La technique de l’arc segmenté. Contrôle de l’ancrage et modification significative du profil facial : une étude de cas

This article evaluates space closure mechanics efficiency in an extraction case where maximum anchorage was a requirement. The Segmented Arch Technique (SAT) was utilized as an anchorage control strategy to obtain maximum anterior retraction and, in consequence, significant facial profile change. A 20-year-10-month old woman needed severe labial and profile changes. The patient had four premolars extracted and SAT with type A mechanics [1] (Marcotte [2] activation protocol) was applied. The results showed significant reduction in labial protrusion and incisal angulation with effective anchorage control. The results were compared to others available in the literature derived from different techniques, where anterior retraction was also accomplished with maximum anchorage [3-7]. In conclusion, the SAT with type A mechanics has been shown to be another treatment option when significant changes in the soft-tissue profile are needed in extraction cases. © 2008. CEO. Published by Elsevier Masson SAS. All rights reserved.

Evaluation of dimensional change and detail reproduction in silicones for facial prostheses.

The aim of this study was to evaluate the dimensional stability and detail reproduction of two silicones used for facial prosthesis, under the influence of chemical disinfection and storage time. Twenty-eight test specimens were obtained, half made of Silastic MDX 4-4210 silicone, and the other half of Silastic 732 RTV silicone. The test specimens were divided into 4 groups: Silastic 732 RTV and Silastic MDX 4-4210, with disinfection 3 times a week with Efferdent and without disinfection. Dimensional change was analyzed using an electronic comparison microscope and detail reproduction was observed under a stereo microscope, immediately and 2 months after the test specimens were made. Once the results were obtained, an analisis of variance (ANOVA) was applied, followed by the Tukey's Test with 1% confidence. The storage time factor had a statistical influence on dimensional stability: Silastic MDX 4-4210 had less contraction than Silastic 732 RTV. Chemical disinfection did not significantly alter the dimensional stability of the materials used. Regarding detail reproduction, no alteration of values was observed in any of the materials analyzed, regardless of storage period or disinfection.

Visual evaluation of color stability after accelerated aging of pigmented and nonpigmented silicones to be used in facial prostheses

Objectives: The objective of this study was to evaluate by a visual method of comparison the color stability of nonpigmented and pigmented facial silicones after accelerated aging. Materials and Methods: Two kinds of silicones were used in this study; one specifically formulated for facial prostheses and the other an acetic silicone for industrial use. Twenty-four trial bodies were made for each silicone. These were divided into colorless and intrinsically pigmented groups: ceramic, make-up, and iron oxide. The groups were submitted to accelerated aging for nonmetallic materials. An initial reading and subsequent readings were made at 163, 351, 692, and 1000 hours using a visual method of comparison. The values were annotated in a spreadsheet by two observers, according to scores elaborated for this study. Results: All groups presented color stability in the visual method. According to the results obtained and analyzed in this study, we can conclude that both silicones, Silastic 732 RTV and Silastic MDX 4-4210, behaved similarly, they can therefore be indicated for use in maxillofacial prosthesis. The time factor of aging influenced negatively, independently of the pigmentation, or lack of it, and of silicones and no group had visually noticeable alterations in any of the accelerated aging time, independently of the addition or not of pigments.

Autologous orbicularis muscle for filling facial foldsan experimental and clinical study

Purpose: To present a technique for filling facial folds by using autologous orbicularis oculi muscle, based on an experimental model. Methods: two studies are presented: (1) an experimental study using 15 albino guinea-pigs from which a strip of the sural triceps muscle was removed and implanted in the subcutaneous tissue of the dorsal area. The animals were sacrificed 7, 30 and 60 days after the implantation, and the material was histologically evaluated. And (2%) an interventional prospective clinical trial carried out on 20 patients referred to blepharoplasty surgery. They received autologous preseptal orbicularis muscle for filling facial folds. The results where evaluated by patients satisfaction and clinical exam. Results: the sural tricep muscle, when implanted in the subcutaneous tissue, resulted in fibrosis. The patients whom received autologous orbicularis muscle implanted for filling facial folds showed that the procedure can be successfully carried out. Conclusions: autologous preseptal orbicularis muscle is a good material for filling facial folds. Cicatricial tissue will be formed on its implantation site, filling the tissue gap that forms the folds on the skin.

