Sex determination studies in two species of teleost fish, Oreochromis niloticus and Leporinus elongatus

Genetic analyses of sex determination have identified sex chromosomes in many teleost fish species. However, there are several cases for which sex ratios do not fit perfectly with the expectations of heterogametic systems, suggesting the influence of either minor sex determining genes or environmental influences on the process of sex differentiation. The frequent absence of sex chromosome markers makes the identification of minor sex-determining genes very difficult. It is easier to test first the hypothesis of environmental sex determination (ESD) by studying the temperature effect, since temperature-dependent sex determination has been demonstrated to occur in several vertebrate groups including 1 fish species. To contribute to a better understanding of fish sex determination, we have tested the effects of high temperatures on sex ratios of Oreochromis niloticus, and have attempted to isolate sex chromosome molecular markers in Leporinus elongatus. Treatments of O. niloticus fry at 36 degrees C applied for 10 days and more, and starting 1 week after fertilization markedly increased the proportion of males, and progeny-testing these males confirmed that some of them are sex-reversed genetic females. Two non-coding sequences of L. elongatus Z and W chromosomes were cloned by genomic subtraction. They cross-hybridized with the genome of a close species without providing sex-specific patterns. A collection of L. elongates individuals was subjected to gonadal and chromosomal sexing, and DNA hybridization with both sequences. These analyses revealed 3 individuals having atypical W chromosomes. Interestingly, 2 of these were males having a ZW karyotype. We assume that these atypical sex chromosome arise by exchanges between Z and W chromosomes, and that a transition between female and male heterogamety is underway in this species.

Territorial hypothesis predicts the trade-off between reproductive opportunities and parental care in three species of damselfishes (Pomacentridae: Actinopterygii)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

ANALISE FAMILIAL DO COMPORTAMENTO IN VITRO DOS MACROFAGOS HUMANOS FRENTE AO MYCOBACTERIUM LEPRAE

The lysogenic capacity of human macrophages facing M. leprae in vitro may be dependent on an important genetic component. Although the familial aggregation of the trait is demonstrated, this is a necessary but not sufficient condition to prove genetic influence. The data do not fit some simple genetic models (autosomal dominant or incompletely dominant gene; dominant or recessive sex-linked gene). The results obtained are consistent with the hypothesis that the macrophages' lysogenic capacity is mainly due to a major gene with variable expressivity. This hypothesis may be too simple to account for the whole variability detected and therefore must be considered a working hypothesis.

Atmospheric neutrino observations and flavor changing interactions

Flavor changing (FC) neutrino-matter interactions can account for the zenith-angle-dependent deficit of atmospheric neutrinos observed in the SuperKamiokande experiment, without directly invoking either neutrino mass or mixing. We find that FC ν μ-matter interactions provide a good fit to the observed zenith angle distributions, comparable in quality to the neutrino oscillation hypothesis. The required FC interactions arise naturally in many attractive extensions of the standard model. © 1999 The American Physical Society.

Marginal fit of nickel-chromium copings before and after internal adjustments with duplicated stone dies and disclosing agent.

STATEMENT OF PROBLEM: Despite careful procedures, master stone dies may be damaged during laboratory procedures. The dentist routinely adjusts castings because the marginal fit of casting is not as accurate as on the dies. PURPOSE: This study evaluated the technique of internal adjustment of castings with use of duplicated stone dies and a disclosing agent to improve marginal fit discrepancy. MATERIAL AND METHODS: Thirty-two nickel-chromium copings were fabricated and simulated standard clinical and laboratory procedures with 2 variables: tooth preparation convergence angles of 6 and 18 degrees, with or without internal relief. Master stone dies and their duplicates were selected for coping construction and internal adjustment, respectively. A specimen positioning device was coupled with a Toolmakers microscope to allow reproducibility of measurements. Each coping was evaluated at 8 locations of its marginal perimeter, before and after internal adjustment. RESULTS: Marginal fit discrepancy of copings were significantly reduced with an internal adjustment technique (mean > 52%) for all experimental groups. Tooth preparations with greater convergence and internally relieved castings recorded a better marginal fit. CONCLUSION: The casting internal adjustment technique with use of duplicated stone dies and a disclosing agent substantially reduced marginal fit discrepancy.

