Thermal Performance of a Solarus CPC-Thermal Collector

The  aim  of  this  master  thesis  is  an  investigation  of  the  thermal  performance  of  a  thermal compound parabolic concentrating (CPC) collector from Solarus. The collector consists of two troughs with absorbers which are coated with different types of paint with  unknown  properties.  The  lower  and  upper  trough  of  the  collector  have  been  tested individually. In  order  to  accomplish  the  performance  of  the  two  collectors,  a  thorough  literature  study  in  the  fields  of  CPC  technology,  various  test  methods,  test  standards  for  solar thermal  collectors  as  well  as  the  latest  articles  relating  on  the  subject  were  carried  out. In addition, the set‐up of the thermal test rig was part of the thesis as well. The thermal  performance  was  tested  according  to  the  steady  state  test  method  as  described in the European standard 12975‐2. Furthermore, the thermal performance of  a  conventional  flat  plate  collector  was  carried  out  for  verification  of  the  test  method. The  CPC‐Thermal  collector  from  Solarus  was  tested  in  2013  and  the  results  showed  four  times  higher  values  of  the  heat  loss  coefficient  UL (8.4  W/m²K)  than  what  has been reported for a commercial collector from Solarus. This value was assumed to be too large and it was assumed that the large value was a result of the test method used that time. Therefore, another aim was the comparison of the results achieved in this work with the results from the tests performed in 2013. The results of the thermal performance showed that the optical efficiency of the lower trough of the CPC‐T collector is 77±5% and the corresponding heat loss coefficient UL 4.84±0.20  W/m²K.  The  upper  trough  achieved  an  optical  efficiency  of  75±6  %  and  a  heat loss coefficient UL of 6.45±0.27 W/m²K. The results of the heat loss coefficients  are  valid  for  temperature  intervals  between  20°C  and  80°C.  The  different  absorber paintings have a significant impact on the results, the lower trough performs overall better.  The  results  achieved  in  this  thesis  show  lower  heat  loss  coefficients UL and higher optical efficiencies compared to the results from 2013. 

Computer simulation of the stochastic transport equation

Trabalho apresentado no 37th Conference on Stochastic Processes and their Applications - July 28 - August 01, 2014 -Universidad de Buenos Aires

Analysis of the economic and financial relations between Latin American and the Caribbean and the BRICS group

This document has been prepared in compliance with Activity III.1.2 of the Work Programme of SELA for the year 2015, entitled “Analysis of the economic and financial relations between Latin America and the Caribbean and the BRICS countries”. The document comprises an introduction, four chapters and a final section with the conclusions and recommendations stemming from the study. Chapter I describes the economic performance of the BRICS countries, their economic relations with Latin America and the Caribbean and the functioning of the development banks of the member countries. Chapter II assesses the financial architecture of Latin America and the Caribbean and explores the needs for financing in the region. Chapter III deals with the regulatory frameworks governing public and private investments in Latin America and the Caribbean and the Bilateral Investment Treaties with the BRICS countries. Finally, Chapter IV describes the main features of the New Development Bank (NDB) and the Contingent Reserve Agreement of the BRICS

Validation of the Deardorff model for estimating energy balance components for a sugarcane crop

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of tractive performance of four agricultural tractors in laterally inclined terrain

O presente trabalho teve como objetivo avaliar o desempenho operacional de quatro tratores agrícolas com tração dianteira auxiliar, em função de seis inclinações laterais, em uma pista lateral de ensaios, pertencente à Faculdade de Ciências Agronômicas da Universidade Estadual Paulista, Câmpus de Botucatu. As inclinações laterais foram 0; 5; 10; 15; 20 e 25 graus. em todas estas situações, os tratores operaram com carga predeterminada de tração imposta ao trator tracionado de 40 kN na inclinação de 0 grau. Portanto, foi utilizado um delineamento em blocos casualizados (DBC), sendo seis inclinações e quatro tratores, e com três repetições para cada tratamento. As variáveis analisadas foram patinhagem, força de tração, consumo horário de combustível e velocidade de deslocamento. Concluiu-se que a configuração dos rodados pneumáticos influenciaram no desempenho operacional dos tratores, conforme aumentaram as inclinações laterais do terreno.

Determination of the numerical parameters of a continuous damage model for the structural analysis of clay brick masonry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

STUDY of THE TURNING NICKEL BASE ALLOY PYROMET (R) 31V (SAE HEV8)

