993 resultados para Estudo comparado
Resumo:
Pós-graduação em Ciências Biológicas (Botânica) - IBB
Resumo:
Two experiments were carried out under greenhouse conditions to study the accumulation and distribution of dry mass and macronutrients in maize and Ipomoea hederifolia. Plants of both species had grown, separately, in pots with sand substrate and irrigation with nutrient solution. Treatments were represented by the times of evaluation, realized in intervals of 14 days, starting at 21 days after emergence (DAE). A maize plant showed slight growth up to 30 DAE, when dry mass allocation was higher in roots and leaves (80%); while an I. hederifolia plant, up to 50 DAE, when the allocation of dry mass was higher in offshoots and leaves (79). Dry mass accumulation was almost five times greater in maize (134 g per plant) than in I. hederifolia (29 g per plant). The average values of N and K contents were greater in I. hederifolia. Maximum accumulations of macronutrients by maize were 1,431; 474; 1,832; 594; 340, and 143 mg per plant, while by I. hederifolia, 727; 52; 810; 350; 148, and 65 mg per plant, for N, P, K, Ca, Mg, and S, respectively. Mean accumulation rate of dry mass and macronutrients by maize plants was crescent up to 87 DAE, reaching the maximum value at 103 DAE; while being crescent up to 121 DAE by I. hederifolia plants, reaching the maximum value at 138 DAE. Thus, beyond the interference on harvesting process, a population of I. hederifolia also can compete with maize crop for nutrients.
Resumo:
Pós-graduação em Química - IQ
Resumo:
O corte de aços por disco abrasivo é um dos processos que apresentam as melhores características de economia, eficiência e rapidez, e ainda hoje é muito utilizado no meio industrial se comparado a outros processos tradicionais de corte como o cisalhamento (tesourão), torneamento (sangramento), serragem com serras metálicas, serragem por atrito com lâminas circulares sem dentes e chama oxi-acetileno. Da literatura formal mais recente, nota-se que durante os últimos anos as máquinas para a realização dos cortes foram inovadas. Entretanto, esta atenção não foi dada à ferramenta de corte abrasiva. A falta de literatura técnica dificulta a escolha das condições de corte e da sua otimização no meio industrial. Este fato é agravado pela grande diversidade de discos abrasivos disponíveis no mercado, com diferentes qualidades e preço. As decisões sobre as condições de corte são baseadas em experiências pessoais, sem critério definido, e freqüentemente desprezam os aspectos de segurança inerentes ao processo. A concorrência estrangeira, através da globalização da economia, está obrigando as indústrias nacionais a atenderem os padrões internacionais de qualidade e desempenho. Uma forma das indústrias nacionais tornarem-se mais competitivas é através do conhecimento detalhado das operações de corte com discos abrasivos. Neste trabalho é apresentado um estudo sobre o comportamento de discos abrasivos, submetidos a diversas condições de corte. Os resultados são discutidos em função da análise da velocidade de corte, velocidade de mergulho do disco abrasivo na peça, força tangencial de corte média, tempo de corte e relação G.
Resumo:
Este trabalho foi baseado em uma revisão de literatura sobre o fenômeno do abandono esportivo que ocorre cada vez mais com grande freqüência no esporte nacional, seja ele de alto rendimento ou não. Com base nesta revisão sobre o assunto foram abordados diversos fatores que podem contribuir para que crianças e adolescentes a abandonem o esporte, foi feita uma analise dos fatores que influenciam as crianças e adolescentes na pratica esportiva e os fatores que são necessários para que os jovens permaneçam no esporte. Foram abordados os temas de desenvolvimento biológico e psicológico de crianças na passagem para a adolescência, a influencia do esporte na sociedade atual, as influencias que o esporte pode causar na vida de crianças e adolescentes e seus benefícios. Também foi feita uma grande abordagem sobre a psicologia do esporte e seus aspectos que interferem na pratica esportiva dos adolescentes, foi discutido como estes fatores podem influenciar positivamente, para que o jovem continue a praticar esporte, e negativamente levando ao abandono esportivo. Por fim foi feito uma analise dos fatores mais comuns encontrados na literatura sobre os principais fatores que desmotivam crianças e adolescentes na pratica esportiva e uma breve explicação na síndrome do burnout. Ao final de cada capitulo foi feito uma analise comparativa do assunto do capitulo com os aspectos observados nos jovens da modalidade de basquetebol de Santa Cruz das Palmeiras, local onde este estudo foi feito, e a cada capitulo foi comparado os ...(Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Alterações nas competências motoras da infância até a idade adulta envolvem vários aspectos do comportamento humano. Na perspectiva cognitiva, indivíduos planejam ações motoras através de três estágios seqüenciais e interdependentes: identificação do estímulo, seleção da resposta e programação da resposta. Após tais estágios que correspondem à preparação motora, o tempo de execução inicia. A partir do sinal imperativo, o executante seleciona e programa a ação. Se o estímulo é apresentado consistentemente da mesma forma, então a resposta a tal estímulo será mais rápida, comparada a uma situação em que o estímulo é apresentado de forma diferente do esperado. Neste último caso, o executante necessitará reprogramar sua ação motora e consequentemente levará mais tempo para planejá-la. O objetivo deste estudo foi examinar o efeito de informação prévia (i.e., dica) na preparação e execução de tarefa de alcance a um alvo por crianças de 6, 8, e 10 anos e adultos. Informação prévia era fornecida em três condições experimentais: correta, incorreta e neutra. As variáveis dependentes foram: tempo de reação (TR), tempo de movimento (TM), tempo de desaceleração (TD), índice de retidão (IR) e número de unidades de movimento (UnM). Com respeito à preparação da ação motora, os resultados indicaram que o TR diminuiu com a idade. Para as crianças de 6 anos, o TR com dica correta foi ligeiramente mais rápido do que na condição sem dica. Todavia, na condição com dica incorreta, o TR para as crianças de 6 anos era mais lento comparado com os demais grupos. Com respeito à execução da ação motora, os resultados indicaram mudanças desenvolvimentais em todas as variáveis dependentes, TM, TD, IR, UnM. De modo geral, os resultados do presente estudo mostraram que aos 6 anos de idade crianças são capazes de utilizar informação antecipada para preparar uma simples ação de alcance...
Resumo:
A utilização de extratos vegetais tem sido considerada uma forte tendência no desenvolvimento de formulações dermocosméticas, uma vez que podem apresentar diversas ações, como antioxidantes e despigmentantes, atuando tanto contra os processos de envelhecimento como hiperpigmentação da pele. Dentre as plantas que apresentam tais propriedades, o chá verde se destaca devido a sua riqueza em compostos polifenólicos e taninos condensados. O extrato seco de chá verde obtido através da extração com uma solução de acetona 70% apresenta o maior teor de fenólicos e flavonoides, mas pouca diferença quando comparado com o obtido de uma solução de acetona 50%. A alta concentração desses compostos no extrato seco é responsável pela ótima ação antioxidante do chá verde, tornando-o capaz de inibir 50% dos radicais livres do meio com apenas 4,62 µg/mL quando em solução metanólica. Entretanto, a sua atividade despigmentante não se torna evidenciada, com apenas 1,93% de ação com a mesma concentração de chá verde. Este extrato seco, quando incorporado a sistemas nanoestruturados como os sistemas líquido-cristalinos estabilizados com Procetyl AWS® passa a ter uma ação antioxidante potencializada, alcançando uma inibição de radicais livres em até, aproximadamente, 72%, enquanto sua capacidade despigmentante não é demonstrada, apresentando uma inibição de tirosinase de, no máximo, 0,88%. A caracterização estrutural foi realizada por meio de análises de microscopia de luz polarizada, comportamento reológico e perfil de textura das formulações. Para o estudo de estabilidade foram empregadas avaliação visual, centrifugação e pH. A atividade antioxidante foi determinada com base na ação seqüestrante do radical 2,2-difenil-1-picril-hidrazila (DPPH) e a ação despigmentante in vitro, avaliada quanto à inibição da tirosinase, pelo método enzimático... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Com o objetivo de propor mecanismos que auxiliem na compreensão da neurobiologia do medo e da ansiedade, diversos modelos animais vem sendo utilizados. Dentre eles destaca-se o Teste de Exposição ao Rato (RET), que é um modelo etológico de interação presa (camundongo) – predador (rato), conhecido por eliciar a expressão de diversos tipos de comportamentos defensivos no camundongo, tais como avaliação de risco, esquiva, congelamento, entre outros. Com o intuito de aumentar a aversividade do modelo proposto por Yang e colaboradores (2004), foi proposto um novo modelo de RET, semelhante ao modelo padrão, porém com alterações de algumas variáveis como aumento da luminosidade, ausência de maravalha, alteração do local de inserção do camundongo no aparato, substituição da tela de arame (usada na separação da superfície) por uma tela de acrílico e arame e uma divisão virtual da superfície em duas partes, uma distante da tela por 10 cm (superfície proximal) e outra com 13 cm até chegar ao túnel (superfície distal). Um estudo piloto realizado comparando o novo teste de exposição ao rato com o modelo padrão demonstrou que no novo modelo de exposição há uma maior preferência pela presa às áreas protegidas (toca e túnel) e uma maior expressão de avaliação de risco, indicando talvez uma maior sensibilidade à expressão de comportamentos defensivos de camundongos e possivelmente a fármacos que atuem no sistema de defesa. No presente estudo foram investigados os efeitos dos (i) benzodiazepínicos diazepam e alprazolam, (ii) dos fármacos ansiogênicos cafeína e pentilenotetrazol e (iii) do antidepressivo fluoxetina (aguda e cronicamente). O tratamento com alprazolam resultou num efeito antiaversivo mais evidente quando comparado ao diazepam. O tratamento agudo 10 com cafeína, por sua vez, apresentou um efeito ansiogênico bastante sutil, diferente... (Resumo completo, clicar acesso eletrônico abaixo)
