Methanogens, sulphate and heavy metals: a complex system

Anaerobic digestion (AD) is a well-established technology used for the treatment of wastes and wastewaters with high organic content. During AD organic matter is converted stepwise to methane-containing biogasa renewable energy carrier. Methane production occurs in the last AD step and relies on methanogens, which are rather sensitive to some contaminants commonly found in wastewaters (e.g. heavy metals), or easily outcompeted by other groups of microorganisms (e.g. sulphate reducing bacteria, SRB). This review gives an overview of previous research and pilot-scale studies that shed some light on the effects of sulphate and heavy metals on methanogenesis. Despite the numerous studies on this subject, comparison is not always possible due to differences in the experimental conditions used and parameters explained. An overview of the possible benefits of methanogens and SRB co-habitation is also covered. Small amounts of sulphide produced by SRB can precipitate with metals, neutralising the negative effects of sulphide accumulation and free heavy metals on methanogenesis. Knowledge on how to untangle and balance sulphate reduction and methanogenesis is crucial to take advantage of the potential for the utilisation of biogenic sulphide as a metal detoxification agent with minimal loss in methane production in anaerobic digesters.

Using OpenFOAM to aid the design of complex profile extrusion dies

[Extrat] Thermoplastic profiles are very attractive due to their inherent design freedom. However, the usual methodologies employed to design extrusion forming tools, based on experimental based trial–and–error procedures, are highly dependent on the designer’s experience and lead to high resources consumption. Despite of the relatively low cost of the raw materials employed on the production of this type of profiles, the resources involved in the die design process significantly increase their cost. These difficulties are even more evident when a complex geometry profile has to be produced and there is no previous experience with similar geometries. Therefore, novel design approaches are required, in order to reduce the required resources and guarantee a good performance for the produced profile. (...)

Patterns of Mycobacterium tuberculosis-complex excretion and characterization of super-shedders in naturally-infected wild boar and red deer

Wild boar (Sus scrofa) and red deer (Cervus elaphus) are the main maintenance hosts for bovine tuberculosis (bTB) in continental Europe. Understanding Mycobacterium tuberculosis complex (MTC) excretion routes is crucial to define strategies to control bTB in free-ranging populations, nevertheless available information is scarce. Aiming at filling this gap, four different MTC excretion routes (oronasal, bronchial-alveolar, fecal and urinary) were investigated by molecular methods in naturally infected hunter-harvested wild boar and red deer. In addition MTC concentrations were estimated by the Most Probable Number method. MTC DNA was amplified in all types of excretion routes. MTC DNA was amplified in at least one excretion route from 83.0% (CI95 70.8-90.8) of wild ungulates with bTB-like lesions. Oronasal or bronchial-alveolar shedding were detected with higher frequency than fecal shedding (p < 0.001). The majority of shedders yielded MTC concentrations <10(3) CFU/g or mL. However, from those ungulates from which oronasal, bronchial-alveolar and fecal samples were available, 28.2% of wild boar (CI95 16.6-43.8) and 35.7% of red deer (CI95 16.3-61.2) yielded MTC concentrations >10(3) CFU/g or mL (referred here as super-shedders). Red deer have a significantly higher risk of being super-shedders compared to wild boar (OR = 11.8, CI95 2.3-60.2). The existence of super-shedders among the naturally infected population of wild boar and red deer is thus reported here for the first time and MTC DNA concentrations greater than the minimum infective doses were estimated in excretion samples from both species.

