Atomic level phenomena on transition metal surfaces

In this study we discuss the atomic level phenomena on transition metal surfaces. Transition metals are widely used as catalysts in industry. Therefore, reactions occuring on transition metal surfaces have large industrial intrest. This study addresses problems in very small size and time scales, which is an important part in the overall understanding of these phenomena. The publications of this study can be roughly divided into two categories: The adsorption of an O2 molecule to a surface, and surface structures of preadsorbed atoms. These two categories complement each other, because in the realistic case there are always some preadsorbed atoms at the catalytically active surfaces. However, all transition metals have an active d-band, and this study is also a study of the in uence of the active d-band on other atoms. At the rst part of this study we discuss the adsorption and dissociation of an O2 molecule on a clean stepped palladium surface and a smooth palladium surface precovered with sulphur and oxygen atoms. We show how the reactivity of the surface against the oxygen molecule varies due to the geometry of the surface and preadsorbed atoms. We also show how the molecular orbitals of the oxygen molecule evolve when it approaches the di erent sites on the surface. In the second part we discuss the surface structures of transition metal surfaces. We study the structures that are intresting on account of the Rashba e ect and charge density waves. We also study the adsorption of suphur on a gold surface, and surface structures of it. In this study we use ab-initio based density functional theory methods to simulate the results. We also compare the results of our methods to the results obtained with the Low-Energy-Electron-Difraction method.

Uusintamurtumien ehkäisy kaatumisen aiheuttaman yläraajamurtuman kokeneilla yli 50-vuotiailla henkilöillä

Tarkoitus: Tarkoituksena oli selvittää murtumien tehostetun ehkäisyohjelman vaikutuksia yläraajamurtuman saaneiden yli 50-vuotiaiden henkilöiden elämäntapoihin, murtumien riskitekijöihin, kaatumisiin, kaatumisvammoihin ja elämänlaatuun. Aineisto: 219 yli 50-vuotiasta kotona asuvaa, kaatumisen seurauksena yläraajamurtuman saanutta henkilöä satunnaistettiin koe- (n = 105) ja kontrolliryhmiin (n = 114). Menetelmä: Koeohjelma sisälsi yksilöllisen, yhdessä lääkärin, terveydenhoitajan ja tutkittavan kanssa laaditun hoito- ja kuntoutussuunnitelman sekä kutsun murtumien ehkäisyn koulutusohjelmaan. Kontrolliryhmän tutkittavat saivat kehotuksen hakeutua murtumahoitajan ohjaukseen. Seuranta-aika oli 14 kuukautta. Tulokset analysoitiin ryhmissä tapahtuneina muutoksina alkuja loppumittausten välillä sekä ryhmien välisenä erona muutoksissa. Tulokset: Keskimääräinen luun tiheys lannerangassa lisääntyi koeryhmässä (p<0,001) ja kontrolliryhmässä (p = 0,038), ryhmien välinen ero ei ollut tilastollisesti merkitsevä (p = 0,134). Reisiluun kaulassa luun tiheys ei muuttunut kummassakaan ryhmässä. Päivittäinen kalsiumin saanti lisääntyi koeryhmässä keskimäärin 167 mg (p<0,001) ja kontrolliryhmässä 30 mg (p = 0,475), ryhmien välinen ero oli tilastollisesti merkitsevä (p = 0,031). Kala-ateriat ja päivittäinen D-vitamiinilisä sekä kenkien liukuesteiden säännöllinen käyttö liukkaalla lisääntyivät molemmissa ryhmissä, mutta ryhmien välillä ei ollut eroa. Viiteen tuolilta nousukertaan käytetty aika vähentyi koeryhmässä keskimäärin 0,49 sekuntia (p = 0,185) ja lisääntyi kontrolliryhmässä 0,39 (p = 0,475), ero ryhmien välillä oli tilastollisesti merkitsevä (p = 0,02). Kymmenen metrin kävelyssä ei tapahtunut tulosten keskiarvossa muutoksia kummassakaan ryhmässä. Ortostatismi vähentyi kontrolliryhmässä (p = 0,049), ja masentuneisuus vähentyi koeryhmässä (p = 0,041), mutta ryhmien välillä ei näissä ollut merkitsevää eroa. Osteoporoosilääkkeiden käyttö lisääntyi molemmissa ryhmissä, ryhmien välillä ei ollut eroa. Alkoholin käytössä oli vähäisiä mutta ei merkittäviä muutoksia. Muissa testatuissa muuttujissa, kuten liikunnan viikoittainen määrä, tupakointi, näkökyky, tasapaino ja elämänlaatu, ei ollut merkitseviä muutoksia ryhmissä tai ryhmien välillä. Kaatumisten (koeryhmä 33, kontrolliryhmä 35) ja murtumien (koeryhmä 5 ja kontrolliryhmä 3) määrissä ei myöskään ollut merkitseviä eroja ryhmien välillä. Johtopäätökset: Noin neljällä viidestä kaatumisen seurauksena yläraajamurtuman saaneista, yli 50 vuotta täyttäneistä henkilöistä oli alentunut luun tiheys, ja noin joka toisella oli lisääntynyt kaatumisriski. Kaatumisen riskitekijöiden kliiniset mittaukset olivat nopeita toteuttaa ja auttoivat ehkäisytoimenpiteiden suunnittelussa. Murtuman saaneet olivat motivoituneita murtumien riskitekijöiden selvittämiseen ja myös toteuttamaan annettua lääkehoitoa. Elämäntavoissa helpoimmin toteutuivat muutokset ruokailutottumuksissa. Liikuntatottumuksien muuttaminen sen sijaan onnistui melko huonosti. Ryhmien välillä oli merkitsevä ero ainoastaan kalsiumin päivittäisessä käytössä ja tuolilta nousutestissä. Murtumariskien tunnistaminen, niiden syiden selvittäminen ja toimenpiteiden käynnistäminen riskien vähentämiseksi tulisi kuulua jokaisen pienienergisen murtuman saaneen potilaan kokonaisvaltaiseen hyvään hoitoon.

