Photon-hadron jet correlations in p plus p and Au plus Au collisions at s(NN)=200 GeV

We report the observation at the Relativistic Heavy Ion Collider of suppression of back-to-back correlations in the direct photon+jet channel in Au+Au relative to p+p collisions. Two-particle correlations of direct photon triggers with associated hadrons are obtained by statistical subtraction of the decay photon-hadron (gamma-h) background. The initial momentum of the away-side parton is tightly constrained, because the parton-photon pair exactly balance in momentum at leading order in perturbative quantum chromodynamics, making such correlations a powerful probe of the in-medium parton energy loss. The away-side nuclear suppression factor, I(AA), in central Au+Au collisions, is 0.32 +/- 0.12(stat)+/- 0.09(syst) for hadrons of 3 < p(T)(h)< 5 in coincidence with photons of 5 < p(T)(gamma)< 15 GeV/c. The suppression is comparable to that observed for high-p(T) single hadrons and dihadrons. The direct photon associated yields in p+p collisions scale approximately with the momentum balance, z(T)equivalent to p(T)(h)/p(T)(gamma), as expected for a measurement of the away-side parton fragmentation function. We compare to Au+Au collisions for which the momentum balance dependence of the nuclear modification should be sensitive to the path-length dependence of parton energy loss.

Inclusive cross section and double helicity asymmetry for pi(0) production in p plus p collisions at root s=62.4 GeV

The PHENIX experiment presents results from the RHIC 2006 run with polarized p + p collisions at root s = 62.4 GeV, for inclusive pi(0) production at midrapidity. Unpolarized cross section results are measured for transverse momenta p(T) = 0.5 to 7 GeV/c. Next-to-leading order perturbative quantum chromodynamics calculations are compared with the data, and while the calculations are consistent with the measurements, next-to-leading logarithmic corrections improve the agreement. Double helicity asymmetries A(LL) are presented for p(T) = 1 to 4 GeV/c and probe the higher range of Bjorken x of the gluon (x(g)) with better statistical precision than our previous measurements at root s = 200 GeV. These measurements are sensitive to the gluon polarization in the proton for 0.06 < x(g) < 0.4.

Event structure and double helicity asymmetry in jet production from polarized p plus p collisions at root s=200 GeV

We report on the event structure and double helicity asymmetry (A(LL)) of jet production in longitudinally polarized p + p collisions at root s = 200 GeV. Photons and charged particles were measured by the PHENIX experiment at midrapidity vertical bar eta vertical bar < 0.35 with the requirement of a high-momentum (> 2 GeV/c) photon in the event. Event structure, such as multiplicity, p(T) density and thrust in the PHENIX acceptance, were measured and compared with the results from the PYTHIA event generator and the GEANT detector simulation. The shape of jets and the underlying event were well reproduced at this collision energy. For the measurement of jet A(LL), photons and charged particles were clustered with a seed-cone algorithm to obtain the cluster pT sum (p(T)(reco)). The effect of detector response and the underlying events on p(T)(reco) was evaluated with the simulation. The production rate of reconstructed jets is satisfactorily reproduced with the next-to-leading-order and perturbative quantum chromodynamics jet production cross section. For 4< p(T)(reco) < 12 GeV/c with an average beam polarization of < P > = 49% we measured Lambda(LL) = -0.0014 +/- 0.0037(stat) at the lowest p(T)(reco) bin (4-5 GeV= c) and -0.0181 +/- 0.0282(stat) at the highest p(T)(reco) bin (10-12 GeV= c) with a beam polarization scale error of 9.4% and a pT scale error of 10%. Jets in the measured p(T)(reco) range arise primarily from hard-scattered gluons with momentum fraction 0: 02 < x < 0: 3 according to PYTHIA. The measured A(LL) is compared with predictions that assume various Delta G(x) distributions based on the Gluck-Reya-Stratmann-Vogelsang parameterization. The present result imposes the limit -a.1 < integral(0.3)(0.02) dx Delta G(x, mu(2) = GeV2) < 0.4 at 95% confidence level or integral(0.3)(0.002) dx Delta G(x, mu(2) = 1 GeV2) < 0.5 at 99% confidence level.

