Tourism life cycle, tourism competitiveness and upgrading strategies in the Caribbean

In the 1980s Butler adapted the life cycle product model to the tourism industry and created the “Tourism Area Life Cycle (TALC) model”. The model recognizes six stages in the tourism product life cycle: exploration, investment, development, consolidation, stagnation and followed, after stagnation, by decline or revitalization of the product. These six stages can in turn be regrouped into four main stages. The Butler model has been applied to more than 30 country cases with a wide degree of success. De Albuquerque and Mc Elroy (1992) applied the TALC model to 23 small Caribbean island States in the 1990s. Following De Albuquerque and Mc Elroy, the TALC is applied to the 32 member countries of the Caribbean Tourism Organization (CTO) (except for Cancun and Cozumel) to locate their positions along their tourism life-cycle in 2007. This is done using the following indicators: the evolution of the level, market share and growth rate of stay-over arrivals; the growth rate and market share of visitor expenditures per arrival and the tourism styles of the destinations, differentiating between ongoing mass tourism and niche marketing strategies and among upscale, mid-scale and low-scale destinations. Countries have pursued three broad classes of strategies over the last 15 years in order to move upward in their tourism life cycle and enhance their tourism competitiveness. There is first a strategy that continues to rely on mass-tourism to build on the comparative advantages of “sun, sand and sea”, scale economies, all-inclusive packages and large amounts of investment to move along in Stage 2 or Stage 3 (Cuba, Dominican Republic, Puerto Rico). There is a second strategy pursued mainly by very small islands that relies on developing specific niche markets to maintain tourism competitiveness through upgrading (Anguilla, Antigua and Barbuda, British Virgin Islands and Turks and Caicos), allowing them to move from Stage 2 to Stage 3 or Stage 3 to a rejuvenation stage. There is a third strategy that uses a mix of mass-tourism, niche marketing and quality upgrading either to emerge onto the intermediate stage (Trinidad and Tobago); avoid decline (Aruba, The Bahamas) or rejuvenate (Barbados, Jamaica and the United States Virgin Islands). There have been many success stories in Caribbean tourism competitiveness and further research should aim at empirically testing the determinants of tourism competitiveness for the region as a whole.

Quantification of functional abilities in Rett syndrome: a comparison between stages III and IV

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Life cycle of Cosmolaelaps jaboticabalensis (Acari: Mesostigmata: Laelapidae) on Frankliniella occidentalis (Thysanoptera: Thripidae) and two factitious food sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Impacts of urban life on water quality and fish larvae communities in two creeks of the Brazilian Amazon

Este estudo teve como objetivo investigar o impacto das atividades antropogênicas da cidade de Belém pela comparação da qualidade da água e das comunidades de larvas de peixes em dois igarapés que desembocam no rio Guamá. Um dos igarapés atravessa um subúrbio pobre e populoso de Belém, enquanto o outro é localizado em uma ilha de Belém, declarada Área de Proteção Ambiental desde 1997. Dois pontos de coletas foram definidos em cada igarapé e monitorados durante oito horas, a cada três meses e durante um ano. O igarapé em região urbana apresentou fortes alterações na qualidade da água, durante o ano todo e em todas as marés, e isto deve se essencialmente a presença de um elevado número de coliformes termotolerantes. Poucas larvas foram encontradas. A água foi considerada imprópria para uso e atividades humanas, assim como para a vida aquática. O igarapé da ilha apresentou primeiros sinais de contaminação por nutrientes e bactéria durante o período chuvoso, parcialmente decorrente de fontes de poluição difusa. Em ambos os córregos, as comunidades larvais foram quase exclusivamente compostas de clupeiformes. Todos os estágios de desenvolvimento larval foram encontrados. Densidades e proporções mais elevadas de larvas recém eclodidas foram registradas durante a estação seca e associadas à presença de nitrato. Resultados apontam a necessidade de desenvolver um sistema de drenagem urbano para esgoto e água pluvial na maior brevidade, e recomenda um estudo de monitoramento integrado do igarapé na Área de Proteção Ambiental.

