Treatment of Nuclear-Donor Cells or Cloned Zygotes with Chromatin-Modifying Agents Increases Histone Acetylation But Does Not Improve Full-Term Development of Cloned Cattle

Although somatic cell nuclear transfer (SCNT) is a promising tool, its potential use is hampered by the high mortality rates during the development to term of cloned offspring. Abnormal epigenetic reprogramming of donor nuclei after SCNT is thought to be the main cause of this low efficiency. We hypothesized that chromatin-modifying agents (CMAs) targeting chromatin acetylation and DNA methylation could alter the chromatin configuration and turn them more amenable to reprogramming. Thus, bovine fibroblasts were treated with 5-aza-2'-deoxycytidine (AZA) plus trichostatin (TSA) or hydralazine (HH) plus valproic acid (VPA) whereas, in another trial, cloned bovine zygotes were treated with TSA. The treatment of fibroblasts with either AZA + TSA or HH + VPA increased histone acetylation, but did not affect the level of DNA methylation. However, treatment with HH + VPA decreased cellular viability and proliferation. The use of these cells as nuclear donors showed no positive effect on pre- and postimplantation development. Regarding the treatment of cloned zygotes with TSA, treated one-cell embryos showed an increase in the acetylation patterns, but not in the level of DNA methylation. Moreover, this treatment revealed no positive effect on pre- and postimplantation development. This work provides evidence the treatment of either nuclear donor cells or cloned zygotes with CMAs has no positive effect on pre- and postimplantation development of cloned cattle.

New Isomers in the Full Seniority Scheme of Neutron-Rich Lead Isotopes: The Role of Effective Three-Body Forces

The neutron-rich lead isotopes, up to Pb-216, have been studied for the first time, exploiting the fragmentation of a primary uranium beam at the FRS-RISING setup at GSI. The observed isomeric states exhibit electromagnetic transition strengths which deviate from state-of-the-art shell-model calculations. It is shown that their complete description demands the introduction of effective three-body interactions and two-body transition operators in the conventional neutron valence space beyond Pb-208.

The full Fisher matrix for galaxy surveys

Starting from the Fisher matrix for counts in cells, we derive the full Fisher matrix for surveys of multiple tracers of large-scale structure. The key step is the classical approximation, which allows us to write the inverse of the covariance of the galaxy counts in terms of the naive matrix inverse of the covariance in a mixed position-space and Fourier-space basis. We then compute the Fisher matrix for the power spectrum in bins of the 3D wavenumber , the Fisher matrix for functions of position (or redshift z) such as the linear bias of the tracers and/or the growth function and the cross-terms of the Fisher matrix that expresses the correlations between estimations of the power spectrum and estimations of the bias. When the bias and growth function are fully specified, and the Fourier-space bins are large enough that the covariance between them can be neglected, the Fisher matrix for the power spectrum reduces to the widely used result that was first derived by Feldman, Kaiser & Peacock. Assuming isotropy, a fully analytical calculation of the Fisher matrix in the classical approximation can be performed in the case of a constant-density, volume-limited survey.

Effects of Working Full-Time and Studying in the Evening Hours Among Young Apprentices and Trainees

Objective: This research aims to assess apprentices' and trainees' work conditions, psychosocial factors at work, as well as health symptoms after joining the labor force. Background: Despite the fact that there are over 3.5 million young working students in Brazil, this increasing rate brings with it difficult working conditions such as work pressure, heavy workloads, and lack of safety training. Method: This study was carried out in a nongovernmental organization (NGO) with 40 young members of a first job program in the city of Sao Paulo, Brazil. They filled out a comprehensive questionnaire focused on sociodemographic variables, working conditions, and health symptoms. Individual and collective semi-structured interviews were conducted. Empirical data analysis was performed using analysis of content. Results: The majority of participants mentioned difficulties in dealing with the pressure and their share of responsibilities at work. Body pains, headaches, sleep deprivation during the workweek, and frequent colds were mentioned. Lack of appropriate task and safety training contributed to the occurrence of work injuries. Conclusion: Having a full-time job during the day coupled with evening high school attendance may jeopardize these people's health and future. Application: This study can make a contribution to the revision and implementation of work training programs for adolescents. It can also help in the creation of more sensible policies regarding youth employment.

