Genetic relationships of Corynebacterium diphtheriae strains isolated from a diphtheria case and carriers by restriction fragment length polymorphism of rRNA genes

In the present study we report the results of an analysis, based on ribotyping of Corynebacterium diphtheriae intermedius strains isolated from a 9 years old child with clinical diphtheria and his 5 contacts. Quantitative analysis of RFLPs of rRNA was used to determine relatedness of these 7 C.diphtheriae strains providing support data in the diphtheria epidemiology. We have also tested those strains for toxigenicity in vitro by using the Elek's gel diffusion method and in vivo by using cell culture method on cultured monkey kidney cell (VERO cells). The hybridization results revealed that the 5 C.diphtheriae strains isolated from contacts and one isolated from the clinical case (nose case strain) had identical RFLP patterns with all 4 restriction endonucleases used, ribotype B. The genetic distance from this ribotype and ribotype A (throat case strain), that we initially assumed to be responsible for the illness of the patient, was of 0.450 showing poor genetic correlation among these two ribotypes. We found no significant differences concerned to the toxin production by using the cell culture method. In conclusion, the use of RFLPs of rRNA gene was successful in detecting minor differences in closely related toxigenic C.diphtheriae intermedius strains and providing information about genetic relationships among them.

COMPARISON OF A COMMERCIAL ENZYME IMMUNOASSAY WITH PLAQUE REDUCTION NEUTRALIZATION FOR MATERNAL AND INFANT MEASLES ANTIBODY MEASUREMENT

The most practicable assay for measurement of measles IgG (mIgG) in large numbers of sera is an enzyme immunoassay (EIA). To assess how EIA results would agree with those by the gold standard method of plaque reduction neutralization (PRN) we compared the results from the two methods in 43 pairs of maternal and umbilical cord sera, and sera from the corresponding infants when aged 11 - 14 months. In maternal-cord sera, the differences between mean antibody levels by EIA or PRN were not statistically significant, though in individual sera, differences could be large. However, agreement was less good for infants sera, in which levels of mIgG were very low. The conclusions of a study of transplacental transport of mIgG would not be affected by the use of either technique. When studying waning immunity in infants, PRN should be the method of choice, while results from studies using EIA should be interpreted with caution.

Protocolo de fisioterapia, com auxílio de biofeedback electromiográfico, em utentes com disfunções do ombro: efeitos na dor, funcionalidade e estabilidade dinâmica