Identified charged hadron production in p plus p collisions at root s=200 and 62.4 GeV

Transverse momentum distributions and yields for pi(+/-), K(+/-), p, and (p) over bar in p + p collisions at root s = 200 and 62.4 GeV at midrapidity are measured by the PHENIX experiment at the Relativistic Heavy Ion Collider (RHIC). These data provide important baseline spectra for comparisons with identified particle spectra in heavy ion collisions at RHIC. We present the inverse slope parameter T(inv), mean transverse momentum < p(T)>, and yield per unit rapidity dN/dy at each energy, and compare them to other measurements at different root s in p + p and p + (p) over bar collisions. We also present the scaling properties such as m(T) scaling and x(T) scaling on the p(T) spectra between different energies. To discuss the mechanism of the particle production in p + p collisions, the measured spectra are compared to next-to-leading-order or next-to-leading-logarithmic perturbative quantum chromodynamics calculations.

Design and Characterization of Novel Wear Resistant Multilayer CVD Coatings with Improved Adhesion Between Al(2)O(3) and Ti(C,N)

Multilayer CVD coatings for high speed cutting applications were designed to achieve high wear and heat resistance during machining of steel alloys. In this work the microstructure and cutting performance of these novel multilayer CVD coatings are investigated and compared with standard CVD multilayer coatings. 3D-FIB tomography is used to characterize the microstructure of the layers, especially the transition between the Ti(C,N) and the Al(2)O(3) layer. The 3D reconstruction of the surface of the Ti(C,N) layer shows the formation of protruded Ti(C,N) grains with a very particular architecture, which penetrate into the Al(2)O(3) top-layer, providing a mechanical anchoring between both layers. Cemented carbides coated with the novel CVD multilayer present reduced crater and flank wear as well as improved adherence between the Al(2)O(3) top-layer and the Ti(C,N) layer leading to a dramatic improvement of cutting performance.

Fretting fatigue in overhead conductors: Rig design and failure analysis of a Grosbeak aluminium cable steel reinforced conductor

The performance optimisation of overhead conductors depends on the systematic investigation of the fretting fatigue mechanisms in the conductor/clamping system. As a consequence, a fretting fatigue rig was designed and a limited range of fatigue tests was carried out at the middle high cycle fatigue regime in order to access an exploratory S-N curve for a Grosbeak conductor, which was mounted on a mono-articulated aluminium clamping system. Subsequent to these preliminary fatigue tests, the components of the conductor/clamping system, such as ACSR conductor, upper and lower clamps, bolt and nuts, were subjected to a failure analysis procedure in order to investigate the metallurgical free variables interfering on the fatigue test results, aiming at the optimisation of the testing reproducibility. The results indicated that the rupture of the planar fracture surfaces observed in the external At strands of the conductor tested under lower bending amplitude (0.9 mm) occurred by fatigue cracking (I mm deep), followed by shear overload. The V-type fracture surfaces observed in some At strands of the conductor tested under higher bending amplitude (1.3 mm) were also produced by fatigue cracking (approximately 400 mu m deep), followed by shear overload. Shear overload fracture (45 degrees fracture surface) was also observed on the remaining At wires of the conductor tested under higher bending amplitude (1.3 mm). Additionally, the upper and lower Al-cast clamps presented microstructure-sensitive cracking, which was folowed by particle detachment and formation of abrasive debris on the clamp/conductor tribo-interface, promoting even further the fretting mechanism. The detrimental formation of abrasive debris might be inhibited by the selection of a more suitable class of as-cast At alloy for the production of clamps. Finally, the bolt/nut system showed intense degradation of the carbon steel nut (fabricated in ferritic-pearlitic carbon steel, featuring machined threads with 190 HV), with intense plastic deformation and loss of material. Proper selection of both the bolt and nut materials and the finishing processing might prevent the loss in the clamping pressure during the fretting testing. It is important to control the specification of these components (clamps, bolt and nuts) prior to the start of large scale fretting fatigue testing of the overhead conductors in order to increase the reproducibility of this assessment. (c) 2008 Elsevier Ltd. All rights reserved.