Study of the venom glands in Ectatomma quadridens (Hymenoptera: Formicidae). Evolutionary hypothesis in subfamily ponerinae

The venom glands of worker ants of the species Ectatomma quadridens morphologically resemble an elongated sac or reservoir ending in a narrower portion that has the function of releasing the secretion to the exterior. Two external secretory filaments are individually inserted into the proximal portion of the gland and end inside the convoluted gland. The venom gland of workers of E. quadridens is, therefore, morphologically subdivided into four distinct portions: a) sac-shaped reservoir measuring approximately 1mm in length; b) excretory duct, proximal portion of the reservoir that joins the gland to the sting apparatus; c) convoluted gland, final portion of the external secretory filaments located inside the reservoir; and d) two secretory filaments measuring about 2 mm in length; their free extremities end blindly and are individually inserted into the reservoir wall at the proximal region of the venom gland. The histological data showed that the filaments and the convoluted gland are composed of cubic cells of secretory function. The reservoir consists of a simple cubical epithelium externally surrounded by muscle fibers. A thick cuticle internally coats the epithelium of the reservoir. The application of histochemical tests allowed us to establish that the final secretion of the venom gland of Ectatomma quadridens is of glycoproteic nature. This secretion undergoes several modifications at the secretory filaments, at the convoluted gland, and in the reservoir before reaching the excretory duct, the point at which the secretion is released in its final composition, namely the venom. Based on the differences among various Ponerinae species we propose a hypothesis suggesting a probable evolutionary process that the venom glands of members of this subfamily might have undergone.

Effect of cast rectifiers on the marginal fit of UCLA abutments

Objectives: This study assessed the effect of cast rectifiers on the marginal misfit of cast UCLA abutments compared to premachined UCLA abutments. The influence of casting and porcelain baking on the marginal misfit of these components was also investigated. Methods: Two groups were analyzed: test group - 10 cast UCLA abutments, finished with cast rectifier and submitted to ceramic application; control group - 10 premachined UCLA abutments, cast with noble metal alloy and submitted to ceramic application. Vertical misfit measurements were performed under light microscopy. In the test group, measurements were performed before and after the use of cast rectifiers, and after ceramic application. In the control group, measurements were performed before and after casting, and after ceramic application. Data were submitted to statistical analysis by ANOVA and Tukey's test (α= 5%). Results: The use of cast rectifiers significantly reduced the marginal misfit of cast UCLA abutments (from 25.68μm to 14.83μm; p<0.05). After ceramic application, the rectified cylinders presented misfit values (16.18μm) similar to those of premachined components (14.3 μm). Casting of the premachined UCLA abutments altered the marginal misfit of these components (from 9.63 μm to 14.6 μm; p<0.05). There were no significant changes after porcelain baking, in both groups. Conclusion: The use of cast rectifiers reduced the vertical misfit of cast UCLA abutments. Even with carefully performed laboratory steps, changes at the implant interface of premachined UCLA abutments occurred. Ceramic application did not alter the marginal misfit values of UCLA abutments.

Effect of phosphate-bonded investments on titanium reaction layer and crown fit

This study analyzed the reaction layer and measured the marginal crown fit of cast titanium applied to different phosphate-bonded investments, prepared under the following conditions (liquid concentration/casting temperature): Rema Exakt (RE) - 100%/237°C, 75%/287°C, Castorit Super C (CS)-100%/70°C, 75%/141°C and Rematitan Plus (RP)-100%/430°C (special to titanium cast, as the control group). The reaction layer was studied using the Vickers hardness test, and analyzed by two way ANOVA and Tukey's HSD tests (α = 0.05). Digital photographs were taken of the crowns seated on the die, the misfit was measured using an image analysis system and One-way ANOVA, and Tukey's test was applied (α = 0.05). The hardness decreased from the surface (601.17 VHN) to 150 μm (204.03 VHN). The group CS 75%/141°C presented higher hardness than the other groups, revealing higher surface contamination, but there were no differences among the groups at measurements deeper than 150 μm. The castings made with CS - 100%/70°C presented the lowest levels of marginal misfit, followed by RE -100%/237°C. The conventional investments CS (100%) and RE (100%) showed better marginal fit than RP, but the CS (75%) had higher surface contamination.

Reinforcing and expanding the predictions of the disturbance vicariance hypothesis in Amazonian harlequin frogs: A molecular phylogenetic and climate envelope modelling approach

The disturbance vicariance hypothesis (DV) has been proposed to explain speciation in Amazonia, especially its edge regions, e. g. in eastern Guiana Shield harlequin frogs (Atelopus) which are suggested to have derived from a cool-adapted Andean ancestor. In concordance with DV predictions we studied that (i) these amphibians display a natural distribution gap in central Amazonia; (ii) east of this gap they constitute a monophyletic lineage which is nested within a pre-Andean/western clade; (iii) climate envelopes of Atelopus west and east of the distribution gap show some macroclimatic divergence due to a regional climate envelope shift; (iv) geographic distributions of climate envelopes of western and eastern Atelopus range into central Amazonia but with limited spatial overlap. We tested if presence and apparent absence data points of Atelopus were homogenously distributed with Ripley's K function. A molecular phylogeny (mitochondrial 16S rRNA gene) was reconstructed using Maximum Likelihood and Bayesian Inference to study if Guianan Atelopus constitute a clade nested within a larger genus phylogeny. We focused on climate envelope divergence and geographic distribution by computing climatic envelope models with MaxEnt based on macroscale bioclimatic parameters and testing them by using Schoener's index and modified Hellinger distance. We corroborated existing DV predictions and, for the first time, formulated new DV predictions aiming on species' climate envelope change. Our results suggest that cool-adapted Andean Atelopus ancestors had dispersed into the Amazon basin and further onto the eastern Guiana Shield where, under warm conditions, they were forced to change climate envelopes. © 2010 The Author(s).

