Pattern recognition of sleep in rodents using piezoelectric signals generated by gross body movements.

Current research on sleep using experimental animals is limited by the expense and time-consuming nature of traditional EEG/EMG recordings. We present here an alternative, noninvasive approach utilizing piezoelectric films configured as highly sensitive motion detectors. These film strips attached to the floor of the rodent cage produce an electrical output in direct proportion to the distortion of the material. During sleep, movement associated with breathing is the predominant gross body movement and, thus, output from the piezoelectric transducer provided an accurate respiratory trace during sleep. During wake, respiratory movements are masked by other motor activities. An automatic pattern recognition system was developed to identify periods of sleep and wake using the piezoelectric generated signal. Due to the complex and highly variable waveforms that result from subtle postural adjustments in the animals, traditional signal analysis techniques were not sufficient for accurate classification of sleep versus wake. Therefore, a novel pattern recognition algorithm was developed that successfully distinguished sleep from wake in approximately 95% of all epochs. This algorithm may have general utility for a variety of signals in biomedical and engineering applications. This automated system for monitoring sleep is noninvasive, inexpensive, and may be useful for large-scale sleep studies including genetic approaches towards understanding sleep and sleep disorders, and the rapid screening of the efficacy of sleep or wake promoting drugs.

Mechanical and elemental characterization of solder joints and welds using a gold-palladium alloy

Purpose. This study was conducted to determine whether newer infrared or laser welding technologies created joints superior to traditional furnace or torch soldering methods of joining metals. It was designed to assess the mechanical resistance, the characteristics of the fractured surfaces, and the elemental diffusion of joints obtained by four different techniques: (1) preceramic soldering with a propane-oxygen torch, (2) postceramic soldering with a porcelain furnace, (3) preceramic and (4) postceramic soldering with an infrared heat source, and (5) laser welding. Material and methods. Mechanical resistance was determined by measuring the ultimate tensile strength of the joint and by determining their resistance to fatigue loading. Elemental diffusion to and from the joint was assessed with microprobe tracings. Scanning electron microscopy micrographs of the fractured surface were also obtained and evaluated. Results. Under monotonic tensile stress, three groups emerged: The laser welds were the strongest, the preceramic joints ranged second, and the postceramic joints were the weakest. Under fatigue stress, the order was as follows: first, the preceramic joints, and second, a group that comprised both postceramic joints and the laser welds. Inspection of the fractographs revealed several fracture modes but no consistent pattern emerged. Microprobe analyses demonstrated minor diffusion processes in the preceramic joints, whereas significant diffusion was observed in the postceramic joints. Clinical Implications. The mechanical resistance data conflicted as to the strength that could be expected of laser welded joints. On the basis of fatigue resistance of the joints, neither infrared solder joints nor laser welds were stronger than torch or furnace soldered joints.

Coloritto ([Edition augmentée de l'appendice et des 4 pl. (2 versions supplémentaires du visage de femme, accompagnées des deux palettes de couleurs correspondantes) ]) / ; or the harmony of colouring in painting : reduced to mechanical practice, under easy precepts, and infallible rules ; together with some colour'd figures, in order to render the said precepts and rules intelligible, not only to painters, but even to all lovers of painting. By J. C. Le Blon.

Ancien possesseur : Ledoux-Lebard, Guy (1912-2003)

Developmental changes in lateralized inhibition of symmetric movements in children with and without Developmental Coordination Disorder.

The present study investigates developmental changes in selective inhibition of symmetric movements with a lateralized switching task from bimanual to unimanual tapping in typically developing (TD) children and with Developmental Coordination Disorder (DCD) from 7 to 10 years old. Twelve right-handed TD children and twelve gender-matched children with DCD and probable DCD produce a motor switching task in which they have (1) to synchronize with the beat of an auditory metronome to produce bimanual symmetrical tapping and (2) to selectively inhibit their left finger's tapping while continuing their right finger's tapping and conversely. We assess (1) the development of the capacity to inhibit the stopping finger (number of supplementary taps after the stopping instruction) and (2) the development of the capacity to maintain the continuing finger (changes in the mean tempo and its variability for the continuing finger's tapping) and (3) the evolution of performance through trials. Results indicate that (1) TD children present an age-related increase in the capacity to inhibit and to maintain the left finger's tapping, (2) DCD exhibits persistent difficulties to inhibit the left finger's tapping, and (3) both groups improve their capacity to inhibit the left finger's movements through trials. In conclusion, the lateralized switching task provides a simple and fine tool to reveal differences in selective inhibition of symmetric movements in TD children and children with DCD. More theoretically, the specific improvement in selective inhibition of the left finger suggests a progressive development of inter-hemispheric communication during typical development that is absent or delayed in children with DCD.

