936 resultados para High frame rate display
Resumo:
Pathogens causing tuberculosis and other chronic infectious diseases of major public health importance commonly have complex mechanisms involved in their persistence in the host despite specific and sometimes strong immune responses. These diseases are also associated with the lack of efficient vaccines, difficult therapeutics and a high mortality rate among susceptible individuals. Here, we will review features of the host immune response that contribute to the occurrence of disease. In addition, we propose that the immune responses observed in tuberculosis cannot be interpreted solely on the basis of a Th1-Th2 counter-regulatory paradigm since there is growing evidence that natural regulatory T cells may play an important role in the regulation of host immune responses against Mycobacterium tuberculosis. Thus, the development of more effective vaccines against this bacterial disease should take into account the role of natural regulatory T cells in the progression to severe disease and persistence of infection. Finally, new treatments based on manipulation of regulatory T cells should be investigated.
Resumo:
The high abortion rate of 45,X embryos indicates that patients with Turner syndrome and 45,X karyotype could be mosaics, in at least one phase of embryo development or cellular lineage, due to the need for the other sex chromosome presence for conceptus to be compatible with life. In cases of structural chromosomal aberrations or hidden mosaicism, conventional cytogenetic techniques can be ineffective and molecular investigation is indicated. Two hundred and fifty patients with Turner syndrome stigmata were studied and 36 who had female genitalia and had been cytogenetically diagnosed as having "pure" 45,X karyotype were selected after 100 metaphases were analyzed in order to exclude mosaicism and the presence of genomic Y-specific sequences (SRY, TSPY, and DAZ) was excluded by PCR. Genomic DNA was extracted from peripheral blood and screened by the human androgen receptor (HUMARA) assay. The HUMARA gene has a polymorphic CAG repeat and, in the presence of a second chromosome with a different HUMARA allele, a second band will be amplified by PCR. Additionally, the CAG repeats contain two methylation-sensitive HpaII enzyme restriction sites, which can be used to verify skewed inactivation. Twenty-five percent (9/36) of the cases showed a cryptic mosaicism involving a second X and approximately 14% (5/36), or 55% (5/9) of the patients with cryptic mosaicism, also presented skewed inactivation. The laboratory identification of the second X chromosome and its inactivation pattern are important for the clinical management (hormone replacement therapy, and inclusion in an oocyte donation program) and prognostic counseling of patients with Turner syndrome.
Resumo:
Insertional mutagenesis is an important tool for functional genomics in Drosophila melanogaster. The insertion site in the KG00562 mutant fly line has been mapped to the CG8709 (herein named DmLpin) locus and to the 3’ of kermit (also called dGIPC). This mutant line presents a high lethality rate resulting from a gain of function. To obtain some insight into the biological role of the mutated locus, we have characterized the mutation and its relation to the high mortality of the KG00562 fly line. In this mutant, we did not detect one of the DmLpin transcripts, namely DmLpinK, but we did detect an unusual 2.3-kb mRNA (LpinK-w). Further investigation revealed that the LpinK-w transcript results from an aberrant splicing between the untranslated first exon of DmLpinK and the mini-white marker gene. Lack of DmLpinK or LpinK-w expression does not contribute to lethality, since heterozygous KG00562/Def7860 animals presented lethality rates comparable to those of the wild type. In contrast, the overexpression of kermit was associated with lethality of the KG00562 fly line. Significantly higher levels of kermit were detected in the Malpighian tubules of KG00562/+ flies that presented higher lethality rates than wild-type or KG00562/Def7860 animals, in which the lethality was rescued. In agreement with a recently reported study, our data support the hypothesis that misexpression of kermit/dGIPC could interfere with Drosophila development, with further investigations being needed in this direction.
Resumo:
Pancreatic adenocarcinoma is important in oncology because of its high mortality rate. Deaths may be avoided if an early diagnosis could be achieved. Several types of tumors overexpress gastrin-releasing peptide receptors (GRPr), including pancreatic cancer cells. Thus, a radiolabeled peptide derivative of gastrin-releasing peptide (GRP) may be useful as a specific imaging probe. The purpose of the present study was to evaluate the feasibility of using99mTc-HYNIC-βAla-Bombesin(7-14)as an imaging probe for Capan-1 pancreatic adenocarcinoma. Xenographic pancreatic tumor was developed in nude mice and characterized by histopathological analysis. Biodistribution studies and scintigraphic images were carried out in tumor-bearing nude mice. The two methods showed higher uptake by pancreatic tumor when compared to muscle (used as control), and the tumor-to-muscle ratio indicated that99mTc-HYNIC-βAla-Bombesin(7-14)uptake was four-fold higher in tumor cells than in other tissues. Scintigraphic images also showed a clear signal at the tumor site. The present data indicate that99mTc-HYNIC-βAla-Bombesin(7-14)may be useful for the detection of pancreatic adenocarcinoma.
