Executive Managers in Peru's Family Businesses

As in many other developing countries, family businesses are major players in the Peruvian economy. Despite their growth into large-scale groups spanning a wide range of businesses, the owner families still have strong control over their ownership and management. However, Peru's liberal economic reforms in the 1990s brought intense competition into the national market. Not only have these family businesses been forced to compete against large-scale foreign capital that entered the national market through the privatization of state enterprises, but also against cheap goods imported from foreign countries. In order to compete, family businesses have had to move beyond the limited human resources available within the family. The advancement within owner families of new generations with better education and training together with the promotion to top managerial positions of professional salaried managers from outside the family are some of the measures owner families are taking to overcome their human resource limitations.

Unlocking the Potential of Zambian Micro, Small and Medium Enterprises "Learning from the international best practices - the Southeast Asian Experience"

This paper examines the SMEs performance in Zambia and attempts to identify some practical lessons that Zambia can learn from Southeast Asian countries (with reference to Malaysia) in order to facilitate industrial development through unlocking the potential of its SMEs sector. Malaysia and Zambia were at the same level of economic development as evidenced by similar per capita incomes but Zambia has remained behind economically and its manufacturing sector has stagnated as if both countries did not have similar initial endowments. It therefore, becomes imperative that Zambia learns from such countries on how they managed to take-off economically with a focus on SME development. Training (education), research & development, market availability and technological advancement through establishment of industrial linkages coupled with cluster formation were some of the outstanding strategies identified that Zambia could use as a “key” to unlock its SMEs’ potential as it strives to meet the UN MDGs in particular halving its poverty levels by 2015 and also realizing its vision of becoming a middle income earner by 2030.

Linked versus Non-linked Firms in Innovation: The Effects of Economies of Network in Agglomeration in East Asia

This paper proposes a new mechanism linking innovation and network in developing economies to detect explicit production and information linkages and investigates the testable implications of these linkages using survey data gathered from manufacturing firms in East Asia. We found that firms with more information linkages tend to innovate more, have a higher probability of introducing new goods, introducing new goods to new markets using new technologies, and finding new partners located in remote areas. We also found that firms that dispatched engineers to customers achieved more innovations than firms that did not. These findings support the hypothesis that production linkages and face‐to‐face communication encourage product and process innovation.

Location choice of multinational enterprises in China : comparison between Japan and Taiwan

This paper examines and compares the location choice of Japanese and Taiwanese MNEs in China. Furthermore, we investigate the relationship between location choice and firm characteristics, specifically firms' productivity. Due to Taiwan's linguistic and cultural advantages in China, it is expected that the location choice mechanics are different between Japanese and Taiwanese MNEs. As a result, our main findings are that, while the less productive Japanese firms prefer a location in an area with a larger agglomeration of Japanese affiliates or in an area closer to Japan, the more productive Taiwanese firms prefer a location in an area with a larger agglomeration of Taiwanese affiliates or in an area closer to Taiwan.

Transport modal choice by multinational firms : firm-level evidence from Southeast Asia

We examine transport modal decision by multinational firms to shed light on the role of freight logistics in multinational activity. Using a firm-level survey in Southeast Asia, we show that foreign ownership has a significantly positive and quantitatively large impact on the likelihood that air/sea transportation is chosen relative to truck shipping. This result is robust to the shipping distance, cross-border freight, and transport infrastructure. Both foreign-owned exporters and importers also tend to use air/sea transportation. Thus, our analysis presents a new distinction between multinational and domestic firms in their decision over transport modes.

Multiplant strategy under core-periphery structure

A typical implicit assumption on monopolistic competition models for trade and economic geography is that firms can produce and sell only at one place. This paper fallows endogenous determination of the number of plants in a new economic geography model and examine the stable outcomes of organization choice between single-plant and multi-plant in two regions. We explicitly consider the firms' trade-off between larger economies of scale under single plant configuration and the saving in interregional transport costs under multi-plant configuration. We show that organization change arises under decreasing transportation costs and observe several organization configurations under a generalized cost function.