Considering the constant technological developments in the aeronautical, space, automotive, shipbuilding, nuclear and petrochemical fields, among others, the use of materials with high strength mechanical capabilities at high temperatures has been increasingly used. Among the materials that meet the mechanical strength and corrosion properties at temperatures around 815 degrees C one can find the nickel base alloy Pyromet 31V (SAE HEV8). This alloy is commonly applied in the manufacturing of high power diesel engines exhaust valves where it is required high resistance to sulphide, corrosion and good resistance to creep. However, due to its high mechanical strength and low thermal conductivity its machinability is made difficult, creating major challenges in the analysis of the best combinations among machining parameters and cutting tools to be used. Its low thermal conductivity results in a concentration of heat at high temperatures in the interfaces of workpiece-tool and tool-chip, consequently accelerating the tools wearing and increasing production costs. This work aimed to study the machinability, using the carbide coated and uncoated tools, of the hot-rolled Pyromet 31V alloy with hardness between 41.5 and 42.5 HRC. The nickel base alloy used consists essentially of the following components: 56.5% Ni, 22.5% Cr, 2,2% Ti, 0,04% C, 1,2% Al, 0.85% Nb and the rest of iron. Through the turning of this alloy we able to analyze the working mechanisms of wear on tools and evaluate the roughness provided on the cutting parameters used. The tests were performed on a CNC lathe machine using the coated carbide tool TNMG 160408-23 Class 1005 (ISO S15) and uncoated tools TNMG 160408-23 Class H13A (ISO S15). Cutting fluid was used so abundantly and cutting speeds were fixed in 75 and 90 m/min. to feed rates that ranged from 0.12, 0.15, 0.18 and 0.21 mm/rev, and cutting depth of 0.8mm. The results of the comparison between uncoated tools and coated ones presented a machined length of just 30% to the first in relation to the performance of the second. The coated tools has obtained its best result for both 75 and 90 m/min. with feed rate of 0.15 mm/rev, unlike the uncoated tool which obtained its better results to 0.12 mm/rev.

A physiological manoeuvre to improve the positivity of the gastro-oesophageal reflux scintigraphic test

One of the best examinations used routinely to detect gastro-oesophageal reflux (GOR) is scintigraphy and attempts are continuously being made to improve the performance of the test. We have tested a new manoeuvre to improve the results. Three hundred and twenty eight patients (190 males and 138 females, aged 1 month to 84 years, average 4.47 years) were studied after a 12 h fast period with 100 MBq of Tc-99(m)-Phytate, 50 ml volume, directly delivered into the stomach in a mixture of orange juice. All patients were strongly suspected of having GOR. Conventional acquisition was done for 20 min, at a rate of one frame every 20 s. in the middle of the examination, small children were put in the upright position and held there for a few seconds or released in a way that allowed movement; adults were asked to stand up and walk a few metres. The test was then continued for the remaining 10 min. The global index of positivity was 64.6% (76 positive cases in the first half of the examination and 134 positive cases only after the manoeuvre). The mean of GOR episodes observed in the positive cases without the manoeuvre was 0.5 per patient, significantly different from the mean of 1.59 noted after the manoeuvre (P<0.01). In 28 cases the manoeuvre increased either the intensity or the frequency of reflux previously detected without it. We believe that this manoeuvre should be performed in all scintigraphic tests aiming to detect GOR. In the present series, the manoeuvre increased the frequency of GOR episodes. ((C) 2001 Lippincott Williams & Wilkins)].

Effects of betaine on the growth of the fish piauçu, Leporinus macrocephalus

Testamos o efeito da betaína na performance de crescimento do peixe piauçu. Para tal, 21 espécimes (média ± DP: peso corpóreo: 14,9 ± 1,3 g) foram distribuídos aleatoriamente em um entre três tratamentos (n = 7 cada; 1 peixe/aquário): ração sem acréscimo de betaína (controle), 3,6 g betaína/Kg de ração, 7,1 g betaína/Kg de ração. Os peixes foram submetidos às condições experimentais por 60 dias. Os peixes apresentaram crescimento estatisticamente significativo ao longo do experimento, porém nenhuma diferença estatística foi encontrada para qualquer parâmetro analisado, exceto para o fator de condição o qual foi maior no grupo controle do que nos grupos tratados com betaína. de acordo com isso, concluímos que a betaína não melhora o crescimento do piauçu.

Reduction of the nutritional values of diets for hens through supplementation with phytase

Objetivou-se avaliar os efeitos da redução dos níveis nutricionais de dietas para poedeiras marrons em pico de postura sobre o desempenho das aves, a qualidade dos ovos e os parâmetros ósseos. No total foram avaliadas oito dietas, cada uma com cinco repetições de oito aves: 1. controle: formulada para suprir as exigências das aves; 2) controle + 0,03% ou 600 FTU; 3) 15% PB; 2.800 kcal de EM; 3,8% Ca e 0,28% Pd; 4) dieta 3 + 0,03% ou 600 FTU; 5) 14% PB; 2.750 kcal de EM; 3,4% Ca e 0,23% Pd; 6) dieta 5 + 0,03% ou 600 FTU; 7) 13% PB; 2.700 kcal de EM; 3,0% Ca e 0,18% Pd; e 8) dieta 7 + 0,03% ou 600 FTU. A redução dos níveis nutricionais prejudicou o desempenho das aves, principalmente a produção e massa de ovos, que melhorou com a inclusão de fitase nas dietas. Os parâmetros de qualidade dos ovos, no entanto, não se alteraram com a redução até o nível de 15% de PB; 2.800 kcal de EM/kg; 3,80% Ca e 0,280% Pd, o que não se repetiu nos níveis com menor densidade nutricional. Não houve efeito da redução dos níveis nutricionais sobre os parâmetros ósseos avaliados, exceto a resistência, que melhorou com a suplementação de fitase no nível de 600 FTU. A redução nos níveis nutricionais da dieta para 15% de PB, 2.800 kcal/kg de EM, 3,8% de Ca e 0,280% de Pd com a adição de 600 FTU não prejudica a produção nem a massa de ovos e melhora a saúde óssea das aves.