RESUMO: Introdução: A dor e disfunções do movimento no complexo articular do ombro (CAO) são comuns e debilitantes. O uso de exercícios segundo os pressupostos de estabilidade dinâmica (ED), com auxílio de Biofeedback electromiográfico (BEMG) tem vindo a ser referido, como uma forma de aumentar a efectividade da intervenção nas disfunções do complexo articular do ombro (DCAO)Objectivo Principal: Estudar os efeitos de um protocolo de intervenção, com BEMG, cujas finalidades foram abolir a dor, aumentar a funcionalidade e a ED da omoplata, em utentes com DCAO. Objectivos secundários: Comparar os subgrupos e quanto às características, resultados, tempos de intervenção total e até atingir critérios de alta; Comparar os resultados nos momentos inicial e final. Métodos: Foi realizado um coorte clínico, longitudinal, retrospectivo, observacional, analítico. A amostra foi constituída por 82 sujeitos, divididos em dois subgrupos (n=53 SCSA e n=29 IGU). Os instrumentos de medida utilizados foram a EVA, o DASH, o SPADI e o BEMG. Foi seguido o protocolo de ED proposto por Santos e Matias (2007), de acordo com as 3 fases de intervenção por eles descritas, realizando uma sessão semanal, monitorizando exercícios que seguem estes princípios, com BEMG. Foram avaliadas as variáveis dor, postura, padrão de recrutamento, controlo motor, posição inicial da omoplata (PIO), amplitudes articulares (AA’s), força muscular (FM) e postura. Para analisar os dados, recorreu-se a estatística descritiva e inferencial. Resultados: A intervenção foi efectiva na abolição da dor no momento (0,43 para 0,00/10EVA no subgrupo SCSA e 0,66 para 0,00/10EVA no subgrupo IGU) na pior dor (5,47/10EVA para 0,06/10EVA no subgrupo SCSA e 5,28/10 para 0,14/10 no subgrupo IGU), no aumento da função (28,57 para 0,66/100DASH e 39,00 para 0,63/100SAPDI no subgrupo SCSA e 25,80 para 0,38/100DASH e 28,19 para 0,39/100 no subgrupo IGU) e no aumento da ED da omoplata com normalização do padrão de recrutamento, controlo motor, PIO dentro do espectro de normalidade e boa capacidade de controlar a sua posição, ao longo do movimento do membro superior (MS). A intervenção proporcionou, ainda a normalização das AA’s, FM e autocorrecção postural. O tempo médio de intervenção foi de 6,45semanas no subgrupo SCSA e 5,83sem no subgrupo IGU. Estes resultados são semelhantes comparativamente a estudos que utilizaram uma intervenção baseada nos mesmos princípios (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusão: O protocolo de intervenção aplicado, com uso de exercícios baseados nos princípios da ED e uso de BEMG, permitiu o alcance dos objectivos, junto de utentes com DCAO (SCSA e IGU). Verificou-se que, independentemente da condição, os resultados foram idênticos em ambos subgrupos, não apresentando diferenças significativas entre as variáveis de medida final, o tempo total de intervenção e os tempos até atingir os critérios de alta, expecto para a Dor, sendo este superior no subgrupo SCSA.---------------------------------------- ABSTRACT:Introduction: Movement disorders and pain in the shoulder joint complex (SJC) are common and debilitating. The use of exercises under the premises of dynamic stability (DS), with the aid of electromyographic biofeedback (EMGBF) has been mentioned as a way to increase the effectiveness of the intervention in disorders of the shoulder joint complex (DSJC) Main Objective: To evaluate the results of an intervention protocol, with EMGBF whose aims were to abolish the pain, increase functionality and DS of the scapula in patients with DSJC. Objectives: To compare the subgroups and the characteristics, outcomes, and total intervention times to reach discharge criteria; to compare the results at the beginning and at the end. Methods: We conducted a clinical cohort, longitudinal, retrospective, observational analysis. The sample consisted of 82 subjects, divided into two subgroups (n = 53 shoulder impingement syndrome SIS n = 29 shoulder joint instability SJI). The measurement instruments used were the VAS, DASH, SPADI, and EMGBF. It was followed the DS protocol proposed by Santos and Matias (2007), according to the three phases of intervention, described by performing a weekly session, monitoring exercises that follow these principles, with EMGBF. The variables were pain, posture, recruitment pattern, motor control, the initial position of the scapula (IPS), range of motion (ROM), muscular strength (MS) and posture. To analyze the data, we used the descriptive and inferential statistics. Results: The intervention was effective in abolishing the pain at the time (0.43 to 0.00/10 VAS in the SIS subgroup and 0.66 to 0.00/10 VAS in the SJI subgroup) in worst pain (5.47 to 0,06/10 VAS in the SIS subgroup and 5.28/ to 0.14/10 VAS in the SJI subgroup), increasing the function (28,57 to 0,66/100 DASH and 39,00 to 0,63/100 SAPDI in the SIS subgroup and 25,80 to 0,38/100 DASH and 28,19 to 0,39/100 SPADI in the SJI subgroup) and the increase in DS of the scapula with normalization of the pattern recruitment, motor control, IPS within the spectrum of normalcy and good ability to control its position along the movement of the upper limb (UL). The intervention provided, although the normalization of ROM, MS and self-correcting posture. The average length of intervention was 6.45 weeks in the SIS subgroup and 5.83 in the IS subgroup. These results are comparable with similar studies that used an intervention based on the same principles (Matias e Cruz, 2004; Cunha e Matias, 2006; Santos e Matias, 2007; Rodrigues e Matias, 2009). Conclusion: The intervention protocol implemented with the use of exercises based on the principles of DS and the use of EMGBF was effective, allowing the accomplishment of goals, in patients with DSJC (SIS and SJI). It was found that, regardless of condition, the results were identical in both groups, showing no significant differences between the variables of the final measure, the total time of intervention and the times to reach discharge criteria, except for pain, which was higher in the SIS subgroup.

