Characterization of thermal and mechanical properties of polypropylene-based composites for fuel cell bipolar plates and development of educational tools in hydrogen and fuel cell technologies

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi-walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbon's Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International's FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through-plane and in-plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in-plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through-plane and in-plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single-filler formulations. For thermal conductivity, Nielsen's model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen's model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

Diel variation in a dynamic sexual display and its association with female mate-searching behaviour

Dynamic sexual signals often show a diel rhythm and may vary substantially with time of day. Diel and short-term fluctuations in such sexual signals pose a puzzle for condition capture models of mate choice, which assume a female preference for male traits that reliably reflect a male's quality. Here we experimentally manipulated the food supply of individual male field crickets Gryllus campestris in their natural habitat in two consecutive seasons to determine (i) the effect of male nutritional condition on the fine-scaled variation of diel investment in acoustic signalling and (ii) the temporal association between the diel variation in male signalling and female mate-searching behaviour. Overall food-supplemented males signalled more often, but the effect was only visible during the daytime. In the evening and the night, signal output was still high but the time spent signalling was unrelated to a male's nutritional condition. Females' mate-searching behaviour also showed a diel rhythm with peak activity during the afternoon, when differences among calling males were highest, and where signal output reliably reflects male quality. These findings suggest that males differing in nutritional condition may optimize their investment in signalling in relation to time of day as to maximize mating success.

Processing and mechanical properties of cast aluminum containing scandium, zirconium, and ytterbium

A series of aluminum alloys containing additions of scandium, zirconium, and ytterbium were cast to evaluate the effect of partial ytterbium substitution for scandium on tensile behavior. Due to the high price of scandium, a crucible-melt interaction study was performed to ensure no scandium was lost in graphite, alumina, magnesia, or zirconia crucibles after holding a liquid Al-Sc master alloy for 8 hours at 900 °C in an argon atmosphere. The alloys were subjected to an isochronal aging treatment and tested for conductivity and Vickers microhardness after each increment. For scandium-containing alloys, peak hardnesses of 520-790 MPa, and peak tensile stresses of 138-234 MPa were observed after aging from 150-350 °C for 3 hours in increments of 50 °C, and for alloys without scandium, peak hardnesses of 217-335 MPa and peak tensile stresses of 45-63 MPa were observed after a 3 hour, 150 °C aging treatment. The hardness and tensile strength of the ytterbium containing alloy was found to be lower than in the alloy with no ytterbium substitution.

Self-reported alcohol consumption and its association with adherence and outcome of antiretroviral therapy in the Swiss HIV Cohort Study

BACKGROUND: Alcohol consumption leading to morbidity and mortality affects HIV-infected individuals. Here, we aimed to study self-reported alcohol consumption and to determine its association with adherence to antiretroviral therapy (ART) and HIV surrogate markers. METHODS: Cross-sectional data on daily alcohol consumption from August 2005 to August 2007 were analysed and categorized according to the World Health Organization definition (light, moderate or severe health risk). Multivariate logistic regression models and Pearson's chi(2) statistics were used to test the influence of alcohol use on endpoints. RESULTS: Of 6,323 individuals, 52.3% consumed alcohol less than once a week in the past 6 months. Alcohol intake was deemed light in 39.9%, moderate in 5.0% and severe in 2.8%. Higher alcohol consumption was significantly associated with older age, less education, injection drug use, being in a drug maintenance programme, psychiatric treatment, hepatitis C virus coinfection and with a longer time since diagnosis of HIV. Lower alcohol consumption was found in males, non-Caucasians, individuals currently on ART and those with more ART experience. In patients on ART (n=4,519), missed doses and alcohol consumption were positively correlated (P<0.001). Severe alcohol consumers, who were pretreated with ART, were more often off treatment despite having CD4+ T-cell count <200 cells/microl; however, severe alcohol consumption per se did not delay starting ART. In treated individuals, alcohol consumption was not associated with worse HIV surrogate markers. CONCLUSIONS: Higher alcohol consumption in HIV-infected individuals was associated with several psychosocial and demographic factors, non-adherence to ART and, in pretreated individuals, being off treatment despite low CD4+ T-cell counts.

