937 resultados para Grazing cycles
Resumo:
O objetivo deste trabalho foi o de estimar o consumo total e o diário de matéria seca do pasto, de vacas mestiças Holandês - Zebu, em piquetes de capim-elefante (Pennisetum purpureum Schum.). Três grupos de 24 vacas foram usados em piquetes (4,5 vacas/ha), pastejados por três dias e submetidos a diferentes períodos de descanso durante dois anos. Os tratamentos consistiram de descansos de 30 dias sem concentrado e 30, 37,5 e 45 dias com a suplementação de 2 kg de concentrado (20,6% de proteína bruta). de julho a outubro, as vacas receberam, como suplementação, cana-de-açúcar mais 1% de uréia. O consumo total de matéria seca foi estimado a partir da digestibilidade in vitro da matéria seca da extrusa e da produção fecal obtida com óxido crômico. Independentemente do tratamento, o consumo total foi 2,7; 2,9 e 2.9±0,03%, e o consumo de matéria seca do pasto foi de 1,9; 2,1 e 2,1±0,03% do peso vivo (p<0,05), respectivamente, no primeiro, segundo e terceiro dia de ocupação do piquete. Somente no verão, o consumo do pasto foi semelhante nos três dias de pastejo. A mistura cana-de-açúcar e uréia substituiu o pasto, principalmente no primeiro dia de pastejo, ocasião em que o consumo do pasto era mais baixo.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The ingestive behavior and performance of female lambs grazing on Marandu pasture submitted to different stocking rates during the rainy and transition season were evaluated. The experimental area with 4,500 m² was divided into 45 paddocks of 100 m². Twenty-seven Santa Ines female lambs (purebred) with 4 months age and 22 kg of initial body weight were distributed in a completely randomized design, with nine replicates. Lambs were divided into 9 groups with the same initial weight and submitted to three stocking rates: 2, 3 and 4 lambs/paddock, which corresponded to 40, 60 and 80 lambs/ha, respectively. Each group of animals had a module of five paddocks, managed on intermittent grazing system, with 7 days of occupation and 28 d of rest. Increase on time grazing and reduction on time ruminating and resting were observed as stocking rates increased. There was 14% raise in time grazing and 41% decline on time resting by lambs subjected to the highest stocking rate compared with those in the lower stocking rate. The number of animals/ha promoted linear effect on average daily gain, which was higher for animals in the lowest stocking rate of 90 g/d. For gain per area, the best result was obtained with 60 animals/ha featuring an average value of 426 kg/ha.
Resumo:
The objective of this study was to determine requirements of calcium (Ca), phosphorus (P), magnesium (Mg), potassium (K) and sodium (Na) for grazing zebu bovines. The experiment area was composed of Brachiaria decumbens paddocks. Twenty-seven non-castrated animals, with initial live weight of 311.0 kg and at an average age of 14 months were used. Three animals were slaughtered, after adaptation period, so they were used as control for estimates of empty body weight and initial body composition of animals in the experiment. Out of the 24 remaining animals, four were sent to the maintenance group with restrict grazing time to limit energy intake close to the maintenance level. The other 20 animals were distributed in four treatments: mineral mixture, self-control intake and three-times-a-week-offer frequency (offered on Mondays, Wednesdays and Fridays) and daily. Concentrations of all studied macro elements in empty body and empty body gain decreased as live weight increased. The ratios obtained for g Ca/100 g of retained protein and g P/100 g of retained protein were 9.18 and 4.72, respectively. Total dietary requirement of calcium was lower than the one recommended by NRC (2000), but P requirement was very close to that.
