969 resultados para DISTRIBUTION RANGE
Resumo:
Previous investigations from our laboratory showed that the genomes of plants, like those of vertebrates, are mosaics of isochores, i.e., of very long DNA segments that are compositionally homogeneous and that can be subdivided into a small number of families characterized by different GC levels (GC is the mole fraction of guanine+cytosine). Compositional DNA fractions corresponding to different isochore families were used to investigate, by hybridization with appropriate probes, the gene distribution in vertebrate genomes. Here we report such a study on the genome of a plant, maize. The gene distribution that we found is most striking, in that almost all genes are present in isochores covering an extremely narrow (1-2%) GC range and only representing 10-20% of the genome. This gene distribution, which seems to characterize other Gramineae as well, is remarkably different from the gene distribution previously found in vertebrate genomes.
Resumo:
We analyzed the geographic distribution of the Ixodes ricinus-like ticks in eastern North America by comparing the mitochondrial 16S rDNA sequences of specimens sampled directly from the field during the 1990s. Two distinct lineages are evident. The southern clade includes ticks from the southeastern and middle-eastern regions of the United States. The range of the northern clade, which appears to have been restricted to the northeastern region until the mid-1900s, now extends throughout the northeastern and middle-eastern regions. These phyletic units correspond to northern and southern taxa that have previously been assigned specific status as Ixodes dammini and Ixodes scapularis, respectively. The expanding range of I. dammini appears to drive the present outbreaks of zoonotic disease in eastern North America that include Lyme disease and human babesiosis.
Resumo:
Analysis of vibrations and displacements is a hot topic in structural engineering. Although there is a wide variety of methods for vibration analysis, direct measurement of displacements in the mid and high frequency range is not well solved and accurate devices tend to be very expensive. Low-cost systems can be achieved by applying adequate image processing algorithms. In this paper, we propose the use of a commercial pocket digital camera, which is able to register more than 420 frames per second (fps) at low resolution, for accurate measuring of small vibrations and displacements. The method is based on tracking elliptical targets with sub-pixel accuracy. Our proposal is demonstrated at a 10 m distance with a spatial resolution of 0.15 mm. A practical application over a simple structure is given, and the main parameters of an attenuated movement of a steel column after an impulsive impact are determined with a spatial accuracy of 4 µm.
Resumo:
The wide range of morphological variations in the “loxurina group” makes taxa identification difficult, and despite several reviews, serious taxonomical confusion remains. We make use of DNA data in conjunction with morphological appearance and available information on species distribution to delimit the boundaries of the “loxurina” group species previously established based on morphology. A fragment of 635 base pairs within the mtDNA gene cytochrome oxidase I (COI) was analysed for seven species of the “loxurina group”. Phylogenetic relationships among the included taxa were inferred using maximum parsimony and maximum likelihood methods. Penaincisalia sigsiga (Bálint et al), P. cillutincarae (Draudt), P. atymna (Hewitson) and P. loxurina (C. Felder & R. Felder) were easily delimited as the morphological, geographic and molecular data were congruent. Penaincisalia ludovica (Bálint & Wojtusiak) and P. loxurina astillero (Johnson) represent the same entity and constitute a sub-species of P. loxurina. However, incongruence among morphological, genetic, and geographic data is shown in P. chachapoya (Bálint & Wojtusiak) and P. tegulina (Bálint et al). Our results highlight that an integrative approach is needed to clarify the taxonomy of these neotropical taxa, but more genetic and geographical studies are still required.
Resumo:
Analysis of vibrations and displacements is a hot topic in structural engineering. Although there is a wide variety of methods for vibration analysis, direct measurement of displacements in the mid and high frequency range is not well solved and accurate devices tend to be very expensive. Low-cost systems can be achieved by applying adequate image processing algorithms. In this paper, we propose the use of a commercial pocket digital camera, which is able to register more than 420 frames per second (fps) at low resolution, for accurate measuring of small vibrations and displacements. The method is based on tracking elliptical targets with sub-pixel accuracy. Our proposal is demonstrated at a 10 m distance with a spatial resolution of 0.15 mm. A practical application over a simple structure is given, and the main parameters of an attenuated movement of a steel column after an impulsive impact are determined with a spatial accuracy of 4 µm.