Energiantuotantovaihtoehtojen vertailu, Jousenpuiston uusi asuinalue

Tämän diplomityön tavoitteena oli vertailla paikallisia energiantuotantovaihtoehtoja eri-tyisesti lämmöntuotantoon painottuen. Tarkastelu sovitettiin uuden matalaenergiarakentamista vastaavan kerrostaloasuinalueen tarpeisiin. Näkökulmana olivat sekä taloudellisuus että hiilidioksidipäästöt. Yksityiskohtaisemman tarkastelun kohteena olivat maalämpö, alueellinen biolämpölaitos sekö alueellinen pien-CHP-laitos. Perusvaihtoehtona tutkittiin kaukolämpöä. Kaikkiin vaihtoehtoihin kuului myös kapasiteetiltaan rajoitettu jäähdytys. Tulosten mukaan kokonaistaloudellisin vaihtoehto oli maalämpö yhdistettynä kaukolämpöön. Tässä vaihtoehdossa peruslämpö tuotetaan maalämmöllä, mutta huippu-lämpöön sekä käyttöveden lämmitykseen käytetään kaukolämpöä. Ratkaisulla saadaan aikaan myös päästövähennyksiä kaukolämpöön verrattuna. Tulosten mukaan pienimmät päästöt olivat pien-CHP-biovoimalaitoksella. Toisaalta nykyisillä sähkön myyntihinnoilla pienimuotoinen yhdistetty sähkön ja lämmön tuotanto ei pysty kilpailemaan kustannusrakenteensa puolesta muiden tutkittujen vaihtoehtojen kanssa.