Oscillation modes of microtubules.

Microtubules are long, filamentous protein complexes which play a central role in several cellular physiological processes, such as cell division transport and locomotion. Their mechanical properties are extremely important since they determine the biological function. In a recently published experiment [Phys. Rev. Lett. 89 (2002) 248101], microtubule's Young's and shear moduli were simultaneously measured, proving that they are highly anisotropic. Together with the known structure, this finding opens the way to better understand and predict their mechanical behavior under a particular set of conditions. In the present study, we modeled microtubules by using the finite elements method and analyzed their oscillation modes. The analysis revealed that oscillation modes involving a change in the diameter of the microtubules strongly depend on the shear modulus. In these modes, the correlation times of the movements are just slightly shorter than diffusion times of free molecules surrounding the microtubule. It could be therefore speculated that the matching of the two timescales could play a role in facilitating the interactions between microtubules and MT associated proteins, and between microtubules and tubulins themselves.

The Role of AtPHO1 in the Guard Cell Movements of Arabidopsis thaliana

In plants, stomatal opening and closing are driven by ion fluxes that cause changes in guard cell turgor and volume, a process that is in turn regulated by complex environ¬mental and hormonal signals such as light and the phytohormone abscisic acid (ABA). With this study, we present genetic evidence that stomatal movements in response to ABA are influenced by PHOl expression in guard cells of Arabidopsis thaliana. PHOl is a phosphate exporter involved in phosphate loading into the root xylem ves¬sels and, as a result, the phol mutant is characterized by low shoot phosphate lev¬els. In leaves, PHOl was found expressed at higher level in guard cells, and was quickly up-regulated following treatment with ABA. The phol mutant was unaffected in ROS production following ABA treatment, and in stomatal movements in response to different light cues, high extracellular calcium, auxin, and fusicoccin. However, stomatal movements in response to ABA treatment were severely impaired, both in terms of induction of closure and inhibition of opening. Stomatal movements in re¬sponse to hydrogen peroxide and reduced CO2 was altered as well. Micro-grafting a phol shoot scion onto wild-type root stock resulted in plants with normal shoot growth and Pi content, but failed to restore normal stomatal response to ABA treat-ment, showing that the impairment was not a simple pleiotropic consequence of phos¬phate deficiency. PHOl knockdown using RNAi specifically in guard cells of wild-type plants caused a reduced stomatal response to ABA. In agreement, specific expression of PHOl in guard cells of phol plants complemented the mutant guard cell phenotype and re-established ABA sensitivity, although full functional complementation was co- dependent on shoot Pi sufficiency. Down-regulation of PHOl in guard cells did not alter the expression of ABA marker genes, indicating that PHOl does not affect the ABA signal transduction cascade at the transcriptional level. Together, these data reveal an important role for phosphate and PHOl action in the stomatal response to ABA. Résumé L'ouverture et la fermeture des stomates des plantes sont des mouvements contrôlés par des flux d'ions causant des fluctuations de la turgescence des cellules de garde. Ce procédé est en retour régulé par des signaux environnementaux et hormonaux complexes, comme la lumière et l'hormone végétale acide abscissique (ABA). Nous présentons ici des preuves génétiques montrant que les mouvements stomatiques en réponse à l'ABA sont influencés par l'expression de PHOl dans les cellules de garde d'Arabidopsis thaliana. PHOl est un exporteur de phosphate, impliqué dans l'efflux de phosphate des cellules corticales racinaires vers les vaisseaux de xylème. En con¬séquence, le mutant phol est caractérisé par de faibles niveaux de phosphate dans les parties aériennes. Dans les feuilles, PHOl est exprimé préférentiellement dans les cellules de garde, comparé au mésophylle, et est rapidement induit par le traitement à l'ABA. Le mutant phol n'est pas affecté dans la perception de l'ABA, dans la pro¬duction de ROS en réponse à l'ABA, et dans la réponse des stomates aux traitements de lumière, à l'auxine, à la fusiccocine, et la forte concentration extracellulaire de cal¬cium. En revanche, les mouvements de stomates en réponse aux traitements à l'ABA sont fortement affectés, dans l'induction de la fermeture des stomates comme dans l'inhibition de leur ouverture. De plus, les mouvements de stomates en réponse au péroxyde d'hydrogène et à la diminution du CO2 sont aussi compromis. La création de micro-greffes composées d'une partie aérienne phol greffés sur un système racinaire sauvage génère des plantes avec une croissance et une teneur en phosphate normale, mais ne permet pas de restaurer la réponse des stomates à l'ABA, ce qui démontre que le défaut de réponse à l'ABA n'est pas une simple conséquence pléiotropique de la carence en phosphate. La répression par RNAi de l'expression de PHOl dans les stomates de plantes sauvages provoque une réduction de la réponse des stomates à l'ABA, mais n'affecte pas la réponse de gènes marqueurs à l'ABA, ce qui suggère que PHOl n'agit pas au niveau transcriptionnel. Parallèlement, l'expression de PHOl dans les cellules de gardes de mutants phol complémente le phénotype stomatique mutant et rétablit la réponse à l'ABA, bien que la totale complémentation nécessite l'apport normal de phosphate aux parties aériennes. Ensemble, ces résultats révè¬lent l'influence importante de PHOl et du phosphate dans la réponse des stomates à l'ABA.