Resumo:
Fluid flow behaviour in porous media is a conundrum. Therefore, this research is focused on filtration-volumetric characterisation of fractured-carbonate sediments, coupled with their proper simulation. For this reason, at laboratory rock properties such as pore volume, permeability and porosity are measured, later phase permeabilities and oil recovery in function of flow rate are assessed. Furthermore, the rheological properties of three oils are measured and analysed. Finally based on rock and fluid properties, a model using COMSOL Multiphysics is built in order to compare the experimental and simulated results. The rock analyses show linear relation between flow rate and differential pressure, from which phase permeabilities and pressure gradient are determined, eventually the oil recovery under low and high flow rate is established. In addition, the oils reveal thixotropic properties as well as non-Newtonian behaviour described by Bingham model, consequently Carreau viscosity model for the used oil is given. Given these points, the model for oil and water is built in COMSOL Multiphysics, whereupon successfully the reciprocity between experimental and simulated results is analysed and compared. Finally, a two-phase displacement model is elaborated.
Resumo:
The physical and chemical alterations in palm oil during continuous industrial par frying of breaded chicken snacks were evaluated using a pseudo first-order kinetic model. The acidity index, refractive index, concentration of polar compounds, viscosity, color, and absorbance (232 and 268 nm) of 238 samples of the frying oil collected during 26 days of production were analyzed. For all of the analyses, the results of the oil were below the limits recommended for oil disposal, indicating that the processing conditions were safe and that under these experimental conditions the oil remained suitable for frying. The linear regressions were significant for refractive index, content of polar compounds, and lightness (L*). The content of polar compounds was determined using a cooking oil tester, and it had the best fit to the proposed model and can be used as an effective index for monitoring palm oil during the continuous par frying of breaded chicken snacks. The high turnover rate of the oil was important for maintaining the oil in good running conditions.
Resumo:
The objective of this study is to evaluate the chemical composition, morphology, and the thermogravimetric behavior of the pulp of Terminalia catappa, also known as tropical almond. The analytical results show, based mainly on its lipid content, that this fruit has a considerable energy value. Its fiber content contributes to enhance the functional properties of the fruit. Morphological characteristics show a spongy-like structure with dispersion of starch granules and high concentration of fiber bundles, confirming the results of the chemical composition analysis. The thermogravimetric behavior exhibited by this fruit pulp when submitted to progressive temperature increase under dynamic air atmosphere shows that this raw material has great potential for industrial use due to its high absorption rate of water soluble and/or lipid-based compounds, allowing its use as a dietary complement or supplement ingredient in food products.
Resumo:
Introduction: Sepsis is a leading precipitant of Acute Kidney Injury (AKI) in intensive care unit (ICU) patients, and is associated with a high mortality rate. Objective: We aimed to evaluate the risk factors for dialysis and mortality in a cohort of AKI patients of predominantly septic etiology. Methods: Adult patients from an ICU for whom nephrology consultation was requested were included. End-stage chronic renal failure and kidney transplant patients were excluded. Results: 114 patients were followed. Most had sepsis (84%), AKIN stage 3 (69%) and oliguria (62%) at first consultation. Dialysis was performed in 66% and overall mortality was 70%. Median serum creatinine in survivors and non-survivors was 3.95 mg/dl (2.63 - 5.28) and 2.75 mg/dl (1.81 - 3.69), respectively. In the multivariable models, oliguria and serum urea were positively associated with dialysis; otherwise, a lower serum creatinine at first consultation was independently associated with higher mortality. Conclusion: In a cohort of septic AKI, oliguria and serum urea were the main indications for dialysis. We also described an inverse association between serum creatinine and mortality. Potential explanations for this finding include: delay in diagnosis, fluid overload with hemodilution of serum creatinine or poor nutritional status. This finding may also help to explain the low discriminative power of general severity scores - that assign higher risks to higher creatinine levels - in septic AKI patients.
