Monitoramento e avaliação da borracha natural crua utilizando a técnica de análise térmica dinâmico-mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização mecânica e térmica da borracha natural formulada e vulcanizada dos clones: GT 1, IAN 873, PB 235 e RRIM 600

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de clones de borracha natural crua por ensaios padrão e análise dinâmico-mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dispositivos flexíveis de monitoramento de pH e de deflexão mecânica à base de polianilina

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ventilação mecânica não-invasiva no pós-operatório de cirurgia cardíaca: atualização da literatura

Este estudo objetivou atualizar os conhecimentos em relação à utilização da ventilação mecânica não-invasiva (VMNI) no pós-operatório de cirurgia cardíaca e identificar se há indícios da superioridade de uma forma de modalidade de VMNI em relação à outra. Foi realizada revisão da literatura entre 2006 a 2011, a partir das bases de dados PubMed, SciELO e Lilacs, utilizando os descritores respiração artificial, pressão positiva contínua nas vias aéreas, ventilação com pressão positiva intermitente e cirurgia cardíaca, e seus correspondentes na língua inglesa, os quais foram pesquisados em cruzamentos. A partir dos critérios adotados, foram selecionados nove artigos, dos quais seis demonstraram aplicações de VMNI, por meio de modalidades como pressão positiva contínua nas vias aéreas, pressão positiva com dois níveis pressóricos e respiração com pressão positiva intermitente, no pós-operatório de cirurgia cardíaca, e, três realizaram comparações entre as diferentes modalidades. As modalidades de VMNI descritas na literatura foram utilizadas com resultados satisfatórios. Estudos que comparam diferentes modalidades são escassos, contudo alguns demonstraram superioridade de uma modalidade de VMNI, como é o caso da respiração com pressão positiva intermitente na reversão da hipoxemia e da pressão positiva com dois níveis pressóricos na melhora da oxigenação, da frequência respiratória e frequência cardíaca desses pacientes, em comparação a outras modalidades.

Conceitos e técnicas da mecânica estatística e termodinâmica aplicados ao estudo dos grafos aleatórios

This dissertation briefly presents the random graphs and the main quantities calculated from them. At the same time, basic thermodynamics quantities such as energy and temperature are associated with some of their characteristics. Approaches commonly used in Statistical Mechanics are employed and rules that describe a time evolution for the graphs are proposed in order to study their ergodicity and a possible thermal equilibrium between them

Resposta celular Th1 /Th2 na doença periodontal experimental, em ratos: um estudo imuno-histoquímico

Host response plays a major role in the pathogenesis of periodontal disease. Mediators such as inflammatory cytokines which are secreted during the immune response to bacterial challenges have ambiguous functions that may or may not lead to protection of the attacked tissue. In this context, experimental evidence suggests that T-helper 1 (Th-1) and T-helper 2 (Th-2) mediated responses are potentially important during the disease process. The aims of this study therefore were to further clarify the role played by Th2 cells during different time points of the active phase of periodontal disease, as well as, to investigate whether there was any evidence of a Th1 response in the periodontal disease microenvironment. Experimental periodontitis was induced in 30 Wistar male rats by placing cotton ligatures around the mandibular first molars. The rats were then randomly divided into two groups. Group1 (G1=15) and Group 2 (G2=15). In G1 the ligatures were maintained for 2 days, whereas in G2 the ligatures were left for 15 days, a time point that corresponds to the advanced stage of periodontal disease The contra-lateral teeth served as controls (no ligatures). Immunohistochemical investigation for the presence in gingival tissue of Th2 specific transcription factor (GATA3) and the subunit of the IFN-γ receptor was carried out after the disease induction period. Light microscopy analysis revealed a decrease in the expression of GATA-3 as bone loss progressed. On the other hand, although IFN-γ R1 was detected at an early stage of the active phase of disease its expression remained unaltered during the remaining period of the study. These results indicate that the Th2 response have a protective role during the pathogenesis of periodontal disease and that the progression of the periodontal disease is related with the unbalance of the responses Th1/Th2

