New focus of active transmission of Chagas disease in indigenous populations in the Peruvian Amazon basin

Introduction Several cases of acute Chagas disease (ACD) have been reported in the Peruvian Amazon basin. Methods The objective was to describe and investigate 6 ACD cases in children from indigenous Amazon communities in the province of Datem del Marañón in Loreto department (2006-2010). Results The mean age was 3.6 years. All patients had fever, 4/6 hepatomegaly, 2/6 splenomegaly, and 5/6 had trypomastigotes of Trypanosoma cruzi on thick smears. The fatality rate was 33.3%. Rhodnius pictipes and Rhodnius robustus adults were found inside the homes and in the peri-domiciles. Conclusions All cases reported were isolated cases. We report a new focus of ACD in indigenous populations.

Active and latent tuberculosis in prisoners in the Central-West Region of Brazil

Introduction Jailed populations exhibit high rates of tuberculosis (TB) infection and active disease. Methods A cross-sectional study was performed to estimate the prevalence of latent and active TB and to identify factors associated with latent infection in inmates. Results The prevalence of latent TB was 49%, and the prevalence of active TB was 0.4%. The presence of a Bacille Calmette-Guérin (BCG) scar (prevalence ratio (PR)=1.65; 95% confidence interval (CI): 1.09-2.50; p=0.0162) and the World Health Organization (WHO) score for active TB in prisons (PR=1.07; 95% CI: 1.01-1.14; p=0.0181) were correlated with infection. Conclusions The identification of associated factors and the prevalence of latent and active TB allows the development of plans to control this disease in jails.

Active surveillance to determine the impact of methicillin resistance on mortality in patients with bacteremia and influences of the use of antibiotics on the development of MRSA infection

Introduction Methicillin-resistant Staphylococcus aureus (MRSA) is among the most important pathogens of nosocomial infections, mainly in intensive care units (ICUs), and accounts for 40-60% of all healthcare-associated S. aureus infections. We evaluated the incidence of nosocomial infection by S. aureus, identified the risk factors for MRSA infection, and evaluated the effect of resistance to methicillin on mortality in patients. Methods We conducted MRSA surveillance at a university hospital in Brazil from January 1, 2010, to December 31, 2010, and performed a retrospective case-control matched study to evaluate the frequency of subsequent MRSA bacteremia and death among patients. We evaluated and compared the risk factors between patients with MRSA and methicillin-sensitive Staphylococcus aureus (MSSA) infection. Results Sepsis was the most common cause of infection (17.7/1,000 patient-days), followed by surgical site (11.4/1,000 patient-days), pneumonia (4.1/1,000 patient-days), and urinary tract infection (2.4/1,000 patient-days). The significant risk factors were time of hospitalization, use of central vascular catheter (CVC), urinary catheter, nasogastric tube, parenteral nutrition, tracheostomy, mechanical ventilation, and previous antibiotic administration, the latter of which was the only independent risk factor for MRSA infection. Mortality was significantly higher in patients with MRSA. The number of antibiotics tested was not related to increases in the frequency of MRSA/1,000 patient-days. The incidence of mortality attributable to MRSA (bloodstream infection) BSI was 50%. Conclusions Surveillance results showed that the use of high levels of antibiotics was directly related to the development of MRSA infection, and the mortality attributable to MRSA in patients with bacteremia was significant.

Non-gyrator type active inductors

Modern CMOS radio frequency (RF) Receivers have enabled efficient and increasing applications. The main requirement is to have system in a single chip, in order to minimize area and cost. For the purpose it is required the development of inductorless circuits for the key blocks of an RF receiver. Examples of this key blocks are RC oscillators, RF band pass filters, and Low Noise Amplifiers. The present dissertation presents an inductorless wideband MOSFET-only RF Non-Gyrator Type of Active Inductors with low area, low cost, and very low power, capable of covering the whole WMTS, and ISM, band and intended for biomedical applications. The proposed circuit is based on a floating capacitor connected between two controlled current sources. The first current source, which is controlled by the circuit input voltage, has two objectives: supply current to the capacitor (

Twenty-eight years of Aedes albopictus in Brazil: a rationale to maintain active entomological and epidemiological surveillance

INTRODUCTION: Aedes albopictus was first detected in Brazil in 1986. This mosquito species presents a major threat to public health because Brazilian populations have shown substantial vector competence for arboviruses such as dengue and chikungunya. METHODS: We updated the records of Ae. albopictus in several States of Brazil, focusing on areas in which its presence had been reported after 2002. RESULTS: Twenty-eight years after its arrival in Brazil, Ae. albopictus has been detected in 24 of 27 States. CONCLUSIONS: The rapid spread of this species and its high vector competence demonstrate the danger of Ae. albopictus in Brazil.

