The impact of European legislative and technology measures to reduce air pollutants on air quality, human health and climate

European air quality legislation has reduced emissions of air pollutants across Europe since the 1970s, affecting air quality, human health and regional climate. We used a coupled composition-climate model to simulate the impacts of European air quality legislation and technology measures implemented between 1970 and 2010. We contrast simulations using two emission scenarios; one with actual emissions in 2010 and the other with emissions that would have occurred in 2010 in the absence of technological improvements and end-of-pipe treatment measures in the energy, industrial and road transport sectors. European emissions of sulphur dioxide, black carbon (BC) and organic carbon in 2010 are 53%, 59% and 32% lower respectively compared to emissions that would have occurred in 2010 in the absence of legislative and technology measures. These emission reductions decreased simulated European annual mean concentrations of fine particulate matter(PM2.5) by 35%, sulphate by 44%, BC by 56% and particulate organic matter by 23%. The reduction in PM2.5 concentrations is calculated to have prevented 80 000 (37 000–116 000, at 95% confidence intervals) premature deaths annually across the European Union, resulting in a perceived financial benefit to society of US$232 billion annually (1.4% of 2010 EU GDP). The reduction in aerosol concentrations due to legislative and technology measures caused a positive change in the aerosol radiative effect at the top of atmosphere, reduced atmospheric absorption and also increased the amount of solar radiation incident at the surface over Europe. We used an energy budget approximation to estimate that these changes in the radiative balance have increased European annual mean surface temperatures and precipitation by 0.45 ± 0.11 °C and by 13 ± 0.8 mm yr−1 respectively. Our results show that the implementation of European legislation and technological improvements to reduce the emission of air pollutants has improved air quality and human health over Europe, as well as having an unintended impact on the regional radiative balance and climate.

Writing-to-Learn Using Social Pedagogy and Technology

Accounting faculty from LaGuardia will share the structure and results of an initiative centered on using ePortfolio and social pedagogy to facilitate writing-to-learn for accounting students. Through a series of ePortfolio-based assignments that connected two classes, along with an in-class writing workshop conducted by non-discipline faculty, students worked together to understand the importance of writing in the accounting discipline and strengthened their writing abilities.

Constructive alignment in Computer Engineering and Informatics departments at Dalarna University : An empirical investigation

Background: Constructive alignment (CA) is a pedagogical approach that emphasizes the alignment between the intended learning outcomes (ILOs), teaching and learning activities (TLAs) and assessment tasks (ATs) as well as creation of a teaching/learning environment where students will be able to actively create their knowledge. Objectives: This paper aims at investigating the extent of constructively-aligned courses in Computer Engineering and Informatics department at Dalarna University, Sweden. This study is based on empirical observations of teacher’s perceptions of implementation of CA in their courses. Methods: Ten teachers (5 from each department) were asked to fill a paper-based questionnaire, which included a number of questions related to issues of implementing CA in courses. Results: Responses to the items of the questionnaire were mixed. Teachers clearly state the ILOs in their courses and try to align the TLAs and ATs to the ILOs. Computer Engineering teachers do not explicitly communicate the ILOs to the students as compared to Informatics teachers. In addition, Computer Engineering teachers stated that their students are less active in learning activities as compared to Informatics teachers. When asked about their subjective ratings of teaching methods all teachers stated that their current teaching is teacher-centered but they try to shift the focus of activity from them to the students. Conclusions: From teachers’ perspectives, the courses are partially constructively-aligned. Their courses are “aligned”, i.e. ILOs, TLAs and ATs are aligned to each other but they are not “constructive” since, according to them, there was a low student engagement in learning activities, especially in Computer Engineering department.

Development, capabilities and technology : an evaluative framework

In this paper we present a framework to be used for evaluation of Information and Communication Technology for Development (ICT4D) projects. The framework is based on Sen´s notion of development as freedom where human capabilities and functionings are seen as key aspects to development. Sen´s capability approach presents an alternative way of seeing and evaluating development (alternative to more traditional ways of measuring development). The approach is based on expanding freedoms, or eliminating unfreedoms, for people so that they can live a life that they have reason to value. Even though Sen is referenced a lot in ICT4D literature the analysis rarely goes further then stating that Sen presents an alternative to traditional ways of development. Reasons can be that the capability approach does not specifically mention technology, in addition to the lack of guidelines presented by Sen on how to use the framework. The aim of this paper is to operationalize the evaluation process and to include a clear role for technology in Sen´s capability framework. The framework is validated with a case on distance education from Bangladesh. 

The effect of social security, demography and technology on retirement

This article investigates the causes in the reduction of labor force participation of the old. We argue that the changes in social security policy, in technology and in demography may account for most of the changes in retirement over the second part of the last century in the U.S. economy. We develop a dynamic general equilibrium model with endogenous retirement that embeds social security legislation. The model is able to match very closely the increase in the retirement rate of males aged 65 and older. It also quanti es the isolated impact on retirement and on the solvency of the social security system of the di¤erent factors. The model suggests that technological and demographic changes had a strong in uence on retirement, so that it would have increased signi cantly even if the social security rules had not changed. However, as the latter became much more generous in the past, changes in social security policy can account not only for a sizeable part of the expansion of retirement, but also for the most of the observed increase in the social security expenses as a share of GDP.