Immature stages of Calycopis bellera (Hewitson) and C-janeirica (Felder) (Lepidoptera, Lycaenidae, Theclinae, Eumaeini): Taxonomic significance and new evidence for detritivory

Details of egg, larval, and pupal morphology are described and illustrated for Calycopis bellera (Hewitson) and C. janeirica (Felder), with a special emphasis on larval chaetotaxy. Wild-caught Calycopis females laid eggs on dead leaves in the laboratory, and the caterpillars successfully completed development on an artificial agar diet to which no leaves were added. Males and females of the sexually dimorphic C. bellera had been previously placed in different genera or different species groups. Calycopis janeirica had been chronically misidentified (and misspelled C. jeneirica). Males and females of this species appear to be correctly associated for the first time. Whereas C. bellera has five larval instars-as reported previously for C. caulonia-C. janeirica has four. Morphological characters of the immatures of C. bellera and C. janeirica are summarized in a table and compared with those of other reared Calycopis species.

LIFE TABLE ANALYSIS OF DIAPHORINA CITRI (HEMIPTERA: PSYLLIDAE) INFESTING SWEET ORANGE (CITRUS SINENSIS) IN SAO PAULO

An ecological life table for eggs and nymphs of Diaphorina citri Kuwayama (Hemiptera: Psyllidae) was constructed with data obtained from orange orchards (Citrus sinensis Osbeck) in 2 regions of the State of Sao Paulo, over 4 generations in the period from XI-2006 to V-2007, comprising spring, summer, and fall seasons. Young growing shoots with D. citri eggs present were identified, and live individuals were counted until adult emergence. No predatory arthropods were observed in association with D. citri eggs and nymphs during the study. The mean parasitism of fourth- and fifth-instar nymphs by Tamarixia radiata Waterston (Hymenoptera: Eulophidae) was 2.3%. The durations of the egg-adult period were similar among the 4 generations, ranging from 18.0 to 24.7 d (at mean temperatures ranging from 21.6 to 26.0 degrees C) and followed the temperature requirement models obtained in the laboratory for D. citri. However, survival from the egg to the adult stage for the same period varied considerably from 1.7 to 21.4%; the highest mortalities were observed in the egg and small nymphal (first- to thirdinstar) stages, which were considered to be key phases for population growth of the pest.

A comparative transcriptome analysis reveals expression profiles conserved across three Eimeria spp. of domestic fowl and associated with multiple developmental stages

Coccidiosis of the domestic fowl is a worldwide disease caused by seven species of protozoan parasites of the genus Eimeria. The genome of the model species, Eimeria tenella, presents a complexity of 55-60 MB distributed in 14 chromosomes. Relatively few studies have been undertaken to unravel the complexity of the transcriptome of Eimeria parasites. We report here the generation of more than 45,000 open reading frame expressed sequence tag (ORESTES) cDNA reads of E. tenella, Eimeria maxima and Eimeria acervulina, covering several developmental stages: unsporulated oocysts, sporoblastic oocysts, sporulated oocysts, sporozoites and second generation merozoites. All reads were assembled to constitute gene indices and submitted to a comprehensive functional annotation pipeline. In the case of E. tenella, we also incorporated publicly available ESTs to generate an integrated body of information. Orthology analyses have identified genes conserved across different apicomplexan parasites, as well as genes restricted to the genus Eimeria. Digital expression profiles obtained from ORESTES/EST countings, submitted to clustering analyses, revealed a high conservation pattern across the three Eimeria spp. Distance trees showed that unsporulated and sporoblastic oocysts constitute a distinct clade in all species, with sporulated oocysts forming a more external branch. This latter stage also shows a close relationship with sporozoites, whereas first and second generation merozoites are more closely related to each other than to sporozoites. The profiles were unambiguously associated with the distinct developmental stages and strongly correlated with the order of the stages in the parasite life cycle. Finally, we present The Eimeria Transcript Database (http://www.coccidia.icb.usp.br/eimeriatdb), a website that provides open access to all sequencing data, annotation and comparative analysis. We expect this repository to represent a useful resource to the Eimeria scientific community, helping to define potential candidates for the development of new strategies to control coccidiosis of the domestic fowl. (C) 2011 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