Resumo:
Essential oils are products from plants and can be located in parts or in its entirety. There are several methods for its extraction, where the most suitable depends on the plant or the use of the essence. The main species cultivated in Brazil are the Corymbia citriodora, Eucalyptus globulus and Eucalyptus staigeriana. The Corymbia citriodora is a species that was introduced in Brazil along with other species, with the initial objective of timber production. The yield of oil can range from 0.5 % to 3.0% according to the literature and this can be optimized by reducing the moisture content of the leaves. Studies show that the lower water content in the leaves allows the vapor stream generated in the extractor can drag, more efficiently, the volatiles stored in the cells as compared with the green material. The drying of the sheets is important for companies, so that there is transport of water, increasing the volume of the sheets to distillation and hence a greater volume of oil. The objective of this study was to compare the drying methods, analyzing the income of the essence and determine the best method to optimize the yield of essential oil. Experimental tests were performed natural drying 10, 15 and 20 days and fluidized with times of 60, 90 and 120 minutes and after drying were extractions of the oil. The results obtained for fresh leave yield was 1.20 % and the drying time which showed the highest yield was 15 and 20 days with 2.90 % and 2.70 % yield, respectively, with the lowest level humidity of 16%. The yields obtained in fluidized bed drying did not change as the natural drying to between 1.64% and 1.7%. It is concluded that the decreased level of the sheets increases the yield of oil and the temperature in the fluidized bed is essential for the removal of water from the leaves necessary to increase the yield
Resumo:
The manufacture of plywood panel already has about eighty years in Brazil. In general, plywood panels differ by their nature, composition and manufacturing; the most common MDF, OSB, particle and the joist. Some of these products can be generated fromindustrial waste, as the panelblockboard, you can use in their training waste destop boards (Battens), from industrial processes or processing of primary wood. This work aims to present the detailed study of the economic viability of utilization of industrial solid waste timber through the acquisition of a machine amarradeira of joists in a wood processing unit in city Itapeva-SP. We studied the application of wastein the composition of kernels blockboard panel tied its commercial acceptance and future prospects market. We noticed great economic advantage in investing in the study, compared with the transformation process of the joists in biomass energy, although the investment decision involves not only financial matters but also the acceptance market the product to be manufactured
Resumo:
Due the differences between interaction physics process with matter for protons and photons, the proton beam tomography (pCT) has some vantages to comparison with conventional tomography. Also it is confirmed that usually pCT has better dose distribution and highest contrast resolution. The pCT allow not only view the internal structure of an object without destroying it, but also directly measure of volume density of electrons. Also it is confirmed that usually pCT has better dose distribution and highest contrast resolution. At the same time, there are many scientific and technical aspects to a detailed study: the capacity and limitations of the pCT methods are not well clarified. Through computations, based on Monte Carlo Method was carried out a detailed study of the contribution of non-elastic nuclear spreading, and together was compared with an analytical model for the deflection angle and the lateral deflection of protons in the target volume. The programs used were SRIM 2006 code and MCNPX v.2.50 code
Resumo:
