Hydrogen Sensor Application of Anodic Titanium Oxide Nanostructures

Hydrogen (H2) fuel cells have been considered a promising renewable energy source. The recent growth of H2 economy has required highly sensitive, micro-sized and cost-effective H2 sensor for monitoring concentrations and alerting to leakages due to the flammability and explosiveness of H2 Titanium dioxide (TiO2) made by electrochemical anodic oxidation has shown great potential as a H2 sensing material. The aim of this thesis is to develop highly sensitive H2 sensor using anodized TiO2. The sensor enables mass production and integration with microelectronics by preparing the oxide layer on suitable substrate. Morphology, elemental composition, crystal phase, electrical properties and H2 sensing properties of TiO2 nanostructures prepared on Ti foil, Si and SiO2/Si substrates were characterized. Initially, vertically oriented TiO2 nanotubes as the sensing material were obtained by anodizing Ti foil. The morphological properties of tubes could be tailored by varying the applied voltages of the anodization. The transparent oxide layer creates an interference color phenomena with white light illumination on the oxide surface. This coloration effect can be used to predict the morphological properties of the TiO2 nanostructures. The crystal phase transition from amorphous to anatase or rutile, or the mixture of anatase and rutile was observed with varying heat treatment temperatures. However, the H2 sensing properties of TiO2 nanotubes at room temperature were insufficient. H2 sensors using TiO2 nanostructures formed on Si and SiO2/Si substrates were demonstrated. In both cases, a Ti layer deposited on the substrates by a DC magnetron sputtering method was successfully anodized. A mesoporous TiO2 layer obtained on Si by anodization in an aqueous electrolyte at 5°C showed diode behavior, which was influenced by the work function difference of Pt metal electrodes and the oxide layer. The sensor enabled the detection of H2 (20-1000 ppm) at low operating temperatures (50–140°C) in ambient air. A Pd decorated tubular TiO2 layer was prepared on metal electrodes patterned SiO2/Si wafer by anodization in an organic electrolyte at 5°C. The sensor showed significantly enhanced H2 sensing properties, and detected hydrogen in the range of a few ppm with fast response/recovery time. The metal electrodes placed under the oxide layer also enhanced the mechanical tolerance of the sensor. The concept of TiO2 nanostructures on alternative substrates could be a prospect for microelectronic applications and mass production of gas sensors. The gas sensor properties can be further improved by modifying material morphologies and decorating it with catalytic materials.

Co-creating Value For Smart Phone Operating Systems Via Virtual Discussion Forums

In the traditional way, value is created by manufacturer or producer of a product without engaging the customers. So, traditionally value creation is a monopoly in the part of a manufacturer. After gathering all the raw materials the manufacturers are inserting value to a product. And the inserted value is recognized in the time of consuming the product. In the modern time though there is traditional way of value creation but with the increase of more educated, smart, and technically sound customers the idea of value creation has changed. Now, customers are also contributing in value creation as value co-creator even before the product is consumed. This scenario has been encountered in the thesis with the main purpose of how value is cocreated in smart phone operating systems. The purpose is further divided into the following supobjectives: o What is value co-creation in smart phone operating systems? o Who participates in value co-creation in smart phone operating systems? o What are the procedures that are involved in value co-creation in smart phone operating systems? The research was conducted as a qualitative desk study by observing two of the leading smart phone operating system providers. Data has been collected from the official discussion forum of both the operating system providers. Other general concepts relating to the purpose of the study has been encountered through literature review. The research findings reveal that customers and companies both together co-create value of anticipated level when they communicate and interact with each other. However, most of the time customer to customer interactions, dialogues and discussions that come out in the core conversation help the value co-creation. The value co-creation framework sets up the customer at the main focus of value creation theory. By nullifying the inherited notion that companies only create value within its boundary and provide it to their customers in exchange of currencies. Rationally, it has been commenced that the firms are merely compromising value propositions to its customers. But the value has been co-created in a point where offerings are combined and interacted with customers’ capabilities, knowledge, resources and perceptions. This new perspective has radically altered the prospect of firms towards its customers. Typically customers are now taking part in value cocreation as a crucial member.

Evaluation of the Efficiency of Line-Start Permanent-Magnet Machines as a Function of the Operating Temperature

The standard squirrel-cage induction machine has nearly reached its maximum efficiency. In order to further increase the energy efficiency of electrical machines, the use of permanent magnets in combination with the robust design and the line start capability of the induction machine is extensively investigated. Many experimental designs have been suggested in literature, but recently, these line-start permanent-magnet machines (LSPMMs) have become off-the-shelf products available in a power range up to 7.5 kW. The permanent magnet flux density is a function of the operating temperature. Consequently, the temperature will affect almost every electrical quantity of the machine, including current, torque, and efficiency. In this paper, the efficiency of an off-the-shelf 4-kW three-phase LSPMM is evaluated as a function of the temperature by both finite-element modeling and by practical measurements. In order to obtain stator, rotor, and permanent magnet temperatures, lumped thermal modeling is used.

