Superprodução, purificação e caracterização parcial de complexos proteína-polissacáridos inovadores a partir de estirpes de basidiomicetos

O presente trabalho teve como objectivo o estudo de meios de cultura, tendo em vista a superprodução de complexos proteína-polissacáridos, intracelulares e extracelulares, a partir dos basidiomicetos Pleurotus ostreatus e Lentinula edodes. O meio de cultura suplementado com soro de leite apresentou diversas vantagens para a obtenção dessas macromoléculas biológicas, face aos restantes meios analisados, pelo que foi seleccionado para a produção em fermentador de laboratório em regime descontínuo. O crescimento da cultura foi efectuado a 28°C, 200 rpm e durante 10 dias, e as produtividades de complexos proteína-polissacáridos obtidas para o Pleurotus ostreatus foram de 0,008 ± 8,12 x 10-5 g/(L.dia) e de 0,324 ± 0,005 g/(L.dia), para os complexos precipitados a partir da biomassa e do caldo de fermentação, respectivamente. Posteriormente, os complexos intracelulares e extracelulares foram purificados por cromatografia de filtração em gel e parcialmente caracterizados, revelando concentrações de polissacáridos superiores à concentração proteica, pseudo-actividade de superóxido dismutase, e valores de Mr entre 64 e 9 000kDa. As amostras de complexos proteína-polissacáridos foram caracterizadas por HPLC e apresentaram picos de UV e IR com tempos de retenção de aproximadamente 6 e 12 minutos, respectivamente. Após hidrólise ácida, os complexos heteropolissacáridos obtidos apresentaram na sua constituição glucose, ramnose e arabinose. Adicionalmente, a análise dos complexos proteína-polissacáridos por FT-IR revelou bandas de absorção características destas macromoleculas biológicas, designadamente, a 846,5; 1032,3; 1186,4; 1471,0; 1648,8; 2739,6 e 3419,3 cm-1 para o Pleurotus ostreatus e 862,3; 1044,1; 1474,9; 1644,8; 2372,0; 2992,5; e 3415,4 cm-1 para Lentinula edodes.

Incorporation of niobium in SAPO-11 materials: Synthesis and characterization

The present work concerns a new synthesis approach to prepare niobium based SAPO materials with AEL structure and the characterization ofNb species incorporated within the inorganic matrixes. The SAPO-11 materials were synthesized with or without the help of a small amine, methylamine (MA) as co-template, while Nb was added directly during the preparation of the initial gel. Structural, textural and acidic properties of the different supports were evaluated by XRD, TPR, UV-Vis spectroscopy, pyridine adsorption followed by IR spectroscopy and thermal analyses. Pure and well crystalline Nb based SAPO-11 materials were obtained, either with or without MA, using in the initial gel a low Si content of about 0.6. Increasing the Si content of the gel up to 0.9 led to an important decrease of the samples crystallinity. Niobium was found to incorporate the AEL pores support as small Nb2O5 oxide particles and also as extra framework cationic species (Nb5+), compensating the negative charges from the matrix and generating new Lewis acid sites. (C) 2011 Elsevier Inc. All rights reserved.

Efficient cyclohexane oxidation with hydrogen peroxide catalysed by a C-scorpionate iron(II) complex immobilized on desilicated MOR zeolite

The hydrotris(pyrazol-1-yl)methane iron(II) complex [FeCl2{eta(3)-HC(pz)(3)}] (Fe, pz = pyrazol-1-yl) immobilized on commercial (MOR) or desilicated (MOR-D) zeolite, catalyses the oxidation of cyclohexane with hydrogen peroxide to cyclohexanol and cyclohexanone, under mild conditions. MOR-D/Fe (desilicated zeolite supported [FeCl2{eta(3)-HC(pz)(3)}] complex) provides an outstanding catalytic activity (TON up to 2.90 x 10(3)) with the concomitant overall yield of 38%, and can be easy recovered and reused. The MOR or MOR-D supported hydrotris(pyrazol-1-yl)methane iron(II) complex (MOR/Fe and MOR-D/Fe, respectively) was characterized by X-ray powder diffraction, ICP-AES, and TEM studies as well as by IR spectroscopy and N-2 adsorption at -196 degrees C. The catalytic operational conditions (e.g., reaction time, type and amount of oxidant, presence of acid and type of solvent) were optimized. (C) 2013 Elsevier B.V. All rights reserved.