Water distribuition characteristics and soil loss of LEPA Quad-Spray emitter nozzles

The objective of this study was to characterize water application rate, water application pattern width, flow rate, water distribution uniformity and soil loss caused by nozzles of the Low Energy Precision Aplication (LEPA) type Quad-Spray emitter. The study was carried out at the Hydraulic and Irrigation Laboratory of the Department of Engineering at the Federal University of Lavras, in Lavras, state of Minas Gerais - MG, Brazil. Twenty-two (22) LEPA Quad-Spray emitter nozzles were evaluated, with nozzle diameter ranging from 1.59 to 9.92 mm. The experimental design used was entirely randomized, with three replications.Increasing values of nozzle flow rate ranging from 77.44 up to 3,044 L h-1, were obtained with increasing nozzle diameter sizes. Application pattern width ranged from 0.56 up to 3.24m, according to nozzles diameter size. Low values of CDU (maximum of 35.73%) were observed when using the Quad-Spray nozzles. Observed average water application rates covered the range between 68.05 mm h-1 (the lowest value that was obtained with the 2.38mm nozzle) and 258.15 mm h-1 (the highest value that was observed with the 9.92 mm). Average water application rates increased in a simple non-linear function with the increase of nozzle size diameter. However, the weighted average increase in the amount of soil loss by erosion was not related to the increase of weighted average water application values.

Profile of hip arthroplasty patients in a teaching hospital

OBJECTIVE: to characterize the epidemiological profile of patients undergoing hip replacement, primary or revisional. METHODS: we conducted a retrospective, descriptive study, including hip arthroplasties performed from January 2009 to June 2012 in a Belo Horizonte teaching hospital, Minas Gerais State - MG, Brazil. Data were analyzed using descriptive statistics. RESULTS: orthopedic procedures represented 45% of the operations at the hospital in the period, 1.4% hip arthroplasties. There were 125 hip replacements, 85 total, 27 partial and 13 reviews. Among the patients, 40% were male and 60% were female. Age ranged between 20 and 102 years, mean and median of 73 and 76 years, respectively. The most frequent diagnosis (82%) was femoral neck fracture by low-energy trauma caused by falling form standing position. In 13 revision operations, 12 required removal of the prosthesis. The infectious complication led to revision in 54% of the time, followed by dislocation (15%), peri-prosthetic fracture (15%) and aseptic loosening (15%). The infection etiologic agent was identified in 43% of occasions. The average length of the prosthesis to a revision operation was eight months. CONCLUSION: patients undergoing hip arthroplasty are elderly, with femoral neck fracture caused by falling form standing position, affecting more women. The incidence of hip prosthesis loosening was 10%. The main cause of the infection was loosening. The incidence of revisional hip arthroplasty was 10% and the incidence of hospital mortality in patients undergoing hip arthroplasty was 7.2%.

Developing a non-public research software for public use

EasyLEED is a program designed for the extraction of intensity-energy spectra from low-energy electron diffraction patterns. It can be used to get information about the position of individual atoms on a surface of some substance. The goal of this thesis is to make easyLEED useful in LEED-research. It is achieved by adding new features, i.e. plotting intensity-energy spectra, setting tracking parameters and allowing exporting and importing of settings and spot location data, to the program. The detailed description of these added features and how they’re done and how they impact on the usefulness of the program in research are presented in this thesis. Improving the calculational part of the program is not discussed.

Unusual bismuth-containing surface layers of III-V compound semiconductors

The understanding and engineering of bismuth (Bi) containing semiconductor surfaces are signi cant in the development of novel semiconductor materials for electronic and optoelectronic devices such as high-e ciency solar cells, lasers and light emitting diodes. For example, a Bi surface layer can be used as a surfactant which oats on a III-V compound-semiconductor surface during the epitaxial growth of IIIV lms. This Bi surfactant layer improves the lm-growth conditions if compared to the growth without the Bi layer. Therefore, detailed knowledge of the properties of the Bi/III-V surfaces is needed. In this thesis, well-de ned surface layers containing Bi have been produced on various III-V semiconductor substrates. The properties of these Bi-induced surfaces have been measured by low-energy electron di raction (LEED), scanning-tunneling microscopy and spectroscopy (STM), and synchrotron-radiation photoelectron spectroscopy. The experimental results have been compared with theoretically calculated results to resolve the atomic structures of the studied surfaces. The main ndings of this research concern the determination of the properties of an unusual Bi-containing (2×1) surface structure, the discovery and characterization of a uniform pattern of Bi nanolines, and the optimization of the preparation conditions for this Bi-nanoline pattern.

