Avaliação do gerenciamento e disposição final dos resíduos químicos de laboratórios do IGCE, UNESP - Rio Claro/SP

Laboratory of Chemical Waste Management programs are being implemented in various universities of the country and the world, in recognition of the urgent need to change the reality of disregard for the environment, together with objective responsibility of the generator, and especially the awareness of sustainability. Analysis and research laboratories involve a range of waste in developing their studies with intrinsic characteristics related to their form of generation. The amount of waste generated in this segment is negligible compared to industrial activities, but the environmental issue is that these residues do not have a standard technique for treatment due to the potential variation of its composition. This research project, aiming their suitability and continuous improvement, aims to diagnose and analyze the current situation of the management and disposal of chemical waste generated by the laboratories IGCE UNESP, Campus Rio Claro / SP. Universities, through their research, teaching and extension, end up generating potentially hazardous chemicals that may contaminate the environment when they are disposed of improperly, with no concern for the environment and / or public health. Aiming to assist in improvements with respect to this issue, the purpose of this study is to understand the management and disposal of chemical waste from the IGCE, laboratories UNESP - Rio Claro / SP, in order to discuss the situation of such waste, and present proposals to reduce generation of the same and minimizing the environmental impact, thereby increasing the local hygiene through proper disposal. The research instrument used interviews, questionnaires, review of recent literature and observations were made in order to develop proposals for the management and disposal of waste. These proposals based on prevention and corrective control, where the preventive approach aims at lifting techniques and actions to reduce the generating sources and...

Gerenciamento dos resíduos de serviços de saúde do pronto socorro de um hospital escola na cidade de Botucatu

Health Care Waste (HCW) represents 1%, and it has presently gained a lot of importance. Adequate management is one of the great challenges to be faced by health care centers. It has gained distinction and been widely discussed by members of the sectors involved with sanitation, public health and environmental issues due to waste physical, chemical biological characteristics, which pose potential risk to the environment and public health. The present study aims at evaluating HCW internal management by following all its phases, determining indicators, classifying and quantifying, establishing production rates (kg /patient/day) for the sector and designing materials to disseminate appropriate HCW disposal in the Emergency Room of the UNESP University Hospital in the city of Botucatu according to the guidelines presently in force. : From June to October 2011, the waste flow was observed from its production to final disposal. Four weight measurements were performed on four consecutive days in the month of August by using a properly calibrated (in grams) digital scale at the times scheduled for collection of the produced waste. Hence, the daily and monthly amounts were estimated according to their classification. All the waste packaged in the bags in garbage cans in the Emergency Room for a 24-hour period was considered to be a sample. Separation was not adequately performed in that sector, and waste from Group A was mixed with that from Group D. The amount of infectious waste produced in the sector corresponded to 87.80 %, common waste to 10.93 % and recyclable waste to 1.27%. The mean daily HCW production was of 123.300 kg/day, and the total monthly production was of 3,822 kg/month, which was distributed as follows: Group A 3,355,750 kg/month; Group D 417,570 kg/month and recyclables 48,670 kg/month. The production rate corresponded to 0.47 kg/patient/day, thus showing... (Complete abstract click electronic access below)

Estudo da existencia de polimorfos de diclofenacon de sódio em matérias primas provenientes de diferentes fornecedores

A qualidade dos medicamentos constitui um fator fundamental para assegurar a sua eficária terapêutica e minimizar a ocorrência de efeitos indesejados decorrentes de presença de impurezas, produtos de degradação e presença de diferentes estruturas cristalinas, também denominadas polimorfos. Este trabalho tem como objetivo avaliar a existência de polimorfos em matérias primas oferecidas por fornecedores distintos, um fármaco de uso comum no Brasil,– o diclofenaco de sódio – interpretados a partir de diferentes métodos de análise instrumentais. O polimorfismo de fármacos, um assunto bastante atual, tem grande impacto em estudos pré e pós-registro de medicamentos, do referência ao genérico, passando pelo similar. Assim, com o estudo feito em um antiinflamatório bastante popular e largamente utilizado no mercado, podemos visualizar a grandeza da importância da análise da existência de polimorfos em matérias primas

Zoneamento acústico urbano e mapeamento de níveis sonoros na zona central de Rio Claro (SP): diretrizes para o gerenciamento do ruído integrado ao planejamento ambiental urbano

Considering the growing degradation of the urban environmental quality resulting from the progressive sound pollution increase, as well as the consequent harmful effects about the human health, the present study had its central objective the argument and management tools implementation of the urban noise that can be integrated to the environmental planning in the city of Rio Claro (SP). Therefore, normative and bibliographical revisions were developed, that made feasible the directives of control argument and prevention of the urban noise, as well as the technical procedures of sound levels and evaluation’s definition and especially about the criteria applicable for the elaboration of an urban acoustic zoning methodology. Among the main results obtained detach: (1) the applicable legislation to the management of urban noise’s synthesis and argument; (2) the methodology of urban acoustic zoning development and (3) its implementation to determined areas of Rio Claro (SP) with the (4) respective cartography representation; (5) the mapping of sound levels in the central zone of Rio Claro (SP), (6) the obtaining and analysis of noise describers (LAeq, Lmáx, L10, L50, L90, Lmin and TNI) and the subsequent (7) acoustic maps elaboration for the main describers.