Kahden lämmitysjärjestelmiä valmistavan tuotantoyksikön toimintojen yhdistäminen kustannustehokkuuden lisäämiseksi

Tämä työ käsittelee Oilon Oy:n tehtaan layout -suunnittelua, kun yhdistetään kaksi eri kiinteistössä toimivaa tuotantoyksikköä saman katon alle. Yksiköt ovat Hollolassa toimiva Oilon Home Oy ja Lahden pääkonttorissa toimiva Oilon Industry Oy. Yhdistämisellä haetaan säästöjä tuotantoyksiköiden välisistä logistiikkakuluista sekä kiinteistön vuokra- ja ylläpitokuluista ja samalla tehostetaan tehtaan sisäistä materiaalinkäsittelyä. Oilon Oy on toiminut Lahden pääkonttorissa jo yli 50 vuoden ajan ja sen tuotanto on kokenut historiansa aikana useita pienempiä muutoksia, jotka ovat jättäneet nykyiseen layoutiin paljon toivomisenvaraa. Jotta molemmat tuotantoyksiköt saadaan mahtumaan Lahden yksikköön, on sinne saatava luotua tarvittavat tilat siellä olemassa oleville toiminnoille ja Hollolan yksiköstä saapuville tuotantolinjoille. Työn alussa perehdytään kirjallisuuden avulla siihen kuinka tuotanto on kehittynyt maailmalla lähihistorian aikana, jotta voidaan paremmin ymmärtää Oilon Oy:n nykytilanteeseen johtaneita syitä. Koska Hollolasta saapuville tuotantolinjoille ei ole tarkoitus rakentaa uutta tuotantotilaa, pyritään tilaa vapauttamaan Lahden tehtaalta varastointia tehostamalla ja sen logistiikkaa helpottamalla. Tämän vuoksi vertaillaan yleisimpiä tavaroiden varastointi ratkaisuita sekä tutkitaan kuinka materiaalin käsittelyä voitaisiin tehostaa varastossa ja tuotantosuluissa. Varastoinnin tehostaminen ei kuitenkaan yksin riitä vapauttamaan tarvittavia tiloja, joten layout-muutoksen aikana rakennetaan myös kaksi uuttaa varastohallia. Uudessa layout-suunnitelmassa huomioidaan kunkin solun nykyiset ja tulevat tilantarpeet, sekä rakennetaan ne niin, että työvoimaa voidaan käyttää niissä joustavasti eri tuotteiden valmistamiseen. Tutkimusmetodeina käytetään teemahaastatteluita, joilla selvitetään työntekijöiden tarpeet sekä kirjallisuuden avulla perehdytään Lean-tuotantoon, kanban:iin, 5S:ään ja arvovirta-analyysiin. Näitä soveltamalla saadaan luotua tehokkaasti toimiva kokonaisuus, jolla tavoitellut säästöt saadaan toteutumaan.

Function Room

The function room and cafeteria in the former College of Education, now Welch Hall, at Brock.

La1-xSrxMnO3 as a candidate for a room temperature pressure sensor /

Perovskite manganite compounds, Lai-xDxMnOs (D-divalent alkaline earth Ca, Sr or Ba), whose electrical and magnetic properties were first investigated nearly a half century ago, have attracted a great deal of attention due to their rich phase diagram. From the point of view of designing a future application, the strong pressure dependence of the resistivity and the accompanying effects in thin films have potential for application in pressure sensing and electronic devices. In this study we report our experimental investigations of pressure dependence of the resistivity of Lao.siSvo^iQMnOs and Lai-xSvxMnOs (LSMO) epitaxial films with x= 0.15, 0.20, 0.25, 0.30, 0.35, on SrTiOs substrates.

Clara Irvin Chapman, Thurmond Clarke Memorial Library Heritage Room, Chapman College, Orange, California

Clara Irvin Chapman's last visit to the Chapman campus was in March, 1967 for the opening of the Thurmond Clarke Memorial Library. She is in the Heritage Room by a portrait of her late husband, Charles Clarke Chapman, for whom the college is named.

Clara Irvin Chapman, Thurmond Clarke Memorial Library Heritage Room, Chapman College, Orange, California

Clara Irvin Chapman's last visit to the Chapman campus was in March, 1967 for the opening of the Thurmond Clarke Memorial Library. She is in the Heritage Room by a portrait of her late husband, Charles Clarke Chapman, for whom the college is named.

Clara Irvin Chapman, Thurmond Clarke Memorial Library Heritage Room, Chapman College, Orange, California

Clara Irvin Chapman's last visit to the Chapman campus was in March, 1967 for the opening of the Thurmond Clarke Memorial Library. She is in the Heritage Room of the library.

Clara Irvin Chapman, Thurmond Clarke Memorial Library Heritage Room, Chapman College, Orange, California

Clara Irvin Chapman's last visit to the Chapman campus was in March, 1967 for the opening of the Thurmond Clarke Memorial Library. She is in the Heritage Room by a portrait of her late husband, Charles Clarke Chapman, for whom the college is named.

Mary Louise Tea Room, in the Barker Brothers Department Store in downtown Los Angeles, California

Halftone photographic postcard showing the Mary Louise Tea Room, in the Barker Brothers Department Store in downtown Los Angeles, California. The tea room was run by Dolla Harris, sister of C. C. Chapman.

Weight room, Hutton Sports Center, Chapman College, Orange, California

Weight room, Hutton Sports Center, 219 E. Sycamore St., Chapman College, Orange, California, March, 1979. The Harold Hutton Sports Center, completed in 1978, is named in honor of this former trustee, and made possible by a gift from his wife, Betty Hutton Williams.

Dormitory room in Morlan Residence Hall, Chapman College, Orange, California

Two students seated in a dormitory room, Morlan Residence Hall, Chapman College, Orange, California. Photographer's text at bottom edge of photograph: Rene Laursen, Photography, 702 N. Grand, Santa Ana, California, 92701 -- [image number] 4905-1.

Presidents Dining Room, Old Student Union, Chapman College, Orange, California

Presidents Dining Room, old Student Union, Chapman College, Orange, California. Furniture is from the Rankin estate; moved from the Grace Rankin Lounge in Memorial Hall.