Resumo:
The accelerating adoption of electrical technologies in vehicles over the recent years has led to an increase in the research on electrochemical energy storage systems, which are among the key elements in these technologies. The application of electrochemical energy storage systems for instance in hybrid electrical vehicles (HEVs) or hybrid mobile working machines allows tolerating high power peaks, leading to an opportunity to downsize the internal combustion engine and reduce fuel consumption, and therefore, CO2 and other emissions. Further, the application of electrochemical energy storage systems provides an option of kinetic and potential energy recuperation. Presently, the lithium-ion (Li-ion) battery is considered the most suitable electrochemical energy storage type in HEVs and hybrid mobile working machines. However, the intensive operating cycle produces high heat losses in the Li-ion battery, which increase its operating temperature. The Li-ion battery operation at high temperatures accelerates the ageing of the battery, and in the worst case, may lead to a thermal runaway and fire. Therefore, an appropriate Li-ion battery cooling system should be provided for the temperature control in applications such as HEVs and mobile working machines. In this doctoral dissertation, methods are presented to set up a thermal model of a single Li-ion cell and a more complex battery module, which can be used if full information about the battery chemistry is not available. In addition, a non-destructive method is developed for the cell thermal characterization, which allows to measure the thermal parameters at different states of charge and in different points of cell surface. The proposed models and the cell thermal characterization method have been verified by experimental measurements. The minimization of high thermal non-uniformity, which was detected in the pouch cell during its operation with a high C-rate current, was analysed by applying a simplified pouch cell 3D thermal model. In the analysis, heat pipes were incorporated into the pouch cell cooling system, and an optimization algorithm was generated for the estimation of the optimalplacement of heat pipes in the pouch cell cooling system. An analysis of the application of heat pipes to the pouch cell cooling system shows that heat pipes significantly decrease the temperature non-uniformity on the cell surface, and therefore, heat pipes were recommended for the enhancement of the pouch cell cooling system.
Resumo:
This article suggests some explanations for the steady rise of the commodities prices since 2002. Firstly, it analyses the long and medium term trends of these prices. Secondly, it explores the determinants of the recent rise, which are the macroeconomic conditions of the international economic, the high growth rate of China, and supply shocks that affect the production of some agriculture commodities.
Resumo:
After surpassed more than half a decade since the adoption of inflation targeting in Brazil, it can be seen that maintaining a high interest rate is inherent to the strategy for the conduction of the monetary policy. The objective of this paper is to show that the present policy for defining the basic interest rate of the economy, based on the response to inflation considering both market and administered prices, is onerous for the Brazilian society. Based on findings from empirical evidence in the period 1999-2004, the adoption of a core inflation, a change in the time horizon for definition of targets, and, in common agreement between Banco Central do Brasil and National Treasury, a definition of these inflation targets, as a framework to increase efficiency of the monetary regime, creates possibilities for proposing a reduction on the Selic rate.
Resumo:
Enterprise resource planning (ERP) software is used to combine all the functions happening inside the organization with the help of one software. All the data is centralized which makes it easy to manage information for all participants. The literature on ERP is studied thoroughly the whole process of adoption till the implementation and final evaluations. But studies that focus on small and medium sized enterprises are limited in number when compared to the large scale enterprises. In case of Pakistan, research is very limited. In this thesis, the author tries to analyze the current status of SMEs usage of ERP system. The benefits obtained and challenges faced by SMEs of Pakistan are studied. Framework presented by Shang and Seddon (2000) is used to understand the benefits obtained by the SMEs in Pakistan. This is a comprehensive framework that classifies the benefits obtained by the ERP adoption, into five categories: operational benefits, managerial benefits, Strategic benefits, IT benefits, and Organizational benefits. The results show that SMEs of Pakistan are also getting many benefits after adoption of ERP. Most of the firms had implemented SAP software. Operational benefits were mentioned by all the firms. The most important benefits were report generation, quick access to critical information, better product and cost planning. Respondents also mentioned that they had reduced corruption as a result of ERP implementation. It is also an important benefit considering high corruption rate in Pakistan. Along with benefits, challenges faced by Pakistani SMEs included infrastructure problems like electricity, difficulties with integration of one module with other module, costs of adoption and lack of skilled ERP consultants. Further studies in this regard can be conducted on cloud based ERP which is fast growing all around the world.