Estudo da detecção do DNA do papiloma vírus humano (HPV) e da expressão imuno-histoquímica de proteína do ciclo celular no carcinoma epidermóide oral

Oral squamous cell carcinoma (OSCC) is the most common malignancy in oral cavity and human papillomavirus (HPV) may have an important role in its development. The aim of this experiment was to investigate the HPV DNA and viral types in 90 cases of OSCC. Moreover, a comparative analysis between the cases of OSSC with and without HPV DNA was performed by using cell cycle markers p21 and pRb in order to detect a possible correlation of these proteins and HPV infection. DNA was extracted from paraffin embedded tissue and amplified by PCR (polymerase chain reaction) with primers PCO3+ e PCO4+ for a fragment of human β-globin gene. After this procedure, PCR for HPV DNA detection was realized using a pair of generic primers GP5+ e GP6+. Immunohistochemical study was performed by streptoavidin-biotin technique and antibodies against p21 and pRb proteins were employed. Eighty-eight cases were positive for human β-globin gene and HPV DNA was found in 26 (29.5%) of then. It could not be detected significant correlation between HPV and age, sex and anatomical sites of the lesion. The most prevalent viral type was HPV 18 (80.8%). Regarding the immunohistochemical analysis, it was detected significant association between HPV presence and pRb immunoexpression (p=0,044), nevertheless, the same was not observed in relation to p21 protein (p =0,416). It can be concluded that the low detection of HPV DNA in OSCC by the present experiment suggests a possible role of the virus in the development and progression in just a subset of this disease

Caracaterização do núcleo pré-geniculado do sagüi (Callithrix jacchus) :projeção retiniana, neuroquímica e atividade celular (expressão de FOS)

In rodents, the suprachiasmatic nucleus (SCN) and the intergeniculate leaflet (IGL) are the main components of the circadian system. The SCN is considerate the site of an endogenous biological clock because can to generate rhythm and to synchronize to the environmental cues (zeitgebers) and IGL has been related as one of the main areas that modulate the action of SCN. Both receive projections of ganglion cells of retina and this projection to SCN is called retinohypothalamic tract (RHT). Moreover, the IGL is connected with SCN through of geniculohypothalamic tract (GHT). In primates (include humans) was not still demonstrated the presence of a homologous structure to the IGL. It is believed that the pregeniculate nucleus (PGN) can be the answer, but nothing it was still proven. Trying to answer that question, the objective of our study is to do a comparative analysis among PGN and IGL through of techniques immunohystochemicals, neural tracers and FOS expression after dark pulses. For this, we used as experimental model a primate of the new world, the common marmoset (Callithrix jacchus). Ours results may contribute to the elucidation of this lacuna in the circadian system once that the IGL is responsible for the transmission of nonphotic information to SCN and participate in the integration between photic and nonphotic stimulus to adjust the function of the SCN. In this way to find a same structure in primates represent an important achieve in the understanding of the biological rhythms in those animals

Caracterização mecânica e microestrutural de um aço baixo carbono microligado com estrutura multifásica

Neste trabalho foi realizada a caracterização mecânica e microestrutural de um aço microligado com estrutura multifásica. Foi aplicado tratamento térmico pré-determinado, objetivando a formação de uma microestrutura multifásica no material. Na caracterização microestrutural foram utilizados ataques químicos à base de metabissulfito de sódio e ácido pícrico, enquanto a caracterização mecânica foi realizada através de ensaios de tração. Os resultados demonstram o elevado potencial dos aços multifásicos em aplicações que necessitem de valores superiores de resistência e ductilidade, pois tanto para temperatura isotérmica de 400ºC quanto para 350ºC houve um ganho no limite de resistência à tração ficando em torno de 786MPa e 773MPa respectivamente, representando um aumento de 15,5% e 13,6% com relação ao material fornecido.