The Analysis of Airline Business Models in the Development of Possible Future Business Options

Innovations in the current interconnected world of organizations have lead to a focus on business models as a fundamental statement of direction and identity. Although industry transformations generally emanate from technological changes, recent examples suggest they may also be due to the introduction of new business models. In the past, different types of airline business models could be clearly separated from each other. However, this has changed in recent years partly due to the concentration process and partly to reaction caused by competitive pressure. At least it can be concluded that in future the distinction of different business models will remain less clear. To advance the use of business models as a concept, it is essential to be able to compare and perform analyses to identify the business models that may have the highest potential. This can essentially contribute to understanding the synergies and incompatibilities in the case of two airlines that are going in for a merger. This is illustrated by the example of Swiss Air-Lufthansa merger analysis. The idea is to develop quantitative methods and tools for comparing and analyzing Aeronautical/Airline business models. The paper identifies available methods of comparing airline business models and lays the ground work for a quantitative model of comparing airline business models. This can be a useful tool for business model analysis when two airlines are merged

Identifying the core competence as a key requirement for business model innovation. The case of Airlines as a service industry

Core competencies form the basis of an organization’s skills and the basic element of a successful strategic execution. Identifying and strengthening the core competencies enhances flexibility thereby strategically positioning a firm for responding to competition in the dynamic marketplace and can be the difference in quality among firms that follow the same business model. A correct understanding of the concept of business models, employing the right core competencies, organizing them effectively and building the business model around the competencies that are constantly gained and assimilated can result in enhanced business performance and thus having implications for firms that want to innovate their business models. Flexibility can be the firm’s agility to shift focus in response to external factors such as changing markets, new technologies or competition and a firm’s success can be gauged by the ability it displays in this transition. Although industry transformations generally emanate from technological changes, recent examples suggests they may also be due to the introduction of new business models and nowhere is it more relevant than in the airline industry. An analysis of the business model flexibility of 17 Airlines from Asia, Europe and Oceania, that is done with core competence as the indicator reveals a picture of inconsistencies in the core competence strategy of certain airlines and the corresponding reduction in business performance. The performance variations are explained from a service oriented core competence strategy employed by airlines that ultimately enables them in having a flexible business model that not only increases business performance but also helps in reducing the uncertainties in the internal and external operating environments. This is more relevant in the case of airline industry, as the product (the air transportation of passengers) minus the service competence is all the same.

Equity Carve Out : desde la óptica del PMO

Un Equity Carve Out, también conocido como escisión IPO o escisión parcial de empresas, constituye un tipo de reorganización corporativa, en la que una empresa crea una nueva filial a partir de la separación de una de sus actividades, negocios o servicios. Estas operaciones empresariales actualmente constituyen unas de las prácticas más comunes usadas por las compañías para conseguir financiación. El capital entrante por la venta de parte o la totalidad de la filial, justificará por un lado el esfuerzo invertido en el proceso y por otro abrirá nuevos caminos para la empresa recién constituida. Pero la mayor parte de estos procesos son de una complejidad elevada, tanto si se ven desde la óptica externa a la empresa, como interna. Por un lado las valoraciones bursátiles, dadas las actuales circunstancias económicas, no son las mejores. Y por otro, los proyectos de escisión tienen demasiados puntos críticos para considerarlos sencillos o mecánicos de ejecución. Este documento se centrará en dar solución a la problemática interna que afrontan las empresas una vez tomada la decisión de escindir una actividad: ¿cómo gestionar el proceso? Desde la experiencia y el conocimiento empresarial, se propone como solución: un proyecto completo, coherente y estructurado de escisión; y un PMO o responsable de proyecto, para dirigirlo. Durante todo el documento se repasarán todos y cada uno de los pasos que debe tener en consideración y llevar bajo control el PMO, para acabar el equity carve out en 5 meses. Se definirá un proyecto completo describiendo los pasos necesarios para: • Construir nueva empresa y las relaciones con su ecosistema. • Definir todas las operaciones de negocio necesarias para garantizar su operatividad. • Crear las estructuras necesarias que soporten todas las operaciones y procesos. Para ello y dentro de una planificación global, se propone el trabajo diario con todos los departamentos que tengan algún tipo de involucración en el proceso: operaciones, legal, recursos humanos, financiero, fiscal, TI, marketing y comunicación y compras. Todos estos departamentos o líneas de trabajo tendrán tareas y objetivos particulares. El documento servirá de manual, para que el PMO tenga una visión cuasi-completa de lo que hay que hacer en cada momento, con qué profesionales trabajar y con qué propósito. ---ABSTRACT---An Equity Carve Out, also named as excision or partial IPO excision of companies, is a type of corporate reorganization in which a company creates a new one from the separation of one of its activities, business or services. Currently these business operations constitute one of the most common practices used by companies to get funding. The capital that comes from the sale of part or the totality of the subsidiary, justifies the effort invested in the process on one hand, and on the other opens new perspectives for the newly formed company. But most of these processes are highly complex, whether viewed from outside the company, or from inside. On one side, stock valuations, taking into account the current economic circumstances, are not the best. And on the other side, excision projects have too many critical points to consider the projects simple or mechanical. This document is focused on resolving the internal problems faced by enterprises, once the decision of spinning off the activity is taken: how to manage the process? From the experience and business knowledge, we propose as solution: a complete, coherent and structured excision project; and a PMO or Project Officer leading it. Throughout the document, each and every step that the PMO must take into consideration will be reviewed, in order to finish the equity carve-out in 5 months. A complete project will be defined by describing the steps necessary to: • Build new business and relationships with its ecosystem. • Define all business operations necessary to ensure their operability. • Create the necessary structures that support all operations and processes. Within the Global Planning, we will propose daily work with all the departments that have some sort of involvement in the process: operations, legal, human resources, financial, taxes, IT, marketing communication and purchases. All these departments or working lines have their own tasks and goals. The document could be used as a manual for the PMO in order to have a near-complete picture of what to do anytime, with what professionals he/she would work and for what purpose.