In silico analysis of microRNAS targeting the HLA-G 3 ` untranslated region alleles and haplotypes

It has been reported that microRNAs (miRNA) may have allele-specific targeting for the 3` untranslated region (3` UTR) of the HLA-G locus. In a previous study, we reported 11 3`UTR haplotypes encompassing the 14-bp insertion/deletion polymorphism and seven SNPs (+3003 T/C, +3010 C/G, +3027 C/A, +3035 C/T, +3142 C/G, +3187A/G,and +3196 C/G), of which only the +3142 C/G SNP has been reported to influence the binding of miRNAs. Using bioinformatics analyses, we identified putative miRNA-binding sites considering the haplotypes encompassing these eight polymorphic sites, and we ranked the lowest free energies that could potentially lead to an mRNA degradation or translational repression. When a specific haplotype or a particular SNP was associated with a miRNA-binding site, we defined a free energy difference of 4 kcal/mol between alleles to classify them energetically distant. The best results were obtained for the miR-513a-5p, miR-518c*, miR-1262 and miR-92a-1*, miR-92a-2*, miR-661, miR-1224-5p, and miR-433 miRNAs, all influencing one or more of the +3003, +3010, +3027, and +3035 SNPs. The miR-2110, miR-93, miR-508-5p, miR-331-5p, miR-616, miR-513b, and miR-589* miRNAs targeted the 14-bp fragment region, and miR-148a, miR-19a*, miR-152, mir-148b,and miR-218-2 also influenced the +3142C/G polymorphism. These results suggest that these miRNAs might play a relevant role on the HLA-G expression pattern. (C) 2009 Published by Elsevier Inc. on behalf of American Society for Histocompatibility and Immunogenetics.

Development and characterization of microsatellite loci in the marsh deer (Blastocerus dichotomus Cervidae)

Marsh deer (Blastocerus dichotomus) is one of the most exposed large mammals in South America. To aid in the conservation management of the species, nine polymorphic microsatellite loci were isolated and tested on up to 50 animals, showing 3-12 alleles and expected heterozygosity values varying from 0.69 to 0.89. These markers should be of considerable utility in future population and ecological genetics studies of this species. The marsh deer (Blastocerus dichotomus) is the biggest South American species of deer. Originally distributed across a large part of South America, stretching from the south bank of the Amazon river to northern Argentina, significant wild populations are now restricted to the Pantanal, swamplands that cover about 40% of southwest Brazil. The marsh deer is listed as Vulnerable on the Red List of the IUCN. Three populations of the species from three areas in the Parana River basin (between the states of Sao Paulo and Mato Grosso do Sul) were recently studied by observing protein polymorphism at 17 loci (Oliveira et al. 2005). Now we are presenting data about isolation of microsatellite markers to improve the results regarding population structure.

Gestão técnica de edifícios com KNX

A eficiencia energetica dos edificios e cada vez mais uma das prioridades nas agendas dos gestores comercias dos edifícios e proprietarios. Em parte deve-se ao processo de certificacao energetica dos edificios, que entrou em vigor em 2007, atraves dos Decretos de Lei 78/2006, 79/2006 e 80/2006. A solucao passa agora pela poupanca continua de energia atraves de uma eficiente Gestao Tecnica de Edificios.