Neurorrafia do ramo bucal dorsal do nervo facial em coelhos com proteção de segmento intestinal alógeno

18 rabbits, New Zealand, males, adults were used for clinical and histological evaluation of repair dorsal buccal branch of facial nerve after 15, 30 and 60 days postoperatively (PO). The animals were divided into two groups for transection and 10-0 nylon monofilament epineural suture of buccal branch. In animals in Group I, the nerve was coated with protection of jejunum allograft preserved in glycerin 98% and in group II was applied epineural suture. Both groups occurred the return of movement of the upper lip from the eighth week. There was infiltrated cellular and giant cells with fibrosis unsystematic and collagen fibers of the allograft jejunum joing to the connective tissue. At 15 and 30 days of PO, the distal nerve stumps of both groups were found with degeneration wallerian and in 60 days, regenerated fibers. The repair of the dorsal buccal branch of facial nerve with the allograft wasn't significantly different between the control rabbits as to the assessment of histological and functional recovery.

Color stability after accelerated aging of two silicones, pigmented or not, for use in facial prostheses

One of the greatest challenges faced by buccomaxillofacial prosthetists is to reproduce the patient's exact skin color and provide adequate esthetics. To reach this objective, professionals must use materials with easy characterization and that maintain color over long periods of time. The objective of this study was, thus, to evaluate the color stability of two types of silicones, Silastic 732 and Silastic MDX4-4210. Twenty-four test specimens were made from each type of silicone and were divided into a colorless group and groups intrinsically pigmented with ceramics, cosmetics or iron oxide. The specimens were submitted to an accelerated system of aging for non-metallic materials. Readings were carried out initially and after periods corresponding to 163, 351, 692 and 1,000 hours of aging, using a reflection spectrophotometer analysis, and color alterations were calculated by the CIE L*a*b* system. The data were submitted to variance analysis and Tukey's test at a 5% level of probability. The results demonstrated that, irrespective of the period of time analyzed, all the materials underwent some type of chromatic alteration (ΔE > 0). The test specimens made with Silastic 732 and MDX4-4210, without pigmentation, presented the lowest color alteration values after 1,000 hours of aging. Of the pigments, ceramic presented the lowest color alteration values and cosmetic powder presented the highest values. Thus, it may be concluded that the materials without the incorporation of pigments presented similar color alteration values, and did not differ statistically. The cosmetic powder used in this study was the pigment that most altered the color of the test specimens. © 2009 Sociedade Brasileira de Pesquisa Odontológica.

Assistência Odontológica em Crianças com Paralisia Cerebral e Perspectivas Tecnológicas de Reabilitação

The improvement of oral health and quality of life is closely related to transdisciplinary dialogue, technological development and social responsibility. In patients with cerebral palsy, the lesion of motor areas of the brain compromises the development and function of the craniofacial complex. Considering all the ethiopathogenic conditions, the treatment of such patients involves great difficulties. The dentist and other professionals related to their rehabilitation need to deal with difficulty in chewing, respiration, phonation, besides the poor oral hygiene resulted from abnormal involuntary movements of facial and masticatory musculature, tongue, and upper limb. It is also relevant the lack of understanding about the importance of oral health care due to mental deficits of these individuals. This study aims to review some aspects of oral health in patients with cerebral palsy proposing rehabilitation associated to technology. Few studies concerned about the effectiveness of therapies for oral rehabilitation in patients with cerebral palsy. Laser therapy, electromyography, electrostimulation and LED therapy should be analyzed as options for treatment of patients with cerebral palsy. Following research projects should focus more attention on the dynamic and oral function of these patients to achieve positive repercussions in their overall health. © ArquiMed, 2010.

Avaliação dos contatos oclusais em próteses provisórias unitárias implantossuportadas confeccionadas com e sem arco facial

To assess the number of occlusal contacts achieved in temporal prostheses mounted in a semi-adjusted articulator using the facial arch and the Camper plane. Ten patients treated in a private clinic were selected to be rehabilitated with prostheses in previously placed single implants. For each patient two temporal prostheses were designed obtained under different conditions: (1) model mounting using facial arch and (2) Camper plane mounting. Prostheses were made and adjusted in the laboratory and placed only by an operator. The occlusal contacts achieved in each condition were photographed being assessed and quantified by a second professional not involved with the mounting conditions. Results obtained were analyzed by Mann-Whitney test with a 5 % significance level. There was not a statistically difference between the number of occlusal contacts when prostheses were made with facial arch or Camper plane (p= 0.113). The temporal dental prosthesis confection for single implants, semi-adjusted articulator using the Camper plane, not differ very much from the facial arch use, according to the number of resulting occlusal contacts.

