O papel de enfermeiros na equipe multidisciplinar frente ao sobrepeso/obesidade em ambiente de trabalho

Overweight and obesity are pandemics and have been widely discussed in Public Health and Health at Work. Comorbidities such as metabolic syndrome, hypertension, diabetes mellitus type 2, orthopedic disorders and coronary diseases can induce to absenteeism, reduced work performance, disability and death. The aim of this review is to discuss the role of the nurse in control and prevention of these illnesses in the workplace. We concluded that occupational health nurses work should act proactively with a multidisciplinary team aimed at individual and collective monitoring of actions designed to control and prevent overweight and obesity. Furthermore, this professional should follow up the health of individual workers with a high body mass index in order to warn and prevent comorbidities related to these conditions.

Aspectos oclusais na etiologia das desordenstemporomandibulares

Since the occlusion area is presented in almost all specialties of Dentistry, its relationship with the health of the patient has been shown. The etiology of temporomandibular disorders is multifactorial and the occlusion is considered an etiologic factor. This study aimed to discuss the functional occlusion aspects and the presence of temporomandibular disorders. Literature Review: The loss of orthopedic balance can induce temporomandibular disorder. Therefore, both the physiological and functional occlusions have been analyzed as a dental relation. Several functional occlusal factors have been linked to the temporomandibular disorders such as deviations of centric relation to maximum intercuspation, occlusal interferences, absence of posterior teeth, changes on the occlusion vertical dimension, malocclusion, orthodontic treatment and parafunction. Conclusion: The most common occlusal factors related to temporomandibular disorders are quite frequent; however, the diagnosis and treatment of such disorders should be considered individually

Tratamento compensatorio da má oclusnao de classe lll: revisão de literatura

Class III malocclusion is less common occlusal relationship, covering less than 5% of the population. There are various forms of treatment in Class III malocclusion. Depending on how the form is expressed Class III and age of the patient, the therapy may be orthopedic and orthodontic surgical orthodontics. The objective was to review the literature of the last 10 years about ways to compensatory treatment of Class III malocclusion. Several articles were published between 04/2003 and 04/2013 in the Pubmed database from the keyword "Class III malocclusion". However, only 19 articles that addressed the compensatory treatment of Class III were selected. Based on the selected items it was concluded that the treatment of Class III malocclusions in children before the peak of pubertal growth has better prognosis with greater effects orthopedic and orthodontic minor effects. The ideal treatment option for this condition is the Rapid maxillary expansion associated with maxillary protraction of the same. The treatment of Class III malocclusion in young people after the peak of pubertal growth is doubtful prognosis. You can opt to treat rapid maxillary expansion and maxillary protraction of the same or fixed appliance, however, orthopedic effects can be the same or smaller than the orthodontic effects, depending on the age of the patient. Depending on the degree of Class III malocclusion in adults, the treatment will consist of dental compensations or orthognathic surgery.

Nível de atividade física no lazer em usuários do Sistema Único de Saúde

Although leisure physical activity has been investigated in general population, there is absence of data in Brazilian Public Health System about this issue. Thus, the purpose of this study was to analyze in patients attended by Public Health System the prevalence of leisure physical activity, as well as, to identify its correlates and associated diseases. Sample was composed by 963 patients (707 female and 256 male) randomly selected at five basic healthcare units. Leisure physical activity was assessed by Baecke’s questionnaire and subjects with ≥180 and ≥240 minutes per week were classified as sufficiently active. General and central obesity were assessed by body mass index and waist circumference, respectively. Diseases of high occurrence were classified according CID-10. There was low rate of physically active subjects in leisure time (14.8%),but high rate of abdominal obesity (70.1%) and orthopedic diseases (72.1%). Physically active subjects in leisure time had lower occurrence of orthopedic diseases (OR= 0.60 [OR95%CI: 0.37 – 0.98]). The same pattern of association was observed for central obesity (OR= 0.35 [OR95%CI: 0.19 – 0.65]). It is low the rate of physically active in leisure time at Brazilian Public Health System, which is associated with orthopedic diseases.

Characterization of the patellofemoral pain syndrome by frequency parameters of EMG signal

Patellofemoral pain syndrome (PFPS) is the most frequent complaint in orthopedic clinics; although, its etiology remains unclear [Bolgla, 2010; Felicio, 2011]. Trying to understand its causes has been used time analysis of electromyography (EMG), but this method shows controversies. The aim of this study was to apply a method of processing the EMG signal in the frequency domain of the vastus lateralis (VL) and vastus medialis (VM) muscles for the characterization of PFPS.

Characterization of biomechanical parameters during stair ascent

Stair climbing is a functional activity often cited as main complaint by patients with orthopedic – as patellofemoral pain syndrome – or neurologic alterations. Moreover, the stair climbing is usually used as therapeutic resource. However, few studies have been conducted to characterize the movement during the ascent or descent of stairs and these studies concluded that the high variability of the data could not confirm the results [Yu, 1997] . In this way, this study aimed to verify which parameters show less variation and so, are more appropriate to characterize the stair climbing.