Synthesis, structural characterization and leishmanicidal activity evaluation of ferrocenyl N-heterocyclic compounds

Agência Financiadora: FCT - PTDC/QUI/72656/2006 ; SFRH/BPD/27454/2006; SFRH/BPD/44082/2008; SFRH/BPD/41138/2007

Effects of oxidante acid treatments on carbon-templated hierarchical SAPO-11 materials: synthesis, characterization and catalytic evaluation in n-decane hydroiosomerization

Hierarchical SAPO-11 was synthesized using a commercial Merck carbon as template. Oxidant acid treatments were performed on the carbon matrix in order to investigate its influence on the properties of SAPO-11. Structural, textural and acidic properties of the different materials were evaluated by XRD, SEM, N-2 adsorption, pyridine adsorption followed by IR spectroscopy and thermal analyses. The catalytic behavior of the materials (with 0.5 wt.% Pt, introduced by mechanic mixture with Pt/Al2O3), were studied in the hydroisomerization of n-decane. The hierarchical samples showed higher yields in monobranched isomers than typical microporous SAPO-11, as a direct consequence of the modification on both porosity and acidity, the later one being the most predominant. (C) 2014 Elsevier B.V. All rights reserved.

Y Trinuclear Cu-II structural isomers coordination, magnetism, electrochemistry and catalytic activity towards the oxidation of alkanes

The reaction of the Schiff base (3,5-di-tert-butyl-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H3L) with copper(II) nitrate, acetate or metaborate has led to the isomeric complexes [Cu-3(L)(2)(MeOH)(4)] (1), [Cu-3(L)(2)(MeOH)(2)]2MeOH (2) and [Cu-3(L)(2)(MeOH)(4)] (3), respectively, in which the ligand L exhibits dianionic (HL2-, in 1) or trianionic (L3-, in 2 and 3) pentadentate 1O,O,N:2N,O chelation modes. Complexes 1-3 were characterized by elemental analysis, IR spectroscopy, single-crystal X-ray crystallography, electrochemical methods and variable-temperature magnetic susceptibility measurements, which indicated that the intratrimer antiferromagnetic coupling is strong in the three complexes and that there exists very weak ferromagnetic intermolecular interactions in 1 but weak antiferromagnetic intermolecular interactions in both 2 and 3. Electrochemical experiments showed that in complexes 1-3 the Cu-II ions can be reduced, in distinct steps, to Cu-I and Cu-0. All the complexes act as efficient catalyst precursors under mild conditions for the peroxidative oxidation of cyclohexane to cyclohexyl hydroperoxide, cyclohexanol and cyclohexanone, leading to overall yields (based on the alkane) of up to 31% (TON = 1.55x10(3)) after 6 h in the presence of pyrazinecarboxylic acid.

Caracterização e identificação do pigmento verdigris em documentos históricos - contribuição para o estudo da degradação

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Conservação e Restauro Área de Documentos Gráficos

Mn-II and Cu-II complexes with arylhydrazones of active methylene compounds as effective heterogeneous catalysts for solvent- and additive-free microwave-assisted peroxidative oxidation of alcohols

A one-pot template reaction of sodium 2-(2-(dicyanomethylene) hydrazinyl) benzenesulfonate (NaHL1) with water and manganese(II) acetate tetrahydrate led to the mononuclear complex [Mn(H2O)(6)](HL1a)(2)center dot 4H(2)O (1), where (HL1a) -= 2-(SO3-)C6H4(NH)=N=C(C N) (CONH2) is the carboxamide species derived from nucleophilic attack of water on a cyano group of (HL1) . The copper tetramer [Cu-4(H2O)(10)(-) (1 kappa N: kappa O-2: kappa O, 2 kappa N: k(O)-L-2)(2)]center dot 2H(2)O (2) was obtained from reaction of Cu(NO3)(2)center dot 2.5H(2)O with sodium 5-(2( 4,4-dimethyl-2,6-dioxocyclohexylidene) hydrazinyl)-4-hydroxybenzene-1,3-disulfonate (Na2H2L2). Both complexes were characterized by elemental analysis, IR spectroscopy, ESI-MS and single crystal X-ray diffraction. They exhibit a high catalytic activity for the solvent-and additive-free microwave (MW) assisted oxidation of primary and secondary alcohols with tert-butylhydroperoxide, leading to yields of the oxidized products up to 85.5% and TOFs up to 1.90 x 103 h(-1) after 1 h under low power (5-10 W) MW irradiation. Moreover, the heterogeneous catalysts are easily recovered and reused, at least for three consecutive cycles, maintaining 89% of the initial activity and a high selectivity.

