Effect of acid or alkaline catalyst and of different capping agents on the optical properties of CdS nanoparticles incorporated within a diureasil hybrid matrix

CdS nanoparticles (NPs) were synthesized using colloidal methods and incorporated within a diureasil hybrid matrix. The surface capping of the CdS NPs by 3-mercaptopropyltrimethoxysilane (MPTMS) and 3-aminopropyltrimethoxysilane (APTMS) organic ligands during the incorporation of the NPs within the hybrid matrix has been investigated. The matrix is based on poly(ethylene oxide)/poly(propylene oxide) chains grafted to a siliceous skeleton through urea bonds and was produced by sol–gel process. Both alkaline and acidic catalysis of the sol–gel reaction were used to evaluate the effect of each organic ligand on the optical properties of the CdS NPs. The hybrid materials were characterized by absorption, steady-state and time-resolved photoluminescence spectroscopy and High Resolution Transmission Electron Microscopy (HR-TEM). The preservation of the optical properties of the CdS NPs within the diureasil hybrids was dependent on the experimental conditions used. Both organic ligands (APTMS and MPTMS) demonstrated to be crucial in avoiding the increase of size distribution and clustering of the NPs within the hybrid matrix. The use of organic ligands was also shown to influence the level of interaction between the hybrid host and the CdS NPs. The CdS NPs showed large Stokes shifts and long average lifetimes, both in colloidal solution and in the xerogels, due to the origin of the PL emission in surface states. The CdS NPs capped with MPTMS have lower PL lifetimes compared to the other xerogel samples but still larger than the CdS NPs in the original colloidal solution. An increase in PL lifetimes of the NPs after their incorporation within the hybrid matrix is related to interaction between the NPs and the hybrid host matrix.

Pseudofermion dynamical theory for the spin dynamical correlation functions of the half-filled 1D Hubbard model

A modified version of the metallic-phase pseudofermion dynamical theory (PDT) of the 1D Hubbard model is introduced for the spin dynamical correlation functions of the half-filled 1D Hubbard model Mott– Hubbard phase. The Mott–Hubbard insulator phase PDT is applied to the study of the model longitudinal and transverse spin dynamical structure factors at finite magnetic field h, focusing in particular on the sin- gularities at excitation energies in the vicinity of the lower thresholds. The relation of our theoretical results to both condensed-matter and ultra-cold atom systems is discussed.

Biological behaviour of thin films consisting of Au nanoparticles dispersed in a TiO2 dielectric matrix

In this work it was studied the possible use of thin films, composed of Au nanoparticles (NPs) embedded in a TiO2 matrix, in biological applications, by evaluating their interaction with a well-known protein, Bovine Serum Albumin (BSA), as well as with microbial cells (Candida albicans). The films were produced by one-step reactive DC magnetron sputtering followed by heat-treatment. The samples revealed a composition of 8.3 at.% of Au and a stoichiometric TiO2 matrix. The annealing promoted grain size increase of the Au NPs from 3 nm (at 300 °C) to 7 nm (at 500 °C) and a progressive crystallization of the TiO2 matrix to anatase. A broad localized surface plasmon resonance (LSPR) absorption band (λ = 580–720 nm) was clearly observed in the sample annealed at 500 °C, being less intense at 300 °C. The biological tests indicated that the BSA adhesion is dependent on surface nanostructure morphology, which in turn depends on the annealing temperature that changed the roughness and wettability of the films. The Au:TiO2 thin films also induced a significant change of the microbial cell membrane integrity, and ultimately the cell viability, which in turn affected the adhesion on its surface. The microstructural changes (structure, grain size and surface morphology) of the Au:TiO2 films promoted by heat-treatment shaped the amount of BSA adhered and affected cell viability.

Acetylated bacterial cellulose coated with urinary bladder matrix as a substrate for retinal pigment epithelium

This work evaluated the effect of acetylated bacterial cellulose (ABC) substrates coated with urinary bladder matrix (UBM) on the behavior of Retinal Pigment Epithelium (RPE), as assessed by cell adhesion, proliferation and development of cell polarity exhibiting transepithelial resistance and polygonal shaped-cells with microvilli. Acetylation of bacterial cellulose (BC) generated a moderate hydrophobic surface (around 65°) while the adsorption of UBM onto these acetylated substrates did not affect significantly the surface hydrophobicity. The ABS substrates coated with UBM enabled the development of a cell phenotype closer to that of native RPE cells. These cells were able to express proteins essential for their cytoskeletal organization and metabolic function (ZO-1 and RPE65), while showing a polygonal shaped morphology with microvilli and a monolayer configuration. The coated ABC substrates were also characterized, exhibiting low swelling effect (between 1.52.0 swelling/mm3), high mechanical strength (2048 MPa) and non-pyrogenicity (2.12 EU/L). Therefore, the ABC substrates coated with UBM exhibit interesting features as potential cell carriers in RPE transplantation that ought to be further explored.