Measurement of the top-quark mass in t̄t events with lepton+jets final states in pp collisions at √s =7 TeV

The mass of the top quark is measured using a sample of t̄t candidate events with one electron or muon and at least four jets in the final state, collected by CMS in pp collisions at √s =7 TeV at the LHC. A total of 5174 candidate events is selected from data corresponding to an integrated luminosity of 5.0 fb-1. For each event the mass is reconstructed from a kinematic fit of the decay products to a t̄t hypothesis. The top-quark mass is determined simultaneously with the jet energy scale (JES), constrained by the known mass of the W boson in q̄q decays, to be 173.49 ± 0.43 (stat. + JES) ±0.98 (syst.) GeV. © 2012 CERN for the benefit of the CMS collaboration.

Measurement of the t̄t production cross section in the all-jet final state in pp collisions at √s=7 TeV

A measurement is presented of the t̄t production cross section σt̄t in proton-proton collisions at a centre-of-mass energy of 7 TeV, in the all-jet final state that contains at least six jets, two of which are tagged as originating from b quarks. The data correspond to an integrated luminosity of 3.54 fb-1, collected with the CMS detector at the LHC. The cross section is determined through an unbinned maximum likelihood fit of background and t̄t signal to the reconstructed mass spectrum of t̄t candidates in the data, in which events are subjected to a kinematic fit assuming a t̄t → W+bW-̄b → 6 jets hypothesis. The measurement yields σt̄t = 139±10(stat.)±26(syst.)±3(lum.)pb, a result consistent with those obtained in other t̄t decay channels, as well as with predictions of the standard model. © 2013 CERN for the benefit of the CMS collaboration.

An assessment approach for application of spermatic data in phylogenetic analyses: Within the genus Moenkhausia Eigenmann, 1903 (Characiformes: Characidae)

Spermiogenesis and sperm ultrastructure from 21 species of Moenkhausia and others related genera are described. To evaluate the phylogenetic signals, 18 unordered characters were utilized in implied weighting analysis through the program TNT 1.1. Four variations of spermiogenesis were found. In the earliest spermatids, the nucleus can be positioned lateral, eccentric, strongly eccentric or nearly medial in relation to the distal centriole. The nuclear rotation can be present or absent. These spermiogenesis processes are related or intermediate to Type I and Type III. Taking into account the degrees of nuclear rotation during the spermiogenesis and other characteristics, distinct forms of spermatozoa are observed among the species analyzed. The phylogenetic analysis yielded a single most parsimonious tree with fit value 2.70000 and the topology obtained founds Moenkhausia as non-monophyletic. However, some hypothesis of relationships previously proposed viz the clade 20, which contains the type species Moenkhausia xinguensis, is recovered herein. This clade is supported by five synapomorphies, and it allows the supposition that these species constitute a monophyletic group. The whole topology is presented and discussed. © 2012 The Authors. Acta Zoologica © 2012 The Royal Swedish Academy of Sciences.

Observation of a new boson with mass near 125 GeV in pp collisions at √=7 and 8 TeV

A detailed description is reported of the analysis used by the CMS Collaboration in the search for the standard model Higgs boson in pp collisions at the LHC, which led to the observation of a new boson. The data sample corresponds to integrated luminosities up to 5.1 fb-1 at √=7 TeV, and up to 5.3 fb-1 at √ s=8 TeV. The results for five Higgs boson decay modes γγ, ZZ, WW, ττ, and bb, which show a combined local significance of 5 standard deviations near 125 GeV, are reviewed. A fit to the invariant mass of the two high resolution channels, γγ and ZZ → 4ℓ, gives a mass estimate of 125.3 ± 0.4 (stat.) ± 0.5 (syst.) GeV. The measurements are interpreted in the context of the standard model Lagrangian for the scalar Higgs field interacting with fermions and vector bosons. The measured values of the corresponding couplings are compared to the standard model predictions. The hypothesis of custodial symmetry is tested through the measurement of the ratio of the couplings to the W and Z bosons. All the results are consistent, within their uncertainties, with the expectations for a standard model Higgs boson. [Figure not available: see fulltext.] © 2013 CERN for the benefit of the CMS collaboration.