Widespread environmental contamination with Mycobacterium tuberculosis complex revealed by a molecular detection protocol

Environmental contamination with Mycobacterium tuberculosis complex (MTC) has been considered crucial for bovine tuberculosis persistence in multi-host-pathogen systems. However, MTC contamination has been difficult to detect due to methodological issues. In an attempt to overcome this limitation we developed an improved protocol for the detection of MTC DNA. MTC DNA concentration was estimated by the Most Probable Number (MPN) method. Making use of this protocol we showed that MTC contamination is widespread in different types of environmental samples from the Iberian Peninsula, which supports indirect transmission as a contributing mechanism for the maintenance of bovine tuberculosis in this multi-host-pathogen system. The proportion of MTC DNA positive samples was higher in the bovine tuberculosis-infected than in presumed negative area (0.32 and 0.18, respectively). Detection varied with the type of environmental sample and was more frequent in sediment from dams and less frequent in water also from dams (0.22 and 0.05, respectively). The proportion of MTC-positive samples was significantly higher in spring (p<0.001), but MTC DNA concentration per sample was higher in autumn and lower in summer. The average MTC DNA concentration in positive samples was 0.82 MPN/g (CI95 0.70-0.98 MPN/g). We were further able to amplify a DNA sequence specific of Mycobacterium bovis/caprae in 4 environmental samples from the bTB-infected area.

Propolis: A complex natural product with a plethora of biological activities that can be explored for drug development

The health industry has always used natural products as a rich, promising, and alternative source of drugs that are used in the health system. Propolis, a natural resinous product known for centuries, is a complex product obtained by honey bees from substances collected from parts of different plants, buds, and exudates in different geographic areas. Propolis has been attracting scientific attention since it has many biological and pharmacological properties, which are related to its chemical composition. Several in vitro and in vivo studies have been performed to characterize and understand the diverse bioactivities of propolis and its isolated compounds, as well as to evaluate and validate its potential. Yet, there is a lack of information concerning clinical effectiveness. The goal of this review is to discuss the potential of propolis for the development of new drugs by presenting published data concerning the chemical composition and the biological properties of this natural compound from different geographic origins.

In-line rheo-optical microstructural characterization of complex polymer systems

Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos.

Técnicas Experimentales para Caracterizar Flujos Complejos. Experimental techniques for complex flows characterization.

