Emergy synthesis of intensive eucalyptus cultivation in Sao Paolo, Brazil

We used environmental accounting to evaluate high-intensity clonal eucalyptus production in Sao Paolo, Brazil, converting inputs (environmental, material, and labor) to emergy units so ecological efficiency could be compared on a common basis. Input data were compiled under three pH management scenarios (lime, ash, and sludge). The dominant emergy input is environmental work (transpired water, similar to 58% of total emergy), followed by diesel (similar to 15%); most purchased emergy is invested during harvest (41.8% of 7-year production totals). Where recycled materials are used for pH amendment (ash or sludge instead of lime), we observe marked improvements in ecological efficiency; lime (raw) yielded the highest unit emergy value (UEV = emergy per unit energy in the product = 9.6E + 03 sej J(-1)), whereas using sludge and ash (recycled) reduced the UEV to 8.9E + 03 and 8.8E + 03 sej J(-1), respectively. The emergy yield ratio was similarly affected, suggesting better ecological return on energy invested. Sensitivity of resource use to other operational modifications (e.g., decreased diesel, labor, or agrochemicals) was small (<3% change). Emergy synthesis permits comparison of sustainability among forest production systems globally. This eucalyptus scheme shows the highest ecological efficiency of analyzed pulp production operations (UEV range = 1.1 to 3.6E + 04 sej J(-1)) despite high operational intensity.

Heart rate, blood lactate and kinematic data of elite colts (under-19) rugby union players during competition

Physiological and kinematic data were collected from elite under-19 rugby union players to provide a greater understanding of the physical demands of rugby union. Heart rate, blood lactate and time-motion analysis data were collected from 24 players (mean +/- s((x) over bar): body mass 88.7 +/- 9.9 kg, height 185 +/- 7 cm, age 18.4 +/- 0.5 years) during six competitive premiership fixtures. Six players were chosen at random from each of four groups: props and locks, back row forwards, inside backs, outside backs. Heart rate records were classified based on percent time spent in four zones (>95%, 85-95%, 75-84%, <75% HRmax). Blood lactate concentration was measured periodically throughout each match, with movements being classified as standing, walking, jogging, cruising, sprinting, utility, rucking/mauling and scrummaging. The heart rate data indicated that props and locks (58.4%) and back row forwards (56.2%) spent significantly more time in high exertion (85-95% HRmax) than inside backs (40.5%) and outside backs (33.9%) (P < 0.001). Inside backs (36.5%) and outside backs (38.5%) spent significantly more time in moderate exertion (75-84% HRmax) than props and locks (22.6%) and back row forwards (19.8%) (P < 0.05). Outside backs (20.1%) spent significantly more time in low exertion (< 75% HRmax) than props and locks (5.8%) and back row forwards (5.6%) (P < 0.05). Mean blood lactate concentration did not differ significantly between groups (range: 4.67 mmol.l(-1) for outside backs to 7.22 mmol.l(-1) for back row forwards; P < 0.05). The motion analysis data indicated that outside backs (5750 m) covered a significantly greater total distance than either props and locks or back row forwards (4400 and 4080 m, respectively; P < 0.05). Inside backs and outside backs covered significantly greater distances walking (1740 and 1780 m, respectively; P < 0.001), in utility movements (417 and 475 m, respectively; P < 0.001) and sprinting (208 and 340 m, respectively; P < 0.001) than either props and locks or back row forwards (walking: 1000 and 991 m; utility movements: 106 and 154 m; sprinting: 72 and 94 m, respectively). Outside backs covered a significantly greater distance sprinting than inside backs (208 and 340 m, respectively; P < 0.001). Forwards maintained a higher level of exertion than backs, due to more constant motion and a large involvement in static high-intensity activities. A mean blood lactate concentration of 4.8-7.2 mmol.l(-1) indicated a need for 'lactate tolerance' training to improve hydrogen ion buffering and facilitate removal following high-intensity efforts. Furthermore, the large distances (4.2-5.6 km) covered during, and intermittent nature of, match-play indicated a need for sound aerobic conditioning in all groups (particularly backs) to minimize fatigue and facilitate recovery between high-intensity efforts.