Modelling of potentiometric ion sensors

Potentiometric ion sensors are a very important subgroup of electrochemical sensors, very attractive for practical applications due to their small size, portability, low-energy consumption, relatively low cost and not changing the sample composition. They are investigated by the researchers from many fields of science. The continuous development of this field creates the necessity for a detailed description of sensor response and the electrochemical processes important in the practical applications of ion sensors. The aim of this thesis is to present the existing models available for the description of potentiometric ion sensors as well as their applicability and limitations. This includes the description of the diffusion potential occurring at the reference electrodes. The wide range of existing models, from most idealised phase boundary models to most general models, including migration, is discussed. This work concentrates on the advanced modelling of ion sensors, namely the Nernst-Planck-Poisson (NPP) model, which is the most general of the presented models, therefore the most widely applicable. It allows the modelling of the transport processes occurring in ion sensors and generating the potentiometric response. Details of the solution of the NPP model (including the numerical methods used) are shown. The comparisons between NPP and the more idealized models are presented. The applicability of the model to describe the formation of diffusion potential in reference electrode, the lower detection limit of both ion-exchanger and neutral carrier electrodes and the effect of the complexation in the membrane are discussed. The model was applied for the description of both types of electrodes, i.e. with the inner filling solution and solidcontact electrodes. The NPP model allows the electrochemical methods other than potentiometry to be described. Application of this model in Electrochemical Impedance Spectroscopy is discussed and a possible use in chrono-potentiometry is indicated. By combining the NPP model with evolutionary algorithms, namely Hierarchical Genetic Strategy (HGS), a novel method allowing the facilitation of the design of ion sensors was created. It is described in detail in this thesis and its possible applications in the field of ion sensors are indicated. Finally, some interesting effects occurring in the ion sensors (i.e. overshot response and influence of anionic sites) as well as the possible applications of NPP in biochemistry are described.

Research and development of III-V semiconductor surfaces for improved device interfaces

This thesis is devoted to understanding and improving technologically important III-V compound semiconductor (e.g. GaAs, InAs, and InSb) surfaces and interfaces for devices. The surfaces and interfaces of crystalline III-V materials have a crucial role in the operation of field-effect-transistors (FET) and highefficiency solar-cells, for instance. However, the surfaces are also the most defective part of the semiconductor material and it is essential to decrease the amount of harmful surface or interface defects for the next-generation III-V semiconductor device applications. Any improvement in the crystal ordering at the semiconductor surface reduces the amount of defects and increases the material homogeneity. This is becoming more and more important when the semiconductor device structures decrease to atomic-scale dimensions. Toward that target, the effects of different adsorbates (i.e., Sn, In, and O) on the III-V surface structures and properties have been investigated in this work. Furthermore, novel thin-films have been synthesized, which show beneficial properties regarding the passivation of the reactive III-V surfaces. The work comprises ultra-high-vacuum (UHV) environment for the controlled fabrication of atomically ordered III-V(100) surfaces. The surface sensitive experimental methods [low energy electron diffraction (LEED), scanning tunneling microscopy/spectroscopy (STM/STS), and synchrotron radiation photoelectron spectroscopy (SRPES)] and computational density-functionaltheory (DFT) calculations are utilized for elucidating the atomic and electronic properties of the crucial III-V surfaces. The basic research results are also transferred to actual device tests by fabricating metal-oxide-semiconductor capacitors and utilizing the interface sensitive measurement techniques [capacitance voltage (CV) profiling, and photoluminescence (PL) spectroscopy] for the characterization. This part of the thesis includes the instrumentation of home-made UHV-compatible atomic-layer-deposition (ALD) reactor for growing good quality insulator layers. The results of this thesis elucidate the atomic structures of technologically promising Sn- and In-stabilized III-V compound semiconductor surfaces. It is shown that the Sn adsorbate induces an atomic structure with (1×2)/(1×4) surface symmetry which is characterized by Sn-group III dimers. Furthermore, the stability of peculiar ζa structure is demonstrated for the GaAs(100)-In surface. The beneficial effects of these surface structures regarding the crucial III-V oxide interface are demonstrated. Namely, it is found that it is possible to passivate the III-V surface by a careful atomic-scale engineering of the III-V surface prior to the gate-dielectric deposition. The thin (1×2)/(1×4)-Sn layer is found to catalyze the removal of harmful amorphous III-V oxides. Also, novel crystalline III-V-oxide structures are synthesized and it is shown that these structures improve the device characteristics. The finding of crystalline oxide structures is exploited by solving the atomic structure of InSb(100)(1×2) and elucidating the electronic structure of oxidized InSb(100) for the first time.