Business models in the Smart Grid: challenges, opportunities and proposals for prosumer profitability.

Considering that non-renewable energy resources are dwindling, the smart grid turns out to be one of the most promising and compelling systems for the future of energy. Not only does it combine efficient energy consumption with avant-garde technologies related to renewable energies, but it is also capable of providing several beneficial utilities, such as power monitoring and data provision. When smart grid end users turn into prosumers, they become arguably the most important value creators within the smart grid and a decisive agent of change in terms of electricity usage. There is a plethora of research and development areas related to the smart grid that can be exploited for new business opportunities, thus spawning another branch of the so-called ?green economy? focused on turning smart energy usage into a profitable business. This paper deals with emerging business models for smart grid prosumers, their strengths and weaknesses and puts forward new prosumer-oriented business models, along with their value propositions.

Modelo multidimensional de los factores que afectan la interacción entre marketing y ventas en el lanzamiento de nuevos productos en Latino América

Esta tesis se centra en la identificación y análisis de los factores que pueden favorecer o actuar como barreras del éxito de la implementación de la innovación y las relaciones entre sí, desde el enfoque de la interface marketing-ventas. El trabajo empírico se enmarca en el vacío de investigación existente en el campo del proceso de lanzamiento de nuevos productos en los mercados donde operan subsidiarias de empresas multinacionales de consumo masivo (FMCG). Las empresas FMCG son altamente dependientes de la innovación como proceso clave determinante del crecimiento competitivo de mediano y largo plazo. En un contexto de acortamiento del ciclo de vida de los productos, como resultado del desarrollo tecnológico y científico que impactan en el comportamiento de los consumidores, las empresas invierten un mayor nivel de recursos en el desarrollo de nuevos productos, reingeniería y programas de innovación (Mundra, Gulati y Gupta, 2013). Sin embargo, a pesar del aumento en la inversión, las tasas de éxito de la innovación reportadas son inferiores al 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Aumentar las tasas de éxito de los proyectos de innovación es reconocida en la literatura como un elemento clave para la supervivencia y competitividad de las empresas, para ser superiores a su competencia y desarrollar nuevos modelos de negocios. A pesar de la existencia de estudios que intentan comprender el proceso de lanzamiento de nuevos productos, no se ha identificado un claro prototipo de gestión de la innovación (Gupta et al, 2007). Profundizando en los factores de éxito, los autores Keupp, Palmié y Gassman (2012) reconocen que la innovación exitosa no depende solamente de la estrategia de selección de los proyectos de innovación, sino también la forma en que los mismos son implementados (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). Al analizar la implementación de los proyectos de lanzamiento de nuevos productos al mercado, en empresas FMCG, dicho proceso es responsabilidad principalmente de las funciones de marketing y ventas a través de la comunicación con los consumidores y los clientes respectivamente (Ernst, Hoyer y Rubsaamen, 2010). Es decir que el éxito en la implementación de la innovación requiere la gestión efectiva de la relación inter-funcional entre marketing y ventas (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). A pesar de la importancia de la integración entre marketing y ventas en la conceptualización e implementación de la innovación, este tema no ha sido estudiado en profundidad (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). En las empresas multinacionales, está demostrado que el desempeño de las subsidiarias determinan el éxito competitivo de la empresa a nivel global. El desafío de dichas subsidiarias es conjugar el desarrollo global de innovación y comunicación con las características locales de comportamiento del consumidor y el mercado. Por lo tanto, esta investigación empírica responde a la pregunta académica y de gestión acerca de cómo mejorar las tasas de éxito de lanzamiento de nuevos productos al mercado en subsidiarias de empresas de consumo masivo, desde la perspectiva de la relación entre marketing y ventas. En particular analiza cómo afectan la formalización de los procesos y los mecanismos de comunicación a la confianza interpersonal y a la efectividad de la interface marketing-ventas y dichos factores a su vez sobre la planificación integrada de la implementación de la innovación. La determinación de los factores o ítems que conforman cada uno de los constructos del proceso de ejecución de la innovación, se llevó a cabo a partir de una revisión exhaustiva del estado del arte de la literatura sobre las interfaces funcionales y el proceso de innovación. Posteriormente, los ítems seleccionados (más de 50 en total) fueron validados por referentes de marketing y ventas de Argentina y Uruguay a través de entrevistas en profundidad. A partir de los factores identificados se construyeron dos modelos teóricos: • (1) relativo a la influencia de las dimensiones de confianza interpersonal sobre la efectividad de las uniones inter-funcionales y como los mecanismos organizacionales, tales como la frecuencia y la calidad de la comunicación entre las áreas, afectan la confianza y la relación entre ellas; • (2) relativo a la dimensión planificación integrada de la implementación de la innovación, ya que durante el lanzamiento de nuevos productos al mercado, marketing y ventas utilizan procesos formales que facilitan la comunicación frecuente y efectiva, desarrollando confianza inter-personal que no solamente afecta la efectividad de su relación sino también el desarrollo de planes integrados entre ambas áreas. El estudio fue llevado a cabo en una empresa multinacional de consumo