Niobium Effects on the Recrystallization Behavior on a Full Austenitic 15Cr-15Ni Stainless Steel Investigated Using Adaptive Neural Networks (ANN)

A new series of austenitic stainless steels-Nb stabilized, without Mo additions, non-susceptible to delta ferrite formation and devoid of intemetallic phases (sigma and chi), without deformation induced martensite is being developed, aiming at high temperature applications as well as for corrosive environments. The base steel composition is a 15Cr-15Ni with normal additions of Nb of 0.5, 1.0 and 2 wt%. Mechanical properties, oxidation and corrosion resistance already have been invetigated in previous papers. In this paper, the effects of Nb on the SFE, strain hardening and recrystallization resistance are evaluated with the help of Adaptive Neural Networks (ANN).

A familial case with interstitial 2q36 deletion: Variable phenotypic expression in full and mosaic state

Submicroscopic chromosomal anomalies play an important role in the etiology of craniofacial malformations, including midline facial defects with hypertelorism (MFDH). MFDH is a common feature combination in several conditions, of which Frontonasal Dysplasia is the most frequently encountered manifestation; in most cases the etiology remains unknown. We identified a parent to child transmission of a 6.2 Mb interstitial deletion of chromosome region 2q36.1q36.3 by array-CGH and confirmed by FISH and microsatellite analysis. The patient and her mother both presented an MFDH phenotype although the phenotype in the mother was much milder than her daughter. Inspection of haplotype segregation within the family of 2q36.1 region suggests that the deletion arose on a chromosome derived from the maternal grandfather. Evidences based on FISH, microsatellite and array-CGH analysis point to a high frequency mosaicism for presence of a deleted region 2q36 occurring in blood of the mother. The frequency of mosaicism in other tissues could not be determined. We here suggest that the milder phenotype observed in the proband's mother can be explained by the mosaic state of the deletion. This most likely arose by an early embryonic deletion in the maternal embryo resulting in both gonadal and somatic mosaicism of two cell lines, with and without the deleted chromosome. The occurrence of gonadal mosaicism increases the recurrence risk significantly and is often either underestimated or not even taken into account in genetic counseling where new mutation is suspected. (C) 2012 Elsevier Masson SAS. All rights reserved.

Differences in walking attainment ages between low-risk preterm and healthy full-term infants

Objective: To compare gross motor development of preterm infants (PT) without cerebral palsy with healthy full-term (FT) infants, according to Alberta Infant Motor Scale (AIMS); to compare the age of walking between PT and FT; and whether the age of walking in PT is affected by neonatal variables. Methods: Prospective study compared monthly 101 PT and 52 FT, from the first visit, until all AIMS items had been observed. Results: Mean scores were similarity in their progression, except from the eighth to tenth months. FT infants were faster in walking attainment than PT. Birth weight and length and duration of neonatal nursery stay were related to walking delay. Conclusion: Gross motor development between PT and FT were similar, except from the eighth to tenth months of age. PT walked later than FT infants and predictive variables were birth weight and length, and duration of neonatal intensive unit stay.

Electrophysiological study of hearing in full-term small-for-gestational-age newborns

PURPOSE: To describe the Brainstem Auditory Evoked Potential (BAEP) results of full-term small-for-gestational-age newborns, comparing them to the results of full-term appropriate-for-gestational-age newborns, in order to verify whether the small-for-gestational-age condition is a risk indicator for retrocochlear hearing impairment. METHODS: This multicentric prospective cross-sectional study assessed 86 full-term newborns - 47 small- (Study Group) and 39 appropriate-for-gestational-age (Control Group - of both genders, with ages between 2 and 12 days. Newborns with presence of transient evoked otoacoustic emissions and type A tympanometry were included in the study. Quantitative analysis was based on the mean and standard deviation of the absolute latencies of waves I, III and V and interpeak intervals I-III, III-V and I-V, for each group. For qualitative analysis, the BAEP results were classified as normal or altered by analyzing these data considering the age range of the newborn at the time of testing. RESULTS: In the Study Group, nine of the 18 (38%) subjects with altered BAEP results had the condition of small-for-gestational-age as the only risk factor for hearing impairments. In the Control Group, seven (18%) had altered results. Female subjects from the Study Group tended to present more central alterations. In the Control Group, the male group tended to have more alterations. CONCLUSION: Full-term children born small or appropriate for gestational age might present transitory or permanent central hearing impairments, regardless of the presence of risk indicators.

A model and an algebra for semi-structured and full-text queries

The need for a convergence between semi-structured data management and Information Retrieval techniques is manifest to the scientific community. In order to fulfil this growing request, W3C has recently proposed XQuery Full Text, an IR-oriented extension of XQuery. However, the issue of query optimization requires the study of important properties like query equivalence and containment; to this aim, a formal representation of document and queries is needed. The goal of this thesis is to establish such formal background. We define a data model for XML documents and propose an algebra able to represent most of XQuery Full-Text expressions. We show how an XQuery Full-Text expression can be translated into an algebraic expression and how an algebraic expression can be optimized.