The preimaginal stages of the ensign wasp Evania appendigaster (Hymenoptera, Evaniidae), a cockroach egg predator

Evania appendigaster is a cosmopolitan wasp that deposits eggs in the oothecae of some species of cockroaches; its larvae then consume the cockroach eggs and embryos. It is a candidate for the biological control of cockroaches, but little is known about its basic biology. Here we describe the external morphology of all immature stages of E. appendigaster and compare them with the larvae of related species. The life cycle of E. appendigaster includes three larval instars, each with 13 body segments. Their mouthparts were generally reduced, except for the mandibles, which were always sclerotized and toothed, and were especially robust in second-instar larvae. Antennal and mouthpart sensilla were basiconic and difficult to observe. Larvae of E. appendigaster are similar in form to other described evaniid larvae, but quite different from the two available descriptions of larvae of gasteruptiid and aulacid wasps. Further descriptions of evaniid larvae will be useful in determining how widespread this morphology is within the family, and in understanding phylogenetic relationships within Hymenoptera.

Life cycle assessment of sugarcane ethanol and palm oil biodiesel joint production

Sugarcane (Saccharum spp.) and palm tree (Elaeis guianeensis) are crops with high biofuel yields, 7.6 m(3) ha (1) y(-)1 of ethanol and 4 Mg ha(-1) y(-1) of oil, respectively. The joint production of these crops enhances the sustainability of ethanol. The objective of this work was comparing a traditional sugarcane ethanol production system (TSES) with a joint production system (JSEB), in which ethanol and biodiesel are produced at the same biorefinery but only ethanol is traded. The comparison is based on ISO 14.040:2006 and ISO 14044:2006, and appropriate indicators. Production systems in Cerrado (typical savannah), Cerradao (woody savannah) and pastureland ecosystems were considered. Energy and carbon balances, and land use change impacts were evaluated. The joint system includes 100% substitution of biodiesel for diesel, which is all consumed in different cropping stages. Data were collected by direct field observation methods, and questionnaires applied to Brazilian facilities. Three sugarcane mills situated in Sao Paulo State and one palm oil refinery located in Para State were surveyed. The information was supplemented by secondary sources. Results demonstrated that fossil fuel use and greenhouse gas emissions decreased, whereas energy efficiency increased when JSEB was compared to TSES. In comparison with TSES, the energy balance of JSEB was 1.7 greater. In addition, JSEB released 23% fewer GHG emissions than TSES. The ecosystem carbon payback time for Cerrado, Cerradao, and Degraded Grassland of JSEB was respectively 4, 7.7 and -7.6 years. These are typical land use types of the Brazilian Cerrado region for which JSEB was conceived. (C) 2012 Elsevier Ltd. All rights reserved.

A surrogate life cycle of Amblyomma ovale Koch, 1844

As ticks spend most of their time off-host, the environment is a major selective force of these parasites. In fact, human impact on landscapes has favored a minority of tick species which became well-known pests. However, this is an ongoing process and novel pests may arise. We herein report a surrogate life cycle of a neotropical tick species. Amblyomma ovate, and which may be related to an increased risk of human rickettsiosis. Under natural conditions, adults of this tick species feed on carnivores and exhibit non-nidicolous ambush behavior, whereas larvae and nymphs feed on small rodents and birds. In an anthropized spot within an Atlantic rainforest reserve of Brazil, an A. ovate population exhibited a nidicolous behavior with all 3 tick stages feeding on the dog. This dog's infestation was outstandingly high, and it displayed the highest anti-Rickettsia titers and harbored Rickettsia-infected ticks. (c) 2012 Elsevier GmbH. All rights reserved.