The influence of the flexibility of the chair seat on pressure peak and distribution of the contact area in individuals with cerebral palsy during the execution of a task

This study aimed to determine the influence of flexibility of the chair seat surface on the pressure peak and on the contact area during the execution of a task of handling an object on the seated position by individuals with spastic cerebral palsy. Ten individuals of both genders with diagnosis of spastic cerebral palsy, who had some control to voluntarily move the body and the upper limbs, participated in this study. Quantification of data was carried out in two experimental situations: (1) execution of a task of fitting with upper limbs, and with the individual placed on an adapted canvas seat; (2) execution of a task of fitting with the participant positioned on an adapted wooden seat. Data obtained were submitted to a non-parametric and descriptive statistical analysis using the Wilcoxon test. Results indicated that the use of canvas seat increased the contact area and decreased the pressure peak and the medio-lateral displacement of centre pressure on the seated posture. © 2011 Informa UK, Ltd.

Changes in facial morphology after adenotonsillectomy in mouth-breathing children

Background. Morphological and dentofacial alterations have been attributed to impaired respiratory function. Objective. To examine the influence of mouth breathing (MB) on children facial morphology before and after adenoidectomy or adenotonsillectomy. Methods. Thirty-three MB children who restored nasal breathing (NB) after surgery and 22 NB children were evaluated. Both groups were submitted to lateral cephalometry, at time 1 (T1) before and at time 2 (T2) 28months on average postoperatively. Results. Comparison between the MB and NB groups at T1 showed that mouth breathers had higher inclination of the mandibular plane; more obtuse gonial angle; dolichofacial morphology; and a decrease in the total and inferior posterior facial heights. Twenty-eight months after the MB surgical intervention, they still presented a dolichofacial morphologic pattern. During this period, MB altered the face growth direction and decreased their mandible plane inclination, with reduction in the SN.GoGn, PP.MP, SNGn, and ArGo.GoMe parameters as well as an increase in BaN.PtGn. Conclusion. After the MB rehabilitation, children between 3 and 6years old presented significant normalization in the mandibular growth direction, a decrease in the mandible inclination, and an increase in the posterior facial height. Instead, they still persisted with a dolichofacial pattern when compared with nasal breathers. © 2011 The Authors. International Journal of Paediatric Dentistry © 2011 BSPD, IAPD and Blackwell Publishing Ltd.

Trochlear nerve palsy associated with claude bernard-horner syndrome after brainstem stroke

The association of unilateral trochlear nerve palsy with Claude Bernard-Horner syndrome represents a rare clinical condition. We present the case of a patient with this unusual presentation. The investigation performed implicated cerebrovascular disease as the underlying cause of the condition in this patient. © 2011 S. Karger AG, Basel.

Effect of disinfection and accelerated ageing on dimensional stability and detail reproduction of a facial silicone with nanoparticles

The aim of the present study was to evaluate the effect of disinfection and accelerated ageing on the dimensional stability and detail reproduction of a facial silicone with different types of nanoparticle. A total of 60 specimens were fabricated with Silastic MDX 4-4210 silicone and they were divided into three groups: colourless and pigmented with nanoparticles (make-up powder and ceramic powder). Half of the specimens of each group were disinfected with Efferdent tablets and half with neutral soap for 60 days. Afterwards, all specimens were subjected to accelerated ageing. Both dimensional stability and detail reproduction tests were performed after specimen fabrication (initial period), after chemical disinfection, and after accelerated ageing periods (252, 504 and 1008 hours). The dimensional stability test was conducted using AutoCAD software, while detail reproduction was analysed using a stereoscope magnifying glass. Dimensional stability values were statistically evaluated by analysis of variance (ANOVA) followed by Tukey's test (p < 0.01). Detail reproduction results were compared using a score. Chemical disinfection and also accelerated ageing affected the dimensional stability of the facial silicone with statistically significant results. The silicone's detail reproduction was not affected by these two factors regardless of nanoparticle type, disinfection and accelerated ageing. © 2012 Informa UK, Ltd.

