940 resultados para Flexural members
Resumo:
Posttraumatic stress disorder (PTSD) is reported to be caused by exposure to traumatic events including (but not limited to) military combat, violent personal assault, being kidnapped or taken hostage and terrorist attacks. Initial data suggest that at least 1 out of 6 Iraq War veterans are exhibiting symptoms of depression, anxiety and PTSD. Virtual reality (VR) delivered exposure therapy for PTSD has been used with reports of positive outcomes. The aim of the current paper, is to present the rationale and brief description of a Virtual Iraq/Afghanistan PTSD VR therapy application and present initial findings from its use with PTSD patients. Thus far, Virtual Iraq/Afghanistan consists of a series of customizable virtual scenarios designed to represent relevant Middle Eastern VR contexts for exposure therapy, including a city and desert road convoy environment. User-centered design feedback, needed to iteratively evolve the system, was gathered from returning Iraq War veterans in the USA and from a system deployed in Iraq and tested by an Army Combat Stress Control Team. Results from an open clinical trial at San Diego Naval Medical Center of the first 20 treatment completers indicate that 16 no longer met PTSD screening criteria at post-treatment, with only one not maintaining treatment gains at 3 month follow-up.
Resumo:
A periodic structure of finite extent is embedded within an otherwise uniform two-dimensional system consisting of finite-depth fluid covered by a thin elastic plate. An incident harmonic flexural-gravity wave is scattered by the structure. By using an approximation to the corresponding linearised boundary value problem that is based on a slowly varying structure in conjunction with a transfer matrix formulation, a method is developed that generates the whole solution from that for just one cycle of the structure, providing both computational savings and insight into the scattering process. Numerical results show that variations in the plate produce strong resonances about the ‘Bragg frequencies’ for relatively few periods. We find that certain geometrical variations in the plate generate these resonances above the Bragg value, whereas other geometries produce the resonance below the Bragg value. The familiar resonances due to periodic bed undulations tend to be damped by the plate.
Resumo:
Purpose – This study seeks to provide a review of the background and context to the engagement of RICS members with the sustainability agenda, and to examine the extent to which the surveying profession uses relevant information, tools and techniques to achieve the key objectives of sustainable development (or sustainability). Design/methodology/approach – The paper analyses results from a major international online survey of 4,600 RICS respondent members, supported by 31 structured telephone interviews. Findings – The results suggest that, although sustainability is highly relevant to RICS members’ work, a lack of knowledge and expertise is making it more difficult for sustainability tools and other information to be used effectively. Research limitations/implications – The survey is based on a substantial number of responses which are broadly representative of the global RICS population. A key implication is that “laggard” faculties include the disciplines of commercial property and valuation. Practical implications – The research suggests that key stakeholders must work together to provide better information, guidance and education and training to “hardwire” the sustainability agenda across RICS faculties. Originality/value – This is the first truly global survey of its kind and focuses particularly on those faculties that play a major role in property investment and finance (i.e. valuation and commercial property), comparing their position with that of other faculties in an international context.
Resumo:
This paper reports part of a qualitative study into evolving practice in the implementation of the Dispute Adjudication Board (DAB) construction dispute resolution technique, a variant of the Dispute Review Board (DRB) concept used in the US and Canada. Data was collected through a focus group interview of 20 highly experienced dispute resolution practitioners from engineering and the law. The group was assembled from members of FIDIC-NET with direct experience of project DABs. The part reported here concerns practice and procedure for establishing DABs. The main findings are that: constitution of the DABs is often delayed because of either project owners' ignorance of the DAB process or deterrence by the cost of the DABs; such owners also tend to insist on appointing DAB members from local engineers and lawyers without sufficient understanding of the DAB process; rates of remuneration of DAB members vary widely; the training provision for DAB membership and advocacy skills is inadequate; the process of selecting candidates for DAB membership and negotiating the tripartite agreement between each member and the contractual parties needs to be navigated with great care to avoid raising ethical problems. The research contribution is threefold. First, it highlights the importance of realistic fees for DAB members within a standard framework in achieving timely establishment of a board that works well as a team. Second, it illustrates the use of qualitative focus group interview to study the impact of new contract terms from multiple stakeholder perspectives. Finally, it identifies areas where further research is needed.
Resumo:
Background Lipoxygenases (LOXs), a type of non-haem iron-containing dioxygenase, are ubiquitous enzymes in plants and participate in the formation of fruit aroma which is a very important aspect of fruit quality. Amongst the various aroma volatiles, saturated and unsaturated alcohols and aldehydes provide the characteristic aroma of the fruit. These compounds are formed from unsaturated fatty acids through oxidation, pyrolysis and reduction steps. This biosynthetic pathway involves at least four enzymes, including LOX, the enzyme responsible for lipid oxidation. Although some studies have been conducted on the LOX gene family in several species including Arabidopsis, soybean, cucumber and apple, there is no information from pear; and the evolutionary history of this gene family in the Rosaceae is still not resolved. Results In this study we identified 107 LOX homologous genes from five Rosaceous species (Pyrus bretschneideri, Malus × domestica, Fragaria vesca, Prunus mume and Prunus persica); 23 of these sequences were from pear. By using structure analysis, phylogenic analysis and collinearity analysis, we identified variation in gene structure and revealed the phylogenetic evolutionary relationship of this gene family. Expression of certain pear LOX genes during fruit development was verified by analysis of transcriptome data. Conclusions 23 LOX genes were identified in pear and these genes were found to have undergone a duplication 30–45 MYA; most of these 23 genes are functional. Specific gene duplication was found on chromosome4 in the pear genome. Useful information was provided for future research on the evolutionary history and transgenic research on LOX genes.