Assessment of distribution and evolution of mechanical dyssynchrony in a porcine model of myocardial infarction by cardiovascular magnetic resonance.

BACKGROUND: We sought to investigate the relationship between infarct and dyssynchrony post- myocardial infarct (MI), in a porcine model. Mechanical dyssynchrony post-MI is associated with left ventricular (LV) remodeling and increased mortality. METHODS: Cine, gadolinium-contrast, and tagged cardiovascular magnetic resonance (CMR) were performed pre-MI, 9 ± 2 days (early post-MI), and 33 ± 10 days (late post-MI) post-MI in 6 pigs to characterize cardiac morphology, location and extent of MI, and regional mechanics. LV mechanics were assessed by circumferential strain (eC). Electro-anatomic mapping (EAM) was performed within 24 hrs of CMR and prior to sacrifice. RESULTS: Mean infarct size was 21 ± 4% of LV volume with evidence of post-MI remodeling. Global eC significantly decreased post MI (-27 ± 1.6% vs. -18 ± 2.5% (early) and -17 ± 2.7% (late), p < 0.0001) with no significant change in peri-MI and MI segments between early and late time-points. Time to peak strain (TTP) was significantly longer in MI, compared to normal and peri-MI segments, both early (440 ± 40 ms vs. 329 ± 40 ms and 332 ± 36 ms, respectively; p = 0.0002) and late post-MI (442 ± 63 ms vs. 321 ± 40 ms and 355 ± 61 ms, respectively; p = 0.012). The standard deviation of TTP in 16 segments (SD16) significantly increased post-MI: 28 ± 7 ms to 50 ± 10 ms (early, p = 0.012) to 54 ± 19 ms (late, p = 0.004), with no change between early and late post-MI time-points (p = 0.56). TTP was not related to reduction of segmental contractility. EAM revealed late electrical activation and greatly diminished conduction velocity in the infarct (5.7 ± 2.4 cm/s), when compared to peri-infarct (18.7 ± 10.3 cm/s) and remote myocardium (39 ± 20.5 cm/s). CONCLUSIONS: Mechanical dyssynchrony occurs early after MI and is the result of delayed electrical and mechanical activation in the infarct.

Measuring cytoskeleton and cellular membrane mechanical properties by atomic force microscopy.

Atomic force microscope is an invaluable device to explore living specimens at a nanometric scale. It permits to image the topography of the sample in 3D, to measure its mechanical properties and to detect the presence of specific molecules bound on its surface. Here we describe the procedure to gather such a data set on living macrophages.

Electronic couplings and on-site energies for hole transfer in DNA: systematic quantum mechanical/molecular dynamic study

The electron hole transfer (HT) properties of DNA are substantially affected by thermal fluctuations of the π stack structure. Depending on the mutual position of neighboring nucleobases, electronic coupling V may change by several orders of magnitude. In the present paper, we report the results of systematic QM/molecular dynamic (MD) calculations of the electronic couplings and on-site energies for the hole transfer. Based on 15 ns MD trajectories for several DNA oligomers, we calculate the average coupling squares 〈 V2 〉 and the energies of basepair triplets X G+ Y and X A+ Y, where X, Y=G, A, T, and C. For each of the 32 systems, 15 000 conformations separated by 1 ps are considered. The three-state generalized Mulliken-Hush method is used to derive electronic couplings for HT between neighboring basepairs. The adiabatic energies and dipole moment matrix elements are computed within the INDO/S method. We compare the rms values of V with the couplings estimated for the idealized B -DNA structure and show that in several important cases the couplings calculated for the idealized B -DNA structure are considerably underestimated. The rms values for intrastrand couplings G-G, A-A, G-A, and A-G are found to be similar, ∼0.07 eV, while the interstrand couplings are quite different. The energies of hole states G+ and A+ in the stack depend on the nature of the neighboring pairs. The X G+ Y are by 0.5 eV more stable than X A+ Y. The thermal fluctuations of the DNA structure facilitate the HT process from guanine to adenine. The tabulated couplings and on-site energies can be used as reference parameters in theoretical and computational studies of HT processes in DNA