Abordagem scrum de gerenciamento ágil para desenvolvimento de novos produtos aplicada a área de ensaios de uma fabricante de aeronaves

There are many approaches and techniques about Administration and Management of Projects in order to provide greater agility, efficiency and transparency during the development process of new products. Simultaneously, a pursuit for a management approach more flexible in its planning and strategic changes during the development campaign, such as, comprehend the project's unpredictability level and deal it by monitoring and estimates tools. These features tend to accentuate itself in manufacturers of complex products, as aircraft and other aerospace technologies. By these conditions thus research aims to describe a case when the Agile Management Processing of Project Development Scrum was used in the Test area of an aircraft manufacturer. Focused on the Scrum implementation over the area, its adaptation, evolution and achievements the research proposes to analyze the improvements, indicate the obstacles and discuss solutions, contributing then to the theoretical basis of the considered theme and futures updates applicable to the area. The research is classified as qualitative; furthermore the information and data analyzed were obtained by interviews with professionals and observations of the processes from the major aircraft manufacturer

Estudo comparativo de fornecedores de piche

This present study aimed at developing a methodology for analyzing on the feasibility of a new supplier of raw materials, industrial of aluminum production technology Soederberg. This raw material is pitch, which will be used in the manufacture of anodes for the electrolytic pot. The supplier to be analyzed is the Chemcoal of Ukrainian origin. Thereby developing techniques for a complete analysis, targeting the physical and chemical properties of pitch, economic feasibility and potential impacts on the client, potroom where these impacts may affect the production of aluminum, skimming factor, bubble noise, plasticity top anode and the anode consumption. After planning the test that was conducted on two strategies to generate greater traceability of impacts, data were collected and then it was made a statistical treatment of the data using statistical tools to generate the minitab greater reliability of results

PGCP - Plataforma para Gerenciamento Colaborativo de Projetos

Collaborative Systems are designed to support individuals in order to solve a problem together, or cooperatively (or collaboratively). Such systems have the advantage of not requiring the presence in the same location of the participants. The basis of any Collaborative System is communication, where users interact with each other in order to exchange information. Communication among individuals is accomplished through collaborative tools such as chat, email, document repository, etc.. Using these tools, companies can reduce operational costs, saving on travel and accommodation of its employees to attend meetings. The project members only need a computer with internet access to use collaborative tools. Project management is essential to the quality of the nal product. To perform a proper management, methodologies must be applied using methods, tools and procedures. There are some phases that are considered generic for all software process models, they are: de nition, development, maintenance and activity to support the software process. In this paper is described a platform for project management using the concepts and features of Collaborative Systems. The goal of this platform is to unify various collaborative tools (such as chat and document repository) in a project management system. Using the system, it becomes possible to manage projects, and the ability to maintain an active constant communication between members of each project

Proposta de um processo de categorização de fornecedores para a execução de projetos

Nowadays, in business environment, organizations seek to differentiate through special programs and plans, taking the concepts of sustainability, performance and benefits generated for society. Based in this competitive environment, as companies depend on the use of subcontractors to perform services for your different customers, the work performed by them is directly related to the vision created by the final customer’s vision of the company responsible for the project. Considering that the supplier hired to execute the project does not share the strategic concepts related to the level of services to be offered to the final customers, thus creating the need to develop methods that enable the alignment between the project owner, responsible for preparing the executive project, and the supplier, responsible for the execution of the work. Tangent to this need, it was necessary to create a method of evaluation and categorization for suppliers to hired for the projects. As a result it has been proposed a process of categorization of suppliers, through the restriction of possible companies to be hired for a project designed to promote alignment between strategies and continuous improvement of the solutions offered to the market

Aumento da precisão do controle de estoque: pesquisa ação em indústria de bens de consumo

This work is an action research conducted in an industry of consumer goods, presenting a new model of inventory management in the company's processors. This replacement of the inventory management of the company stemmed from the need to reduce the large number of deviations in the product write off in stock, thereby generating a low accuracy and reliability of data on inventories of processors shown by the company's ERP system. Spending on inventory adjustments could thus be reduced with the implementation of the new model, thus generating a cost savings for the company and thus increasing their competitive potential in the market. In the old system adopted by the company, write off raw material inventory was done automatically by the system for customized transactions by the company. However, since the implementation of ERP in the company, the automatic write off based on historical consumption of each product were made in many cases at random, generating a lot of mistakes. The new management system has replaced the automatic system by manual at the time of the return of the processed product in the company, thus creating a control which lots and quantities were consumed in the processing and making the stock shown by the ERP reliable and accurate

Proposta de um procedimento de trabalho para gerenciamento de estoque em uma instituição pública de ensino superior