En ambientes fluviales, la interacción del flujo con la geometría del cauce y con los sedimentos del lecho define una dinámica turbulenta compleja en permanente evolución. El nivel de complejidad del flujo aumenta ante la presencia de estructuras hidráulicas (pilas de puentes, protecciones contra erosión, etc.). La mayoría de los ríos, o canales naturales, presentan confluencias y bifurcaciones, en donde se genera una convergencia (o divergencia) del flujo con el resultado de un ambiente hidrodinámico complejo en la cercanía de las uniones (Kenworthy y Rhoads 1995). Bajo estas condiciones no es posible extrapolar las soluciones tradicionales básicas de las ecuaciones de gobierno desarrolladas para canales rectos y uniformes. Algunas investigaciones experimentales realizadas en estos sistemas son las de Best (1988), Rhoads y Sukhodolov (2001), Richardson et al. (1996); Richardson y Thorne (1998, 2001); Parsons et al. (2004); Szupiany et al. (2005).Por otro lado, la zona costera en ambientes marítimos se caracteriza por la existencia de diversos procesos dinámicos, entre los que se destacan la acción de olas, corrientes, interacción olas-corrientes, transporte de sedimentos y cambios batimétricos. Estos se manifiestan en una alteración morfodinámica de la playa generando superficies potenciales de erosión. Así, el diseño de las protecciones costeras (ya sean continuas, como escolleras o muros verticales; o discontinuas como espigones o diques externos) sometidas al clima marítimo bajo distintas condiciones de olas y mareas, alteran los patrones de circulación y de transporte afectando la morfodinámica en su zona de influencia y plantean, por ejemplo, la necesidad de ajustes de los coeficientes de estabilidad y pesos de los bloques de roca de las escolleras. Los problemas generados, son especialmente complejos ya que deben considerarse para su estudio, los niveles de turbulencia, la transmisión del oleaje sobre o a través de la estructura, difracción alrededor de la misma, refracción y shoaling sobre un fondo dinámico, reflexión en la estructura, etc. (Alsina et al., 2007) Revisiones bibliográficas previas muestran que, en ambos ambientes (fluvial y marítimo), es necesario optimizar las técnicas experimentales existentes para que ellas permitan caracterizar con precisión los flujos turbulentos complejos presentes. El objetivo general propuesto en esta investigación es contribuir a mejorar el conocimiento de los procesos hidrodinámicos de flujos turbulentos naturales con y sin la presencia de estructuras hidráulicas que den lugar a formaciones complejas (3D). Para alcanzar este objetivo se propone realizar una recopilación de antecedentes y un análisis crítico detallado de los equipos de ultima generación para mediciones de flujo con alta frecuencia y resolución disponibles en el Laboratorio de Hidráulica (LH) de la Universidad Nacional de Córdoba (UNC): ADV 3D (Acoustic Doppler Velocimeter de Sontek) y laser PIV 2D (Particle Image Velocimeter de Dantec). A estos equipamientos se le agrega un moderno equipo de generación bidimensional de oleaje con absorción dinámica (adquiridos a HR Ltd. en 2007 por el CAI 085 del FONTAR). Finalmente se prevé utilizar este equipamiento durante el desarrollo de experimentos y mediciones los cuales se realizarán sobre modelos físicos fluviales y costeros diseñados y construidos con y sin estructuras que interactúen con flujo turbulentos complejos. Los resultados obtenidos en este proyecto permitirá alcanzar una mejor comprensión de los procesos hidrodinámicos de los flujos turbulentos complejos, lo cual es necesario y de gran utilidad para realizar un manejo apropiado de los ambientes fluviales y marítimos, teniendo como campo directo de aplicación el correcto diseño de estructuras hidráulicas, asistiendo a la toma de medidas correctivas en sistemas naturales sometidos a procesos erosivos o de sedimentación, y contribuyendo de esta forma al manejo ambientalmente sustentable de los recursos.