Comparison of Biomass Gasification Technologies for Natural Gas Substitution in Iron Ore Pelletizing Plants

The iron ore pelletizing process consumes high amounts of energy, including nonrenewable sources, such as natural gas. Due to fossil fuels scarcity and increasing concerns regarding sustainability and global warming, at least partial substitution by renewable energy seems inevitable. Gasification projects are being successfully developed in Northern Europe, and large-scale circulating fluidized bed biomass gasifiers have been commissioned in e.g. Finland. As Brazil has abundant biomass resources, biomass gasification is a promising technology in the near future. Biomasses can be converted into product gas through gasification. This work compares different technologies, e.g. air, oxygen and steam gasification, focusing on the use of the product gas in the indurating machine. The use of biosynthetic natural gas is also evaluated. Main parameters utilized to assess the suitability of product gas were adiabatic flame temperature and volumetric flow rate. It was found that low energy content product gas could be utilized in the traveling grate, but it would require burner’s to be changed. On the other hand, bio-SGN could be utilized without any adaptions. Economical assessment showed that all gasification plants are feasible for sizes greater than 60 MW. Bio-SNG production is still more expensive than natural gas in any case.

Kriteeristö energiatehokkuuden toteutumiseksi kaupungin julkisissa rakennushankkeissa

Työssä esitetään kriteeristö tehostamaan energiatehokkuuden toteutumista kaupungin julkisissa rakennushankkeissa. Kriteeristön tarkoituksena on edistää julkisen uudisrakennushankkeen energiatehokkuutta, ottaen huomioon hankkeen kokonaistaloudellisuus. Energiatehokkuutta ja kokonaistaloudellisuutta kunnallisessa rakentamisessa stimuloivat mm. kansainvälisten ja kansallisten sopimusten energiansäästötavoitteet, sekä kuntien tiukka budjettitilanne. Jotta kokonaistaloudellisuustavoitteet täyttyisivät, työssä käytettiin hyväksi elinkaariajattelutapaa. Työssä selvitettiin kirjallisuuden ja ammattilaisten haastattelujen tarjoaman tiedon pohjalta, mitkä näkökohdat vaikuttavat julkisen palvelurakennuksen energiatehokkuuteen sen elinkaaren eri vaiheissa. Hankitun tiedon avulla luotiin kaupungin rakennusinvestointien hankinnasta vastaavien tahojen käyttöön tarkoitettu kriteeristö, joka auttaa tunnistamaan ja valitsemaan energiatehokkuuden ja kokonaistaloudellisuuden kannalta parhaimmat hankkeen toteutustavat. Jatkotoimenpiteenä työssä laadittua kriteeristöä tullaan kehittämään edelleen case-kohteista saatavien kokemusten perusteella. Tutkimus osoitti, että uudisrakentamisen energiataloudellisuuden lisäksi on panostettava energiataloudelliseen korjausrakentamiseen, koska olemassa oleva rakennuskanta muodostaa merkittävän osan kaupungin energiankulutuksesta.

