The influence of key chemical constituents in activated sludge on surface and flocculating properties

This paper examines the influence of the chemical constituents of activated sludge and extracted extracellular polymeric substances (EPS) on the surface properties, hydrophobicity, surface charge (SC) and flocculating ability (FA) of activated sludge floes. Activated sludge samples from 7 different full-scale wastewater treatment plants were examined. Protein and humic substances were found to be the dominant polymeric compounds in the activated sludges and the extracted EPS, and they significantly affected the FA and surface properties, hydrophobicity and SC, of the sludge floes. The polymeric compounds proteins, humic substances and carbohydrates in the sludge floes and the extracted EPS contributed to the negative SC, but correlated negatively to the hydrophobicity of sludge floes. The quantity of protein and carbohydrate within the sludge and the extracted EPS was correlated positively to the FA of the sludge floes, while increased amounts of humic substances resulted in lower FA. In contrast, increased amounts of total extracted EPS had a negative correlation to FA. The results reveal that the quality and quantity of the polymeric compounds within the sludge floes is more informative, with respect to understanding the mechanisms involved in flocculation, than if only the extracted EPS are considered. This is an important finding as it indicates that extracting EPS may be insufficient to characterise the EPS. This is due to the low extraction efficiency and difficulties involved in the separation of EPS from other organic compounds. Correlations were observed between the surface properties and FA of the sludge floes., This confirms that the surface properties of the, sludge flocs play an important role in the bioflocculation process but that also other interactions like polymer entanglement are important. (C) 2002 Elsevier Science Ltd. All rights reserved.

Effects of heat treatment on the nutritional value of raw soybean selected for low trypsin inhibitor activity

1. Two broiler experiments and a layer experiments were conducted on Kunitz trypsin inhibitor (Kti) soybeans (SB) of low trypsin inhibitor (TI) activity to determine their nutritive value when included as mash in least-cost poultry diets. 2. Experiment 1 compared chick performance on the Kti or raw SB using a commercial full-fat SB meal (FFSBM) and a solvent extracted SB meal (SBM) as controls during a 20 d experimental period. Broiler experiment 2 compared Kti and raw SB, non-steamed, or steam-pelleted with and without DL-methionine supplementation added to every treatment containing 170 g SB/kg. For each broiler experiment the levels of each SB were 70, 120 and 170 g/kg with the control birds fed only 170 g SB/kg. 3. The layer experiment, compared steam-pelleted Kti and raw SB against a non-steamed Kti and raw SB each fed at two levels (70 and 110 g/kg) x 30 replicates from 29 weeks of age for 19 weeks in a completely randomised design. Production parameters were measured when diets were formulated to contain minimum required specifications and calculated apparent metabolisable energy (AME). At the completion of each trial, 2 broiler birds from each cage and 5 layer birds per treatment were killed, weighed, and their liver and pancreas weighed. 4. Both broiler experiments indicated that production parameters on the Kti SB treatments were significantly lower (P < 0.05) than on the two commercial control SB treatments. However, the Kti treatments were superior to the raw SB treatments. 5. Pancreas weight increased with increasing inclusion of both raw and Kti SB, suggesting that a TI was causing the depression in performance. The AME of the Kti SB was similar to that of commercial FFSB meal. After steam conditioning, the raw SB meal AME value of 9.5 MJ/kg dry matter (DM) was improved to 14.1 MJ/kg DM by reduced TI activity, but this AME improvement with TI activity reduction, plus the supplementation with DL-methionine on birds fed the raw SB had no effect (P > 0.05) on any parameter evaluated in experiment 2. 6. The layer experiment showed that hens on the Kti SB treatments had significantly greater live weight gain (LWG), egg weight and daily egg mass than birds given raw SB. A reduced food intake (FI) was observed in the Kti treatments but egg mass was generally similar to that on the FFSB control diet, indicating that Kti SB supported excellent egg production at an inclusion of 110 g/kg. The depressed performance observed for broiler chicks suggest that younger birds are more susceptible to the effects of SB TI.