Dinámica Cuántica de Sistemas Complejos: Fundamentos y Aplicaciones. Quantum Dynamics in Complex Systems: Fundamentals and Aplications.

El procedimiento de revertir la dinámica colectiva (diablillo de Loschmidt apresurado) mediante un pulso de radio frecuencia, permite generar un Eco de Loschmidt, es decir la refocalización de una excitación localizada. Alternativamente, en acústica es posible implementar un Espejo de Reversión Temporal, que consiste en la progresiva inyección de una débil excitación ultrasónica en la periferia de un sistema, para construir una excitación que se propaga "hacia atrás". Así, podemos afirmar que es posible revertir y controlar la dinámica. Sin embargo, aún no se posee una comprensión detallada de los mecanismos que gobiernan estos procedimientos. Este proyecto busca responder las preguntas que posibilitan esta comprensión.

Procesos oxidativos en matrices alimentarias complejas. Oxidative processes in complex food matrices.

Las reacciones bioquímicas que ocurren como consecuencia del tratamiento y almacenamiento de los alimentos, mejoran la seguridad alimentaria, las propiedades sensoriales y la vida útil. Sin embargo, el tratamiento térmico, la exposición a la luz y el oxígeno pueden causar daño oxidativo a los lípidos y proteínas. Los procesos oxidativos de matrices complejas tienen características distintivas que no se manifiestan cuando los componentes son sometidos a oxidación individualmente. La hipótesis de trabajo es que la oxidación de proteínas en matrices alimentarias complejas altera la estructura y las propiedades funcionales de las proteínas y, que las modificaciones que se producen varían según las condiciones de procesamiento y de la composición química del alimento. Nuestros estudios intentan demostrar que el estado oxidativo de las proteínas de un alimento es un parámetro importante para la evaluación de las propiedades funcionales, sensoriales y nutricionales de un producto lácteo. El objetivo general del proyecto es el estudio de los procesos de oxidación de matrices alimentarias complejas (la leche, miel) y su relación con distintos procesos y materiales utilizados en la industria. Es decir, nos proponemos estudiar las consecuencias funcionales y biológicas (calidad nutricional, coagulación) de la oxidación proteica en modelos experimentales “in vitro” y en productos comerciales. 1. Estudiar los fenómenos de peroxidación proteica en leche entera y descremada sometida a los distintos procesos tecnológicos de la producción de leche y queso a escala laboratorio. Se realizarán las mismas experiencias con albúmina sérica y con proteínas aisladas de suero de leche para comparar diferencias entre una matriz compleja y una simple. 2. Determinar la relación entre oxidación y composición proteica de la leche, y los cambios en las fracciones proteicas aisladas (caseínas y beta-lactoglobulina). 3. Analizar el impacto de los procesos tecnológicos a nivel de producción primaria (composición proteica y estado de oxidación) en los indicadores de inflamación (contenido de células somáticas y proteína C Reactiva) y de estado redox (capacidad antioxidante de los productos lácteos y nivel de carbonilos de proteinas). 4. Comparar las características de composición química y el estado de oxidación de leche provenientes de las tres regiones (Buenos Aires, Santa Fe y Córdoba) que conforman la cuenca láctea Argentina. Este objetivo se realizará conjuntamente con los integrantes de nuestro grupo de investigación que trabajan en el Laboratorio de Control de Calidad de la Escuela Superior de Lechería. 5. Determinar los metabolitos secundarios de mieles uniflorales propuestos como responsables de la capacidad antioxidante de estas (polifenoles) y como indicadores de su origen botánico. 6. Valorar la capacidad antioxidante total de mieles uniflorales. 7. Validar los métodos analíticos y semicuantitativos utilizados y a utilizar en el presente proyecto teniendo en cuenta lo efectos de matrices típico de los fluidos biológicos y las mezclas. El estudio de las modificaciones oxidativas de matrices complejas es un tema que es importante tanto desde el punto de vista del conocimiento básico como del aplicado. Nosotros creemos que el presente proyecto aportará conocimiento sobre las características de las vías oxidativas de proteínas en matrices complejas y que podrá ser utilizado para diseñar estrategias productivas tendientes a disminuir el deterioro de la calidad de la leche debido a la exposición a energía radiante. Parte de la experiencia ganada por el grupo ha sido ya volcada a subsanar dificultades y problemas de oxidación y deterioro de la calidad de alimentos. Además, se contribuirá a discernir la paradoja que existe en el área sobre las propiedades oxidantes/antioxidantes de los polifenoles y la relación entre estas y el estado oxidativo de un alimento. The biochemical reactions that occur as a result of food treatment and storage, improve food security, sensory properties and shelf life. Heat treatment, exposure to light and oxygen can cause oxidative damage to lipids and proteins. Oxidative processes in complex matrices display distinctive features that do not appear when the components are individually subjected to oxidation. The hypothesis is that protein oxidation in complex food matrices alters the structure and functional properties of proteins and that the modifications vary according to process conditions and food composition. The main goal is to study oxidation of complex food matrices (milk, honey) with different processes and materials used in the industry. The specific aims are: 1. To study protein oxidation in whole milk and skim subject to various technological processes. The same experiences will be done with serum albumin and isolated whey proteins to compare complex and simple matrices. 2. To determine the relationship between oxidation and milk protein composition, and changes in casein and beta-lactoglobulin. 3. Analyze the impact of technological processes at the level of primary production on markers of inflammation and redox (antioxidant capacity and protein carbonyls). 4. Compare characteristics of chemical composition and oxidation state of milk. 5. Determine secondary metabolites of honey responsible for the antioxidant capacity of these. 6. To evaluate the total antioxidant capacity unifloral honey. This project will provide knowledge about characteristics of oxidative pathways of proteins in complex matrices that can be used to design production strategies aimed at reduce the deterioration of milk quality. Also, it would help to discern the paradox that exists on the oxidants/antioxidants properties of polyphenols and the relationship between these and the oxidative status of a food.