masivo que integra la lista Global 500 (Fortune, 2015), presente en todo el mundo con más de 25 marcas participantes en más de 15 categorías, implementando 150 proyectos de innovación en el último año. El grupo de subsidiarias en estudio fue reconocido a nivel mundial por su desempeño en crecimiento competitivo y su alta contribución al crecimiento total. El modelo analizado en esta tesis fue expandido al resto de América Latina, tratándose entonces de un caso ejemplar que representa una práctica de excelencia en la implementación de la innovación en subsidiarias de una empresa multinacional. La recolección de los datos fue llevado a cabo a través de un cuestionario estructurado y confidencial, enviado a la base de datos de todo el universo de directores y gerentes de marketing y ventas. El nivel de respuesta fue muy elevado (70%), logrando 152 casos válidos. El análisis de datos comprendió el análisis descriptivo de los mismos, estimación de fiabilidad y análisis factorial exploratorio a través del software SPSS v.20. El análisis factorial confirmatorio y el análisis de senderos para examinar las relaciones entre los factores se estudiaron mediante el software R (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finalmente se llevaron a cabo entrevistas en profundidad a gerentes de marketing y ventas de cada uno de los seis países con el fin de profundizar en los constructos y sus relaciones. Los resultados de los modelos demuestran que la frecuencia de comunicación impacta positivamente en la calidad de la misma, que a su vez afecta directamente la relación entre marketing y ventas. Adicionalmente, la calidad de la comunicación impacta sobre la confianza cognitiva, que a su vez se relaciona no solamente con la confianza afectiva sino también con la relación entre ambas áreas. Esto significa que para mejorar la implementación de la innovación, los gerentes deberían orientarse a reforzar la relación entre marketing y ventas facilitando la construcción de confianza interpersonal primero cognitiva y luego afectiva, incrementando la frecuencia de la comunicación que alimenta la calidad de la comunicación entre ambas áreas. A través del segundo modelo se demuestra que durante el lanzamiento de nuevos productos al mercado, marketing y ventas necesitan emplear procesos formales que faciliten la comunicación frecuente y efectiva. De esta forma se contrarresta el efecto negativo de la formalización sobre la planificación integrada entre ambas áreas. Adicionalmente, los gerentes de ambos departamentos deberían promover la construcción de confianza interpersonal, no solamente para mejorar la efectividad de la relación, sino también para desarrollar planes integrados de implementación de nuevos productos. Finalmente, se valida que la frecuencia de la comunicación, la confianza afectiva y la relación marketing-ventas, se relacionan positivamente con la planificación integrada en la implementación de la innovación. El estudio contribuye a la comprensión de los factores que las empresas pueden emplear para mejorar la relación inter-funcional entre marketing y ventas y la implementación de la innovación en empresas de consumo masivo. El aporte de esta investigación puede ser valorado de dos maneras, los aportes a la gestión y a la academia. Desde el punto de vista empresarial, provee a los líderes al frente de empresas de consumo masivo, del conocimiento sobre los factores que afectan la implementación de la innovación y en definitiva el éxito del negocio a mediano y largo plazo. Desde el punto de vista académico aporta al conocimiento del proceso de implementación de la innovación y en la efectividad de la interface marketing y ventas en un caso de buenas prácticas en el mercado de consumo masivo. A su vez incorpora por primera vez un estudio empírico en geografías emergentes capaces de recuperar el camino de crecimiento posterior a una profunda crisis económica a través de la exitosa implementación de la innovación en sus mercados. ABSTRACT This thesis is focused on the identification, analysis and relationship study of factors which may benefit or hinder the successful deployment of innovation, from a marketing-sales interface perspective. Considering the non-existent investigation dedicated to the study of new products launches into markets in which Fast Moving Consumer Goods (FMCG) companies’ subsidiaries operate, it is that this investigation has been carried out. FMCG companies rely on innovation as their key process for a competitive growth on a medium and long term basis. Nowadays, the life-cycle of products is getting shorter as a result of new technological and scientific development, having impact on consumer behavior, and therefore companies are forced to dedicating more resources to the development of new products, reengineering and innovation programs (Mundra, Gulati and Gupta, 2013). However, in spite of the investment increase, the innovation success rates have been reported to be lower than 25% (Evanschitzky, Eisend, Calantone y Jiang, 2012). Increasing success rates on innovation processes has been considered as a key element on the survival and competitiveness of companies, outperforming competitors and developing new business models. Despite new studies which try to comprehend the process of new products launch, a prototype of innovation management has not yet been identified (Gupta et al, 2007). Emphasizing on success factors, authors Keupp, Palmié and Gassman (2012) recognize that successful innovation does not solely depend on innovation processes’ selection strategy, but it is also based on the way in which these are implemented (Klein and Sorra, 1996; Repenning, 2002; Keupp, Palmié y Gassmann, 2012). While analyzing the implementation of projects for new products releases on massive consumption companies, the two departments in charge of taking this forward are marketing and sales, by focusing on communication strategies with consumers and clients respectively (Ernst, Hoyer y Rubsaamen, 2010). This means that having success on innovation implementation requires an effective management of