch level and root cooking, and the harvest could be extended up to ten months. The producers should follow the sum of precipitation index ten days before the harvest, and this value should be the smallest as it may be and the producers should not harvest when this value is more than 100 mm, in order not to hinder the cooking of the root.
Resumo:
The aim of this study was to characterize the LenYois Maranhenses ponds (Maranhao State, Brazil) with respect to morphometry and physical and chemical aspects of the water body, in particular, the planktonic community. LenYois Maranhenses is a tropical coastal region with sand dunes and numerous interdunal ponds, most of them temporary. Ten ponds were studied, and a nictemeral variation was carried out. They have similar physical and chemical characteristics (high temperature - 27.5 to 32.0 [degree]C, acid pH - 4.9 to 6.2, low values of dissolved nutrients, chloride - 0.75 to 1.00 mg.L[long dash]1, and electric conductivity - 18.8 to 33.2 [mu]S.cm[long dash]1, and light penetration up to the sediment). With respect to the plankton, it is likely that the different histories of colonization, the formation of the ponds, and the initial organisms, affect the species richness, density and dominance observed. The lakes were classified as polymitic and oligotrophic.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Salt stress decreases the osmotic potential of soil solution causing water stress, causing toxic effects in the plants resulting in injuries on the metabolism and nutritional disorders, thus compromising the plant growth, resulting in lower production. The calcium silicate and magnesium can perform the same function as limestone, besides providing silicon to plants, may also contribute to the resistance of plants to salt stress. Thus, the objective of this study was to evaluate the effect of calcium and magnesium silicate on the growth of the castor oil plant BRS Energia cultivated under saline conditions. This study evaluated plant height, stem diameter, number of leaves, leaf area, dry weight of shoot and root, and soil chemical characteristics. There was no interaction between factors of salinity level and of silicate level regarding the evaluated variables. There was a direct relationship between salinity levels and plant growth in height and stem diameter. The K concentration in soil were affected by salinity levels.
Resumo:
Electrolytes may modify the physical-chemical characteristics of colloidal particle interfaces in suspension, which can favour gel or aggregate formation. The influence of NH4Cl loading on the aggregation and gelation of SnO2 colloidal suspensions was investigated using measurements of rheology, turbidity and infrared spectra. A rapid aggregate growth for samples with Cl- > 20 mM was observed. With increasing age, gelation was observed due to formation of interaggregate bonds. For concentration of Cl- between 20 and 9 mM, the aggregation process was slower allowing the formation of gel with a network which was not destroyed as the gel was submitted to a small rate of shear. As aging continues, the condensation reaction between OH groups gave rise to the formation of Sn-O bonds, irrespective of the electrolyte loading. © 1992 Elsevier Science Publishers B.V. All rights reserved.
Resumo:
The experiments were conducted during two years (1990/91 and 1992/93), to study the effects of the incorporation of bengal velvetbean and of residues on the development and yield of the winter bean crops. The trial was developed in experimental field at the Faculdade de Engenharia de Ilha Solteira, UNESP, located in Selvíria, MS, Brazil, in dark red latosol covered by savanna vegetation. It was concluded that: the incorporation of residues of corn or corn + bengal velvetbean or only bengal velvetbean had no effects on soil chemical characteristics, evaluated 80 days after the residues incorporation; in yield and bean crop development, no statistical differences were observed among treatments.
Resumo:
The objective of this study was to evaluate the effects of the use of recombinant bovine somatotropin (rbST) in weight gain, feeding efficiency and chemical characteristics of meat of young bulls. Fifty nine young bulls were used: 30 crossbred Simmental x Nelore and 29 Nelore aging between seven to eight months, weighing 236 and 116 kg, respectively. A randomized experiment in a 2 × 2 factorial arrangement was used. There were two levels of rbST (0 and 250 mg/animal/14 days) and two breed groups subdivided in two experimental phases. Diet was based on corn silage and concentrate aiming at a weight gain of 0.8 a day for Phase I (70 days) and 1.3 kg for Phase II (98 days). Animals were slaughtered at 13 months of age and the measurements of carcass dressing and meat quality were taken. Results showed that cross-breeding animals overcame (p<.01) the Nelore breed in weight gain and final weight at slaughtering. Use of rbST has not influenced weight gain, final weight, carcass weight and chemical characteristics of meat (p>.05). The use of rbST improved feeding efficiency 11.91 % for cross-bred and 24.32% for Nelore in Phase II.