Resumo:
The objectives of this study were to evaluate morphogenetic characteristics and tillering dynamics in Tanzania grass fertilized and non-fertilized with nitrogen, under intermittent grazing, in the spring and the summer. The main plots were composed of four nitrogen rates (0, 100, 200 and 300 kg/ha) and the subplots were growth seasons: spring (October, November and December) and summer (January, February and March). The experimental design was of randomized block with plots subdivided by time (seasons of the year) and four replications. Urea was used as nitrogen supply and was divided into two applications: one in the spring and another in the summer. The experimental units fertilized with N rates of 200 and 300 kg/ha showed six cycles of pasture, with an average of 27 days of pasture interval, while the treatments with no fertilization and 100 kg/ha of N showed only four and five cycles of pasture, respectively. Leaf elongation rate (LER) and the leaf appearance rate (LAR) increased linearly with increasing of N rates. The greatest population density occurred in summer with the higher nitrogen rates. The treatment without N fertilization showed the lowest growth of tiller population, while the other treatments exhibited growth rates above 50% when compared with non-fertilized samples. Nitrogen rates significantly affect the leaf appearance rate and the leaf elongation rate, as well as the number of live leaves in plants of Tanzania grass in both spring and summer.
Resumo:
This study was carried out to analyze the tillering profile of Guinea grass (Panicum maximum cv. Tanzania) pastures subjected to two grazing frequencies (time necessary to intercept 90 and 95% of the incoming light) and two post-grazing heights (30 and 50 cm) in the period from November 2005 to October 2006. The experimental design was of completely randomized blocks with three replications, in a 2 × 2 factorial arrangement. At the end of the spring, pastures managed with 90% light interception showed greater tiller appearance rates in relation to pastures managed with 95%, regardless of post-grazing height. In the summer and fall, pastures managed with post-grazing height of 30 cm showed higher tiller appearance rates in comparison with pastures managed at 50 cm, regardless of grazing frequency. Concerning the tiller mortality rates, in the summer, higher values were found for pastures managed at 90/50 and 95/30 (interception/height), intermediate values at 90/30 and lower values in those managed at 95/50. Pastures managed at 90/30, 95/30 and 95/50 in the fall presented greater tiller mortality rates than those managed at 90/50. These differences do not occur in the winter/beginning of spring. The stability index remained above 1 all through the experimental period. All management strategies evaluated are adequate for Guinea grass.
Resumo:
Effects of sire breed-grazing system and environmental factors on the first activities of high grade Nellore and crossbred Canchim x Nellore, Angus x Nellore, and Simmental x Nellore calves raised in intensive production systems and high grade Nellore calves raised in an extensive production system, after birth, were studied. During 2 years, 185 calves were observed from birth until the end of first suckling, and the following variables were estimated: duration of maternal attention (cow to calf) during the first 15 min after calving, latency to first attempt to stand up, latency to stand up, latency to first suckling, duration of first suckling and the interval from standing to suckling. Data were analyzed by least squares methods, with models that included fixed effects of year and time of the year of birth (March-April (early autumn) and May-June (late autumn)), sire breed-grazing system (Sy), sex of calf (Se), category of cow (primiparous and pluriparous), time of birth, Sy x Se, year x Sy and year x time of the year interactions and the covariates weight of calf, rainfall, air temperature and relative humidity in the day of birth. Calves born from 6:00 to 8:00 h presented the longest latencies to first stand up (40.3 +/- 5.1 min) and the shortest occur from 14:00 to 16:00 h (15.8 +/- 2.7 min) (P < 0.01). Primiparous cows provided longer attention toward the calf in the first 15 min after birth than pluriparous cows (13.0 +/- 0.7 min versus 11.1 +/- 0.5 min; P < 0.05). This attention was also shorter in earlier autumn (11.0 +/- 0.5 min) and longer in late autumn (13.1 +/- 0.8 min) (P < 0.05). Relative to sire breed-grazing system, Nellore calves raised intensively did take longer to stand and to suckle after birth as compared to crossbred calves also raised intensively (P < 0.01). However, grazing system did not affect (P > 0.05) any behaviour variable studied. As regard to sex differences, female calves did take less (P < 0.01) time to suckle after standing than male calves. Results showed that even purebred or crossbred Bos indicus calves in subtropical environmental need extra care when born on rainy days, especially during the first hours of the day. (C) 2006 Elsevier B.V. All rights reserved.