Extração e análise da fração lipídica da microalga monoraphidium sp., síntese e caracterização do seu biodiesel

The cultivation of microalgae biomass in order to produce biodiesel arises as an extremely promising aspect, in that the microalgae culture includes short cycle of reproduction, smaller areas for planting and residual biomass rich in protein content. The present dissertation evaluates the performance and features, through spectrometry in the region of infrared with transformed Fourier (FTIR) and spectrometry in the region of UVvisible (UV-Vis), of the extracted lipid material (LM) using different techniques of cell wall disruption (mechanical agitation at low and at high spin and agitation associated with cavitation). The technique of gas chromatography (GC) brought to light the success of alkaline transesterification in the conversion of oil into methyl monoesters (MME), which was also analyzed by spectroscopic techniques (FTIR, proton magnetic resonance (1H NMR) and carbon (13C NMR). Through thermogravimetric analysis (TGA) were analyzed the lipid material (LM), biodiesel and the microalgae biomass. The method which provided the best results concerning the efficiency in extraction of the LP of Monoraphidium sp. (12,51%) was by mechanical agitation at high spin (14 000 rpm), for 2 hours being the ideal time, as shown by the t test. The spectroscopic techniques (1H NMR, 13C NMR and FTIR) confirmed that the structure of methyl monoesters and the chromatographic data (CG) revealed a high content of saturated fatty acid esters (about 70%) being the major constituent eicosanoic acid (33,7%), which justifies the high thermal stability of microalgae biodiesel. The TGA also ratified the conversion rate (96%) of LM into MME, pointing out the quantitative results compatible with the values obtained through GC (about 98%) and confirmed the efficiency of the extraction methods used, showing that may be a good technique to confirm the extraction of these materials. The content of LM microalgae obtained (12,51%) indicates good potential for using such material as a raw material for biodiesel production, when compared to oil content which can be obtained from traditional oil for this use, since the productivity of microalgae per hectare is much larger and requires an extremely reduced period to renew its cultivation

Produtividade da soja e resistência mecânica à penetração do solo sob sistema plantio direto no cerrado brasileiro

A resistência mecânica à penetração do solo pode influenciar, negativamente, o crescimento radicular da soja, afetando, sobremaneira, sua produtividade. No ano agrícola 2008/2009, no município de Selvíria (MS), no Cerrado brasileiro, foi analisada a produtividade da soja, em função da resistência mecânica à penetração de um Latossolo Vermelho distroférrico, no sistema de semeadura direta. O objetivo foi selecionar, entre os atributos pesquisados do solo, aquele com a melhor correlação, linear e espacial, para explicar a variabilidade da produtividade da soja. Foi instalada uma malha geoestatística, para a coleta de dados do solo e da planta, com 120 pontos amostrais, em área de 8,34 ha e declive homogêneo de 0,055 m m-1. Dessa forma, visando-se a auxiliar futuros trabalhos voltados à agricultura de precisão, os quais venham a utilizar os mesmos atributos do presente estudo, os valores dos alcances da dependência espacial a serem empregados deverão estar compreendidos entre 38,1 m e 114,7 m. do ponto de vista linear, a resistência mecânica à penetração do solo, quando avaliada na camada 0,10-0,20 m, apresentou boa correlação exponencial inversa com a produtividade de grãos de soja. Entretanto, do ponto de vista espacial, o número de vagens por planta apresentou-se como bom indicador da produtividade de grãos de soja.