Protein-based nanodevices for therapeutic applications

Tese de Doutoramento em Biologia Molecular e Ambiental (área de especialização em Biologia Celular e Saúde).

Investigating a galactomannan gel obtained from Cassia grandis seeds as immobilizing matrix for Cramoll lectin

Characterization, with emphasis on the rheological properties, of Cassia grandis seeds galactomannan gel containing immobilized Cramoll 1,4 is presented. The gels, with and without immobilized Cramoll 1,4, were evaluated along time by rheometry, pH, color, microbial contamination and lectin hemagglutinating activity (HA). Rheological determinations confirmed the gels to be very stable up to 30 days with variations occurring after this period. Rheological data also showed that the gel/Cramoll 1,4 immobilizing matrix loses its elastic modulus substantially after 60 days. Both gels presented no microbial contamination as well as a pH close to neutral. Colorimetric parameters demonstrated the gels transparency with occasional yellowness. The opacity of the galactomannan gel did not change significantly along the study; the same did not occur for the gel with immobilized Cramoll 1,4 as a statistically significant reduction of its opacity was observed. In what concerns immobilized Cramoll 1,4HA, up to 90% of its initial HA was maintained after 20 days, with a decrease to 60% after 60 days. These results combined with the thickening and stabilizing characteristics of the galactomannan gel make this gel a promising immobilizing matrix for Cramoll 1,4 that can be further exploited for clinical and cosmetic applications.

Congestive heart failure. Correlation between functional class and systolic and diastolic functions assessed by Doppler echocardiography

OBJECTIVE: To evaluate the influence of systolic or diastolic dysfunction, or both on congestive heart failure functional class. METHODS: Thirty-six consecutive patients with a clinical diagnosis of congestive heart failure with sinus rhythm, who were seen between September and November of 1998 answered an adapted questionnaire about tolerance to physical activity for the determination of NYHA functional class. The patients were studied with transthoracic Doppler echocardiography. Two groups were compared: group 1 (19 patients in functional classes I and II) and group 2 (17 patients in functional classes III and IV). RESULTS: The average ejection fraction was significantly higher in group 1 (44.84%±8.04% vs. 32.59%±11.48% with p=0.0007). The mean ratio of the initial/final maximum diastolic filling velocity (E/A) of the left ventricle was significantly smaller in group 1 (1.07±0.72 vs. 1.98±1.49 with p=0.03). The average maximum systolic pulmonary venous velocity (S) was significantly higher in group 1 (53.53cm/s ± 12.02cm/s vs. 43.41cm/s ± 13.55cm/s with p=0.02). The mean ratio of maximum systolic/diastolic pulmonary venous velocity was significantly higher in group 1 (1.52±0.48 vs. 1.08±0.48 with p=0.01). A predominance of pseudo-normal and restrictive diastolic patterns existed in group 2 (58.83% in group 2 vs. 21.06% in group 1 with p=0.03). CONCLUSION: Both the systolic dysfunction index and the patterns of diastolic dysfunction evaluated by Doppler echocardiography worsened with the evolution of congestive heart failure.

Activity of carvacrol against Coagulase-negative Staphylococci biofilm related infections

Dissertação de mestrado em Bioengenharia

Enalapril alters the formation of the collagen matrix in spontaneously hypertensive rats

OBJECTIVE: To assess the effect of the inhibition of the angiotensin-converting enzyme on the collagen matrix (CM) of the heart of newborn spontaneously hypertensive rats (SHR) during embryonic development. METHODS: The study comprised the 2 following groups of SHR (n=5 each): treated group - rats conceived from SHR females treated with enalapril maleate (15 mg. kg-1.day-1) during gestation; and nontreated group - offspring of nontreated females. The newborns were euthanized within the first 24 hours after birth and their hearts were removed and processed for histological study. Three fields per animal were considered for computer-assisted digital analysis and determination of the volume densities (Vv) of the nuclei and CM. The images were segmented with the aid of Image Pro Plus® 4.5.029 software (Media Cybernetics). RESULTS: No difference was observed between the treated and nontreated groups in regard to body mass, cardiac mass, and the relation between cardiac and body mass. A significant reduction in the Vv[matrix] and a concomitant increase in the Vv[nuclei] were observed in the treated group as compared with those in the nontreated group. CONCLUSION: The treatment with enalapril of hypertensive rats during pregnancy alters the collagen content and structure of the myocardium of newborns.