Opportunistic infections among individuals with HIV-1/AIDS in the highly active antiretroviral therapy era at a Quaternary Level Care Teaching Hospital

INTRODUCTION : In this study, clinical-laboratory and epidemiological characteristics are described for a group of 700 individuals with HIV (human immunodeficiency virus)/AIDS (acquired immunodeficiency syndrome) in the ART (antiretroviral therapy) era at a teaching hospital that provides a quaternary level of care, with an emphasis on opportunistic infections (OIs), co-infections and immune profile. METHODS : A retrospective cross-sectional study of AIDS cases was conducted from 1998 to 2008 by reviewing medical records from the Base Hospital/FUNFARME (Fundação Faculdade Regional de Medicina), São José do Rio Preto, São Paulo, Brazil. RESULTS: The individuals were 14 to 75 years of age, and 458 were males. Heterosexuals accounted for 31.1% of all patients. Eighty-three percent were on ART, and 33.8% of those presented difficulties with treatment adherence. OIs were analyzed from medical records, and Pneumocystis jiroveci pneumonia was the most prevalent, regardless of the LTCD4+ (TCD4+ Lymphocytes) levels. Individuals whose viral loads were ≥10,000 showed a 90% greater chance of neurotoxoplasmosis. For P. jiroveci pneumonia, neurotoxoplasmosis, esophageal candidiasis, pulmonary tuberculosis and neurocryptococcosis, the chances of infection were higher among patients with LTCD4+ levels below 200 cells/mm3. HIV/hepatitis C virus (HCV) and HIV/hepatitis B virus (HBV) co-infections were significantly associated with death. CONCLUSIONS : OIs remain frequent in the ART era even in populations where the access to medical care is considered satisfactory.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.

New strategies for active finding of leprosy cases in the Amazonian region

AbstractINTRODUCTION: The use of the Self-Image Form (SIF) expands the identification of active leprosy cases to neighbors of index cases.METHODS: The SIF was used to screen two groups: case (neighbors of index cases of leprosy) and control (individuals residing next to houses without leprosy) group. A specialist investigated suspected leprosy cases for disease confirmation.RESULTS: New cases of leprosy were diagnosed in the case group (n = 7, 8.6%), but not the control group.CONCLUSIONS: The new surveillance strategy is inexpensive, efficient, and feasible within a primary health strategy. Future studies can help improve the use of the SIF.

Hybrid investment strategy active portfolio management – US stock market

This thesis aims to develop an alternative active managed portfolio strategy based on companies‟ Fundamental and Technical Analysis and analyze its finals results. There is a big distinction between the two approaches and the main objective is to understand if it is possible to take advantage of both. With this in mind a Hybrid investment strategy for the US stock market, due to its dimension and liquidity, which was able to outperform the S&P 500 index, the benchmark, during both Bear and Bull Markets between 2000 and 2015.

Three-phase current-source shunt active power filter with solar photovoltaic grid interface

This paper presents the proposal of a three phase current source shunt active power filter (CS-SAPF) with photovoltaic grid interface. The proposed system combines the compensation of reactive power and harmonics with the injection of energy from a solar photovoltaic array into the electrical power grid. The proposed equipment presents the advantage of giving good use to the current source inverter, even when the solar photovoltaic array is not producing energy. The paper describes the control system of the CS SAPF, the energy injection control strategy, and the current harmonics and power factor compensation strategy. Simulation results to assess the performance of the proposed system are also presented.