Resumo:
The redesign of defined benefit pension schemes usually results in a substantial redistribution of wealth between age cohorts of members, pensioners, and the sponsor. This is the first study to quantify the redistributive effects of a rule change by a real world scheme (the Universities Superannuation Scheme, USS) where the sponsor underwrites the pension promise. In October 2011 USS closed its final salary scheme to new members, opened a career average revalued earnings (CARE) section, and moved to ‘cap and share’ contribution rates. We find that the pre-October 2011 scheme was not viable in the long run, while the post-October 2011 scheme is probably viable in the long run, but faces medium term problems. In October 2011 future members of USS lost 65% of their pension wealth (or roughly £100,000 per head), equivalent to a reduction of roughly 11% in their total compensation, while those aged over 57 years lost almost nothing. The riskiness of the pension wealth of future members increased by a third, while the riskiness of the present value of the sponsor’s future contributions reduced by 10%. Finally, the sponsor’s wealth increased by about £32.5 billion, equivalent to a reduction of 26% in their pension costs.
Resumo:
P>Estimates of effective elastic thickness (T(e)) for the western portion of the South American Plate using, independently, forward flexural modelling and coherence analysis, suggest different thermomechanical properties for the same continental lithosphere. We present a review of these T(e) estimates and carry out a critical reappraisal using a common methodology of 3-D finite element method to solve a differential equation for the bending of a thin elastic plate. The finite element flexural model incorporates lateral variations of T(e) and the Andes topography as the load. Three T(e) maps for the entire Andes were analysed: Stewart & Watts (1997), Tassara et al. (2007) and Perez-Gussinye et al. (2007). The predicted flexural deformation obtained for each T(e) map was compared with the depth to the base of the foreland basin sequence. Likewise, the gravity effect of flexurally induced crust-mantle deformation was compared with the observed Bouguer gravity. T(e) estimates using forward flexural modelling by Stewart & Watts (1997) better predict the geological and gravity data for most of the Andean system, particularly in the Central Andes, where T(e) ranges from greater than 70 km in the sub-Andes to less than 15 km under the Andes Cordillera. The misfit between the calculated and observed foreland basin subsidence and the gravity anomaly for the Maranon basin in Peru and the Bermejo basin in Argentina, regardless of the assumed T(e) map, may be due to a dynamic topography component associated with the shallow subduction of the Nazca Plate beneath the Andes at these latitudes.
Resumo:
This study evaluated the phylogenetic relationship among samples of ""Chantransia"" stage of the Batrachospermales and Thoreales from several regions of the world based on sequences of two genes-the plastid-encoded RUBISCO LSU gene (rbcL) and the nuclear SSU ribosomal DNA gene (SSU rDNA). All sequences of ""Chantransia macrospora"" were shown to belong to Batrachospermum macrosporum based on both molecular markers, confirming evidence from previous studies. In contrast, nine species are now associated with ""Chantransia pygmaea,"" including seven species of the Batrachospermales and two of the Thoreales. Therefore, the presence of ""C. macrospora"" in a stream can be considered reliable evidence that it belongs to B. macrosporum, whereas the occurrence of ""C. pygmaea"" does not allow the recognition of any particular species, since it is associated with at least nine species. Affinities of ""Chantransia"" stages to particular taxa were congruent for 70.5% of the samples comparing the rbcL and SSU analyses, which were associated with the same or closely related species for both markers. Sequence divergences have been reported in the ""Chantransia"" stage in comparison to the respective gametophyte, and this matter deserves further attention.
Resumo:
Objective: To evaluate the flexural strength, microleakage, and degree of conversion of a microhybrid resin polymerized with argon laser and halogen lamp. Method and Materials: For both flexural test and degree of conversion analysis, 5 bar samples of composite resin were prepared and polymerized according to ISO 4049. The halogen light-curing unit was used with 500 MW/cm(2) for 20 seconds and the argon laser with 250 mW for 10 and 20 seconds. Samples were stored in distilled water in a dark environment at 37 degrees C for 24 hours. The flexural property was quantified by a 3-point loading test. For the microleakage evaluation, 60 bovine incisors were used to prepare standardized Class 5 cavities, which were restored and polished. Specimens were stored in distilled water for 24 hours at 37 degrees C and thermocycled 500 times (6 degrees C to 60 degrees C). Specimens were then immersed in art aqueous solution of basic fuchsin for 24 hours. Longitudinal sections of each restoration were obtained and examined with a stereomicroscope for qualitative evaluation of microleakage. Fourier transform (FT)-Raman RFS 100/S spectrometer (Bruker) was used to analyze the degree of conversion. Results: ANOVA showed no statistically significant differences of flexural strength between the photoactivation types evaluated in the flexural study. Microleakage data were statistically analyzed by Mann-Whitney and Kruskal-Wallis tests. Enamel margins resulted in a statistically lower degree of leakage than dentin margins. No statistically significant difference was found among the 3 types of photocuring studied. ANOVA also showed no statistically significant difference in the degree of conversion among the studied groups. Conclusion: According to the methodology used in this research, the argon laser is a possible alternative for photocuring, providing the same quality of polymerization as the halogen lamp. None of the photocured units tested in this study completely eliminated microleakage.