978 resultados para Inventory control methods
Resumo:
В статье представлена комплексная информационная технология для безсловесной коммуникации между людями с проблемами слуха, основанная на жестомимическом языке.
Resumo:
The traditional use of global and centralised control methods, fails for large, complex, noisy and highly connected systems, which typify many real world industrial and commercial systems. This paper provides an efficient bottom up design of distributed control in which many simple components communicate and cooperate to achieve a joint system goal. Each component acts individually so as to maximise personal utility whilst obtaining probabilistic information on the global system merely through local message-passing. This leads to an implied scalable and collective control strategy for complex dynamical systems, without the problems of global centralised control. Robustness is addressed by employing a fully probabilistic design, which can cope with inherent uncertainties, can be implemented adaptively and opens a systematic rich way to information sharing. This paper opens the foreseen direction and inspects the proposed design on a linearised version of coupled map lattice with spatiotemporal chaos. A version close to linear quadratic design gives an initial insight into possible behaviours of such networks.
Resumo:
This study describes an optimised modulation strategy based on switching state sequences for the hybrid-clamped multilevel converter. Two key control variables defined as 'phase shift angle' and 'switching state change' for a five-level hybrid-clamped inverter are proposed to improve all switches' operation, and by changing their values, different control methods can be obtained for modulation optimisation purposes. Two example methods can solve the voltage imbalance problem of the dc-link capacitors and furthermore avoid two switches' simultaneous switching transitions and improve the inverter's performance as compared with the traditional phase disposition pulse-width modulation strategy. A 6 kW prototype inverter is developed and a range of simulation and experiments are carried out for validation. It is found that simulation and experimental results are in a good agreement and the proposed modulation strategy is verified in terms of low-order harmonic reduction.
Resumo:
Switched reluctance motors (SRMs) can provide an attractive traction drive for electric vehicle applications. To lower the investment in the off-board charging station facilities, a multi-functional switched reluctance motor topology is proposed on the basis of the traditional asymmetrical half-bridge converter. The SRM phase windings are employed as input filter inductors and centre-tapped windings are also developed to form symmetrical inductors for three-phase grid supply. Owing to the varying rotor position, phase inductors are unequal between one another. A hysteresis control scheme is therefore developed for grid-connection operation. In addition to AC supplies, the proposed topology can also supports the DC-source charging. A new current sharing strategy is employed to diminish the influence of the unequal winding inductances. The simulation and experimental tests are carried out to verify the proposed topology and control methods. Since this work eliminates the need for building charging station infrastructure, its potential economic impact on the automotive market can be significant.
Resumo:
Purpose: Several studies have suggested accommodative lags may serve as a stimulus for myopic growth, and while a blurred foveal image is believed to the main stimulus for accommodation, spectral composition of the retinal image is also believed to influence accommodative accuracy. Of particular interest is how altering spectral lighting conditions influences accommodation in the presence of soft multifocal contact lenses, which are currently being used off-label for myopia control. Methods: Accommodative responses were assessed using a Grand Seiko WAM-5500 autorefractor for four target distances: 25, 33, 50, and 100cm for 30 young adult subjects (14 myopic, 16 emmetropic; mean refractive errors (±SD, D) -4.22±2.04 and -0.15±0.67 respectively). Measurements were obtained with four different soft contact lenses, Single vision distance (SVD), Single vision near (SVN), Centre-Near (CN) and Centre-Distance (CD) (+1.50 add), and three different lighting conditions: red (peak λ 632nm), blue (peak λ 460nm), and white (peak λ 560nm). Corrections for chromatic differences in refraction were made prior to calculating accommodative errors. Results: The size of accommodative errors was significantly affected by lens design (p<0.001), lighting (p=0.027), and target distance (p=0.009). Mean accommodative errors were significantly larger with the SV lenses compared to the CD and CN designs (p<0.001). Errors were also significantly larger under blue light compared to white (p=0.004) and a significant interaction noted between lens design and lighting (p<0.001). Blue light generally decreased accommodative lags and increased accommodative leads relative to white and red light, the opposite was true of red light (p≤0.001). Lens design also significantly influenced direction of accommodative error (i.e. lag or lead) (p<0.001). Interactions with or between refractive groups were not found to be statistically significant for either the magnitude or direction of accommodative error (p>0.05 for all). Conclusions: Accuracy of accommodation is affected by both lens design and by wavelength of lighting. These accommodative lag data lend some support to recent speculation about the potential therapeutic value of lighting with a spectral bias towards blue during near work for myopia, although such treatment effects are likely to be more subtle under broad compared to the narrow spectrum lighting conditions used here.