Energiatehokkuuden huomioiminen julkisissa rakennushankkeissa

Hanke tähtää Lappeenrannan julkisen rakennuskannan energiatehokkuuden ja kokonaistaloudellisuuden parantamiseen. Energiatehokkuutta ja kokonaistaloudellisuutta kunnallisessa rakentamisessa kannustavat mm. kansainvälisten ja kansallisten sopimusten energiansäästötavoitteet, sekä kuntien tiukka budjettitilanne. Hankkeen yhteydessä on laadittu arviointikriteeristö rakennusinvestoinneista vastaavien viranomaisten käyttöön, mikä helpottaa tunnistamaan energiatehokkaita, kokonaistaloudellisia sekä laadukasta sisäilmastoa tukevia rakennusinvestointien toteutuskäytäntöjä. Kriteeristö on suunniteltu erityisesti kasvatus- ja opetustarkoituksiin suunnattuja rakennuksia varten. Jotta kokonaistaloudellisuustavoitteet täyttyisivät, työssä käytettiin hyväksi elinkaariajattelutapaa. Kriteerit laadittiin rakennuksen kolmelle tavoitteiden toteutumisen kannalta merkittävälle elinkaaren vaiheelle, eli suunnittelu-, toteutus- ja käyttövaiheelle. Kriteeristö on laadittu kirjallisuuden ja ammattilaisten haastattelujen tarjoaman tiedon pohjalta. Laadittua kriteeristöä koekäytettiin Myllymäen päiväkoti -hankkeen yhteydessä, jotta voitaisiin tunnistaa kriteeristön kehitystarpeita. Koekäytön yhteydessä toteutettiin myös mielipidekysely, jonka avulla kerättiin kriteeristön kehitysehdotuksia rakennushankkeen eri osapuolilta. Koekäytön tarjoaman tiedon nojalla kriteeristöä jatkokehitettiin vastaamaan paremmin käytännön tarpeita. Koekäyttö kohdistui kohteen suunnitteluvaiheeseen. Hankkeessa saavutettiin asetetut tavoitteet. Voidaan kuitenkin todeta, että kriteeristön jatkokehittämistä on syytä jatkaa. Koekäytön ulottaminen toteutus ja käyttövaiheeseen on tärkeää. Kriteeristön käsittelyalueen laajentamiselle korjausrakentamiseen sekä alueellisen tarkastelutavan käyttöönotolle olisi myös tarvetta.

Ecological distribution of stream macroalgae in different spatial scales using taxonomic and morphological groups

We examined the ecological distribution of macroalgal communities in streams using species groups (taxonomic units = algal phyla, and morphological = morphological types) with similar structures and functions instead of the species themselves. The study was conducted from June to July/2007 in two drainage basins located in mid-southern region of Paraná State , Brazil. Evaluations of macroalgal communities took into consideration the following spatial scales: the drainage basin (the Pedras river and Marrecas river basins), shading regime (open and shaded stream segments), mesohabitats (riffles and pools), and microhabitats (sampling units of 0.05m2). A total of 29 taxa (23 subgeneric, one generic, and five vegetative groups) were identified. On these, 12 taxa belong to Chlorophyta, 11 to Cyanobacteria, four to Heterokontophyta, and two to Rhodophyta. The proportions of morphological types were: 24% free filaments, 17.25% mats, tufts, gelatinous colonies, and gelatinous filaments, 7% crusts. In terms of spatial scales, we observed a predominance of Chlorophyta in open stream segments and Cyanobacteria in shaded stream segments, reflecting the loss of competitive advantage of green algae in sites with low energy availability. In the mesohabitats, the morphological types recorded in pools were predominantly poorly adapted to fast currents (free filaments), while those found in riffles (mats, tufts and gelatinous filaments) were highly resistant to fast water flows. As such, the use of species groupings based on algal taxonomy associated with morphological characteristics proved to be useful to understanding the distributions of these organisms in lotic environments.

