Wedges and plate-bandes: mechanical theories after De la Hire

Plate-bandes are straight masonry arches (they are called, also, flat arches or lintel arches). Ideally they have the surfaces of extrados and intrados plane and horizontal. The stones or bricks have radial joints converging usually in one centre. The voussoirs have the form of wedges and in French they are called "claveaux". A plate-bande is, in fact, a lintel made of several stones and the proportions of lintels and plate-bandes are similar. Proportions of plate-bandes, that is the relationship between the thickness t and the span s (t/s)varies, typically between 1/4–1/3 in thick plate-bandes, and is less than 1/20 in the most slender ones. A ratio of circa 1/8 was usual in the 18th Century and follows a simple geometrical rule: the centre form with the intrados an equilateral triangle and the plate-bande should contain an arc of circle. The joints are usually plane, but in some cases present a «rebated» or «stepped» form. Plate-bandes exert an inclined thrust as any masonry arch. This thrust is usually very high and it requires either massive buttresses, or to be built in the middle of thick walls. Master builders and architects have tried since antiquity to calculate the abutment necessary for any arch. A modern architect or engineer will measure the arch thrust in units of force, kN or tons. Traditionally, the thrust has been measured as the size of the buttresses to resist it safely. Old structural rules, then, addressed the design problem establishing a relationship between the span and the depth of the buttress. These were empirical rules, particular for every type of arch or structure in every epoch. Thus, the typical gothic buttress is 1/4 of the vault span, but a Renaissance or baroque barrel vault will need more than 1/3 of the span. A plate-bande would require more than one half of the span; this is precisely the rule cited by the French engineer Gautier, who tried unsuccessfully to justify it by static reasons. They were used, typically, to form the lintels of windows or doors (1-2 m, typically); in Antiquity they were used, also, though rarely, at the gates of city walls or in niches (ca. 2 m, reaching 5.2 m). Plate-bandes may show particular problems: it is not unusual that some sliding of the voussoirs can be observed, particularly in thick plate-bandes. The stepped joints on Fig. 1, left, were used to avoid this problem. There are other «hidden» methods, like iron cramps or the use of stone wedges, etc. In seismic zones these devices were usual. Another problem relates to the deformation; a slight yielding of the abutments, or even the compression of the mortar joints, may lead to some cracking and the descent of the central keystone. Even a tiny descent will convert the original straight line of the intrados in a broken line with a visible «kink» or angle in the middle. Of course, both problems should be avoided. Finally, the wedge form of the voussoirs lead to acute angles in the stones and this can produce partial fractures; this occurs usually at the inferior border of the springers at the abutments. It follows, that to build a successful plate-bande is not an easy matter. Also, the structural study of plate-bandes is far from simple, and mechanics and geometry are related in a particular way. In the present paper we will concentrate on the structural aspects and their constructive consequences, with a historical approach. We will outline the development of structural analysis of plate-bandes from ca. 1700 until today. This brief history has a more than purely academic interest. Different approaches and theories pointed to particular problem, and though the solution given may have been incorrect, the question posed was often pertinent. The paper ends with the application of modern Limit Analysis of Masonry Structures, developed mainly by professor Heyman in the last fifty years. The work aims, also, to give some clues for the actual architect and engineer involved in the analysis or restoration of masonry buildings.

Clones Identification and Genetic Characterization of Garnacha Grapevine by Means of Different PCR-Derived Marker Systems

This study uses PCR-derived marker systems to investigate the extent and distribution of genetic variability of 53 Garnacha accessions coming from Italy, France and Spain. The samples studied include 28 Italian accessions (named Tocai rosso in Vicenza area; Alicante in Sicily and Elba island; Gamay perugino in Perugia province; Cannonau in Sardinia), 19 Spanish accessions of different types (named Garnacha tinta, Garnacha blanca, Garnacha peluda, Garnacha roja, Garnacha erguida, Garnacha roya) and 6 French accessions (named Grenache and Grenache noir). In order to verify the varietal identity of the samples, analyses based on 14 simple sequence repeat (SSR) loci were performed. The presence of an additional allele at ISV3 locus (151 bp) was found in four Tocai rosso accessions and in a Sardinian Cannonau clone, that are, incidentally, chimeras. In addition to microsatellite analysis, intravarietal variability study was performed using AFLP, SAMPL and M-AFLP molecular markers. AFLPs could discriminate among several Garnacha samples; SAMPLs allowed distinguishing few genotypes on the basis of their geographic origin, whereas M-AFLPs revealed plant-specific markers, differentiating all accessions. Italian samples showed the greatest variability among themselves, especially on the basis of their different provenance, while Spanish samples were the most similar, in spite of their morphological diversity.