Safety climate and its association with office type and team involvement in primary care

OBJECTIVE To assess differences in safety climate perceptions between occupational groups and types of office organization in primary care. METHODS Primary care physicians and nurses working in outpatient offices were surveyed about safety climate. Explorative factor analysis was performed to determine the factorial structure. Differences in mean climate scores between staff groups and types of office were tested. Logistic regression analysis was conducted to determine predictors for a 'favorable' safety climate. RESULTS 630 individuals returned the survey (response rate, 50%). Differences between occupational groups were observed in the means of the 'team-based error prevention'-scale (physician 4.0 vs. nurse 3.8, P < 0.001). Medical centers scored higher compared with single-handed offices and joint practices on the 'team-based error prevention'-scale (4.3 vs. 3.8 vs. 3.9, P < 0.001) but less favorable on the 'rules and risks'-scale (3.5 vs. 3.9 vs. 3.7, P < 0.001). Characteristics on the individual and office level predicted favorable 'team-based error prevention'-scores. Physicians (OR = 0.4, P = 0.01) and less experienced staff (OR 0.52, P = 0.04) were less likely to provide favorable scores. Individuals working at medical centers were more likely to provide positive scores compared with single-handed offices (OR 3.33, P = 0.001). The largest positive effect was associated with at least monthly team meetings (OR 6.2, P < 0.001) and participation in quality circles (OR 4.49, P < 0.001). CONCLUSIONS Results indicate that frequent quality circle participation and team meetings involving all team members are effective ways to strengthen safety climate in terms of team-based strategies and activities in error prevention.

Microstructural and mechanical characterization of contemporary lingual orthodontic brackets.

OBJECTIVES To investigate the composition and the microstructural and mechanical characterization of three different types of lingual brackets. MATERIALS AND METHODS Incognito™ (3M Unitek), In-Ovation L (DENTSPLY GAC) and STb™ (Light Lingual System, ORMCO) lingual brackets were studied under the scanning electron microscope employing backscattered electron imaging and their elemental composition was analysed by energy-dispersive X-ray microanalysis. Additionally, Vickers hardness was assessed using a universal hardness-testing machine, and the indentation modulus was measured according to instrumented indentation test. Two-way analysis of variance was conducted employing bracket type and location (base and wing) as discriminating variable. Significant differences among groups were allocated by post hoc Student-Newman-Keuls multiple comparison analysis at 95% level of significance. RESULTS Three different phases were identified for Incognito and In-Ovation L bracket based on mean atomic number contrast. On the contrary, STb did not show mean atomic contrast areas and thus it is recognized as a single phase. Incognito is a one-piece bracket with the same structure in wing and base regions. Incognito consists mainly of noble metals while In-Ovation L and STb show similar formulations of ferrous alloys in wing and base regions. No significant differences were found between ferrous brackets in hardness and modulus values, but there were significant differences between wing and base regions. Incognito illustrated intermediate values with significant differences from base and wing values of ferrous brackets. CONCLUSIONS/IMPLICATIONS Significant differences exist in microstructure, elemental composition, and mechanical properties among the brackets tested; these might have a series of clinical implications during mechanotherapy.

Self-reported attenuated psychotic-like experiences in help-seeking adolescents and their association with age, functioning and psychopathology

OBJECTIVE Self-rated attenuated psychotic-like experiences (APLEs) are increasingly used to screen for ultra-high-risk (UHR) across all ages. However, self-rated psychotic-like experiences (PLEs), in particular perception-related ones, were more frequent in children and adolescents, in which they possessed less clinical significance. We therefore explored the prevalence of different factors of APLEs in help-seeking adolescents, and their relationship with age, functioning and psychopathology METHOD As a part of the "Liberiamo il Futuro" project, help-seeking adolescents (N=171; 11-18years, 53% male) were screened with the 92-item Prodromal Questionnaire (PQ-92). A factor analysis was performed on the PQ-92 positive items (i.e., APLEs) to identify different APLE-factors. These were assessed for their association with age, functioning and psychopathology using regression analyses. RESULTS APLEs were very common in help-seeking adolescents, and formed four factors: "Conceptual Disorganization and Suspiciousness", "Perceptual Abnormalities", "Bizarre Experiences", and "Magical Ideation". Associations with age and functioning but not psychopathology were found for "Perceptual Abnormalities" that was significantly more severe in 11-12-year-olds, while "Conceptual Disorganization and Suspiciousness" was significantly related to psychopathology. CONCLUSION In line with findings on PLEs, prevalence and clinical significance of APLEs, especially perception-related ones, might depend on age and thus neurodevelopmental stage, and may fall within the normal spectrum of experience during childhood. This should be considered when screening for UHR status in younger age groups