inter-functional relationship among marketing and sales (Ernst, Hoyer y Rubsaamen, 2010; Hughes, Le Bon y Malshe, 2012). In spite of the importance on the integration between marketing and sales on the conceptualization and implementation of innovation, this subject has not been studied in depth (Hughes, Le Bon y Malshe, 2012; Keupp, Palmié y Gassmann, 2012). In multinational companies, previous research has confirmed that the performance of their subsidiaries determine the competitive success of the company on a global scale. The challenge of said subsidiaries is to conjugate the global innovation development and communication with the local consumer and market behavior. Therefore, this empirical study aims to respond to the academic and management question of how to improve the success rates of new product launches into MNE subsidiary’ markets, from a marketing-sales relationship perspective. Particularly, this investigation analyses how the formalization of products and communication mechanisms affect interpersonal trust and marketing-sales interface effectiveness and also on how these factors affect the overall planning of the implementation of innovation. The determination of which factors build the hypothesis of the innovation execution process was taken forward through an extensive research on the extant literature on functional interfaces and innovation processes. More than 50 items were selected which were in turn validated by marketing and sales referents on Uruguay and Argentina through in depth interviews. Based on the identified factors, two theoretical models were proposed: (1) Relative to the influence that interpersonal trust dimensions have on inter functional linkages effectiveness and how organizational mechanisms such as frequency and quality of communication between departments affect trust and their relationship. (2) Relative to the integrated planning and innovation implementation dimensions. Marketing and sales department use formal process thus allowing inter-personal trust, which affects positively their relationship and also enables the development of integrated planning between them. The study was performed within a massive consumption company which is part of the “Global 500” (Fortune, 2015), with subsidiaries all over the world and more than 25 participant brands in 15 categories, having implemented over 150 innovation projects in the year under study. The analyzed subsidiary group has been awarded worldwide for their performance in competitive growth and their high contribution to the total growth. The model being analyzed in this thesis was implemented throughout Latin America, representing a remarkable case of innovation implementation excellence for subsidiaries of multinational companies. Data recollection was carried out through a structured and confidential questionnaire, sent to the universe of marketing-sales directors and managers’ database available with a high level of responsiveness of 70%, resulting in 152 valid cases. Data exploration involved a descriptive analysis, followed by a reliability estimation and an exploratory factorial analysis carried out through SPSS v.20. Confirmatory factorial analysis and path analysis (to examine relations between the different study factors) were studied using “R” software (Package 2.15.1., R Core Team, 2012) (Fox, 2006). Finally, in depth interviews were carried out to several marketing and sales managers in each of the six countries so as to further confirm the hypothesis and their relations. The models results prove that communication frequency has a positive impact on the quality of the same, which in turn has direct effects on the marketing-sales relations. Additionally, communication quality has an impact on the cognitive trust, which also relates not only to affective trust, but also to the relation between both areas. This means that in order to improve the implementation of innovation, managers should strive to enforce marketing-sales relations, facilitating the interpersonal trust construction (firstly cognitive, followed by affective trust), increasing the communication frequency, and therefore nurturing the communication quality among both areas. Through the second model, the results confirm the importance of creating effective relationships between sales and marketing to facilitate planning integrated new product implementations. While formalized new product development processes provide opportunities for sales and marketing to communicate, this does not directly influence the planning of integrated new product implementations. By using these formal opportunities to communicate to create information quality, it is possible to improve sales and marketing’s ability to integrate information during the planning process. Further, communication quality creates inter-personal trust in the other party’s competences (cognitive-based trust), leading to affect-based trust. Affect-based inter-personal trust, not only to improve the overall effectiveness of the sales and marketing relationship, but also helps in planning integrated new product implementations. This study contributes to the understanding of factors which enterprises can use to improve the inter-functional relations between marketing and sales, and the implementation of innovation in FMCG companies. The contribution of this investigation can be measured in two ways: enrichment of management and contribution to the academic area. From a business perspective, it provides massive consumption businesses leaders with knowledge on which factors affect innovation implementation, which results on mid and long-term success for the company. From an academic point of view, it provides knowledge on a prototype of successful innovation implementation management based on the marketing-sales interface effectiveness through a case study in the FMCG consumption market. Last but not least, it incorporates for the first time an empiric study on emerging geographies capable of recovery post a deep economic crisis through successful innovation implementation on their markets.