Resumo:
We investigated surface waves guided by the boundary of a semi-infinite layered metal-dielectric nanostructure cut normally to the layers and a semi-infinite dielectric material. Using the Floquet-Bloch formalism, we found that Dyakonov-like surface waves with hybrid polarization can propagate in dramatically enhanced angular range compared to conventional birefringent materials. Our numerical simulations for an Ag-GaAs stack in contact with glass show a low to moderate influence of losses.
Resumo:
Gasoline coming from refinery fluid catalytic cracking (FCC) unit is a major contributor to the total commercial grade gasoline pool. The contents of the FCC gasoline are primarily paraffins, naphthenes, olefins, aromatics, and undesirables such as sulfur and sulfur containing compounds in low quantities. The proportions of these components in the FCC gasoline invariable determine its quality as well as the performance of the associated downstream units. The increasing demand for cleaner and lighter fuels significantly influences the need not only for novel processing technologies but also for alternative refinery and petrochemical feedstocks. Current and future clean gasoline requirements include increased isoparaffins contents, reduced olefin contents, reduced aromatics, reduced benzene, and reduced sulfur contents. The present study is aimed at investigating the effect of processing an unconventional refinery feedstock, composed of blend of vacuum gas oil (VGO) and low density polyethylene (LDPE) on FCC full range gasoline yields and compositional spectrum including its paraffins, isoparaffins, olefins, napthenes, and aromatics contents distribution within a range of operating variables of temperature (500–700 °C) and catalyst-feed oil ratio (CFR 5–10) using spent equilibrium FCC Y-zeolite based catalyst in a FCC pilot plant operated at the University of Alicante’s Research Institute of Chemical Process Engineering (RICPE). The coprocessing of the oil-polymer blend led to the production of gasoline with very similar yields and compositions as those obtained from the base oil, albeit, in some cases, the contribution of the feed polymer content as well as the processing variables on the gasoline compositional spectrum were appreciated. Carbon content analysis showed a higher fraction of the C9–C12 compounds at all catalyst rates employed and for both feedstocks. The gasoline’s paraffinicity, olefinicity, and degrees of branching of the paraffins and olefins were also affected in various degrees by the scale of operating severity. In the majority of the cases, the gasoline aromatics tended toward the decrease as the reactor temperature was increased. While the paraffins and iso-paraffins gasoline contents were relatively stable at around 5 % wt, the olefin contents on the other hand generally increased with increase in the FCC reactor temperature.
Resumo:
The moisture content and its spatial distribution has a great influence on the durability properties of concrete structures. Several non-destructive techniques have been used for the determination of the total water content, but moisture distribution is difficult to determine. In this paper impedance spectroscopy is used to study the water distribution in concrete samples with controlled and homogeneously distributed moisture contents. The technique is suitable for the determination of water distribution inside the sample, using the appropriate equivalent circuits. It is shown that using the selected drying procedures there is no change in the solid phase of the samples, although the technique can only be used for the qualitative study of variations in the solid phase when samples are too thick. The results of this work show that for a wide range of concrete percentages of saturation, from full to 18 % saturation, practically all the pores keep at least a thin layer of electrolyte covering their walls, since the capacitance measurement results are practically independent of the saturation degree.
Resumo:
This layer is a georeferenced raster image of the historic paper map entitled: Map of the city of New Orleans : showing proposed water distribution system, [by] Sewerage and Water Board New Orleans, LA.; Geo. G. Earl, genl. sup't. It was published by the Sewerage and Water Board New Orleans in 1902. Scale [ca. 1:50,900]. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Louisiana State Plane Coordinate System, South NAD83 (in Feet) (Fipszone 1702). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows water distribution features such as existing and proposed water mains (with sizes), suction pipes, and water purification station sites. Also shows other features such as roads, canals, levees, drainage, cemeteries, Parish boundaries, and more. Shaded to show built-up and unbuilt areas for construction. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.