Kitāb Mukālamāt ʻArabīyah : manuscript, [ca. 1783]

المقالة الأولى في حروف العربية ووضعهم في الكلام أول ذلك علىيد اليمين على جانب الشمال... :Incipit

Controlled ‘Europeanisation’? The KMW–Nexter merger and the Germany’s new strategy for the arms industry. OSW COMMENTARY NUMBER 180/26.08.2015

On 29 July a deal was signed in Paris concerning a merger between Krauss-Maffei Wegmann (KMW), Germany’s largest manufacturer of tanks, infantry fighting vehicles and artillery systems, and its French counterpart Nexter. The new holding formed as a result of the merger will be Europe’s largest producer of arms systems for land forces, comparable to the Airbus Group in the aerospace industry. While work on finalising the merger was underway, the German government was developing a new strategy for Germany’s arms industry, which was published on 9 June 2015. The strategy’s provisions show that German politicians, despite holding negative opinions on previous mergers between German arms companies and foreign businesses, have concluded that consolidation at the European level is nonetheless the only way to go. However, the strategy also states that the German government should exercise more influence than previously on the terms and conditions of any such consolidation. To this end, it identified key national technologies which will be supported and protected through various instruments, including also the conclusion of intergovernmental agreements on strategic defence co-operation. Such agreements may regulate questions such as the ownership structures of the new companies, the locations for developing technologies and for manufacturing products, subcontractors and exports of jointly developed arms and military equipment. In relation to the KMW–Nexter merger, such a deal between France and Germany is expected to be signed this autumn.

Documents relative to the colonial history of the state of New-York : procured in Holland, England, and France /

Includes index.

French fiction of to-day,

Mode of access: Internet.

French & Italian alumni newsletter /

Latest issue consulted: Vol. 15 [i.e. v. 18] (summer 2004).

Public and private life of animals /

Adapted in abbreviated form from the French edition, originally compiled and edited by P.J. Hetzel with many contributions by himself.

Illuminated illustrations of Froissart : selected from the MS. in the Biblioth'eque Royale, Paris, and from other sources /

With descriptive letterpress.

The glory of America; comprising memoirs of the lives and glorious exploits of some of the distinguished officers engaged in the late war with Great Britain ...

"Sketches of persons who acted only in the revolution, or in that and the French war": p. 470-573.

How the French boy learns to write; a study in the teaching of the mother tongue,

Bibliography: p. 243-245.

How peripheral a phenomenon is it?: On the interaction of DP-internal ellipsis, degree inversion, and islands

Thesis (Ph.D.)--University of Washington, 2016-06

Myths and Truths: The "Law and Finance Theory" Revisited

The law and finance theory identifies two dominating legal traditions, a common law tradition inherited from England, and a civil law tradition that is going back to 19th century codifications in France, Germany and Scandinavia. Another key notion of the theory is the distinction between insiders (stakeholders, "the State") and outsiders (shareholders as well as creditors). The micro foundation of this approach is the willingness to invest. The innovative addition of the law and finance theory to these ideas lies in the way it combines them with its peculiar view on legal history. The innovative addition of the law and finance theory to these ideas lies in the way it combines them with its peculiar view on legal history. The major conclusion of this theory is that the common law system provides the best basis for financial development and economic growth, followed by Scandinavian and German origin civil law and finally French origin civil law.

Leisure at work in Britain, West Germany, France and Japan : a cross-cultural comparative study

The aim of this thesis was to investigate the impact of changing values and attitudes toward work and the workplace in Britain, West Germany, France and Japan. A cross-national approach was adopted in order to gain a better understanding of differences and similarities in behaviour and to identify aspects specific to each society. Although the relationship between work and leisure has been thoroughly examined and there is a growing body of literature on changes in the values associated with these two phenomena, little research has been carried out into leisure at work. Studies of work time have tended to consider it as a homogeneous block, whereas recent research suggests that more attention should be devoted to unravelling the multiple uses of time at the workplace. The present study sought to review and analyse this new approach to the study of work time, and special attention is devoted to an examination of definitions of leisure, recreation, free time and work within the context of the workplace. The cross-cultural comparative approach gave rise to several problems due to the number of countries involved and the unusual combination of factors being investigated. The main difficulties were differences in the amount and quality of literature available, the non-comparability of existing data, definitions of concepts and socio-linguistic terms, and problems over access to organizations for fieldwork. Much of the literature generalizes about patterns of behaviour and few authors isolate factors specific to particular societies. In this thesis new empirical work is therefore used to ascertain the extent to which generalizations can be made from the literature and characteristics peculiar to each of the four countries identified. White-collar employees in large, broadly comparable companies were studied using identical questionnaires in the appropriate language. Respondents selected were men and women, aged between 20-65 years and either managers or non-managers. Patterns of leisure at work were found to be broadly similar in the national contexts, but with the Japanese and the West Germans experiencing the least leisure at work, and the British and the French perceiving the most. The general trend seems to be toward convergence of attitudes regarding leisure at work in the four countries. Explanations for variations in practice were sought within the wider societal contexts of each country.