Influence of natural weathering on colour stability of materials used for facial prosthesis

Colour stability of resin and silicone is an important factor for longevity of facial prostheses. The aim of this study was to evaluate the colour stability of resins and silicone for facial prostheses. Three brands of acrylic resin and one of facial silicone were evaluated considering pigment incorporation for the colourless materials. Ten samples of each material were fabricated and submitted to measurements of chromatic alteration initially and after 90 and 180 days of weathering natural through visual analysis and spectrophotometry. Data were evaluated by ANOVA and Tukey test (p < 0.05). Statistically significant colour alteration was observed among some materials regardless of the period. The materials did not present a statistical difference between 90 and 180 days except for the pigmented heat-polymerized resin. The colour difference between pigmented Silastic MDX4-4210 and colourless Silastic was statistically significant (p < 0.01) in both periods as well as between pigmented and colourless heat-polymerized resin, and between the resins Rapidaflex and Lentaflex. The visual method demonstrated colour alteration in all materials evaluated during the first 90 days of ageing. All materials exhibited colour alteration due to exposure to environment. © 2012 Informa UK, Ltd.

Functional capacity and assistance from the caregiver during daily activities in Brazilian children with cerebral palsy

Background: Cerebral Palsy (CP) presents changes in posture and movement as a core characteristic, which requires multiprofessional clinical treatments during childrens habilitation or rehabilitation. Besides clinical treatment, it is fundamental that professionals use evaluation systems to quantify the difficulties presented to the individual and their families in their daily lives. We aimed to investigate the functional capacity of individuals with CP and the amount of assistance required by the caregiver in day-to-day activities. Methods. Twenty patients with CP, six-year-old on average, were evaluated. The Pediatric Evaluation Inventory of Incapacities was used (PEDI - Pediatric Evaluation Disability Inventory), a system adapted for Brazil that evaluates child's dysfunction in three 3 dimensions: self-care, mobility and social function. To compare the three areas, repeated measures analysis of variance (ANOVA) were used. Results: We found the following results regarding the functional capacity of children: self-care, 27.4%, ±17.5; mobility, 25.8%, ±33.3 and social function, 36.3%, ±27.7. The results of the demand of aid from the caregiver according to each dimension were: self-care, 9.7%, ±19.9; mobility, 14.1%, ± 20.9 and social function, 19.8%, ±26.1. Conclusion: We indicated that there was no difference between the performance of the subjects in areas of self-care, mobility and social function considering the functional skills and assistance required by the caregiver. © 2013 Monteiro et al; licensee BioMed Central Ltd.

Clinical patterns and epidemiological characteristics of facial melasma in Brazilian women

Background Melasma is a common acquired chronic hypermelanosis of sun-exposed areas which significantly impacts quality of life. There are few epidemiological studies in medical literature concerning these patients. Objective Characterize clinical and epidemiological data on Brazilian female patients with melasma. Methods A semi-structured questionnaire was administered to melasma patients treated at a dermatology clinic between 2005 and 2010. Association between variables was performed by multivariate regression models. Results We assessed 302 patients; intermediate skin phototypes III (34.4%) and IV (38.4%) were prevalent. Mean disease onset age was 27.5 ± 7.8 years and familiar occurrence of melasma was identified in 56.3%. The most commonly reported trigger factors were pregnancy (36.4%), contraceptive pills (16.2%) and intense sun exposure (27.2%). Preferred facial topographies were zygomatic (83.8%), labial superior (51.3%) and frontal (49.7%). Pregnancy induced melasma has been associated to early disease (OR = 0.86) and number of pregnancies (OR = 1.39). Childbearing was correlated to melasma extension. Older disease onset age was associated to darker skin phototypes. Co-occurrence of facial topographies supported clinical classification as centrofacial and peripheral melasma. Conclusion This population was characterized by: a high prevalence in adult females, intermediate skin phototypes, disease precipitation by hormonal stimulus and familiar genetic influence. © 2012 The Authors. Journal of the European Academy of Dermatology and Venereology © 2012 European Academy of Dermatology and Venereology.