Reducciones Jesuiticas en el Chaco, Noroeste y Sur Argentino. Emplazamiento Territorial. Desarrollo Urbano y Arquitectónico entre los siglos XVII y XVIII. Evolución, Funciones y Tipologías. Reductions in the Chaco, Argentine Northwest and South. Territorial emplazan. Architectural and Urban Development between the seventeenth and eighteenth centuries. Evolution, Functions and Typologies.

Las reducciones jesuíticas en Argentina reconocen generalmente un único aporte en la región guaraní. Pero lo cierto es que una cantidad importante de reducciones, equivalente en número con las anteriormente mencionadas, se desarrollaron en el interior del país, fundamentalmente en las regiones del Chaco, noroeste y sur argentino. Muchas de ellas reconocen hoy su continuidad en centros urbanos y otras tan sólo, y en el mejor de los casos, en vestigios arqueológicos. Se propone el análisis de este conjunto desde las primeras incursiones en "misiones volantes" en el siglo XVII hasta la expulsión de los jesuitas en 1767. También se abordarán las modalidades y procesos generadores de centros reduccionales en estas regiones y sus interrelaciones territoriales. Además se pretende analizar sus funciones y morfologías originales, su evolución, traslados y posibles transformaciones posteriores, en las etapas previas al impacto originado ante la ausencia de la Compañía de Jesús. Los resultados incluirán la interpretación de los procesos formativos, con su diversidad de casos, en escalas regionales y locales, la recopilación de cartografía regional y urbana, y la determinación de series tipológicas de formas de trazados y organizaciones de tejidos, tanto en las demarcaciones de origen como en sus remodelaciones y ensanches cuando así correspondiere.

Optimización en el cómputos de algoritmos de cuadratura para funciones especiales. Optimization of quadrature algorithms for special functions.

En nuestro proyecto anterior aproximamos el cálculo de una integral definida con integrandos de grandes variaciones funcionales. Nuestra aproximación paraleliza el algoritmo de cómputo de un método adaptivo de cuadratura, basado en reglas de Newton-Cote. Los primeros resultados obtenidos fueron comunicados en distintos congresos nacionales e internacionales; ellos nos permintieron comenzar con una tipificación de las reglas de cuadratura existentes y una clasificación de algunas funciones utilizadas como funciones de prueba. Estas tareas de clasificación y tipificación no las hemos finalizado, por lo que pretendemos darle continuidad a fin de poder informar sobre la conveniencia o no de utilizar nuestra técnica. Para llevar adelante esta tarea se buscará una base de funciones de prueba y se ampliará el espectro de reglas de cuadraturas a utilizar. Además, nos proponemos re-estructurar el cálculo de algunas rutinas que intervienen en el cómputo de la mínima energía de una molécula. Este programa ya existe en su versión secuencial y está modelizado utilizando la aproximación LCAO. El mismo obtiene resultados exitosos en cuanto a precisión, comparado con otras publicaciones internacionales similares, pero requiere de un tiempo de cálculo significativamente alto. Nuestra propuesta es paralelizar el algoritmo mencionado abordándolo al menos en dos niveles: 1- decidir si conviene distribuir el cálculo de una integral entre varios procesadores o si será mejor distribuir distintas integrales entre diferentes procesadores. Debemos recordar que en los entornos de arquitecturas paralelas basadas en redes (típicamente redes de área local, LAN) el tiempo que ocupa el envío de mensajes entre los procesadores es muy significativo medido en cantidad de operaciones de cálculo que un procesador puede completar. 2- de ser necesario, paralelizar el cálculo de integrales dobles y/o triples. Para el desarrollo de nuestra propuesta se desarrollarán heurísticas para verificar y construir modelos en los casos mencionados tendientes a mejorar las rutinas de cálculo ya conocidas. A la vez que se testearán los algoritmos con casos de prueba. La metodología a utilizar es la habitual en Cálculo Numérico. Con cada propuesta se requiere: a) Implementar un algoritmo de cálculo tratando de lograr versiones superadoras de las ya existentes. b) Realizar los ejercicios de comparación con las rutinas existentes para confirmar o desechar una mejor perfomance numérica. c) Realizar estudios teóricos de error vinculados al método y a la implementación. Se conformó un equipo interdisciplinario integrado por investigadores tanto de Ciencias de la Computación como de Matemática. Metas a alcanzar Se espera obtener una caracterización de las reglas de cuadratura según su efectividad, con funciones de comportamiento oscilatorio y con decaimiento exponencial, y desarrollar implementaciones computacionales adecuadas, optimizadas y basadas en arquitecturas paralelas.

Anatomically informed basis functions

Neuroimaging, functional image analysis, spatial model, cortical surface, spatially variable convolution