Characterization of the types of the Neotropical Pseudisobrachium (Hymenoptera: Bethylidae), with a key to species

Atualmente é difícil reconhecer a identidade de muitas espécies neotropicais de Pseudisobrachium Kieffer, 1904, principalmente por que as descrições e ilustrações disponíveis não são suficientes para permitir identificações precisas. Para resolver este problema, foram examinadas 115 espécies válidas, além de seus sinônimos juniores. Foram realizados doze atos nomenclaturais, e reconhecidas 110 espécies válidas para a região Neotropical. Foram designados dois lectótipos: Pristocera crassicornis Westwood and Pristocera haemorrhoidalis Westwood. Foram propostas sete sinonímias novas para espécies: Pseudisobrachium retusum Evans syn. nov. de P. pauxillum Evans; P. cunco Perez syn. nov. de P. erythrocephalum Evans; P. navajo Evans, P. rectangulatum Evans, P. emarginatum Evans e P. foutsi Evans syn. nov. de P. flavinervis Fouts; P. acuminatum Waichert & Azevedo syn. nov. de P. latum Waichert & Azevedo. Foi proposta a seguinte sinonímia nova para gênero: Parisobrachium Kieffer syn. nov. de Dissomphalus Ashmead. Foi estabelecida a seguinte combinação nova e revalidado o nome: Dissomphalus albipes (Kieffer) comb. nov. e nom. rev. de Pseudisobrachium paraguayense Kieffer.

Influência da luminosidade na fisiologia e morfoanatomia de jequitibá branco (Cariniana estrellensis (Raddi.) Kuntze) e jequitibá rosa (Cariniana legalis (Mart.) Kuntze)