Resumo:
By the strengthening of environmental protection and food safety efforts in Hungary, integrated and especially biological pest control methods should increasingly put forward, for which a solid knowledge on the life course and efficiency of natural enemies applied against certain pests is necessary. Pepper has distinguished significance in domestic vegetable forcing, and the profitability of production is determined primarily by the efficiency of the control of thrips pests. This is why we attached great importance to study what results may be expected by introducing arthropod predators (Amblyseius cucumeris, Orius laevigatus) to control thrips species under domestic conditions on rock wool in a long vegetation period pepper culture. We also liked to find out what kind of role the cultivars play in the change of phytophagous and zoophagous populations. The A. cucumeris predatory mite introduced in late January proved to be effective in controlling thrips pests until mid-April. Despite repeated introductions, the predatory bug O. laevigatus (Heteroptera: Anthocoridae) did not proliferate. Among the three pepper cultivars (Hó, Keceli, Titán) grown at Ráckeve, thrips species proliferated in the highest number on cultivar ‘Hó’, while the population of predatory mites was lowest on the cultivar ‘Titán’, compared to the other two cultivars.
Resumo:
Insecticide treated bed nets and indoor residual spraying are the most widely used vector control methods in Africa. The World Health Organization now recommends four classes of insecticides for use against adult mosquitoes in public health programs. Of these four classes of insecticides, pyrethroids have become the insecticides of choice in treating mosquito bed nets and in the use of indoor spraying to prevent malaria transmission. Pyrethroids are not only used in malaria control but also in agriculture to protect against pest insects. This concurrent use of pyrethroids in vector control and protection of crops from pests in agriculture may exert selection pressure on mosquito larval population and induce resistance to this class of insecticides. The main objective of our study was to explore the role of agricultural chemicals and the response of mosquitoes to pyrethroids in an area of high malaria transmission.
We used a cross-sectional study design. This was a two-step study involving both mosquitoes and human subjects. In this study, we collected larvae growing in breeding sites affected by different agricultural practices. We used purposive sampling to identify active mosquito breeding sites and then interviewed households adjacent to those breeding sites to learn about their agricultural practices that might influence the response of mosquitoes to pyrethroids. We also performed secondary analysis of larval data from a previous case-control study by Obala et al.
Resumo:
The two potato cyst nematode species, Globodera pallida and G. rostochiensis, are among the most important pests of potato. PCN are difficult to manage, while the two species respond differently to the main control methods. An increase in the incidence of G. pallida had been reported and is generally attributed to greater effectiveness of control measures against G. rostochiensis. The status of PCN in Ireland was studied using PCR. The results demonstrated qPCR to be an efficient means of high-throughput PCN sampling, being able to accurately identify both species in mixed-species populations. Species discrimination using qPCR revealed an increase in the incidence of G. pallida in Ireland in the absence of G. pallida-selective control measures. The population dynamics of G. pallida and G. rostochiensis in Ireland were studied in mixed- and single-species competition assays in vivo. G. pallida proved to be the more successful species, with greater multiplication in mixed- than single-species populations, with G. rostochiensis showing the opposite. This effect was similarly observed in staggered inoculation trials and population proportion trials. It was hypothesised that the greater G. pallida competitiveness could be attributed to its later hatch. G. pallida exhibited a later peak in hatching activity and more prolonged hatch, relative to G. rostochiensis. G. rostochiensis hatch was significantly reduced in mixedspecies hatching assays. G. pallida hatch was significantly higher when hatch was induced in potato root leachates containing G. rostochiensis-specific compounds, indicating that G. pallida hatch is stimulated upon perception of G. rostochiensis–derived compounds. Rhizotron studies revealed that root damage, caused by feeding of the early-hatching G. rostochiensis, resulted in increased lateral root proliferation and significantly increased G. pallida multiplication. Split-root trials indicated a significant G. pallida-induced ISR effect. G. rostochiensis multiplication was significantly reduced in split-root rhizotrons when G. pallida colonised roots before or after G. rostochiensis infection.
Resumo:
Production Planning and Control (PPC) systems have grown and changed because of the developments in planning tools and models as well as the use of computers and information systems in this area. Though so much is available in research journals, practice of PPC is lagging behind and does not use much from published research. The practices of PPC in SMEs lag behind because of many reasons, which need to be explored. This research work deals with the effect of identified variables such as forecasting, planning and control methods adopted, demographics of the key person, standardization practices followed, effect of training, learning and IT usage on firm performance. A model and framework has been developed based on literature. Empirical testing of the model has been done after collecting data using a questionnaire schedule administered among the selected respondents from Small and Medium Enterprises (SMEs) in India. Final data included 382 responses. Hypotheses linking SME performance with the use of forecasting, planning and controlling were formed and tested. Exploratory factor analysis was used for data reduction and for identifying the factor structure. High and low performing firms were classified using a Logistic Regression model. A confirmatory factor analysis was used to study the structural relationship between firm performance and dependent variables.