Diffusion of oxygen in Ti-15Mo-xZr alloys studied by anelastic spectroscopy

Because of their low elasticity modulus, titanium alloys have excellent biocompatibility, and are largely used in orthopedic prostheses. Among the properties that are beneficial for use in orthopedic implants is the elasticity modulus, which is closely connected to the crystal structure of the material. Interstitial elements, such as oxygen, change the mechanical properties of the material. Anelastic spectroscopy measurements are a powerful tool for the study of the interaction of these elements with the metallic matrix and substitutional solutes, providing information on the diffusion and concentration of interstitial elements. In this study, the effect of oxygen on the anelastic properties of alloys in the Ti-15Mo-Zr system was analyzed using anelastic spectroscopy measurements. The diffusion coefficients, pre-exponential factors, and activation energies of these alloys were calculated for oxygen.

Effect of the substitutional elements on the microstructure of the Ti-15Mo-Zr and Ti-15Zr-Mo systems alloys

Titanium alloys have excellent biocompatibility, and combined with their low elastic modulus, become more efficient when applied in orthopedic prostheses. Samples of Ti-15Mo-Zr and Ti-15Zr-Mo system alloys were prepared using an arc-melting furnace with argon atmosphere. The chemical quantitative analysis was performed using an optical emission spectrometer with inductively coupled plasma and thermal conductivity difference. The X-ray diffractograms, allied with optical microscopy, revealed the structure and microstructure of the samples. The mechanical analysis was evaluated by Vickers microhardness measurements. The structure and microstructure of alloys were sensitive to molybdenum and zirconium concentration, presenting α′, α″ and β phases. Molybdenum proved to have greater β-stabilizer action than zirconium. Microhardness was changed with addition of molybdenum and zirconium, having Ti-15Zr-10Mo (436 ± 2 HV) and Ti-15Mo-10Zr (378 ± 4 HV) the highest values in each system.

Obtenção de nanofibras de carbono a partir do processo de eletrofiação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relação entre a reatividade de pontos de acupuntura e atividade física com afecções ortopédicas determinadas por exames de imagens em equinos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do corticosteroide injetado no tendão calcâneo de coelhos: análise histológica, biomecânica e das expressões de metaloproteinases e interleucinas

Pós-graduação em Bases Gerais da Cirurgia - FMB

Relação entre a reatividade de pontos de acupuntura e atividade física com afecções ortopédicas determinadas por exames de imagens em equinos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos do corticosteroide injetado no tendão calcâneo de coelhos: análise histológica, biomecânica e das expressões de metaloproteinases e interleucinas

Pós-graduação em Bases Gerais da Cirurgia - FMB

Characterization of a new beta titanium alloy, Ti-12Mo-3Nb, for biomedical applications

In recent years, different beta titanium alloys have been developed for biomedical applications with a combination of mechanical properties including a low Young's modulus, high strength, fatigue resistance and good ductility with excellent corrosion resistance. From this perspective, a new metastable beta titanium Ti-12Mo-3Nb alloy was developed with the replacement of both vanadium and aluminum from the traditional Ti-6Al-4V alloy. This paper presents the microstructure, mechanical properties and corrosion resistance of the Ti-12Mo-3Nb alloy heat-treated at 950 degrees C for 1 h. The material was characterized by X-ray diffraction and by scanning electron microscopy. Tensile tests were carried out at room temperature. Corrosion tests were performed using Ringer's solution at 25 degrees C. The results showed that this alloy could potentially be used for biomedical purposes due to its good mechanical properties and spontaneous passivation. (c) 2011 Elsevier B.V. All rights reserved.

Applying validated quality indicators to surgical antibiotic prophylaxis in a Brazilian hospital: Learning what should be learned

Background: Compliance with the best surgical antibiotic prophylaxis practice is usually low despite many published guidelines. Objective: This study investigated compliance with the Hospital Infection Control Committee guideline for antibiotic prophylaxis in a Brazilian hospital using quality indicators. Methods: A retrospective study was carried out from November 2009 to March 2010. Medical records from adult inpatients undergoing cardiac, neurologic, and orthopedic clean surgeries were included. The full compliance index was considered 100% when the antibiotic prophylaxis showed adequacy in all evaluated attributes. Analyses were conducted with 5% significance. Results: Medical records from 101 cardiac, 128 neurologic, and 519 orthopedic surgical patients were evaluated. The compliance index was 4.9%, and the compliance index according to specialty was 5.8%, 3.1%, and 3.0%, respectively, for orthopedic, neurologic, and cardiac surgeries. The attribute route of administration produced the best outcomes, whereas the attribute duration of antibiotic prophylaxis produced the worst. No association was identified between compliance to the attributes and patient characteristics. Conclusion: This study showed a low level of adherence to Hospital Infection Control Committee guidelines for antibiotic prophylaxis. This suggests that different strategies should be implemented to promote the best possible practice in the field of antibiotic prophylaxis with greater surgeon engagement. Copyright (C) 2012 by the Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.