Measurement of lead concentration in biological tissues by atomic spectroscopy techniques

Dissertation for the degree of Doctor of Philosophy in Physics

Determinação da tenacidade à fratura de adesivos estruturais em modo misto pelo ensaio Single-Leg Bending

A utilização de juntas adesivas em aplicações industriais tem vindo a aumentar, em detrimento dos métodos tradicionais tais como a soldadura, brasagem e ligações aparafusadas e rebitadas. Este facto deve-se às vantagens que estas oferecem, como o facto de serem mais leves, comportarem-se bem sob cargas cíclicas ou de fadiga, a ligação de materiais diferentes e menores concentrações de tensões. Para aumentar a confiança no projeto de estruturas adesivas, é importante conseguir prever com precisão a sua resistência mecânica e respetivas propriedades de fratura (taxa crítica de libertação de energia de deformação à tração, GIC, e corte, GIIC). Estas propriedades estão diretamente relacionadas com a Mecânica da Fratura e são estimadas através de uma análise energética. Para este efeito, distinguem-se três tipos de modelos: modelos que necessitam da medição do comprimento de fenda durante a propagação do dano, modelos que utilizam um comprimento de fenda equivalente e métodos baseados no integral J. Como na maioria dos casos as solicitações ocorrem em modo misto (combinação de tração com corte), é de grande importância a perceção da fratura nesta condições, nomeadamente das taxas de libertação de energia relativamente a diferentes critérios ou envelopes de fratura. Esta comparação permite, por exemplo, averiguar qual o melhor critério energético de rotura a utilizar em modelos numéricos baseados em Modelos de Dano Coesivo. Neste trabalho é realizado um estudo experimental utilizando o ensaio Single-Leg Bending (SLB) em provetes colados com três tipos de adesivos, de forma a estudar e comparar as suas propriedades de fratura. Para tal, são aplicados alguns modelos de redução da taxa de libertação de energia de deformação à tração, GI, e corte, GII, enquadrados nos modelos que necessitam da medição do comprimento de fenda e nos modelos que utilizam um comprimento de fenda equivalente. Numa fase posterior, procedeu-se à análise e comparação dos resultados adquiridos durante a fase experimental de GI e GII de cada adesivo. A discussão de resultados foi também feita através da análise dos valores obtidos em diversos envelopes de fratura, no sentido de averiguar qual o critério de rotura mais adequado a considerar para cada adesivo. Foi obtida uma concordância bastante boa entre métodos de determinação de GI e GII, com exceção do adesivo mais dúctil, para o qual o método baseado no comprimento de fenda equivalente apresentou resultados ligeiramente superiores.

Damage assessment of fibre reinforced laminates

The use of solid wastes and natural fibres to the production of innovative composites is now a matter of environmental need. A set of hybrid composites constituted of waste rubber particles and sugarcane bagasse fibres into a thermoset composite material are drilled to determine the effect of rubber particle addition and size, sugarcane fibre addition and length and fibre chemical treatment on damage extension and related mechanical properties. Damage extension is determined by enhanced radiography for further damage measurement – diameter and areas – and correlated with mechanical test results — bearing test. The results demonstrated significant effect of the rubber and fibre additions on mechanical properties of the composites.

Adhesive thickness effects of a ductile adhesive by optical measurement techniques

Adhesive bonding is an excellent alternative to traditional joining techniques such as welding, mechanical fastening or riveting. However, there are many factors that have to be accounted for during joint design to accurately predict the joint strength. One of these is the adhesive layer thickness (tA). Most of the results are for epoxy structural adhesives, tailored to perform best with small values of tA, and these show that the lap joint strength decreases with increase of tA (the optimum joint strength is usually obtained with tA values between 0.1 and 0.2 mm). Recently, polyurethane adhesives were made available in the market, designed to perform with larger tA values, and whose fracture behaviour is still not studied. In this work, the effect of tA on the tensile fracture toughness (View the MathML source) of a bonded joint is studied, considering a novel high strength and ductile polyurethane adhesive for the automotive industry. This work consists on the fracture characterization of the bond by a conventional and the J-integral techniques, which accurately account for root rotation effects. An optical measurement method is used for the evaluation of crack tip opening (δn) and adherends rotation at the crack tip (θo) during the test, supported by a Matlab® sub-routine for the automated extraction of these parameters. As output of this work, fracture data is provided in traction for the selected adhesive, enabling the subsequent strength prediction of bonded joints.