This paper aims to discuss the system of inventory management in a public university. The present paper shows the definitions, classification of materials and the advantages and disadvantages of storage, besides exposing the public procurement bidding system since the acquisition until receipt of materials to be stored. This paper presents a survey of the items stored in the warehouse and use of control tools such as ABC curve to demand flow prized for verification of critical items and idle items. Displays also a calculation for the minimum value of stock and replacement of an item in inventory and an analysis of the conditions of the warehouse layout. As a result, knowledge is acquired and a revised system of inventory management of the institution was proposed

Gerenciamento de inventário por meio de ferramentas de controle da produção em empresas de higiene pessoal, perfumaria e cosméticos

This action-research work presents tools which are related to production monitoring: Follow-up of Products Release from Quality Department and Follow-up of Production Volumes. Both tools allows controlling release delays of finished goods based on the quality specifications, and the accurate analysis of production volumes variations compared to pre-established plans. They have direct impact into enterprises inventory levels that are part of Toiletries, Perfumery and Cosmetics market segment. By applying these tools, it´s possible to identify opportunities for process optimization that brings benefits for the final customer. The results seen by the tools application are presented by the analysis of delayed stock for release quantities evolution and testimonies from professionals of Supply Chain

Controle de qualidade e qualificação de fornecedores de matérias primas utilizadas em uma farmácia de manipulação

Este trabalho apresenta uma proposta de qualificação de fornecedores de matérias primas para uma farmácia na cidade de Araraquara, estado de São Paulo. A qualificação de fornecedores é um processo de extrema importância no que diz respeito ao produto acabado e, para que tenha qualidade, essa qualidade deve vir desde as matérias primas que o compõem. A RDC nº 67 de 8 de outubro de 2007 diz que as farmácias devem adquirir matérias primas apenas de fornecedores qualificados. Para o processo de qualificação, a mesma RDC diz que devem ser feitas auditorias e levantamentos de dados dos fornecedores, bem como o controle de qualidade das matérias primas fornecidas. Foram escolhidas quatro matérias primas utilizadas pela farmácia de três fornecedores diferentes. O processo começou com o envio de questionários avaliativos, onde cada fornecedor deveria colocar as informações solicitadas. O passo seguinte é o controle de qualidade das matérias primas. A partir dos dados dos questionários e dos resultados do controle de qualidade, acrescidos de outros fatores como prazo de entrega, compõe-se o Índice de Qualificação do Fornecedor (IQF), que é como uma “nota” que o fornecedor recebe e, através desse índice, pode ser DESQUALIFICADO, QUALIFICADO ou ainda CERTIFICADO. A certificação ocorre após a auditoria do estabelecimento do fornecedor e também entra na composição do IQF. Após o processo de qualificação dos três fornecedores, foi elaborado um Procedimento Operacional Padrão (POP) com todas as etapas que devem ser feitas para a qualificação...

Plano de gerenciamento sustentável dos resíduos de construção civil. O caso de Rio Claro (SP)

The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.

Enfermagem e o gerenciamento de custos: revisão sistemática nacional e internacional

Objectives: conduct a systematic review of national and international literature, to classify the types of production, comparing the two literatures and synthesize knowledge in the area. Method: Systematic Review of Literature, in the databases LILACS, CINAHL and MEDLINE for selection of articles in their entirety, the data extracted from the articles selected were: the study of bibliographic information (title, author, journal, place of study and year of publication), and general information (multidisciplinary production or specific area, language, type of study, type of population and contributions of the study). The categories established for classification of publications were: raising the cost of procedures/ interventions, economic evaluation of specific intervention, inclusion of nursing in the economic context, using cost as an important variable in the study. Results: The study included 39 publications, with 31% of national production and the remaining 69%, internationally. Most publications were classified according to category of economic evaluation of specific intervention, followed by the category of raising the cost of procedure / intervention, which fits the majority of national production. Human resources is shaped as an important variable for obtaining cost studies that proposed to make this calculation. Conclusion: The production of literature in nursing cost management is relevant in number of publications within the proposed period and is directed to different areas within this theme. There are significant differences in national and international literature: these last use more accurate methods, have more content theorized, use more the economic evaluation tools and related more costs with a amplified context. The production of such knowledge should continue as far as possible and putting that knowledge relating the current reality, in order to amplify the field of nursing and add value

Seleção de fornecedores em uma indústria de transformadores utilizando o método de análise hierárquica

The optimal supply chain management (SCM) is considered by the companies a new frontier in order to gain efficiently competitive advantage. Through the SCM companies must define their competitive strategies by positioning inside the supply chain wich belongs both as suppliers and as consumers. The main objectives of SCM is integrate multiple suppliers to satisfy the market demand and make possible the synergies between the parts of the supply chain in order to better serve the consumer Meanwhile, selection, evaluation and development of suppliers play important roles in establishing an efficient supply chain. Thus, the SCM covers elements such as manufacturing, assembly, raw materials, and distribution to the final consumer. Due to the factors described, the focus of this paper is to present the Analytic Hierarchical Process (AHP) application as an appropriate and structured method for the supplier selection of a strategic line of low voltage transformers of a transformers industry and compare it with the selection process currently used by this industry, showing the advantages of applying a multiple criteria decision making method. In this study, the research methodology used was modeling and simulation