Resumo:
Psephitic particles in the region of the Iceland-Faeroe-Ridge have been transported and deposited by means of a complex interplay of glacier movements and drifting icebergs. The composition of the particle association is controlled by the sedimentation of basaltic rock particles derived from the ridge itself and, in addition to that and in southern parts of the ridge, from the Faeroe Islands, the Faeroe-Bank and the Bill Baileys-Bank. Besides, there are crystalline and sedimentary dropstones showing a very varied petrography and a wide range of particle sizes. Their percentage becomes greater as the distance from the ridge increases. The association of dropstones is relatively homogeneous in the region of the ridge and only at greater distances from the ridge it becomes more differentiated. Owing to their composition and distribution, as well as on the basis of characteristic fossils and rock types, the drop-stones are derived from Scandianvia and Great Britain. During periods of maximum glaciation, the Icland-Faeroe-Ridge, th eFaeroe-Bank and the Bill Baileys-Bank were under ice.
Resumo:
Deep-water benthic ostracodes from the Pliocene-Pleistocene interval of ODP Leg 107, Hole 654A (Tyrrhenian Sea) were studied. From a total of 106 samples, 40 species considered autochthonous were identified. Detailed investigations have established the biostratigraphic distribution of the most frequent ostracode taxa. The extinction levels of Agrenocythere pliocenica (a psychrospheric ostracode) in Hole 654A and in some Italian land sections lead to the conclusion that the removal of psychrospheric conditions took place in the Mediterranean Sea during or after the time interval corresponding to the Small Gephyrocapsa Zone (upper part of early Pleistocene), and not at the beginning of the Quaternary, as previously stated. Based on a reduced matrix of quantitative data of 63 samples and 20 variables of ostracodes, four varimax assemblages were extracted by a Q-mode factor analysis. Six factors and eight varimax assemblages were recognized from the Q-mode factor analysis of the quantitative data of 162 samples and 47 variables of the benthic foraminifers. The stratigraphic distributions of the varimax assemblages of the two faunistic groups were plotted against the calcareous plankton biostratigraphic scheme and compared in order to trace the relationship between the benthic foraminifers and ostracodes varimax assemblages. General results show that the two populations, belonging to quite different taxa, display almost coeval changes along the Pliocene-Pleistocene sequence of Hole 654A, essentially induced by paleoenvironmental modifications. Mainly on the base of the benthic foraminifer assemblages (which are quantitatively better represented than the ostracode assemblages), it is possible to identify such modifications as variations in sedimentation depth and in bottom oxygen content.
Resumo:
Five short cores sub-sampled from box cores from three sites in the eastern Weddell Sea off Antarctica and in the eastern Pacific off southern California, covering a range in water depth from 500 to 2000 m, were analysed for the down-core distribution of live (stained with Rose Bengal) and dead benthic foraminifera. In the California continental borderland, Planulina ariminensis, Rosalina columbiensis and Trochammina spp. live attached to agglutinated polychaetes tubes that rise above the sedimentwater interface. Bolivina spissa lives exclusively in or on the uppermost sediment. Stained specimens of Chilostomella ovoidea are found down to 6 cm within the sediment and specimens of Globobulimina pacifica down to a maximum of 8 cm. Delta13C values of live G. pacifica decrease with increasing depth from the sediment surface down to 7 cm core depth, indicating that this infaunal species utilizes13C-depleted carbon from pore waters. In the dead, predominantly calcareous benthic forminiferal assemblage, selective dissolution of small delicate tests in the upper sediment column causes a continuous variation in species proportions. In the eastern Weddell Sea, the calcareous Bulimina aculeata lives in a carbonate corrosive environment exclusively in or on the uppermost sediment. The arenaceous Cribrostomoides subglobosum, Recurvoides contortus and some Reophax species are frequently found within the top 4 cm of the sediment, whereas stained specimens of Haplophragmoides bradyi, Glomospira charoides and Cribrostomoides wiesneri occur in maximum abundance below the uppermost 1.5 cm. Species proportions in the dead, predominantly arenaceous, benthic foraminiferal assemblage change in three distinct steps. The first change is caused by calcite dissolution at the sediment-water interface, the second coincides with the lower boundary of intense bioturbation, and the third results from the geochemical shift from oxidizing to reducing conditions below a compacted ash layer.