Resumo:
Dry matter intake (DMI) of coast-cross grazing by crossbred Holstein-Zebu and Zebu lactating cows was calculated using in vitro dry matter digestibility from extrusa (four esophageal fistulated cows) and fecal output estimate with mordent chromium. Pasture was rotationally grazed with three days grazing period and 27 days testing period, adopting a stocking rate of 1.6 and 3.2 cows/ha, during the dry and rainy season respectively. Voluntary DMI was estimated from degradation characteristics using different equations. Predicted coast-cross DMI varied with models. The prediction of tropical forages dry matter intake from equations based in ruminal degradation parameters needs farther investigation before being employed in practice.
Resumo:
Thin films of BaBi2Ta2O9 (BBT) composition were prepared through the metal organic decomposition method. The crystallinity, phase formation, crystallite size and morphology of the thin films were measured as a function of the type of substrate, stoichiometry of solution and process variables such as thickness and temperature. The thin films were investigated by grazing incidence X-ray diffractometry and atomic force microscopy (AFM) techniques. For the sample without excess of bismuth, diffraction peaks other than that of the BBT phase were observed. A well crystallized BBT single phase was observed for films prepared from a solution with 10% excess of bismuth, deposited on Si/Pt substrate, with a thickness up to 150 nm and sintered at temperatures of 700 degreesC. The thin BBT phase films heat-treated at 600 degreesC presented a diffraction pattern characteristic of samples with lower degree of crystallinity whereas for the thin films heat-treated at 800 degreesC, we observed the presence of other phases than the BBT. For the thin film deposited on the Sin+ substrate, we observe that the peaks corresponding to the BBT phase are broader than that observed on the samples deposited on the Pt and Si/Pt substrates. No variation of average crystallite size was observed as the excess of Bi increased from 10 to 20%. AFM images for the samples showed that the increasing the amount of bismuth promotes grain growth. The average surface roughness measured was in the range of 16-22 nm showing that the bismuth amount had no or little effect on the roughness of films. (C) 2002 Elsevier B.V. B.V. All rights reserved.
Resumo:
Statement of problem. Although most of the physical properties of denture base resin polymerized by microwave energy have been shown to be similar to resins polymerized by the conventional heat polymerization method, the presence of porosity is a problem.Purpose. This study evaluated the effect of different microwave polymerization cycles on the porosity of a denture base resin designed for microwave polymerization.Material and methods. Thirty-two rectangular resin specimens (65 X 40 X 5 mm) were divided into 3 experimental groups (A, B, and C; Onda-Cryl, microwave-polymerized resin) and I control group (T; Classico, heat-polymerized resin), according to the following polymerization cycles: (A) 500 W for 3 minutes, (B) 90 W for 13 minutes + 500 W for 90 seconds, (C) 320 W for 3 minutes + 0 W for 4 minutes + 720 W for 3 minutes, and (T) 74degreesC for 9 hours. Porosity was calculated by measurement of the specimen volume before and after its immersion in water. Data were analyzed using 1-way analysis of variance (alpha = .05).Results. The mean values and SDs of the percent mean porosity were: A = 1.05% +/- 0.28%, B = 0.91% +/- 0.15%, C = 0.88% +/- 0.23%, T = 0.93% +/- 0.23%. No significant differences were found in mean porosity among the groups evaluated.Conclusion. Within the limitations of this study, a denture base resin specifically designed for microwave Polymerization tested was not affected by different polymerization cycles. Porosity was similar to the conventional heat-polymerized denture base resin tested.
Resumo:
Methane and carbon dioxide seasonal cycles during years 1998 and 1999 at two Brazilian urban and inland sites are presented. The mixing ratio averages over the studied period of time were 1.80 ppm CH4 and 384.7 ppm CO2. A comparison is made between continental averages and the averages of the three nearest global network background sites of NOAA-CMDL comprising Ascension Island, Namibia and Easter Island. Inland sites had 0.08 ppm or 4.9% more CH4 and 19.0 ppm or 4.9% more CO2 than background over the same time span. The CH4 summer minimum observed in remote sites was also detected inland. During the month of October 98 and 99 inland mixing ratios were frequently similar to background.