The present work assessment materials can be used as fuel cells electrocatalysts. The alkaline fuel cell though was less studied, has some advantages compared to the acid configuration. The materials assesment were Au polycrystalline and intermetallics ordered phases of AuIn, AuSn and AuSb2. Your electrocatalytic properties were studied across cyclic voltametry and chronoamperometry techniques in Sodium Hydroxide 0,15M and Metanol 0,15M solution. The results obtained show a more efficiency to intermetallic AuIn as electrocatalyst for the oxidation reaction of methanol in alkaline medium, it showed high levels of current density and on set potential less positive compared to Au polycrystalline. The intermetallic AuSn showed activity just higher concentrations of methanol. Except AuSb2, who represented himself unstable in alkaline media, the intermetallics AuIn and AuSn present a promising future as anode materials for the oxidation in alkaline medium
Resumo:
This paper aimed to study the treatability of rainwater collected in Rio Claro, SP, using natural coagulant tannin based. The tannin was compared with other too primary coagulants, namely ferric chloride and corn starch. Assays were performed in laboratory scale using equipment known as Jarteste and aimed to study the conditions most suitable dosage and coagulation pH. First tests were conducted to compare the coagulating and determination of the conditions to be used in the following tests, taking as a criterion the greatest efficiency for water treatment. Also performed were performed tests to construct the tannin coagulation diagram, using the optimal concentration found in the previous phase, by varying the dosage of coagulant and the pH of clotting in order to determine the isoefficiency regions for apparent color and turbidity. Finally, tests were performed cyclically filtration with filter paper. Preliminary tests indicated that the vegetable tannin concentration 3% (m/m) from the commercial solution was presented the best set of results (84.3% removal of apparent color and 82.51% removal of turbidity) compared to ferric chloride (66.25% removal efficiency and apparent color of turbidity 67.82%) and starch (73.68% removal efficiency apparent color and turbidity to 67.19%). The coagulation diagrams indicate that the best region to work with vegetable tannin 3% is where the coagulant dosage ranges from 15 mg/L to about 37.5 mg/L and coagulation pH ranging from about 6.5 to 7.5. The cyclic filtration showed to be not efficient for the best dosage of coagulant, due to the process of clogging of the filter paper, but proved to be efficient for other dosages. Thus, for the waters studied, the results indicate that the natural coagulant based tannin is an alternative to conventional coagulants, possessing benefits of technical and environmental
Resumo:
The analysis of the extraction process in oil wells is presented exploring the challenges to the effectiveness of the procedure is shown step by step in the process. There is an analysis of the major tools and equipment needed in the drilling process, promoting the understanding of the challenges in the pre-salt layers, compared to conventional processes. The work is reinforced through studies of the influence of the corrosive compared not corrosive environment in drill strings
Resumo:
This study evaluated the effect of physical and chemical activation on the speed of penetration of hydrogen peroxide bleaching agents present in different concentrations through the enamel and dentin. One hundred and twenty bovine incisors were used, which were obtained enamel/dentin discs of the buccal surface, with 6 mm in diameter. The samples were divided into six groups: G1 - Hydrogen Peroxide Gel 20%, G2 - Hydrogen Peroxide Gel 20% with light activation, G3 - Hydrogen Peroxide Gel 20% with Manganese Gluconate; G4 - Hydrogen Peroxide Gel 35%; G5 - Hydrogen Peroxide Gel 35% with the light activation and G6 - Hydrogen Peroxide Gel 35% with Manganese Gluconate. The specimens were placed in a transparent support on which there was a substance sensitive to hydrogen peroxide immediately below and in contact with the specimen. After the procedures for applying the gel for each group, one video camera was positioned and operated to monitor the time of penetration of peroxide in each specimen. The recording ended after changing the color of the fluid revealed in all specimens and times were noted for comparison. ANOVA analysis showed that concentration and type of activation of bleaching gel significantly influenced the diffusion time of hydrogen peroxide (P 0.05). 35% hydrogen peroxide showed the lowest diffusion times compared to the groups with 20% hydrogen peroxide gel. The light activation of hydrogen peroxide decrease significantly the diffusion time compared to chemical activation. The highest diffusion time was obtained with 20% hydrogen peroxide chemically activated. The diffusion time of hydrogen peroxide was dependent on activation and concentration of hydrogen peroxide. The higher concentration of hydrogen peroxide diffused through dental tissues more quickly