Levantamento de práticas ambientais e energéticas de PMEs em Portugal

Para qualquer empresa o seu maior objetivo passa pela produção de lucro e, atualmente, esse aspeto está diretamente relacionado com a sua capacidade de manter uma gestão que incorpore a responsabilidade social, ambiental e económica, em prol de um desenvolvimento global mais sustentável. As grandes empresas já iniciaram e continuam este processo de mudança, desenvolvendo medidas e estratégias neste sentido. Porém, apesar de representarem o grosso do tecido empresarial, as Pequenas e Médias Empresas só agora começam a dar os primeiros passos em direção a uma gestão mais ponderada ambiental e energeticamente. Com este trabalho pretende-se reunir informação relativa às Pequenas e Médias Empresas portuguesas de forma a compreender quais as principais áreas de atuação, as medidas que poderão ser implementadas e, consolidar o ponto de situação deste sector acerca dos vários temas ao nível do meio ambiente e da energia. Para tal, foram realizados levantamentos energéticos e aplicado um questionário acerca dos comportamentos e práticas ambientais. Verificou-se que apesar da grande maioria das empresas analisadas já terem ponderado a importância e as vantagens da eficiência energética, ainda são poucas as organizações que têm implementados planos, estratégias ou instrumentos para melhoria do seu desempenho ambiental e energético.

Einsatz von Fret-Flim zur Beobachtung von Protein-Protein Wechselwirkungen in lebenden Zellen : Einblicke in Interaktionen des präsynaptischen Proteins Bassoon

FRET, FLIM, living cells, hippocampal neurons, synapses, space and time resolved spectroscopy

Die Rolle der Photovoltaik in der elektrischen Energieversorgung von Bangladesch : Bestandsaufnahme und Szenarien der zukünftigen Entwicklung aus technischer Sicht unter ergänzender qualitativer Berücksichtigung von ökonomischen und ökologischen Randbedingungen

Zugang zu verlässlicher und bezahlbarer elektrischer Energie für jeden Bürger, das ist das erklärte Ziel der Regierung von Bangladesch. Von den 154 Millionen Einwohnern des Landes sind bisher nur etwa 55% an das Stromnetz angeschlossen, im dem schon seit vielen Jahren ein chronischer Energieengpass herrscht. Bangladesch strebt für die Zukunft ein Wirtschaftswachstum von bis zu 9% pro Jahr an, was eine drastische Steigerung des Energiebedarfs zur Folge haben wird. Dieser soll primär durch fossile Energieträger, insbesondere durch die landeseigenen Gas- und Kohlereserven gedeckt werden. Auch der Einstieg in die Atomenergie ist geplant. Derzeit werden über 97% der netzgebundenen elektrischen Energie aus nicht regenerativen Energien gewonnen. Bei der nicht netzgebundenen Versorgung überwiegen die erneuerbaren Energien mit mehr als 86%.Die vorliegende Diplomarbeit untersucht das Potential der Photovoltaik in Bangladesch, der von allen regenerativen Energien dort das größte Potential zugeschrieben wird. Auch wenn das vom Monsun und von hohen Temperaturen geprägte Klima keine optimalen Bedingungen für die Nutzung von Photovoltaik bietet, versprechen Jahresglobalstrahlungssummen von mehr als 1.800 kWh/m² sehr gute Erträge. Die geografisch günstige Lage ermöglicht Flächennutzungsgrade von 1:1,4. Damit ist auf einer für Bangladesch ermittelten Fläche von 2.509 km² die Installation von Solarmodulen mit einer Leistung von 36,7 GW möglich, was umgerechnet 277 GWp entspricht. Dünnschichtmodule liefern wegen ihrer geringen Temperaturempfindlichkeit die besten Erträge von fast 1.400 kWh/kWp im Jahr, kristalline Zellen liefern dagegen auf den m² bezogen die besten Erträge von mehr als 260 kWh/m². In Deutschland liefert eine vergleichbare Anlage mindestens 20% weniger Ertrag. (...)

Erarbeitung der Grundlagen zur Einführung eines Energiemanagementsystems in der GKN Stromag Dessau GmbH sowie Auswahl einer geeigneten Softwarelösung auf Grundlage einer Nutzwertanalyse