Influence of laser irradiation on fiber post retention

The purpose of this in vitro study was to compare the bond strength between fiber post and laser-treated root canals. Forty single-rooted bovine teeth were endodontically treated and randomly divided into four groups of equal size according to the root canal treatment: group 1 conventional treatment (without laser irradiation); group 2 Nd:YAG laser (1.5 W, 10 Hz, 100 mJ); group 3 Er,Cr:YSGG laser (0.75 W, 20 Hz); and group 4 Nd:YAG + Er,Cr:YSGG lasers. The fiber posts were cemented with an adhesive system + resin cement, in accordance with the manufacturer`s instructions. A mini acrylic pipe was fixed on the coronal section of the post using a light-polymerized resin. Specimens were mounted on an acrylic pipe with a self-polymerized resin. Retention forces were determined using a universal testing machine (0.5 mm/min). Data were analyzed using one-way ANOVA and Tukey tests (p < 0.05). The post retention force in group 2 was found to be lower than that in the other experimental groups. Fractures were observed at the interface between the dentin and the resin in all groups. High-intensity lasers can be used in conventional endodontic treatment; however, root canal surface irradiation using the Nd:YAG laser was shown to negatively affect the post retention force.

Different air-water spray regulations affect the healing of Er,Cr:YSGG laser incisions

Surgeries performed with high-intensity laser devices may be improved with accurate protocols, including the air-water spray regulation. Thus, this study sought to investigate the healing process of wounds made on the dorsum of rat tongues using an Er,Cr:YSGG laser device with different air-water spray regulations. The incisions were made on the dorsum of Wistar rat tongues using an Er,Cr:YSGG laser with three different air-water spray regulations (100/0%, 50/50%, 11/7%). Scalpel incisions functioned as controls. The sacrifices occurred between 0 and 14 days after surgery. Morphological, histological, and immunohistochemical (fibronectin and type III collagen) analysis of the wounds were performed. The air-water spray regulation influenced wound healing and the inflammatory response, especially in the earlier stages. Incisions performed using the 100/0% air/water spray regulation had the worst results, expressing a greater amount of fibronectin and type III collagen. The 50/50% air/water spray regulation brought in a non-clear surgical field and poor laser interaction with the tissue. The 11/7% air/water spray regulation showed the best clinical results and less pronounced histological events. According to the results encountered, the air-water spray should be regulated to improve surgery.

Major colour patterns of reef-building corals are due to a family of GFP-like proteins

Reef-building corals are renowned for their brilliant colours yet the biochemical basis for the pigmentation of corals is unknown. Here, we show that these colours are due to a family of GFP-like proteins that fluoresce under ultraviolet (UV) or visible light. Pigments from ten coral species were almost identical to pocilloporin (Dove et al. 1995) being dimers or trimers with approximately 28-kDa subunits. Degenerative primers made to common N-terminal sequences yielded a complete sequence from reef-building coral cDNA, which had 19.6% amino acid identity with green fluorescent protein (GFP). Molecular modelling revealed a 'beta -can' structure, like GFP, with 11 beta -strands and a completely solvent-inaccessible fluorophore composed of the modified residues Gln-61, Tyr-62 and Gly-63. The molecular properties of pocilloporins indicate a range of functions from the conversion of high-intensity UV radiation into photosynthetically active radiation (PAR) that can be regulated by the dinoflagellate peridinin-chlorophyll-protein (PCP) complex, to the shielding of the Soret and Q(x) bands of chlorophyll a and c from scattered high-intensity light. These properties of pocilloporin support its potential role in protecting the photosynthetic machinery of the symbiotic dinoflagellates of corals under high light conditions and in enhancing the availability of photosynthetic light under shade conditions.

Nocturnal activity in the green sea turtle alters daily profiles of melatonin and corticosterone

In nature, green turtles (Chelonia mydas) can exhibit nocturnal activity in addition to their typically diurnal activity cycle. We examined whether nocturnal activity in captive and free-living green turtles altered daily plasma profiles of melatonin (MEL) and corticosterone (CORT). In captivity, diurnally active green turtles expressed distinct diel cycles in MEL and CORT; a nocturnal rise was observed in MEL and a diurnal rise was observed in CORT. However, when induced to perform both low- and high-intensity nocturnal activity, captive green turtles exhibited a significant decrease in MEL, compared to inactive controls. In contrast, plasma CORT increased significantly with nocturnal activity, and further, the relative increase in CORT was correlated with the intensity of the nocturnal behavior. In free-living green turtles that performed nocturnal activity including: nesting, mate searching, and feeding/swimming behaviors, plasma profiles in MEL and CORT exhibited relatively little, or no, daily fluctuation. Our findings demonstrate that nocturnal activity in green turtles is often associated with MEL and CORT profiles that resemble those measured during the day. We speculate that these conspicuous changes in MEL and CORT during nocturnal activity could either support or promote behaviors that enable acquisition of transient resources important to the survival and reproductive success of green turtles. (C) 2002 Elsevier Science (USA).