Hidrogenação de óleo vegetal de colza para a produção de biocombustível líquido

Dissertação apresentada à Universidade Nova de Lisboa,Faculdade de Ciências e Tecnologia para a obtenção do grau de Mestre em Energia e Bioenergia

S100A6 Amyloid Fibril Formation Is Calcium-modulated and Enhances Superoxide Dismutase-1 (SOD1) Aggregation

S100A6 is a small EF-hand calcium- and zinc-binding protein involved in the regulation of cell proliferation and cytoskeletal dynamics. It is overexpressed in neurodegenerative disorders and a proposed marker for Amyotrophic Lateral Sclerosis (ALS). Following recent reports of amyloid formation by S100 proteins, we investigated the aggregation properties of S100A6. Computational analysis using aggregation predictors Waltz and Zyggregator revealed increased propensity within S100A6 helices HI and HIV. Subsequent analysis of Thioflavin-T binding kinetics under acidic conditions elicited a very fast process with no lag phase and extensive formation of aggregates and stacked fibrils as observed by electron microscopy. Ca2+ exerted an inhibitory effect on the aggregation kinetics, which could be reverted upon chelation. An FT-IR investigation of the early conformational changes occurring under these conditions showed that Ca2+ promotes anti-parallel β-sheet conformations that repress fibrillation. At pH 7, Ca2+ rendered the fibril formation kinetics slower: time-resolved imaging showed that fibril formation is highly suppressed, with aggregates forming instead. In the absence of metals an extensive network of fibrils is formed. S100A6 oligomers, but not fibrils, were found to be cytotoxic, decreasing cell viability by up to 40%. This effect was not observed when the aggregates were formed in the presence of Ca2+. Interestingly, native S1006 seeds SOD1 aggregation, shortening its nucleation process. This suggests a cross-talk between these two proteins involved in ALS. Overall, these results put forward novel roles for S100 proteins, whose metal-modulated aggregation propensity may be a key aspect in their physiology and function.

Lesões inteligentes em DNA

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Estudo da ação danificadora do 2,2'-Bipyridyl no DNA na presença de radiação UV

Em 2008, foram estimados no mundo, cerca de 12.7 milhões de novos casos de cancro e 7,6 milhões de mortes por cancro, sendo que 56% dos casos e 64% das mortes ocorreram nos países em desenvolvimento. Estes números indicam que é necessário se encontrar novos meios de combater este flagelo. Uma das possibilidades é encontrar moléculas intercalantes do ácido desoxirribonucleico (DNA) que se degradem na presença de radiação ou partículas carregadas de baixa energia que criem condições de induzir lesões no DNA, inibidoras da replicação e que portanto contribuam para a não proliferação de células cancerígenas. Assim, nesta dissertação analisou-se a influência do agente intercalante 2,2'-Bipyridyl do DNA em presença de radiação UV, 254 nm, na degradação do DNA. Os danos criados no DNA foram analisados pelas técnicas de espectroscopia de ultravioleta-visível e de infravermelho. Os resultados obtidos permitiram inferir que a cinética de degradação do DNA é mais eficiente na presença do composto 2,2'-Bipyridyl e que o ataque pelos produtos da decomposição do 2,2'-Bipyridyl é feito a todas as bases, embora com constantes características diferentes, sendo a ataque à guanina com uma constante de tempo maior. Estes resultados permitem concluir que este composto pode ser um possível candidato a indutor de lesões no DNA.

Spectroscopic characterization of natural dyes by their non-invasive identification on pre-Columbian codices: the Maya yellow

Mesoamerican cultures had a strong tradition of written and pictorial manuscripts, called the codices. In studies already performed it was found the use of Maya Blue, made from a mixture of indigo and a clay called palygorskite, forming an incredibly stable material where the dye is trapped inside the nanotubes of the clay, after heating. However, a bigger challenge lies in the study of the yellows used, for these civilizations might have used this clay-dye mixture to produce their yellow colorants. As a first step, it was possible to provide identification, by non-invasive methods, of two colorants (a flavonoid and a carotenoid). While the flavonoid absorbed between 368-379 nm, the carotenoid would absorb around 455 nm. A temperature study also conducted allowed to set 140ºC as the desirable temperature to heat the samples without degrading them. FT-IR, conventional Raman and SERS allowed us to understand the existence of a reaction between the dyes and the clays (palygorskite and kaolinite), however it is difficult to understand it in a molecular point of view. As a second step, five species of Mexican dyes were selected on the basis of historical sources. The Maya yellow samples were produced adapting the recipe proposed by Reyes-Valerio, supporting the yellow dyes extracted from the dried plants on the clays, with addition of water, and then heated at 140ºC. It was found that the addition of water in palygorskite would increase the pH, hence deprotonating the molecules having a clear negative effect in the color. A second recipe was developed, without the addition of water; however, it was found that the use of water based binders would still alter the color of the samples with palygorskite. In this case, kaolinite without heating yield better results as a Maya yellow hybrid. It was found that the Maya chemistry might not have been the same for all the colors. The Mesoamericans might have found that different dyes could work better to their desires if matched with different clays. It was noticeable that for a clear distinction between flavonoids and carotenoids the reflectance and emission studies suffice, but when clay is added, Raman techniques will perform better. For this reason, conventional Raman and SERS were employed in order to create a database for the Mesoamerican dyestuffs for a future identification.