The economic assessment of health benefits of active transport

Purpose:This chapter addresses the economic assessment of health benefits of active transport and presents most recent valuation studies with an overview of progresses made towards the inclusion of health benefits in the cost-benefit analysis (CBA) of active transport. Methodology/approach: It is built upon the contracted study for the World Health Organization (WHO) on the economic appraisal of health benefits of walking and cycling investments at the city of Viana do Castelo, the former pilot study in Portugal for evaluating the health benefits of non-motorized transport using the WHO Health Economic Assessment Tool (HEAT). The relative risk values adopted in the HEAT for walking refer to adult population of the age group 20â 74 years and the assessment focus in on average physical activity/regular behaviour of groups of pedestrians and all-cause mortality health impacts. During the case study, it was developed and implemented a mobility survey which aimed to collect behavioural data before and after a street intervention in the historic centre. Findings: Most recent appraisal guidance of walking and cycling and health impact modelling studies reviewed confirm that further research is expected before a more comprehensive appraisal procedure can be adopted in Europe, able to integrate physical activity effects along with other health risks such as those related to road traffic injuries and exposure to air pollution. Social implications: The health benefits assessment of walking investments helped local decision-makers to progress towards sustainable mobility options in the city. Making the population aware of the potential health benefits of regular walking can encourage more people to uptake active transport as part of their daily activities. Originality/value: This study provides a useful review of the health benefits of active transport with a comprehensive analysis of valuation studies, presenting value-added information. It then reports a former assessment of the health effects of active transport in the Portuguese context (case study) using the state-of-the-art economic analysis tool (HEAT) of the World Health Organization which is believed to contribute to a paradigm shift in the transport policy and appraisal practice given the need of shaping future cities (and their citizens) for health through more investments in active transport.

Implementation and comparison of different switching techniques for shunt active power filters

This paper presents a comparison between three switching techniques that can be used in three-phase four-wire Shunt Active Power Filters (SAPFs). The implemented switching techniques are: Periodic-Sampling (PS), Triangular Carrier Pulse-Width Modulation (TC-PWM) and Space Vector PWM (SVPWM). The comparison between them is made in terms of the compensated currents THD%, implementation complexity, necessary CPU time and SAPF efficiency. To perform this comparison are presented and analyzed several experimental results, obtained with a 20 kVA Shunt Active Power Filter prototype, specially developed for this purpose. The control system of the developed SAPF is based in the p-q Theory with a grid synchronization algorithm p-PLL.

Piezoelectric poly(vinylidene fluoride) microstructure and poling state in active tissue engineering

Tissue engineering often rely on scaffolds for supporting cell differentiation and growth. Novel paradigms for tissue engineering include the need of active or smart scaffolds in order to properly regenerate specific tissues. In particular, as electrical and electromechanical clues are among the most relevant ones in determining tissue functionality in tissues such as muscle and bone, among others, electroactive materials and, in particular, piezoelectric ones, show strong potential for novel tissue engineering strategies, in particular taking also into account the existence of these phenomena within some specific tissues, indicating their requirement also during tissue regeneration. This referee reports on piezoelectric materials used for tissue engineering applications. The most used materials for tissue engineering strategies are reported together with the main achievements, challenges and future needs for research and actual therapies. This review provides thus a compilation of the most relevant results and strategies and a start point for novel research pathways in the most relevant and challenging open questions.

Designing cnc knit for hybrid membrane and bending active structures

Recent advances in computation allow for the integration of design and simulation of highly interrelated systems, such as hybrids of structural membranes and bending active elements. The engaged complexities of forces and logistics can be mediated through the development of materials with project specific properties and detailing. CNC knitting with high tenacity yarn enables this practice and offers an alternative to current woven membranes. The design and fabrication of an 8m high fabric tower through an interdisciplinary team of architects, structural and textile engineers, allowed to investigate means to design, specify, make and test CNC knit as material for hybrid structures in architectural scale. This paper shares the developed process, identifies challenges, potentials and future work.

Active magneto-optical control of spontaneous emission in graphene

We investigate the spontaneous emission rate of a two-level quantum emitter near a graphene-coated substrate under the influence of an external magnetic field or strain induced pseudo-magnetic field. We demonstrate that the application of the magnetic field can substantially increase or decrease the decay rate. We show that a suppression as large as 99$\%$ in the Purcell factor is achieved even for moderate magnetic fields. The emitter's lifetime is a discontinuous function of $|{\bf B}|$, which is a direct consequence of the occurrence of discrete Landau levels in graphene. We demonstrate that, in the near-field regime, the magnetic field enables an unprecedented control of the decay pathways into which the photon/polariton can be emitted. Our findings strongly suggest that a magnetic field could act as an efficient agent for on-demand, active control of light-matter interactions in graphene at the quantum level.