Alternative technologies for producing sterile low acid food products

Four emerging high-energy non-thermal technologies may replace or augment heating for producing sterile low-acid food products. High pressure, high-voltage pulsed electric field, high-energy ultrasound and high-intensity pulsed light are all capable of reducing bacterial spore counts under certain conditions. However, only non-continuous high pressure treatments, at temperatures higher than ambient, are currently capable of completely inactivating spores and producing sterile food products. The first three technologies also reduce the resistance of spores to inactivation by heat.

Discrete element modelling of the influence of lifters on power draw of tumbling mills

Crushing and grinding are the most energy intensive part of the mineral recovery process. A major part of rock size reduction occurs in tumbling mills. Empirical models for the power draw of tumbling mills do not consider the effect of lifters. Discrete element modelling was used to investigate the effect of lifter condition on the power draw of tumbling mill. Results obtained with PFC3D code show that lifter condition will have a significant influence on the power draw and on the mode of energy consumption in the mill. Relatively high lifters will consume less power than low lifters, under otherwise identical conditions. The fraction of the power that will be consumed as friction will increase as the height of the lifters decreases. This will result in less power being used for high intensity comminution caused by the impacts. The fraction of the power that will be used to overcome frictional resistance is determined by the material's coefficient of friction. Based on the modelled results, it appears that the effective coefficient of friction for in situ mill is close to 0.1. (C) 2003 Elsevier Science Ltd. All rights reserved.

In vivo and in vitro models demonstrate a role for caveolin-1 in the pathogenesis of ischaemic acute renal failure

Caveolae and their proteins, the caveolins, transport macromolecules; compartmentalize signalling molecules; and are involved in various repair processes. There is little information regarding their role in the pathogenesis of significant renal syndromes such as acute renal failure (ARF). In this study, an in vivo rat model of 30 min bilateral renal ischaemia followed by reperfusion times from 4 h to 1 week was used to map the temporal and spatial association between caveolin-1 and tubular epithelial damage (desquamation, apoptosis, necrosis). An in vitro model of ischaemic ARF was also studied, where cultured renal tubular epithelial cells or arterial endothelial cells were subjected to injury initiators modelled on ischaemia-reperfusion (hypoxia, serum deprivation, free radical damage or hypoxia-hyperoxia). Expression of caveolin proteins was investigated using immunohistochemistry, immunoelectron microscopy, and immunoblots of whole cell, membrane or cytosol protein extracts. In vivo, healthy kidney had abundant caveolin-1 in vascular endothelial cells and also some expression in membrane surfaces of distal tubular epithelium. In the kidneys of ARF animals, punctate cytoplasmic localization of caveolin-1 was identified, with high intensity expression in injured proximal tubules that were losing basement membrane adhesion or were apoptotic, 24 h to 4 days after ischaemia-reperfusion. Western immunoblots indicated a marked increase in caveolin-1 expression in the cortex where some proximal tubular injury was located. In vitro, the main treatment-induced change in both cell types was translocation of caveolin-1 from the original plasma membrane site into membrane-associated sites in the cytoplasm. Overall, expression levels did not alter for whole cell extracts and the protein remained membrane-bound, as indicated by cell fractionation analyses. Caveolin-1 was also found to localize intensely within apoptotic cells. The results are indicative of a role for caveolin-1 in ARF-induced renal injury. Whether it functions for cell repair or death remains to be elucidated. Copyright (C) 2003 John Wiley Sons, Ltd.

As formas de participação na construção do projecto político pedagógico : diferentes realidades escolares

