Benchmarking 2D hydraulic models for urban flooding

This paper describes benchmark testing of six two-dimensional (2D) hydraulic models (DIVAST, DIVASTTVD, TUFLOW, JFLOW, TRENT and LISFLOOD-FP) in terms of their ability to simulate surface flows in a densely urbanised area. The models are applied to a 1·0 km × 0·4 km urban catchment within the city of Glasgow, Scotland, UK, and are used to simulate a flood event that occurred at this site on 30 July 2002. An identical numerical grid describing the underlying topography is constructed for each model, using a combination of airborne laser altimetry (LiDAR) fused with digital map data, and used to run a benchmark simulation. Two numerical experiments were then conducted to test the response of each model to topographic error and uncertainty over friction parameterisation. While all the models tested produce plausible results, subtle differences between particular groups of codes give considerable insight into both the practice and science of urban hydraulic modelling. In particular, the results show that the terrain data available from modern LiDAR systems are sufficiently accurate and resolved for simulating urban flows, but such data need to be fused with digital map data of building topology and land use to gain maximum benefit from the information contained therein. When such terrain data are available, uncertainty in friction parameters becomes a more dominant factor than topographic error for typical problems. The simulations also show that flows in urban environments are characterised by numerous transitions to supercritical flow and numerical shocks. However, the effects of these are localised and they do not appear to affect overall wave propagation. In contrast, inertia terms are shown to be important in this particular case, but the specific characteristics of the test site may mean that this does not hold more generally.

How many facets are needed to represent the surface energy balance of an urban area?

We investigate the question of how many facets are needed to represent the energy balance of an urban area by developing simplified 3-, 2- and 1-facet versions of a 4-facet energy balance model of two-dimensional streets and buildings. The 3-facet model simplifies the 4-facet model by averaging over the canyon orientation, which results in similar net shortwave and longwave balances for both wall facets, but maintains the asymmetry in the heat fluxes within the street canyon. For the 2-facet model, on the assumption that the wall and road temperatures are equal, the road and wall facets can be combined mathematically into a single street-canyon facet with effective values of the heat transfer coefficient, albedo, emissivity and thermodynamic properties, without further approximation. The 1-facet model requires the additional assumption that the roof temperature is also equal to the road and wall temperatures. Idealised simulations show that the geometry and material properties of the walls and road lead to a large heat capacity of the combined street canyon, whereas the roof behaves like a flat surface with low heat capacity. This means that the magnitude of the diurnal temperature variation of the street-canyon facets are broadly similar and much smaller than the diurnal temperature variation of the roof facets. Consequently, the approximation that the street-canyon facets have similar temperatures is sound, and the road and walls can be combined into a single facet. The roof behaves very differently and a separate roof facet is required. Consequently, the 2-facet model performs similarly to the 4-facet model, while the 1-facet model does not. The models are compared with previously published observations collected in Mexico City. Although the 3- and 2-facet models perform better than the 1-facet model, the present models are unable to represent the phase of the sensible heat flux. This result is consistent with previous model comparisons, and we argue that this feature of the data cannot be produced by a single column model. We conclude that a 2-facet model is necessary, and for numerical weather prediction sufficient, to model an urban surface, and that this conclusion is robust and therefore applicable to more general geometries.

Short-range urban dispersion experiments using fixed and moving sources

Four perfluorocarbon tracer dispersion experiments were carried out in central London, United Kingdom in 2004. These experiments were supplementary to the dispersion of air pollution and penetration into the local environment (DAPPLE) campaign and consisted of ground level releases, roof level releases and mobile releases; the latter are believed to be the first such experiments to be undertaken. A detailed description of the experiments including release, sampling, analysis and wind observations is given. The characteristics of dispersion from the fixed and mobile sources are discussed and contrasted, in particular, the decay in concentration levels away from the source location and the additional variability that results from the non-uniformity of vehicle speed. Copyright © 2009 Royal Meteorological Society

Mean flow and turbulence statistics over groups of urban-like cubical obstacles

Direct numerical simulations of turbulent flow over regular arrays of urban-like, cubical obstacles are reported. Results are analysed in terms of a formal spatial averaging procedure to enable interpretation of the flow within the arrays as a canopy flow, and of the flow above as a rough wall boundary layer. Spatial averages of the mean velocity, turbulent stresses and pressure drag are computed. The statistics compare very well with data from wind-tunnel experiments. Within the arrays the time-averaged flow structure gives rise to significant 'dispersive stress' whereas above the Reynolds stress dominates. The mean flow structure and turbulence statistics depend significantly on the layout of the cubes. Unsteady effects are important, especially in the lower canopy layer where turbulent fluctuations dominate over the mean flow.