Cariniana estrellensis (Raddi.) Kuntze e C. legalis (Mart.) Kuntze são arbóreas nativas do Brasil que, além de possuírem alto poder econômico, são objeto de interesse em programas de recuperação de áreas degradadas e em plantios comerciais. A escassez de informações relacionadas ao desempenho ecofisiológico dessas espécies em condições ambientais estressantes dificultam o manejo e conservação das mesmas. Dessa forma, o presente estudo objetivou avaliar a ecofisiologia das espécies em um gradiente de irradiância, por meio de dois experimentos. No experimento 1, plantas de C. estrellensis com 12 meses de idade foram submetidas a quatro tratamentos: 40%, 50%, 70% e 100% de irradiância, durante 104 dias. Ao final desse período foram feitas análises de crescimento, do conteúdo de pigmentos fotossintéticos, de trocas gasosas, da fluorescência da clorofila a, do conteúdo foliar de carboidratos solúveis, das características anatômicas foliares e caulinares e da plasticidade fenotípica da espécie. No experimento 2, plantas de C. estrellensis e C. legalis com 14 meses de idade foram submetidas a dois tratamentos: 30% e 100% de irradiância (sombra e sol, respectivamente), durante 30 dias. Ao final desse período foram feitas análises do estresse oxidativo das espécies, por meio da quantificação da atividade das enzimas catalase e peroxidase do ascorbato e por meio da quantificação do conteúdo foliar de pigmentos fotossintéticos. No experimento 1, em 70% de irradiância, as plantas apresentaram melhor crescimento em altura e diâmetro, maior massa seca de folhas (MSF), de caule (MSC) e de raiz (MSR). Em 70% e 100% de irradiância, as plantas apresentaram folhas menores (AFU) e mais espessas (AFE e MFE) resultando em menor área foliar total (AFT). Nesses tratamentos as plantas também apresentaram menor conteúdo foliar de clorofila a (Chl a) e b (Chl b), porém, maior razão Chl a/b e maior conteúdo de carotenóides, o que implicou em menor razão Chl a/Carot. Taxas fotossintéticas maiores foram encontradas nas plantas em 70% e inibidas em 40% e 50%, em função da baixa irradiância solar, e em 100%, possivelmente pela ocorrência de fotoinibição, como mostraram os parâmetros do fluxo de energia do fotossistema II. De acordo com a análise da fluorescência da clorofila a, em pleno sol, as plantas apresentaram menor densidade de centros de reação ativos (RC/ABS) e maior dissipação de energia (DI0/ABS), culminando com menor desempenho do fotossistema II (PIabs) e desempenho total (PITotal). O conteúdo foliar de carboidratos solúveis foi maior nas plantas em 70%, seguido das plantas em 100% de irradiância, com exceção da glicose, que não variou entre os tratamentos. A maior espessura encontrada nas folhas sob 100% de irradiância foi em função da maior espessura das epidermes adaxial e abaxial e dos parênquimas paliçádico e esponjoso. E o maior diâmetro do caule em 70% de irradiância se deu pela maior espessura do xilema e floema secundários. No experimento 2, as plantas em pleno sol de ambas as espécies também apresentaram menor conteúdo foliar de clorofila a (Chl a) e b (Chl b) e maior razão Chl a/b. No entanto, o conteúdo de carotenóides foi maior, o que implicou em menores razões Chl a/Carot. A atividade da catalase (CAT) variou em função do tempo e da espécie, apresentando uma queda em C. estrellensis aos 16 dias, possivelmente em função de fotoinativação, e um aumento em C. legalis aos 30 dias. Já a atividade da peroxidase do ascorbato (APX) não variou em função do tempo, da espécie ou dos tratamentos. O estudo da plasticidade fenotípica mostrou que C. estrellensis é uma espécie plástica, principalmente em função das variáveis de fotossíntese e trocas gasosas, sendo capaz de sobreviver no gradiente de irradiância testado, o que viabiliza o seu uso em projetos de recuperação de áreas degradadas. E, uma vez que as análises ecofisiológicas mostraram que C. estrellensis e C. legalis apresentaram melhor desempenho em luminosidade moderada, sugere-se que ambas comportaram-se como espécies intermediárias no processo de sucessão florestal. No entanto, uma vez que a concentração de pigmentos foliares e a produção de enzimas antioxidantes inferiram maior susceptibilidade de C. estrellensis à fotoinibição em alta irradiância, sugere-se maior viabilidade do uso de C. legalis em projetos de recuperação de áreas degradas.

Práticas e saberes da professora pomerana : um estudo sobre interculturalidade

Esta pesquisa analisa práticas e saberes da professora pomerana em uma escola do campo de ensino fundamental em Santa Maria de Jetibá/Estado do Espírito Santo/Brasil, para problematizar questões sobre cultura e interculturalidade. Aprofundam-se reflexões sobre quais têm sido as contribuições dessas práticas para uma educação escolar intercultural. Beneficia-se do estudo de caso para análise de documentos, observações de aulas, observações participantes em planejamentos, realização de entrevista semiestruturada com a professora e, anotações no diário de campo. Situam-se brevemente questões da história dos descendentes de pomeranos, bem como sobre as principais produções acadêmicas referentes à educação desse povo tradicional. Discussões teórico-metodológicas contribuem para compreensão e embasamento de alguns conceitos-chave, como: cultura(s) (THOMPSON, 1995; GEERTZ, 2012), interculturalismo (CANDAU, 2005; FORNET-BETANCOURT, 2004), cultura escolar e cultura da escola (FORQUIN, 1993), práticas docentes (FREIRE, 1996), saberes docentes (TARDIF, 2012), parceria (FOERSTE, 2005) etc. Aponta-se que as práticas da professora pomerana faziam parte do contexto escolar antes da implementação do Programa de Educação Escolar Pomerana (PROEPO) no que se refere ao uso oral da língua pomerana na sala de aula. As práticas da professora se ressignificam na interação com os saberes culturais, experienciais e coletivos produzidos na dinâmica escolar e comunitária. Essas práticas possibilitam o diálogo da cultura escolar com a cultura da escola, promovendo a vivência das experiências locais e o acesso ao saber universal. Pode-se afirmar que no contexto da escola investigada existem algumas condições que favorecem a dimensão da interculturalidade nos processos pedagógicos. Cabe aprofundar estudos sobre as contribuições da educação escolar para o ensino bilíngue e seus impactos à valorização da cultura pomerana e a consequente manutenção da língua deste povo tradicional. Tensões e conflitos foram identificados quanto ao enfoque do PROEPO ao desenvolvimento das habilidades de leitura e escrita em língua pomerana.