Resumo:
Both educators and politicians appear to be quite concerned about a dropout rate in Ontario's public schools of some 30 percent. With the basic understanding that a high dropout rate is costly both in economic terms and in human terms, something quite obviously needs to be done to reduce the dropout rate in Ontario schools and, in doing so, ensuring Ontario and its graduates an active role in a growing global economy. This study is an exploratory pilot study in that it examined mentoring and the role that mentoring can play in assisting a student in staying in school and graduating from secondary school. Also incorporated in this is co-operative education and the role it can play, through mentoring, in making students aware of lifestyle level of employment, and of the skills necessary to obtain gainful, meaningful employment. In order to gain information on student attitudes, needs and expectations of a mentoring situation, a series of three questionnaires was used. Also, a questionnaire was distributed to the various co-operative education employers. The intent of this questionnaire was to probe the attitudes, needs and expectations of a mentoring situation from the perspective of an employer. The findings of this study indicated that co-operative education and mentoring are a very valuable and useful component in education. There exist certain factors in a co-operative education setting that serve to enhance and to augment the traditional or "theoretical" setting of the classroom. In addition, a mentoring situation tends to add a sense of relevance to education that students seem to require. Also, an opportunity is offered that allows a student to practice and further refine the skills that have been taught over the course of the student's academic life. Results from this study suggested that a mentoring situation, occurring through a co-operative education situation, adds relevance and a sense of "application" to the traditional or classroom schooling situation. The whole idea of mentoring bodes well for the future of education and of the student. Many advantages are identified in a mentoring situation. One of the advantages is that the schools are able to work quite closely with the community and business in order to stay current and informed on the needs and expected needs of the business community. Co-operative education has now gone beyond being an "experimental" mode of education. All students can benefit from being involved in the program. Certainly at-risk students are aided with staying in school. Those students who are said to be not at-risk can also benefit from being enrolled in the program by gaining hands-on work experience and some of the necessary skills to ensure a place in a growing world economy.
Resumo:
Au Québec, face à la prévalence élevée des problèmes de santé mentale et à la pénurie de médecins psychiatres, le médecin omnipraticien (MO) occupe une place primordiale dans la prise en charge et le suivi des soins de santé mentale. Dans le contexte de réforme du système de santé mentale axée sur un renforcement de la collaboration entre les MO, les psychiatres et les équipes de santé mentale, notre étude vise à mieux comprendre la pratique clinique et la pratique collaborative développée par les MO, leur appréciation des outils de travail et de la qualité des services de santé mentale, dans le but d’améliorer la complémentarité des soins au niveau primaire. Cette étude transversale impliquait 1415 MO de neuf territoires de centre de santé et de services sociaux (CSSS) du Québec. L’échantillon final était constitué de 398 MO représentatifs de lieux de pratique diversifiés et le taux de réponse était de 41%. Nos résultats mettent en évidence que la pratique clinique et la pratique collaborative des MO diffère selon le degré de gravité des problèmes de santé mentale des patients rencontrés, c’est à dire, trouble transitoire/modéré de santé mentale (TTM.SM) ou trouble grave de santé mentale (TG.SM), et que les MO sont favorables au fait de travailler en collaboration avec les autres professionnels de la santé mentale. Ainsi, il apparaît important de renforcer l’accessibilité des MO aux professionnels de la santé mentale, particulièrement les psychiatres, et de les informer de l’existence des autres acteurs en santé mentale sur leur territoire, pour renforcer la collaboration et la qualité des soins primaires de santé mentale.
Resumo:
The Brazilian Amazon is one of the world’s largest tropical forests. It supplies more than 80 % of Brazil’s timber production and makes this nation the second largest producer of tropical wood. The forestry sector is of major importance in terms of economic production and employment creation. However, the Brazilian Amazon is also known for its high deforestation rate and for its rather unsustainably managed timber resources, a fact which puts in the balance the long-term future of the forestry sector in the region. Since the mid- 1990s, with strong support from World Wildlife Fund (WWF), the number of tropical forests certified by the Forest Stewardship Council (FSC) has significantly increased. This is especially true for projects sponsored by large scale companies. The number of community- based forest management projects has also increased. Certification of community-based forest enterprises (CFEs) was initially a goal for the sponsors and community members. Certification is viewed as a way to reach alternative timber markets. In Brazil, the state of Acre has the highest concentration of CFEs certified by FSC. Most of them have been implemented with the support of environmental NGOs and public funds. Environmental NGOs strongly defend the advantages of certification for communities; however, in reality, this option is not that advantageous. Despite all the efforts, the number of participants in each project remains low. Why is this occurring? In this paper, we analyze the underlying motives of a few individual’s participation in CFEs certification projects. We aim to present and discuss some factors that shape the success of CFEs and their later certification. The results are based on surveys conducted in two certified CFEs in the state of Acre.