The Parables and Similes of the Rabbis agricultural and pastoral

Asher Feldman

Glomerular filtration rate, urine production, and fractional clearance of electrolytes in acute kidney injury in dogs and their association with survival.

BACKGROUND Acute kidney injury (AKI) is common in dogs. Few studies have assessed sequential changes in indices of kidney function in dogs with naturally occurring AKI. OBJECTIVE To document sequential changes of conventional indices of renal function, to better define the course of AKI, and to identify a candidate marker for recovery. ANIMALS Ten dogs with AKI. METHODS Dogs were prospectively enrolled and divided into surviving and nonsurviving dogs. Urine production was measured with a closed system for 7 days. One and 24-hour urinary clearances were performed daily to estimate solute excretion and glomerular filtration rate (GFR). Solute excretion was calculated as an excretion ratio (ER) and fractional clearance (FC) based on both the 1- and 24-hour urine collections. RESULTS Four dogs survived and 6 died. At presentation, GFR was not significantly different between the outcome groups, but significantly (P = .03) increased over time in the surviving, but not in the nonsurviving dogs. Fractional clearance of Na decreased significantly over time (20.2-9.4%, P < .0001) in the surviving, but not in the nonsurviving dogs. The ER and FC of solutes were highly correlated (r, 0.70-0.95). CONCLUSION AND CLINICAL IMPACT Excretion ratio might be used in the clinical setting as a surrogate marker to follow trends in solute excretion. Increased GFR, urine production, and decreased FC of Na were markers of renal recovery. The FC of Na is a simple, noninvasive, and cost-effective method that can be used to evaluate recovery of renal function.

Radiographic volume analysis as a novel tool to determine nasopalatine duct cyst dimensions and its association with presenting symptoms and postoperative complications

OBJECTIVES The aims of the study were to use cone beam computed tomography (CBCT) images of nasopalatine duct cysts (NPDC) and to calculate the diameter, surface area, and 3D-volume using a custom-made software program. Furthermore, any associations of dimensions of NPDC with age, gender, presence/absence of maxillary incisors/canines (MI/MC), endodontic treatment of MI/MC, presenting symptoms, and postoperative complications were evaluated. MATERIAL AND METHODS The study comprised 40 patients with a histopathologically confirmed NPDC. On preoperative CBCT scans, curves delineating the cystic borders were drawn in all planes and the widest diameter (in millimeter), surface area (in square millimeter), and volume (in cubic millimeter) were calculated. RESULTS The overall mean cyst diameter was 15 mm (range 7-47 mm), the mean cyst surface area 566 mm(2) (84-4,516 mm(2)), and the mean cyst volume 1,735 mm(3) (65-25,350 mm(3)). For 22 randomly allocated cases, a second measurement resulted in a mean absolute aberration of ±4.2 % for the volume, ±2.8 % for the surface, and ±4.9 % for the diameter. A statistically significant association was found for the CBCT determined cyst measurements and the need for preoperative endodontic treatment to MI/MC and for postoperative complications. CONCLUSION In the hands of a single experienced operator, the novel software exhibited high repeatability for measurements of cyst dimensions. Further studies are needed to assess the application of this tool for dimensional analysis of different jaw cysts and lesions including treatment planning. CLINICAL RELEVANCE Accurate radiographic information of the bone volume lost (osteolysis) due to expansion of a cystic lesion in three dimensions could help in personalized treatment planning.