Clinical performance of a self-etching adhesive at 18 months

Purpose: To test the null hypothesis that beveling and/or etching enamel would not affect the 18-month clinical performance of the self-etching adhesive Clearfil SE Bond (CSEB) in noncarious cervical lesions (NCCL). Methods: With Institutional Review Board approval, 34 patients were enrolled in this study. A total of 120 NCCL was selected and assigned to four groups: (1) CSEB was applied without any cavity preparation; (2) CSEB was applied after beveling enamel; (3) CSEB was applied after etching enamel for 15 seconds with 35% phosphoric acid; (4) CSEB was applied after beveling and etching enamel. A microfilled composite resin was used for all restorations. Resuts: At 6 months after initial placement, 120 restorations (a 100% recall rate) were evaluated. At 18 months, 87 restorations (a 72.5% recall rate) were available for evaluation. A survival rate of 100% was measured for all groups at both 6 and 18 months. Sensitivity to air decreased significantly only for Group 3 (no bevel+acid etch) from baseline to 18 months without statistical changes from 6 months to 18 months. None of the other parameters resulted in significant differences for any of the four groups. However, when data were pooled, both the overall marginal discoloration and the overall marginal adaptation were significantly worse at 18 months than at baseline, while sensitivity to air decreased significantly from baseline to 18 months. The 18-month survival rate of the self-etching adhesive Clearfil SE Bond was not improved by enamel bevel or by enamel etching. Both overall marginal adaptation and overall marginal discoloration were worse at 18 months than at baseline.

Coating residual stress effects on fatigue performance of 7050-T7451 aluminum alloy

The tendency of the aircraft industry is to enhance customer value by improving performance and reducing environmental impact. In view of availability, aluminum alloys have a historically tendency to faster insertion due to their lower manufacturing and operated production infrastructure. In landing gear components, wear and corrosion control of many components is accomplished by surface treatments of chrome electroplating on steel or anodizing of aluminum. One of the most interesting environmentally safer and cleaner alternatives for the replacement of hard chrome plating or anodizing is tungsten carbide thermal spray coating, applied by the high velocity oxy fuel (HVOF) process. However, it was observed that residual stresses originating from these coatings reduce the fatigue strength of a component.An effective process as shot peening treatment, considered to improve the fatigue strength, pushes the crack sources beneath the surface in most of medium and high cycle cases, due to the compressive residual stress field induced. The objective of this research is to evaluate a tungsten carbide cobalt (WC-Co) coating applied by the high velocity oxy fuel (HVOF) process, used to replace anodizing. Anodic films were grown on 7050-T7451 aluminum alloy by sulfuric acid anodizing, chromic acid anodizing and hard anodizing. The influence on axial fatigue strength of anodic films grown on the aluminum alloy surface is to degrade the stress-life performance of the base material. Three groups of specimens were prepared and tested in axial fatigue to obtain S-N curves: base material, base material coated by HVOF and base material shot peened and coated.Experimental results revealed increase in the fatigue strength of Al 7050-T7451 alloy associated with the WC 17% Co coating. on the other hand, a reduction in fatigue life occurred in the shot peened and coated condition. Scanning electron microscopy technique and optical microscopy were used to observe crack origin sites, thickness and coating/substrate adhesion. (c) 2007 Elsevier B.V. All rights reserved.

Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.

Electromyographic study of the trapezius (pars media) and rhomboideus major muscles in movements of the arm (part 2)

The participation of the trapezius (pars media) and rhomboideus major muscles were studied electromyographically in movements of lateral and medial rotation (free and against resistance) of the arm. In the majority of cases both muscles were inactive during the performance of the analysed movements. Cases in which only one or both muscles acted in free rotation occurred only at the second half or ending of the movement. Records of electrical potentials during against resistance rotation were due to tensional efforts at the shoulder level.

Sensor for hydrogen peroxide based on Prussian Blue modified electrode: Improvement of the operational stability

Improvement of the operational stability of amperometric sensors based on Prussian Blue (PB) modified glassy carbon electrodes is presented. The long term performance of the sensors was evaluated by injection of hydrogen peroxide (5 μM in potassium buffer) solutions in a flow-injection system during a period of 5-10 h. The following parameters were investigated and correlated with the performance of the sensor: the times for electrodeposition and electrochemical activation, temperature, storage time, pH, composition of the buffer solution and of volume sample injected. These analytical characteristics of the modified electrode can be emphasized: initial sensitivity of 0.3 A cm-2 M-1, detection limit of ca. 0.5 μM, precise results (r.s.d.< 1.5%) and possibility to carry out around 50 samples (50 μL) per hour.