A brief survey on online analysis of movement data

The increasing availability of mobility data and the awareness of its importance and value have been motivating many researchers to the development of models and tools for analyzing movement data. This paper presents a brief survey of significant research works about modeling, processing and visualization of data about moving objects. We identified some key research fields that will provide better features for online analysis of movement data. As result of the literature review, we suggest a generic multi-layer architecture for the development of an online analysis processing software tool, which will be used for the definition of the future work of our team.

Conception of a flexible integrator and lean model for integrated management systems

Management systems standards (MSSs) have developed in an unprecedented manner in the last few years. These MSS cover a wide array of different disciplines, aims and activities of organisations. Also, organisations are populated with an enormous diversity of independent management systems (MSs). An integrated management system (IMS) tends to integrate some or all components of the business. Maximising their integration in one coherent and efficient MS is increasingly a strategic priority and constitutes an opportunity for businesses to be more competitive and consequently, promote its sustainable success. Those organisations that are quicker and more efficient in their integration and continuous improvement will have a competitive advantage in obtaining sustainable value in our global and competitive business world. Several scholars have proposed various theoretical approaches regarding the integration of management sub-systems, leading to the conclusion that there is no common practice for all organisations as they encompass different characteristics. One other author shows that several tangible and intangible gains for organisations, as well as to their internal and external stakeholders, are achieved with the integration of the individual standardised MSs. The purpose of this work was to conceive a model, Flexible, Integrator and Lean for IMSs, according to ISO 9001 for quality; ISO 14001 for environment and OHSAS 18001 for occupational health and safety (IMS–QES), that can be adapted and progressively assimilate other MSs, such as, SA 8000/ISO 26000 for social accountability, ISO 31000 for risk management and ISO/IEC 27001 for information security management, among others. The IMS–QES model was designed in the real environment of an industrial Portuguese small and medium enterprise, that over the years has been adopting, gradually, in whole or in part, individual MSSs. The developed model is based on a preliminary investigation conducted through a questionnaire. The strategy and research methods have taken into consideration the case study. Among the main findings of the survey we highlight: the creation of added value for the business through the elimination of several organisational wastes; the integrated management of the sustainability components; the elimination of conflicts between independent MS; dialogue with the main stakeholders and commitment to their ongoing satisfaction and increased contribution to the company’s competitiveness; and greater valorisation and motivation of employees as a result of the expansion of their skill base, actions and responsibilities, with their consequent empowerment. A set of key performance indicators (KPIs) constitute the support, in a perspective of business excellence, to the follow up of the organisation’s progress towards the vision and achievement of the defined objectives in the context of each component of the IMS model. The conceived model had many phases and the one presented in this work is the last required for the integration of quality, environment, safety and others individual standardised MSs. Globally, the investigation results, by themselves, justified and prioritised the conception of an IMS–QES model, to be implemented at the company where the investigation was conducted, but also a generic model of an IMS, which may be more flexible, integrator and lean as possible, potentiating the efficiency, added value both in the present and, fundamentally, for future.