Resumo:
Living and dead benthic Foraminifera of 26 sediment surface samples from the East Atlantic continental margin (off Portugal) are studied. The stations are located on two profiles off Cape Mondego and off Cape Sines, ranging in water depth from 45 to 3905 meters. The highest values of standing crop are on the shelf (200 m) (up to 420 specimens/10 cm**3). Below 1000 m water depth standing crop is low (5 -24 specimens/10 cm**3). 151species and species groups are distinguished. Most of the living species do occur in a wide depth range. Faunal depth boundaries are at 50/100m, at 600/800 m, and at 1000 m. Results published from the North Atlantic and the East Mediterranean do not differ from those obtained in samples off Portugal. Depth of water (e.g. hydrostatic pressure) or another factor being controlled by depth (e.g. limitation of food supply) seems to be the most important factor of the benthic foraminiferal distribution.
Resumo:
Pleistocene summer sea-surface temperatures (SSST) have been reconstructed on a composite core section recovered in the Subantarctic Zone of the Southern Ocean from planktonic foraminifers applying the Modern Analog Technique. The composite consists of Core PS2489-2 and the sections recovered at ODP Site 1090, and documents the last 1.83 Ma. Three distinct climatic periods can be identified that mirror the Pleistocene development of the Southern Ocean hydrography. Cold climatic conditions prevailed at 43°S during glacial as well as during interglacial periods during the early Pleistocene (1.83-0.87 Ma), indicating a northward shift of isotherms that characterize the present-day Polar Front Zone by about 7° of latitude. Evidence shows a strong linkage between Southern Ocean and low latitude climate during that interval time. Between the Mid-Pleistocene Revolution (ca. 0.9 Ma) and the Mid-Brunhes Event (ca. 0.4 Ma), we observe higher amplitude fluctuations in the SSST between glacial and interglacial periods, corresponding to the temperature range between the present Polar Front and Subantarctic Front. These climatic variations have been related to changes in the northern hemisphere ice sheets. The past 0.4 Ma are characterized by strong SSST variations, of up to 8°C, between glacials and interglacials. Only during the climatic optima (stages 11.3, 9.3, 7.5, 7.1, 5.5, and the early Holocene), SSST exceeded present SSST at the core locality (10.2°C). Although the carbonate dissolution record exhibits high variability during the Pleistocene, it can be shown that SSST estimates were not significantly biased. The Mid-Brunhes dissolution cycle as well as the Mid-Pleistocene enhanced carbonate preservation appear to belong to a global long-term variability in carbonate preservation.
Resumo:
Cores from the Atlantic Ibero-Moroccan continental rise and slope contain fine-grained Late Pleistocene and Holocene sediments. These young sediments cover the continental margin in large lensformed litho- and biostratigraphically well-defined units. The total sedimentation rates range from 4 cm/ 1000 yrs. to 27 cm/1000 yrs. off Portugal and from 6 cm/1000 yrs. to 14 cm/1000 yrs. off Morocco. Only a small proportion of these sediments usually consists of sand-sized particles (>0.063 mm) which are mostly dominated by foraminifera. Both planktonic and benthic foraminifera are much more abundant in Late Pleistocene and Holocene samples from the upper slope in comparison to those from the deeper slope and from the abyssal plains. Total sedimentation rates during cool and warm climatic stages are rather similar for both groups of foraminifera. For example, in Late Holocene sediments 7 x 10**3 benthic and 201 x 10**3 planktonic foraminifera (fraction 0.63 -0.20 mm) per 100 cm**2 and 1000 yrs. are preserved in the Tagus, 10-19 X 10**3 benthic and about 1.3 X 10**6 planktonic foraminifera are preserved in the Seine abyssal plain sediments. Values from the upper slope sediments are higher for benthic foraminifera by a factor of 60 off Portugal and 60 to 70 off Morocco. The values for planktonic ones differ by factors of 6-12 and 6 respectively. These numbers seem to reflect differences in production and preservation. Production rates of planktonic foraminifera generally seem to be somewhat higher during Holocene than during Late Pleistocene, and the rates of benthic foraminifera appear rather higher during Late Pleistocene than during Holocene.