RESUMO: Na sociedade da comunicação e da informação, as escolas ainda não conseguiram compreender o seu papel de facilitadoras do conhecimento que o mundo está promovendo entre a realidade da escola e o interesse do educando. Um dos fatores para isso é o crescimento das escolas ao longo dos séculos e a necessidade de superação decorrente do alargamento da educação, que têm gerado um conhecimento complexo que descreve as reflexões e conscientizações sobre o nosso próprio desenvolvimento humano e sobre a nossa participação no mundo em que estamos vivendo. Essas complexidades possibilitam mudanças, principalmente nas questões epistemológicas e paradigmáticas, que proporcionaram outra forma de conceber o conhecimento e os saberes, chamado de “ecologia dos saberes”. Nesse contexto, existe a necessidade de se fazer uma leitura crítica na e da escola e de sua participação junto à comunidade escolar, objetivando minimizar as relações de dominação, de normatizações, de disciplinamento, de concentração de poder, para direcionar a educação num processo emancipatório, democrático, consciente das mudanças, de forma a incluir todos os saberes possíveis para acompanhar e valorizar a realidade escolar, através da participação de alta intensidade na construção e reconstrução do seu projeto político pedagógico. Para tanto, iremos discorrer sobre três escolas, a partir da análise de cada uma dentro da realidade construída por elas, buscando demonstrar que as escolas, dentro dos seus contextos educacionais, possuem diferentes realidades que não podem ser generalizadas, mas que devem ser compreendidas no sentido de que sejam promovidas a autonomia escolar e o fortalecimento da democracia educacional, objetivando a superação das condições atuais da educação para se adequar à sociedade e ao mundo atual. ABSTRACT: In the present society of communication and information, schools have not yet been able to understand their roles as facilitators of the knowledge that the world is promoting between the reality of school and the interest of the learner. One of the reasons for that is the growth of schools along the centuries as well as their constant need for getting over old problems, due to the expansion of education. These questions lead to a complex knowledge which describes reflections on our own human development and on our participation in the world we live in. These complexities lead to changes, especially in epistemological and paradigmatic questions, making it possible for new ways of conceiving knowledge, known as “ecology of knowledge”. In this context, there is a need for making a critical reading about school and its participation in the school community, with the objective to minimize the relations of domination, power concentration and discipline and to direct education towards a process of emancipation and democracy, in which there is conscience of the necessary changes to include all possible knowledge as a way to value the reality of school through a high intensity participation in the construction and reconstruction of its political and pedagogical project. Thus, this study will discuss three schools, basing this discussion on the analysis of each school within the reality built by them, trying to demonstrate that, within their educational contexts, each one possesses different realities that cannot be generalized. These differences must, however, be understood, in order to allow the promotion of school autonomy and the strengthening of educational democracy with the objective to get over education`s present conditions and adjust them to society and to the present world.

A influência da microgravidade na musculatura esquelética: alterações musculares e intervenção terapêutica

Introdução – O incremento do tempo de exposição à microgravidade origina um descondicionamento músculo-esquelético que precisa de ser prevenido através do treino. Objetivos – Identificar os padrões destas alterações e descrever os programas de treino em microgravidade e estratégias pós-exposição. Método – A pesquisa da revisão da literatura foi conduzida através da MEDLINE/PubMed e PEDro com as seguintes palavras--chave: “spaceflight rehabilitation”, “spaceflight muscle”, “microgravity muscle” e “bed rest muscle”, seguida de uma seleção dos artigos. Resultados – Os estudos encontrados apresentam uma resposta músculo-tendinosa diferencial sendo que o treino protege total ou parcialmente estas estruturas. Conclusão – O treino de resistance de intensidade elevada e baixas repetições associado a exercícios específicos é o mais adequado para responder ao descondicionamento. - ABSTRACT - Introduction – The increased microgravity exposition time raised the need for training programs to avoid muscle and tendinous deconditioning. Objectives – To identify the deconditioning patterns and to identify and describe the training programs used for its prevention during and after microgravity exposure. Methods – This literature review is based on a search conducted via MEDLINE/PubMed and PEDro using the following search words: “spaceflight rehabilitation”, “spaceflight muscle”, “microgravity muscle” and “bed rest muscle”. The search was followed by an article selection. Results – The studies reveal a differential exposure phenomenon for which the training programs reviewed are partly effective. Conclusion – According to the literature the high intensity low volume resistance programs with specific exercises are more appropriate to address the deconditioning problem.

Verificação dos estados limites de utilização de estruturas de betão

A ocorrência de fenómenos como deformações excessivas, deformações impostas, variações de temperatura, fluência e retracção entre outros são responsáveis pela diminuição do desempenho em serviço das estruturas de betão. Frequentemente, os projectistas valorizam em demasia a verificação da segurança em relação aos estados limites últimos, dedicando menos atenção à verificação dos estados limites de utilização, recorrendo a certas medidas construtivas que em casos usuais poderão ser suficientes. Em casos especiais como vãos consideráveis ou acções de elevada intensidade, estas medidas não garantem que a estrutura apresente a funcionalidade e a durabilidade desejáveis, impondo-se a necessidade de verificar os estados limites de utilização por métodos de cálculo mais fiáveis. Este factor, pode ser determinante para evitar certas anomalias de difícil resolução. A presente dissertação pretende documentar alguns métodos de cálculo utilizados no controlo da fendilhação, na limitação das tensões e no controlo das deformações segundo as mais recentes disposições regulamentares previstas para o efeito. Como os valores obtidos com a aplicação destes métodos são aproximações ao comportamento real dos elementos estruturais, procurou-se comparar estes resultados teóricos com situações reais, de forma a avaliar a sua precisão e fiabilidade. A degradação precoce das estruturas de betão, nem sempre se deve apenas à desvalorização da verificação dos estados limites de utilização em fase de projecto. Como os processos de produção destas estruturas são complexos e por vezes são negligenciadas boas práticas de construção, são propostas neste trabalho resumidamente algumas medidas construtivas que visam aumentar a durabilidade das estruturas e o seu desempenho em serviço.