Spectral-Element and Adjoint 3D Full-Wave Tomography for the Lithosphere of Central Italy

The primary objective of this thesis is to obtain a better understanding of the 3D velocity structure of the lithosphere in central Italy. To this end, I adopted the Spectral-Element Method to perform accurate numerical simulations of the complex wavefields generated by the 2009 Mw 6.3 L’Aquila event and by its foreshocks and aftershocks together with some additional events within our target region. For the mainshock, the source was represented by a finite fault and different models for central Italy, both 1D and 3D, were tested. Surface topography, attenuation and Moho discontinuity were also accounted for. Three-component synthetic waveforms were compared to the corresponding recorded data. The results of these analyses show that 3D models, including all the known structural heterogeneities in the region, are essential to accurately reproduce waveform propagation. They allow to capture features of the seismograms, mainly related to topography or to low wavespeed areas, and, combined with a finite fault model, result into a favorable match between data and synthetics for frequencies up to ~0.5 Hz. We also obtained peak ground velocity maps, that provide valuable information for seismic hazard assessment. The remaining differences between data and synthetics led us to take advantage of SEM combined with an adjoint method to iteratively improve the available 3D structure model for central Italy. A total of 63 events and 52 stations in the region were considered. We performed five iterations of the tomographic inversion, by calculating the misfit function gradient - necessary for the model update - from adjoint sensitivity kernels, constructed using only two simulations for each event. Our last updated model features a reduced traveltime misfit function and improved agreement between data and synthetics, although further iterations, as well as refined source solutions, are necessary to obtain a new reference 3D model for central Italy tomography.

Modellazione di processo in impianti di depurazione urbana finalizzata allo sviluppo di linee guida progettuali. Simulazioni e confronti su dati HERA full - scale.

Gli impianti di depurazione rappresentano, nei contesti urbani, elementi di imprescindibile importanza nell’ambito di una corretta gestione e tutela della risorsa idrica e dell’ambiente. Il crescente grado di antropizzazione delle aree urbanizzate e parallelamente le sempre minori disponibilità in termini di spazi utilizzabili a fini depurativi comportano sempre di più la necessità di ottimizzare i processi di dimensionamento degli impianti. Inoltre, l’obiettivo di aumentare l’efficienza del ciclo depurativo andando a minimizzare i costi correlati alla gestione degli stessi indirizza verso una omogeneizzazione nei criteri di dimensionamento adottati. In questo senso, la normativa tecnica di settore risulta carente, andandosi a concentrare prevalentemente sul rispetto di fissati standard ambientali senza però fornire indicazioni precise sui criteri di progettazione da adottare per perseguire tali standard. La letteratura scientifica pur indicando range di possibili valori di riferimento da adottare, nel dimensionamento degli impianti, lascia un ampio margine di discrezionalità al progettista. La presente tesi si pone pertanto, a partire da tali valori di letteratura, di andare a definire da un lato le caratteristiche quali-quantitative del refluo in ingresso e dall’altro i valori di riferimento da adottare in sede di progettazione per perseguire gli obiettivi precedentemente indicati. La prima parte, di valenza generale, oltre alla caratterizzazione dell’influente descrive nel dettaglio le diverse fasi del processo e il loro dimensionamento che in tutte le sezioni, ad eccezione del biologico, viene effettuato attraverso equazioni semplificate mettendo a confronto e analizzando i parametri progettuali proposti da letteratura. Per quanto riguarda il comparto biologico la maggior complessità del fenomeno da descrivere rende difficile la valutazione delle grandezze che caratterizzano il funzionamento mediante l’utilizzo di equazioni semplificate. Per questo si è deciso di modellare questo comparto, unito a quello della sedimentazione, attraverso un software (WEST) che permette non solo di simulare il processo ma anche, attraverso le analisi di scenario, di determinare quelli che sono i valori progettuali puntuali che consentono di ottenere da un lato una minimizzazione dei costi dell’impianto, sia costruttivi che gestionali, e dall’altro la massimizzazione delle rese depurative. Nello specifico si è fatto riferimento ad impianto fanghi attivi a schema semplificato con potenzialità fissata pari a 10000 AE. Il confronto con i dati di esercizio di alcuni impianti di analoga tipologia ha evidenziato che una buona capacità dello strumento di modellazione utilizzato di descrivere i processi. E’ possibile quindi concludere che tali strumenti, affiancati ad una lettura critica dei risultati ottenuti possono essere ottimi strumenti di supporto sia in fase di progettazione che in prospettiva di gestione dell’impianto al fine di ottimizzare i processi e quindi i costi.