Resumo:
Université de Mons, Dissertation, 2016
Resumo:
La empresa Coservicios S.A. maneja dentro de su almacén miles de referencias las cuales deben ser controladas para mantener los niveles de inventarios óptimos, por lo que requieren hacer pronósticos de la demanda de las referencias que manejan para hacer una mejor planeación, pero al tratarse de miles de referencias es muy complicado estudiar el modelo de pronósticos que mejor describe el comportamiento de cada una de las referencias por los altos tiempos que estos cálculos demoran en realizarse, en este caso la empresa requiere calcular los pronósticos de 576 referencias correspondientes a un grupo piloto -- El proyecto de grado que se presenta aplica una metodología en donde se pueden calcular los pronósticos de cientos de referencias a partir de identificar algunas referencias denominadas pivotes, en donde al conocer los pronósticos de las referencias pivotes aplicándole a estas la MUP (Metodología Universal de pronósticos) se pueden calcular los demás pronósticos sin necesidad de aplicar rigurosamente la metodología de pronósticos a cada referencia -- El primer paso es realizar un análisis previo a todas las referencias a las que se les requiere calcular los pronósticos en donde se miden algunas características estadísticas, matemáticas y propias del negocio como el coeficiente Alfa de Cronbach, rotación del inventario, correlaciones, variabilidad, pruebas de función de autocorrelación(ACF) y coeficiente de Determinación muestral r2 -- Las referencias pivotes son identificadas y se les aplica la metodología universal de pronósticos (MUP) para seleccionar el modelo de pronósticos que mejor describa cada una de la referencias pivotes así obteniendo los pronósticos correspondientes, luego se calcula la función de correlación multipoliomial lineal donde se encuentra cual es la relación de las referencias pivotes con cada una de las otras referencias dependientes de estas pivotes -- La función de correlación multipolinomial que relaciona cada una de las referencias pivotes con las otras referencias es utilizada para calcular los pronósticos de todas las referencias restantes -- El último paso del proyecto es realizar diferentes comparaciones de la exactitud de las proyecciones entre el modelo utilizado en la empresa Coservicios S.A. para realizar sus pronósticos con la metodología de referencias múltiples empleada en este proyecto de grado
Resumo:
Human malaria is responsible for over 700,000 deaths a year. To stay abreast of the threat posed by the parasite, a constant stream of new drugs and vector control methods are required. This study focuses on a vaccine that has the potential to protect against parasite infection, but has been hindered by developmental challenges. In malaria prevention, live, attenuated, aseptic, Plasmodium falciparum sporozoites (PfSPZ) can be administered as a highly protective vaccine. PfSPZ are produced using adult female Anopheles stephensi mosquitoes as bioreactors. Production volume and cost of a PfSPZ vaccine for malaria are expected to be directly correlated with Plasmodium falciparum infection intensity in the salivary glands. The sporogonic development of Plasmodium falciparum in A. stephensi to fully infected salivary gland stage sporozoites is dictated by the activities of several known components of the mosquito’s innate immune system. Here I report on the use of genetic technologies that have been rarely, if ever, used in Anopheles stephensi Sda500 to increase the yield of sporozoites per mosquito and enhance vaccine production. By combining the Gal4/UAS bipartite system with in vivo expression of shRNA gene silencing, activity of the IMD signaling pathway downstream effector LRIM1, an antagonist to Plasmodium development, was reduced in the midgut, fat body, and salivary glands of A. stephensi. In infection studies using P. berghei and P. falciparum these transgenic mosquitoes consistently produced significantly more salivary gland stage sporozoites than wildtype controls, with increases in P. falciparum ranging from 2.5 to 10 fold. Using Plasmodium infection assays and qRT-PCR, two novel findings were identified. First, it was shown that 14 days post Plasmodium infection, transcript abundance of the IMD immune effector genes LRIM1, TEP1 and APL1c are elevated, in the salivary glands of A. stephensi, suggesting the salivary glands may play a role in post midgut defense against the parasite. Second, a non-pathogenic IMD signaling pathway response was observed which could suggest an alternative pathway for IMD activation. The information gained from these studies has significantly increased our knowledge of Plasmodium defense in A. stephensi and moreover could significantly improve vaccine production.