Avaliação mecânica in vitro utilizando miniplacas quadradas e retangulares do sistema 2.0 mm em fraturas da região anterior de mandíbula

The aim of this study was to comparatively evaluate the mechanical strength of squared and rectangular 2.0 mm system miniplates comparing them to the standard configuration with 2 straight miniplates in stabilizing fractures in the anterior mandible. Ninety synthetic polyurethane mandible replicas were used in mechanical test. The samples were divided into six groups of three different methods for fixation. Groups 1, 2 and 3 showed complete fractures in symphysis, characterized by a linear separation between the medial incisor, and groups 4, 5 and 6 showed complete fractures in parasymphysis with oblique design. Groups 1 and 4 were represented by the standard technique with two straight miniplates parallel to each other. Groups 2 and 5 were stabilized by squared miniplates and groups 3 and 6 were fixed by rectangular design. Each group was subjected to a mechanical test at a displacement speed of 10 mm/min on a universal testing machine, receiving linear vertical load on the region of the left first molar. The values of the maximum load and when displacements reached 5 mm were obtained and statistically analyzed by calculating the confidence interval of 95%. Fixation systems using squared (G2) and rectangular (G3) miniplates obtained similar results. No statistically significant differences with respect to the maximum load and the load at 5 mm displacement were found when compared to standard method in symphyseal fractures (G1). In parasymphysis the fixation method using squared miniplates (G5) obtained results without significant differences regarding the maximum load and the load at 5 mm when compared to the standard configuration (G4). The fixation method using rectangular miniplates (G6) showed inferior results which were statistically significant when compared to the standard configuration (G4) for parasymphysis fractures. The mechanical behavior of the fixation methods was similar, except when rectangular miniplates were used. The fixation methods showed better results with statistical significance in symphyseal fractures

Estudo da descelularização tecidual na produção de arcabouços biológicos para enxertos

The regeneration of bone defects with loss of substance remains as a therapeutic challenge in the medical field. There are basically four types of grafts: autologous, allogenic, xenogenic and isogenic. It is a consensus that autologous bone is the most suitable material for this purpose, but there are limitations to its use, especially the insufficient amount in the donor. Surveys show that the components of the extracellular matrix (ECM) are generally conserved between different species and are well tolerated even in xenogenic recipient. Thus, several studies have been conducted in the search for a replacement for autogenous bone scaffold using the technique of decellularization. To obtain these scaffolds, tissue must undergo a process of cell removal that causes minimal adverse effects on the composition, biological activity and mechanical integrity of the remaining extracellular matrix. There is not, however, a conformity among researchers about the best protocol for decellularization, since each of these treatments interfere differently in biochemical composition, ultrastructure and mechanical properties of the extracellular matrix, affecting the type of immune response to the material. Further down the arsenal of research involving decellularization bone tissue represents another obstacle to the arrival of a consensus protocol. The present study aimed to evaluate the influence of decellularization methods in the production of biological scaffolds from skeletal organs of mice, for their use for grafting. This was a laboratory study, sequenced in two distinct stages. In the first phase 12 mice hemi-calvariae were evaluated, divided into three groups (n = 4) and submitted to three different decellularization protocols (SDS [group I], trypsin [Group II], Triton X-100 [Group III]). We tried to identify the one that promotes most efficient cell removal, simultaneously to the best structural preservation of the bone extracellular matrix. Therefore, we performed quantitative analysis of the number of remaining cells and descriptive analysis of the scaffolds, made possible by microscopy. In the second stage, a study was conducted to evaluate the in vitro adhesion of mice bone marrow mesenchymal cells, cultured on these scaffolds, previously decellularized. Through manual counting of cells on scaffolds there was a complete cell removal in Group II, Group I showed a practically complete cell removal, and Group III displayed cell remains. The findings allowed us to observe a significant difference only between Groups II and III (p = 0.042). Better maintenance of the collagen structure was obtained with Triton X-100, whereas the decellularization with Trypsin was responsible for the major structural changes in the scaffolds. After culture, the adhesion of mesenchymal cells was only observed in specimens deccelularized with Trypsin. Due to the potential for total removal of cells and the ability to allow adherence of these, the protocol based on the use of Trypsin (Group II) was considered the most suitable for use in future experiments involving bone grafting decellularized scaffolds

Hiperinsuflação manual combinada com compressão torácica expiratória para redução do período de internação em UTI em pacientes críticos sob ventilação mecânica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)