Thema dieser Ausarbeitung ist die Erarbeitung von Grundlagen zur Einführung eines Energiemanagementsystems, in der GKN Stromag Dessau GmbH, sowie die Auswahl einer geeigneten Softwarelösung, auf Grundlage einer Nutzwertanalyse. Um eine geeignete Software Lösung zu finden, wurde eine IST-Analyse des Betriebes durchgeführt und die nutzerspezifischen Anforderungen an die Software definiert. Dies ist in zwei Stufen erfolgt. In der ersten Phase wurden im Rahmen eines K.O. Systems grobe Kriterien definiert, welche die Software aufweisen muss.In der zweiten Phase wurden die verbliebenen Systeme einer Nutzwertanalyse unterzogen, um die bestmögliche Alternative zu ermitteln. Die drei besten, durch die Analyse ermittelten, Anbieter sind namentlich:- IngSoft InterWatt- My JEVis 2.1- ABB cpmPlus Energie Manager.Weiterführend wurde ein Phasenplan, für die geschätzte Einführungsdauer des Energiemanagementsystems, erstellt. Die geschätzte Einführungsdauer liegt bei 18,39 Monaten. Zusätzlich spricht diese Arbeit Empfehlungen, für die möglichen Vernetzungsmöglichkeiten von Zählern und Software, aus. Zur Umsetzung des Energiemanagementsystems wurde ein Pflichtenheft erstellt, welches die Verfahrensweisen innerhalb des Energiemanagementsystems regelt.

Chronique d'une controverse annoncée. Le récit d'urbanisme à l'heure du développement urbain durable

Ce rapport interroge l'émergence de l'agriculture comme nouvelle figure de ce que B. Secchi a appelé le « récit d'urbanisme ». Après avoir rappelé les rapports toujours-déjà controversés de l'urbain au rural, les auteurs s'intéressent à la manière dont différents acteurs mobilisent la nature et l'agriculture pour mettre en récit l'espace urbain, raconter la ville à venir - celle qui devrait voir le jour pour satisfaire à la doxa du développement urbain durable - et produire du consensus dans la production du territoire. L'analyse d'une controverse d'aménagement, celle relative au déclassement d'une parcelle de 58 hectares de zone agricole dans le canton de Genève (Suisse) pour construire 3000 logements ainsi que divers équipements collectifs, permet d'accomplir une généalogie de ce nouveau discours urbanistique. Pour ce faire, quatre types de sources sont mobilisés : des entretiens semi-directifs ; des documents d'urbanisme ; le matériau récolté lors d'une observation participante non déclarée ; la documentation produite à l'occasion de la campagne référendaire liée au déclassement de la parcelle en question ainsi que les commentaires produits sur les différents forums électroniques ouverts à cette occasion. L'analyse permet de dégager trois temps, qui sont trois figures du récit d'urbanisme : la genèse du plan directeur comme épopée d'un territoire (histoire des plans directeurs genevois); le plan de quartier comme roman (observation d'un collectif au travail pour produire un plan d'aménagement approprié à un site et à un programme); les contre-récits d'une controverse (le développement d'une campagne référendaire). La prosopopée du développement urbain durable apparaît ainsi comme une production éminemment intertextuelle et rhizomique - au sens de G. Deleuze et F. Guattari -, inscrite dans un mode de citation des différents produits de cette machine à produire des connaissances qu'est la pratique urbanistique. Au final, l'analyse au long cours proposée ici permet de réfléchir à la nature de cette activité supposément technique et politique qu'est l'urbanisme. Il se pourrait en effet que faire la ville consiste tout naturellement à faire des histoires...

Perspectives on the green construction of the new European Energy Policy

The EU has been one of the main actors involved in the construction process of an international climate change regime, adopting it as an identity sign in the international arena. This activism has reverted in the European political agenda and in the one of its Members States. Therefore, climate change has become a driver for the EU growing participation in energy policy and for its governance evolution. In this context, much attention has been paid to the climate and energy policies integration agreed after the 2007 spring European Council. Apparently, this decision meant a decisive step towards the incorporation of the environmental variable in the energy policy-making. Moreover, the Action Plan [2007-2009] “Energy Policy for Europe” outlined priority actions in a variety of energy-related areas, implying the new European Energy Policy commencement. Against this background, there is still much left to understand about its formulation and its further development. Rooted on the Environmental Policy Integration approach, this paper traces the increasing proximity between environment and energy policies in order to understand the green contribution to the European Energy Policy construction.