Sherbrooke, Eastern Townships and Kennebec Railway, New England, 1874 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Map of the Sherbrooke, Eastern Townships and Kennebec Railway : with connections, prepared by G.W. & C.B. Colton & Co. It was published in 1874. Scale [ca. 1:1,267,200]. Covers New Hampshire, Vermont, Massachusetts, Connecticut, Rhode Island, and portions of New Jersey, Pennsylvania, New York, Maine, and the province of Quebec, Canada. The image inside the map neatline is georeferenced to the surface of the earth and fit to the USA Contiguous Albers Equal Area Conic projection (Meters). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as railroads, railroad connections and stations, drainage, state and county boundaries, and more. Includes inset: [Sherbrooke, Eastern Townships and Kennebec Railway in province of Québec]. Scale [ca. 1:921,600]. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

New England Railroads, 1874 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Railway map of the New England states : prepared expressly for the Pathfinder railway guide. It was published forThe pathfinder railway guide, Aug. 31-Sept. 6, 1874 by Geo. K. Snow. Scale not given. Covers Vermont, New Hampshire, Massachusetts, Connecticut, Rhode Island, and portions of New York, Maine, and the province of Quebec, Canada. The image inside the map neatline is georeferenced to the surface of the earth and fit to the USA Contiguous Albers Equal Area Conic projection (Meters). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows features such as railroads completed and under construction, drainage, state boundaries, and more. Relief shown by hachures. This layer is part of a selection of digitally scanned and georeferenced historic maps of New England from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.