Life-cycle and host preference of Amblyomma ovale (Acari: Ixodidae) under laboratory conditions

This study evaluated for the first time the life cycle of Amblyomma ovale in the laboratory. For this purpose, larvae and nymphs were exposed to Gallus gallus (chickens), Cavia porcellus (guinea pigs), Rattus norvegicus (wistar rats), Oryctolagus cuniculus (domestic rabbits), Calomys callosus (vesper mouse), and Didelphis albiventris (white-eared opossum). Nymphs were also exposed to Nectomys squamipes (South American water rat). Adult ticks were fed on dogs. The life-cycle of A. ovale in laboratory could be completed in an average period of ca. 190 days, considering prefeeding periods of 30 days for each of the parasitic stages. Vesper mice were the most suitable host for A. ovale larvae, whereas water rats were the most suitable host for A. ovale nymphs. Our results, coupled with literature data, strongly indicate that small rodents have an important role in the life history of A. ovale. Chickens (the only avian host used in the present study) showed to be moderately suitable hosts for subadult A. ovale ticks, indicating that wild birds might have a secondary role in the life history of A. ovale. Domestic dogs showed to be highly suitable for the adult stage of A. ovale, in agreement with literature data that indicate that the domestic dog is currently one of the most important hosts of A. ovale adult ticks in Latin America.

Molting dynamics and juvenile hormone titer profiles in the nymphal stages of a lower termite, Cryptotermes secundus (Kalotermitidae) - signatures of developmental plasticity

Termites are social cockroaches and this sociality is founded on a high plasticity during development. Three molting types (progressive, stationary and regressive molts) are fundamental to achieve plasticity during alate/sexual development, and they make termites a major challenge to any model on endocrine regulation in insect development. As the endocrine signatures underpinning this plasticity are barely understood, we studied the developmental dynamics and their underlying juvenile hormone OH) titers in a wood-dwelling termite. Cryptotermes secundus, which is characterized by an ancestral life style of living in dead wood and individuals being totipotent in development. The following general pattern elements could be identified during winged sexual development (i) regressive molts were accompanied by longer intermolt periods than other molting types, (ii) JH titers decreased gradually during the developmental transition from larva (immatures without wing buds), to nymph (immatures with wing buds), to winged adult, (iii) in all nymphal stages, the JH titer rose before the next molt and dropped thereafter within the first week, (iv) considerable variation in JH titers occurred in the midphase of the molting cycle of the 2nd and 3rd nymphal instar, inferring that this variation may reflect the underlying endocrine signature of each of the three molting types, (v) the 4th nymphal instar, the shortest of all, seems to be a switch point in development, as nymphs in this stage mainly developed progressively. When comparing these patterns with endocrine signatures seen in cockroaches, the developmental program of Cryprotermes can be interpreted as a co-option and repetitive use of hormonal dynamics of the post dorsal-closure phase of cockroach embryonic development. (C) 2012 Elsevier Ltd. All tights reserved.