Initial results from Phase 2 of the international urban energy balance model comparison

Urban land surface schemes have been developed to model the distinct features of the urban surface and the associated energy exchange processes. These models have been developed for a range of purposes and make different assumptions related to the inclusion and representation of the relevant processes. Here, the first results of Phase 2 from an international comparison project to evaluate 32 urban land surface schemes are presented. This is the first large-scale systematic evaluation of these models. In four stages, participants were given increasingly detailed information about an urban site for which urban fluxes were directly observed. At each stage, each group returned their models' calculated surface energy balance fluxes. Wide variations are evident in the performance of the models for individual fluxes. No individual model performs best for all fluxes. Providing additional information about the surface generally results in better performance. However, there is clear evidence that poor choice of parameter values can cause a large drop in performance for models that otherwise perform well. As many models do not perform well across all fluxes, there is need for caution in their application, and users should be aware of the implications for applications and decision making.

Cats about town: is predation by free-ranging pet cats Felis catus likely to affect urban bird populations?

Even though they are fed daily by their owners, free-ranging pet cats Felis catus may kill wild birds and, given their high densities (typically > 200 cats/km(2)), it has been postulated that cat predation could be a significant negative factor affecting the dynamics of urban bird populations. In this study, we: (1) used questionnaire surveys in 10 sites within the city of Bristol, UK, to estimate cat density; (2) estimated the number of birds killed annually in five sites by asking cat owners to record prey animals returned home; and then (3) compared the number of birds killed with breeding density and productivity to estimate the potential impact of cat predation. In addition, we (4) compared the condition of those birds killed by cats versus those killed in collisions, e.g. window strikes. Mean (+/- sd) cat density was 348 +/- 86 cats/km(2) (n = 10 sites); considering the eight species most commonly taken by cats, the mean ratios of adult birds/cats and juvenile birds/cats across the five sites were 1.17 +/- 0.23 and 3.07 +/- 0.74, respectively. Approximately 60% of the cats studied for up to 1 year at each site never returned any prey home; despite this, the estimated number of birds killed was large relative to their breeding density and productivity in many sites. Across species, cat-killed birds were in significantly poorer condition than those killed following collisions; this is consistent with the notion that cat predation represents a compensatory rather than additive form of mortality. Interpretation of these results is, however, complicated by patterns of body mass regulation in passerines. The predation rates estimated in this study would suggest that cats were likely to have been a major cause of mortality for some species of birds. The effect of cat predation in urban landscapes therefore warrants further investigation. The potential limitations of the current study are discussed, along with suggestions for resolving them.

Nocturnal ranging behaviour of urban hedgehogs, Erinaceus europaeus, in relation to risk and reward

Urban areas have both positive and negative influences on wildlife. For terrestrial mammals, one of the principle problems is the risk associated with moving through the environment whilst foraging. In this study, we examined nocturnal patterns of movement of urban-dwelling hedgehogs (Erinaceus europaeus) in relation to (i) the risks posed by predators and motor vehicles and (ii) nightly weather patterns. Hedgehogs preferentially utilised the gardens of semi-detached and terraced houses. However, females, but not males, avoided the larger back gardens of detached houses, which contain more of the habitat features selected by badgers. This difference in the avoidance of predation risk is probably associated with sex differences in breeding behaviour. Differences in nightly movement patterns were consistent with strategies associated with mating behaviour and the accumulation of fat reserves for hibernation. Hedgehogs also exhibited differences in behaviour associated with the risks posed by humans; they avoided actively foraging near roads and road verges, but did not avoid crossing roads per se. They were, however, significantly more active after midnight when there was a marked reduction in vehicle and foot traffic. In particular, responses to increased temperature, which is associated with increased abundance of invertebrate prey, were only observed after midnight. This variation in the timing of bouts of activity would reduce the risks associated with human activities. There were also profound differences in both area ranged and activity with chronological year which warrant further investigation.

The International Urban Energy Balance Models Comparison Project: First Results from Phase 1

A large number of urban surface energy balance models now exist with different assumptions about the important features of the surface and exchange processes that need to be incorporated. To date, no com- parison of these models has been conducted; in contrast, models for natural surfaces have been compared extensively as part of the Project for Intercomparison of Land-surface Parameterization Schemes. Here, the methods and first results from an extensive international comparison of 33 models are presented. The aim of the comparison overall is to understand the complexity required to model energy and water exchanges in urban areas. The degree of complexity included in the models is outlined and impacts on model performance are discussed. During the comparison there have been significant developments in the models with resulting improvements in performance (root-mean-square error falling by up to two-thirds). Evaluation is based on a dataset containing net all-wave radiation, sensible heat, and latent heat flux observations for an industrial area in Vancouver, British Columbia, Canada. The aim of the comparison is twofold: to identify those modeling ap- proaches that minimize the errors in the simulated fluxes of the urban energy balance and to determine the degree of model complexity required for accurate simulations. There is evidence that some classes of models perform better for individual fluxes but no model performs best or worst for all fluxes. In general, the simpler models perform as well as the more complex models based on all statistical measures. Generally the schemes have best overall capability to model net all-wave radiation and least capability to model latent heat flux.