Green synthesis of 2-Oxazoline-based polymers with antimicrobial activity using scCO2

Using a green methodology, 17 different poly(2-oxazolines) were synthesized starting from four different oxazoline monomers. The polymerization reactions were conducted in supercritical carbon dioxide under a cationic ring-opening polymerization (CROP) mechanism using boron trifluoride diethyl etherate as the catalyst. The obtained living polymers were then end-capped with different types of amines, in order to confer them antimicrobial activity. For comparison, four polyoxazolines were end-capped with water, and by their hydrolysis the linear poly(ethyleneimine) (LPEI) was also produced. After functionalization the obtained polymers were isolated, purified and characterized by standard techniques (FT-IR, NMR, MALDI-TOF and GPC). The synthesized poly(2-oxazolines) revealed an unusual intrinsic blue photoluminescence. High concentration of carbonyl groups in the polymer backbone is appointed as a key structural factor for the presence of fluorescence and enlarges polyoxazolines’ potential applications. Microbiological assays were also performed in order to evaluate their antimicrobial profile against gram-positive Staphylococcus aureus NCTC8325-4 and gram-negative Escherichia coli AB1157 strains, two well known and difficult to control pathogens. The minimum inhibitory concentrations (MIC)s and killing rates of three synthesized polymers against both strains were determined. The end-capping with N,N-dimethyldodecylamine of living poly(2- methyl-2-oxazoline) and poly(bisoxazoline) led to materials with higher MIC values but fast killing rates (less than 5 minutes to achieve 100% killing for both bacterial species) than LPEI, a polymer which had a lower MIC value, but took a longer time to kill both E.coli and S.aureus cells. LPEI achieved 100% killing after 45 minutes in contact with E. coli and after 4 hours in contact with S.aureus. Such huge differences in the biocidal behavior of the different polymers can possibly underlie different mechanisms of action. In the future, studies to elucidate the obtained data will be performed to better understand the killing mechanisms of the polymers through the use of microbial cell biology techniques.

Preparação e caracterização de micropartículas de polissacarídeos produzidas por secagem por atomização para libertação controlada de fármacos

Neste trabalho trabalho produziram-se micropartículas de polissacarídeos contendo um fármaco anticancerígeno, o 5-Fluorouracil, ou um anti-inflamatório, a Prednisolona, utilizando como matrizes encapsulantes o quitosano e o FucoPol. As micropartículas foram produzidas pelo método de secagem por atomização (spray-drying). Foram estudados vários reticulantes biocompatíveis: o ácido glutâmico; o ácido cítrico e a lisina. As micropartículas produzidas foram caracterizadas em termos de morfologia, tamanho, propriedades químicas, propriedades térmicas, cristalinidade e eficiência de encapsulamento recorrendo a técnicas como microscopia electrónica de varrimento (SEM), Espectro de infravermelho por transformada de Fourier (FT-IR), calorimetria diferencial de varrimento (DSC), difracção de raios-X (XRD) e espectroscopia UV. Os perfis de concentração foram obtidos realizando ensaios de libertação em dois meios distintos, em Suco Gástrico Simulado (pH=1,2) e Suco Intestinal Simulado (pH=6,8) e foram calculadas as velocidades de libertação para cada ensaio. Verificou-se que os ensaios com o fármaco modelo Prednisolona em matrizes de quitosano em meio ácido, pH=1,2, apresentam uma libertação mais lenta. Os reticulantes mais adequados para o quitosano são o ácido glutâmico para a libertação no estômago, a pH=1,2, e o ácido cítrico para a libertação no intestino, a pH=6,8. Em relação ao FucoPol, a concentração de reticulante mais adequada para ambos os meios de libertação revelou ser a de 50% em massa de lisina relativamente à massa de FucoPol.