NIR-Vis Up-Conversion Luminescence in the Yb3+,Er3+ Doped Y2O2S, ZrO2, and NaYF4 Nanomaterials

Since the discovery of the up-conversion phenomenon, there has been an ever increasing interest in up-converting phosphors in which the absorption of two or more low energy photons is followed by emission of a higher energy photon. Most up-conversion luminescence materials operate by using a combination of a trivalent rare earth (lanthanide) sensitizer (e.g. Yb or Er) and an activator (e.g. Er, Ho, Tm or Pr) ion in a crystal lattice. Up-converting phosphors have a variety of potential applications as lasers and displays as well as inks for security printing (e.g. bank notes and bonds). One of the most sophisticated applications of lanthanide up-conversion luminescence is probably in medical diagnostics. However, there are some major problems in the use of photoluminescence based on the direct UV excitation in immunoassays. Human blood absorbs strongly UV radiation as well as the emission of the phosphor in the visible. A promising way to overcome the problems arising from the blood absorption is to use a long wavelength excitation and benefit from the up-conversion luminescence. Since there is practically no absorption by the whole-blood in the near IR region, it has no capability for up-conversion in the excitation wavelength region of the conventional up-converting phosphor based on the Yb3+ (sensitizer) and Er3+ (activator) combination. The aim of this work was to prepare nanocrystalline materials with high red (and green) up-conversion luminescence efficiency for use in quantitative whole-blood immunoassays. For coupling to biological compounds, nanometer-sized (crystallite size below 50 nm) up-converting phosphor particles are required. The nanocrystalline ZrO2:Yb3+,Er3+, Y2O2S:Yb3+,Er3+, NaYF4:Yb3+,Er3+ and NaRF4-NaR’F4 (R: Y, Yb, Er) materials, prepared with the combustion, sol-gel, flux, co-precipitation and solvothermal synthesis, were studied using the thermal analysis, FT-IR spectroscopy, transmission electron microscopy, EDX spectroscopy, XANES/EXAFS measurements, absorption spectroscopy, X-ray powder diffraction, as well as up-conversion and thermoluminescence spectroscopies. The effect of the impurities of the phosphors, crystallite size, as well as the crystal structure on the up-conversion luminescence intensity was analyzed. Finally, a new phenomenon, persistent up-conversion luminescence was introduced and discussed. For efficient use in bioassays, more work is needed to yield nanomaterials with smaller and more uniform crystallite sizes. Surface modifications need to be studied to improve the dispersion in water. On the other hand, further work must be carried out to optimize the persistent up-conversion luminescence of the nanomaterials to allow for their use as efficient immunoassay nanomaterials combining the advantages of both up-conversion and persistent luminescence.

Load balancing in P2P smartphone based distributed IoT systems

With the new age of Internet of Things (IoT), object of everyday such as mobile smart devices start to be equipped with cheap sensors and low energy wireless communication capability. Nowadays mobile smart devices (phones, tablets) have become an ubiquitous device with everyone having access to at least one device. There is an opportunity to build innovative applications and services by exploiting these devices’ untapped rechargeable energy, sensing and processing capabilities. In this thesis, we propose, develop, implement and evaluate LoadIoT a peer-to-peer load balancing scheme that can distribute tasks among plethora of mobile smart devices in the IoT world. We develop and demonstrate an android-based proof of concept load-balancing application. We also present a model of the system which is used to validate the efficiency of the load balancing approach under varying application scenarios. Load balancing concepts can be apply to IoT scenario linked to smart devices. It is able to reduce the traffic send to the Cloud and the energy consumption of the devices. The data acquired from the experimental outcomes enable us to determine the feasibility and cost-effectiveness of a load balanced P2P smart phone-based applications.