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.

Forest soil short term response to prescribed fire: an approach by Principal Components Analysis

In the current context of serious climate changes, where the increase of the frequency of some extreme events occurrence can enhance the rate of periods prone to high intensity forest fires, the National Forest Authority often implements, in several Portuguese forest areas, a regular set of measures in order to control the amount of fuel mass availability (PNDFCI, 2008). In the present work we’ll present a preliminary analysis concerning the assessment of the consequences given by the implementation of prescribed fire measures to control the amount of fuel mass in soil recovery, in particular in terms of its water retention capacity, its organic matter content, pH and content of iron. This work is included in a larger study (Meira-Castro, 2009(a); Meira-Castro, 2009(b)). According to the established praxis on the data collection, embodied in multidimensional matrices of n columns (variables in analysis) by p lines (sampled areas at different depths), and also considering the quantitative data nature present in this study, we’ve chosen a methodological approach that considers the multivariate statistical analysis, in particular, the Principal Component Analysis (PCA ) (Góis, 2004). The experiments were carried out in a soil cover over a natural site of Andaluzitic schist, in Gramelas, Caminha, NW Portugal, who was able to maintain itself intact from prescribed burnings from four years and was submit to prescribed fire in March 2008. The soils samples were collected from five different plots at six different time periods. The methodological option that was adopted have allowed us to identify the most relevant relational structures inside the n variables, the p samples and in two sets at the same time (Garcia-Pereira, 1990). Consequently, and in addition to the traditional outputs produced from the PCA, we have analyzed the influence of both sampling depths and geomorphological environments in the behavior of all variables involved.

A onda de calor de Agosto de 2003 e os seus efeitos sobre a mortalidade da população portuguesa

RESUMO - Portugal continental, como outros países europeus, foi afectado por uma onda de calor de grande intensidade no Verão de 2003, com efeitos na mortalidade da população. O excesso de óbitos associados à onda de calor foi estimado pela comparação do número de óbitos observados entre 30 de Julho e 15 de Agosto de 2003 e o número de óbitos esperados se a população tivesse estado exposta às taxas de mortalidade médias do biénio 2000-2001 no respectivo período homólogo. Os óbitos esperados foram calculados com ajustamento para a idade. O número de óbitos observados (O) foi superior ao número esperado (E) em todos os dias do período estudado e o seu excesso global foi estimado em 1953 óbitos (excesso relativo de 43%), dos quais 1317 (61%) ocorreram no sexo feminino e 1742 no grupo de 75 e + anos (89%). A nível distrital, Portalegre teve o maior aumento relativo do número de óbitos (+89%) e Aveiro o menor (+18%). Numa área geográfica contínua do interior do território (Guarda, Castelo Branco, Portalegre e Évora) houve aumentos relativos superiores a 80%. Em termos absolutos, o maior excesso de óbitos ocorreu no distrito de Lisboa (mais cerca de 396) e no do Porto (mais cerca de 183). As causas de morte «golpe de calor» e «desidratação e outros distúrbios metabólicos» tiveram os aumentos relativos mais elevados (razões O/E de, respectivamente, 70 e 8,65). Os maiores aumentos absolutos do número de óbitos ocorreram no grupo das «doenças do aparelho circulatório» (mais 758), nas «doenças do aparelho respiratório» (mais 255) e no conjunto de «todas as neoplasias malignas» (mais 131). No período da onda de calor e no período de comparação, a percentagem dos óbitos que ocorreu nos hospitais (52% e 56%), no domicílio (32 e 33%) e em «outros locais» foi semelhante. A discussão sobre os factores que condicionaram a obtenção dos valores apresentados, relativos ao excesso de óbitos por sexo, grupo etário, distrito, causa e local da morte, permite concluir que os mesmos se afiguram adequados para medir a ordem de grandeza e caracterizar o efeito da onda de calor na mortalidade. O erro aleatório, medido pelos intervalos de confiança, e alguns possíveis erros sistemáticos associados ao período de comparação escolhido não deverão afectar de modo relevante as estimativas.