Multiscale fabrication of functional materials for life sciences

Regenerative medicine claims for a better understanding of the cause-effect relation between cell behaviour and environment signals. The latter encompasses topographical, chemical and mechanical stimuli, electromagnetic fields, gradients of chemo-attractants and haptotaxis. In this perspective, a spatial control of the structures composing the environment is required. In this thesis I describe a novel approach for the multiscale patterning of biocompatible functional materials in order to provide systems able to accurately control cell adhesion and proliferation. The behaviour of different neural cell lines in response to several stimuli, specifically chemical, topographical and electrical gradients is presented. For each of the three kind of signals, I chose properly tailored materials and fabrication and characterization techniques. After a brief introduction on the state of art of nanotechnology, nanofabrication techniques and regenerative medicine in Chapter 1 and a detailed description of the main fabrication and characterization techniques employed in this work in Chapter 2, in Chapter 3 an easy route to obtain accurate control over cell proliferation close to 100% is described (chemical control). In Chapter 4 (topographical control) it is shown how the multiscale patterning of a well-established biocompatible material as titanium dioxide provides a versatile and robust method to study the effect of local topography on cell adhesion and growth. The third signal, viz. electric field, is investigated in Chapter 5 (electrical control), where the very early stages of neural cell adhesion are studied in the presence of modest steady electric fields. In Chapter 6 (appendix) a new patterning technique, called Lithographically Controlled Etching (LCE), is proposed. It is shown how LCE can provide at the same time the micro/nanostructuring and functionalization of a surface with nanosized objects, thus being suitable for applications both in regenerative medicine in biosensing.

The challenges and the limitations in Life Cycle Impact Assessment for metal oxide nanoparticles, a case study on nano- TiO2

Life Cycle Assessment (LCA) is a chain-oriented tool to evaluate the environment performance of products focussing on the entire life cycle of these products: from the extraction of resources, via manufacturing and use, to the final processing of the disposed products. Through all these stages consumption of resources and pollutant releases to air, water, soil are identified and quantified in Life Cycle Inventory (LCI) analysis. Subsequently to the LCI phase follows the Life Cycle Impact Assessment (LCIA) phase; that has the purpose to convert resource consumptions and pollutant releases in environmental impacts. The LCIA aims to model and to evaluate environmental issues, called impact categories. Several reports emphasises the importance of LCA in the field of ENMs. The ENMs offer enormous potential for the development of new products and application. There are however unanswered questions about the impacts of ENMs on human health and the environment. In the last decade the increasing production, use and consumption of nanoproducts, with a consequent release into the environment, has accentuated the obligation to ensure that potential risks are adequately understood to protect both human health and environment. Due to its holistic and comprehensive assessment, LCA is an essential tool evaluate, understand and manage the environmental and health effects of nanotechnology. The evaluation of health and environmental impacts of nanotechnologies, throughout the whole of their life-cycle by using LCA methodology. This is due to the lack of knowledge in relation to risk assessment. In fact, to date, the knowledge on human and environmental exposure to nanomaterials, such ENPs is limited. This bottleneck is reflected into LCA where characterisation models and consequently characterisation factors for ENPs are missed. The PhD project aims to assess limitations and challenges of the freshwater aquatic ecotoxicity potential evaluation in LCIA phase for ENPs and in particular nanoparticles as n-TiO2.

Assessment and optimization of chemical industrial processes from a life cycle perspective

During the PhD program in chemistry, curriculum in environmental chemistry, at the University of Bologna the sustainability of industry was investigated through the application of the LCA methodology. The efforts were focused on the chemical sector in order to investigate reactions dealing with the Green Chemistry and Green Engineering principles, evaluating their sustainability in comparison with traditional pathways by a life cycle perspective. The environmental benefits associated with a reduction in the synthesis steps and the use of renewable feedstock were assessed through a holistic approach selecting two case studies with high relevance from an industrial point of view: the synthesis of acrylonitrile and the production of acrolein. The current approach wants to represent a standardized application of LCA methodology to the chemical sector, which could be extended to several case studies, and also an improvement of the current databases, since the lack of data to fill the inventories of the chemical productions represent a huge limitation, difficult to overcome and that can affects negatively the results of the studies. Results emerged from the analyses confirms that the sustainability in the chemical sector should be evaluated from a cradle-to-gate approach, considering all the stages and flows involved in each pathways in order to avoid shifting the environmental burdens from a steps to another. Moreover, if possible, LCA should be supported by other tools able to investigate the other two dimensions of sustainability represented by the social and economic issues.