Evaluation of thermometers for ear temperature measurement at the wards in a university hospital

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Locally Advanced and Metastatic Prostate Cancer Treated with Intermittent Androgen Monotherapy or Maximal Androgen Blockade: Results from a Randomised Phase 3 Study by the South European Uroncological Group

BACKGROUND: Few randomised studies have compared antiandrogen intermittent hormonal therapy (IHT) with continuous maximal androgen blockade (MAB) therapy for advanced prostate cancer (PCa). OBJECTIVE: To determine whether overall survival (OS) on IHT (cyproterone acetate; CPA) is noninferior to OS on continuous MAB. DESIGN, SETTING, AND PARTICIPANTS: This phase 3 randomised trial compared IHT and continuous MAB in patients with locally advanced or metastatic PCa. INTERVENTION: During induction, patients received CPA 200 mg/d for 2 wk and then monthly depot injections of a luteinising hormone-releasing hormone (LHRH; triptoreline 11.25 mg) analogue plus CPA 200 mg/d. Patients whose prostate-specific antigen (PSA) was <4 ng/ml after 3 mo of induction treatment were randomised to the IHT arm (stopped treatment and restarted on CPA 300 mg/d monotherapy if PSA rose to ≥20 ng/ml or they were symptomatic) or the continuous arm (CPA 200 mg/d plus monthly LHRH analogue). OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS: Primary outcome measurement was OS. Secondary outcomes included cause-specific survival, time to subjective or objective progression, and quality of life. Time off therapy in the intermittent arm was recorded. RESULTS AND LIMITATIONS: We recruited 1045 patients, of which 918 responded to induction therapy and were randomised (462 to IHT and 456 to continuous MAB). OS was similar between groups (p=0.25), and noninferiority of IHT was demonstrated (hazard ratio [HR]: 0.90; 95% confidence interval [CI], 0.76-1.07). There was a trend for an interaction between PSA and treatment (p=0.05), favouring IHT over continuous therapy in patients with PSA ≤1 ng/ml (HR: 0.79; 95% CI, 0.61-1.02). Men treated with IHT reported better sexual function. Among the 462 patients on IHT, 50% and 28% of patients were off therapy for ≥2.5 yr or >5 yr, respectively, after randomisation. The main limitation is that the length of time for the trial to mature means that other therapies are now available. A second limitation is that T3 patients may now profit from watchful waiting instead of androgen-deprivation therapy. CONCLUSIONS: Noninferiority of IHT in terms of survival and its association with better sexual activity than continuous therapy suggest that IHT should be considered for use in routine clinical practice.

Modelling HIV/AIDS length of stay in Portugal

Tese apresentada como requisito parcial para obtenção do grau de Doutor em Estatística e Gestão de Informação pelo Instituto Superior de Estatística e Gestão de Informação da Universidade Nova de Lisboa

Biology of Triatominae (Reduviidae Hemiptera) from North of Formosa County (Goiás-Brazil) I. Length of life cycle of Triatoma sordida (Stal. 1859)

In the present paper the life cycle of Triatoma sordida was studied. The mean length from egg to adult was 213 days. The mean length in days from each stage was: 24.3 (± 1.30) for the first. 32.8 (± 1.45) (2nd), 36.1 (± 1.50) (3rd), 44.6 (± 1.85) (4th) and 52.0 (± 1.92) (5th). The mean egg incubation períod was 23.2 (± 1.40). Overall mortality was 18.8% and egg viability was 82.5%.

Biology of Triatominae (Reduviidae, Hemiptera) from north of formosa county (Goiás - Brazil) II. Length of life cycle of Rhodnius Neglectus lent, 1954

In the present paper the life cycle of Rhodnius neglectus was studied. The mean length from egg to adult was 119 days. The mean length in day from each stage was: 17.4 (± 1.15) for first, 18.2 (± 1.28) for second, fourth and 29.8 (± 1.46) for fifth.

Biology of triatominae (Reduviidade, Hemiptera) from north of Formosa county (Goiás - Brazil). III: length of life cycle of Psammolestes tertius Lent and Jurberg 1965

In the present work the life cycle of Psammolestes tertius was studied. The mean length, in days, fromeach stage was: 26.3 (± 1.7) (1st), 28.6 (± 1.8) (2nd), 28.4 (± 1.8) (3rd), 32.2 (± 1.9) (4th) and 33.5 (± 5.8) (5th). The mean egg incubation period was 15.7 days (± 1.7). Overall mortality was 48.9% and egg viability was 65.7%.

The impact of the measurement unit of unit price on consumer preference and choice

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Atomic force microscopy assisted with electron and ion beam microscopy for the direct measurement of biostructures and DNA samples

Dissertation to obtain a Master degree in Biotechnology