Defining habitat characteristics influencing the distribution, density and growth of Plaice (Pleuronectes Platessa) and Dab (Limanda Limanda) on west of Ireland nursery grounds

Plaice (Pleuronectes platessa, L.) and dab (Limanda limanda, L.) are among the most abundant flatfishes in the north-eastern Atlantic region and the dominant species in shallow coastal nursery grounds. With increasing pressures on commercial flatfish stocks in combination with changing coastal environments, better knowledge of population dynamics during all life stages is needed to evaluate variability in year-class strength and recruitment to the fishery. The aim of this research was to investigate the complex interplay of biotic and abiotic habitat components influencing the distribution, density and growth of plaice and dab during the vulnerable juvenile life stage and to gain insight in spatial and temporal differences in nursery habitat quality along the west coast of Ireland. Intraspecific variability in plaice diet was observed at different spatial scales and showed a link with condition, recent growth and morphology. This highlights the effect of food availability on habitat quality and the need to consider small scale variation when attempting to link habitat quality to feeding, growth and condition of juvenile flatfish. There was evidence of trophic, spatial and temporal resource partitioning between juvenile plaice and dab allowing the co-existence of morphologically similar species in nursery grounds. In the limited survey years there was no evidence that the carrying capacity of the studied nursery grounds was reached but spatial and interannual variations in fish growth indicated fluctuating environments in terms of food availability, predator densities, sediment features and physico-chemical conditions. Predation was the most important factor affecting habitat quality for juvenile plaice and dab with crab densities negatively correlated to fish condition whereas shrimp densities were negatively associated with densities of small-sized juveniles in spring. A comparison of proxies for fish growth showed the advantage of Fulton’s K for routine use whereas RNA:DNA ratios proved less powerful when short-term environmental fluctuations are lacking. This study illustrated how distinct sets of habitat features can drive spatial variation in density and condition of juvenile flatfish highlighting the value of studying both variables when modeling habitat requirements. The habitat models generated in this study also provide a powerful tool to predict potential climate and anthropogenic impacts on the distribution and condition of juveniles in flatfish nurseries. The need for effective coastal zone management was emphasized to ensure a sustainable use of coastal resources and successful flatfish recruitment to the fishery.

Debranching Solutions in Endografting for Complex Thoracic Aortic Dissections

Background: Conventional surgical repair of thoracic aortic dissections is a challenge due to mortality and morbidity risks. Objectives: We analyzed our experience in hybrid aortic arch repair for complex dissections of the aortic arch. Methods: Between 2009 and 2013, 18 patients (the mean age of 67 ± 8 years-old) underwent hybrid aortic arch repair. The procedural strategy was determined on the individual patient. Results: Thirteen patients had type I repair using trifurcation and another patient with bifurcation graft. Two patients had type II repair with replacement of the ascending aorta. Two patients received extra-anatomic bypass grafting to left carotid artery allowing covering of zone 1. Stent graft deployment rate was 100%. No patients experienced stroke. One patient with total debranching of the aortic arch following an acute dissection of the proximal arch expired 3 months after TEVAR due to heart failure. There were no early to midterm endoleaks. The median follow-up was 20 ± 8 months with patency rate of 100%. Conclusion: Various debranching solutions for different complex scenarios of the aortic arch serve as less invasive procedures than conventional open surgery enabling safe and effective treatment of this highly selected subgroup of patients with complex aortic pathologies.

Convex and toric geometry to analyze complex dynamics in chemical reaction systems

Convex cone, toric variety, graph theory, electrochemical catalysis, oxidation of formic acid, feedback-loopsbifurcations, enzymatic catalysis, Peroxidase reaction, Shil'nikov chaos

Analysis of complex microwave structures using suitable computational electromagnetic techniques

Complex Microwave Structures Wake Field Computatation PETRA III Generalized Multipole Technique Antenna Antennen Wakefelder Berechnung

Ricci-flat complex geometry and its applications

Magdeburg, Univ., Fak. für Mathematik, Habil.-Schr., 2010