The effect of social security, demography and technology on retirement

This article investigates the causes in the reduction of labor force participation of the old. We argue that the changes in social security policy, in technology and in demography may account for most of the changes in retirement over the second part of the last century in the U.S. economy. We develop a dynamic general equilibrium model with endogenous retirement that embeds social security legislation. The model is able to match very closely the increase in the retirement rate of males aged 65 and older. It also quanti es the isolated impact on retirement and on the solvency of the social security system of the di¤erent factors. The model suggests that technological and demographic changes had a strong in uence on retirement, so that it would have increased signi cantly even if the social security rules had not changed. However, as the latter became much more generous in the past, changes in social security policy can account not only for a sizeable part of the expansion of retirement, but also for the most of the observed increase in the social security expenses as a share of GDP.

The effect of social security, health, demography and technology on retirement

This article studies the determinants of the labor force participation of the elderly and investigates the factors that may account for the increase in retirement in the second half of the last century. We develop a life-cycle general equilibrium model with endogenous retirement that embeds Social Security legislation and Medicare. Individuals are ex ante heterogeneous with respect to their preferences for leisure and face uncertainty about labor productivity, health status and out-of-pocket medical expenses. The model is calibrated to the U.S. economy in 2000 and is able to reproduce very closely the retirement behavior of the American population. It reproduces the peaks in the distribution of Social Security applications at ages 62 and 65 and the observed facts that low earners and unhealthy individuals retire earlier. It also matches very closely the increase in retirement from 1950 to 2000. Changes in Social Security policy - which became much more generous - and the introduction of Medicare account for most of the expansion of retirement. In contrast, the isolated impact of the increase in longevity was a delaying of retirement.

An Anisotropic Model of Damage and Unilateral Effect for Brittle Materials

This work deals with the initial applications and formulation of an aniscitropic plastic-damage constitutive model proposed for non-linear analysis of reinforced concrete structures submitted to a loading with change of the sign. The original constitutive model is based on the fundamental hypothesis of energy equivalence between real and continuous medium following the concepts of the Continuum Damage Mechanics. The concrete is assumed as an initial elastic isotropic medium presenting anisotropy, permanent strains and bimodularity (distinct elastic responses whether traction or compression stress states prevail) induced by damage evolution. In order to take into account the bimodularity, two damage tensors governing the rigidity in tension or compression regimes are introduced. Then, some conditions are introduced in the original version of the model in order to simulate the damage unilateral effect. The three-dimensional version of the proposed model is analyzed in order to validate its formulation when compared to micromechanical theory. The one-dimensional version of the model is applied in the analyses of a reinforced concrete beam submitted to a loading with change of the sign. Despite the parametric identification problems, the initial applications show the good performance of the model.

PDGF-B gene therapy accelerates bone engineering and oral implant osseointegration

Platelet-derived growth factor-BB (PDGF-BB) stimulates repair of healing-impaired chronic wounds such as diabetic ulcers and periodontal lesions. However, limitations in predictability of tissue regeneration occur due, in part, to transient growth factor bioavailability in vivo. Here, we report that gene delivery of PDGF-B stimulates repair of oral implant extraction socket defects. Alveolar ridge defects were created in rats and were treated at the time of titanium implant installation with a collagen matrix containing an adenoviral (Ad) vector encoding PDGF-B (5.5 x 10(8) or 5.5 x 10(9) pfu ml (1)), Ad encoding luciferase (Ad-Luc; 5.5 x 10(9) pfu ml (1); control) or recombinant human PDGF-BB protein (rhPDGF-BB, 0.3 mg ml (1)). Bone repair and osseointegration were measured through backscattered scanning electron microscopy, histomorphometry, microcomputed tomography and biomechanical assessments. Furthermore, a panel of local and systemic safety assessments was performed. Results indicated that bone repair was accelerated by Ad-PDGF-B and rhPDGF-BB delivery compared with Ad-Luc, with the high dose of Ad-PDGF-B more effective than the low dose. No significant dissemination of the vector construct or alteration of systemic parameters was noted. In summary, gene delivery of Ad-PDGF-B shows regenerative and safety capabilities for bone tissue engineering and osseointegration in alveolar bone defects comparable with rhPDGF-BB protein delivery in vivo. Gene Therapy (2010) 17, 95-104; doi: 10.1038/gt.2009.117; published online 10 September 2009

Study of a hybrid solid oxide fuel cell: Energetic analysis and sankey diagram

In this paper a hybrid solid oxide fuel cell (SOFC) system is analyzed. This system applies a combined cycle utilizing gas turbine associated to a SOFC for rational decentralized energy production. Initially the relative concepts about the fuel cell are presented, followed by some chemical and technical informations such as the change of Gibbs free energy in isothermal fuel oxidation (or combustion) directly into electricity. This represents a very high fraction of the lower heating value (LHV) of a hydrocarbon fuel. In the next step a methodology for the study of SOFC associated with a gas turbine system is developed, considering the electricity and steam production for a hospital, as regard to the Brazilian conditions. This methodology is applied to energetic analysis. Natural gas is considered as a fuel. In conclusion, it is shown by a Sankey Diagram that the hybrid SOFC system may be an excellent opportunity to strengthen the decentralized energy production in Brazil. It is necessary to consider that the cogeneration in this version also is a sensible alternative from the technical point of view, demanding special methods of design, equipment selection and mainly of the contractual deals associated to electricity and fuel supply.

Science and technology policies in open economies: the case of Latin America and the Caribbean

Includes bibliography

Innovation and technology policy (ITP) for catching up: a three phase life cycle framework for industrializing economies

Includes bibliography