Resumo:
Thaumastocoris peregrinus (Hemiptera: Thaumastocoridae ) is an insect from Australia which is causing severe damage to eucalyptus crops around the world. When feeding from the leaves sap, it causes bronzening, and in extreme cases, may lead to the tree death. Control methods have been studied and the most promising so far is the egg parasitoid Cleruchoides noackae (Hymenoptera: Mymaridae). Alternative products from plants with insecticidal properties could also be a viable option, and they might even be used concomitantly with C. noackae, aiming for a most effective control, but still safe for the environment. Thus, the objective of this work was to verify the action of 5% aqueous plant extracts of Matricaria chamomilla, Echinodorus grandiflorus, Punica granatum, Maytenus ilicifolia a n d Origanum majorana on T. peregrinus. In addition, we aimed to study the extracts potential toxicity to C. noackae and Gallus domesticus L., since the plant compounds might have negative effect upon the non-target organisms. At first, HPLC (High Performance Liquid Chromatography) was used to verify which phenolic compounds would be found in the plant extracts. These were tested on bronze bug adults, in confinement test (to verify the insecticidal action of the extracts) and free-choice test (to verify the repellency). The extracts that showed better results were selected for further tests with non-target organisms. Regarding C. noackae, pre-parasitism and post-parasitism, confinement and free-choice tests were performed to verify if the extracts would affect the host-choosing by the female or the development of the immature stages of the parasitoid. To verify if the extracts would be toxic to G. domesticus, the plant extracts were added to young birds feed for five days. Parameters such as weight gain, food intake, quantification of serum enzymes and histopathological analysis were carried out. HPLC analysis detected gallic, ferulic, vanillic, caffeic and cumaric acid in the extracts samples. All plant extracts tested reduced T. peregrinus survival, but E. grandiflorus, Matricaria chamomilla Maytenus ilicifolia had also a repellent effect, and were tested on the non-target organisms. None of these extracts affected neither the host choice by C. noackae nor adult emergency, when compared to the control group. In addition, the extracts did not cause alterations in any of the studied parameters. Thus, we verified that E. grandiflorus, Matricaria chamomilla and Maytenus ilicifolia have potential to be used to control T. peregrinus and are safe to C. noackae and G. domesticus.
Resumo:
Työssä luodaan energiapuun varastonhallintamalli ja hankintamalli energiantuotantolaitoksen näkökulmasta sekä kuvataan kustannustehokkaita ja toimitusvarmoja vaihtoehtoja puupolttoaineen varastoinnille ja haketukselle. Varastonhallintamallissa keskitytään varastotason hallintamenetelmiin toimintaympäristössään. Hankintamalli määrittää oman varaston ja suoran laitostoimituksen suhteen sekä auttaa pohtimaan strategisen hankinnan merkitystä hankinnan toteuttamiseen ja hankintakanavien valintaan. Työ antaa vastauksia koko hankintatoiminnan toteutukseen ja hallitsemiseen. Varastonhallintamallin skenaariotarkastelussa selvisi, että yrityksen oma varasto vaatii 18 – 37 % varmuusvaraston suhteessa käyttövarastoon. Hankintamallin mukaan oman varaston kannattavimman puupolttoainejakeen hankintaetäisyys voisi olla keskimäärin korkeintaan 96 km. Tarpeen, saatavuuden, jakeiden kustannustasojen ja toimintaympäristön mahdollisuuksien ollessa selvillä, on mahdollista tehdä päätöksiä hankintakanavista ja varmuusvarastoista kustannustehokkuuden perusteella. Yrityksen polttoainemäärien ohjauksen toteutukseen vaaditaan kehittämistoimia. Oman toimintaympäristön vakiointi ja toimintamallien dokumentointi on tärkeää tiedonjaon, toimitussopimusten mitoittamisen ja toiminnan kehittämisen kannalta. Toiminnan pullonkaulojen vähentäminen ja puupolttoaineen ohjaaminen kustannustehokkaimpien haketusketjujen kautta mahdollisimman tehokkaasti synnyttävät kustannussäästöjä toimitusketjussa.
Resumo:
Nowadays, risks arising from the rapid development of oil and gas industries are significantly increasing. As a result, one of the main concerns of either industrial or environmental managers is the identification and assessment of such risks in order to develop and maintain appropriate proactive measures. Oil spill from stationary sources in offshore zones is one of the accidents resulting in several adverse impacts on marine ecosystems. Considering a site's current situation and relevant requirements and standards, risk assessment process is not only capable of recognizing the probable causes of accidents but also of estimating the probability of occurrence and the severity of consequences. In this way, results of risk assessment would help managers and decision makers create and employ proper control methods. Most of the represented models for risk assessment of oil spills are achieved on the basis of accurate data bases and analysis of historical data, but unfortunately such data bases are not accessible in most of the zones, especially in developing countries, or else they are newly established and not applicable yet. This issue reveals the necessity of using Expert Systems and Fuzzy Set Theory. By using such systems it will be possible to formulize the specialty and experience of several experts and specialists who have been working in petroliferous areas for several years. On the other hand, in developing countries often the damages to environment and environmental resources are not considered as risk assessment priorities and they are approximately under-estimated. For this reason, the proposed model in this research is specially addressing the environmental risk of oil spills from stationary sources in offshore zones.