Estimating Local Part Thickness in Midplane Meshes for Finite Element Analysis

Within the development of motor vehicles, crash safety (e.g. occupant protection, pedestrian protection, low speed damageability), is one of the most important attributes. In order to be able to fulfill the increased requirements in the framework of shorter cycle times and rising pressure to reduce costs, car manufacturers keep intensifying the use of virtual development tools such as those in the domain of Computer Aided Engineering (CAE). For crash simulations, the explicit finite element method (FEM) is applied. The accuracy of the simulation process is highly dependent on the accuracy of the simulation model, including the midplane mesh. One of the roughest approximations typically made is the actual part thickness which, in reality, can vary locally. However, almost always a constant thickness value is defined throughout the entire part due to complexity reasons. On the other hand, for precise fracture analysis within FEM, the correct thickness consideration is one key enabler. Thus, availability of per element thickness information, which does not exist explicitly in the FEM model, can significantly contribute to an improved crash simulation quality, especially regarding fracture prediction. Even though the thickness is not explicitly available from the FEM model, it can be inferred from the original CAD geometric model through geometric calculations. This paper proposes and compares two thickness estimation algorithms based on ray tracing and nearest neighbour 3D range searches. A systematic quantitative analysis of the accuracy of both algorithms is presented, as well as a thorough identification of particular geometric arrangements under which their accuracy can be compared. These results enable the identification of each technique’s weaknesses and hint towards a new, integrated, approach to the problem that linearly combines the estimates produced by each algorithm.

Integration of Individualized Management Systems (MSs) as an Aggregating Factor of Sustainable Value for Organizations: An Overview Through a Review of the Literature

Nowadays, there exist various standards for individual management systems (MSs), at least, one for each stakeholder. New ones will be published. An integrated management system (IMS) aims to integrate some or all components of the business into one coherent and efficient MS. Maximizing integration is more and more a strategic priority in that it constitutes an opportunity to eliminate and/or reduce potential factors of destruction of value for the organizations and also to be more competitive and consequently promote its sustainable success. A preliminary investigation was conducted on a Portuguese industrial company which, over the years, has been adopting gradually, in whole or in part, individualized management system standards (MSSs). A research, through a questionnaire, was performed with the objective to develop, in a real business environment, an adequate and efficient IMS-QES (quality, environment, and safety) model and to potentiate for the future a generic IMS model to integrate other MSSs. The strategy and research methods have taken into consideration the case study. It was obtained a set of relevant conclusions resulting from the statistical analyses of the responses to the survey. Globally, the investigation results, by themselves, justified and prioritized the conception of a model of development of the IMS-QES and consequent definition and validation of a structure of an IMS-QES model, to be implemented at the small- and medium-sized enterprise (SME) where the investigation was conducted.

La innovación de los procesos - diferenciación en los servicios turísticos

The innovation contributes to business success and increased competitive advantage, one of the concepts that has deserved more attention among researchers in the field of management. Innovation is not exclusive of tangible products or services and can naturally extend to the process itself, the organization or marketing. Although it is not easy to gather a universal concept for innovation, do not seem to be no doubt that its importance is such that allows the company to build on the foundations of this future development, regardless of past success. This work has as its central purpose the study of process innovation in the supply outlook for tourism, given its importance in achieving business success. The recognition of its value assumes it as a challenge, making it necessary to distinguish with product, marketing and organizational innovation, either in substance or in the organizational competencies. Will be presented in this work, a brief description (as well as evolution of the concept) as a way of contextualizing and, then, clarified the distinction between the concepts process innovation and innovation process. Search will bring together the key distinguishing features from the perspective of tourism as a means of achieving competitive advantage for business. We will also discuss implications for management and future studies.

Linking customer satisfaction, quality, and strategic planning

By acknowledging and dissecting the interconnected roles of customer satisfaction, quality, and strategic planning, this paper provides an analytical framework for creating a customer-driven organization and culture. It shows how quality starts and ends with the customer. Companies that are achieving long-term continuous improvement in quality tailored to customer satisfaction possess lasting characteristics such as customer orientation, customer consciousness, and customer responsiveness. In doing so, they liberate the quality concept from the narrow product or service focus to encompass total conformance to customer requirements in spite of the existing functionalization and departmentalization of modern complex structures. In addition to these key components, a customer-driven organization demands building and nurturing a customer satisfaction culture and value system that makes quality improvement and heightened concern for customer satisfaction a permanent aspect of organizational life.