Sorption and desorption of sulfuryl fluoride by wheat, flour and semolina

Sulfuryl fluoride (SF) has been developed as a fumigant for control of insect pests in stored grain. However, there is very limited information on the sorption behaviour of this fumigant, which can be critical to its bioactivity, application and potential for residues. We undertook a comprehensive laboratory study of the sorption and desorption of SF by wheat (bread and durum), flour and semolina at 15, 25 and 35 °C, moisture contents 12% and 15%, and concentration × time combinations at CT = 1500 mgh/L (4.167 mg/L × 360 h, 8.928 mg/L × 168 h and 31.25 mg/L × 48 h). At each dosage, sorption rate increased as commodity temperature and moisture content increased. The highest rates of sorption occurred at 35 °C and 15% m.c., and lowest rates at 15 °C and 12% m.c., and the rate was independent of initial concentration. Sorption followed first order reaction kinetics described by the exponential decay equation, Ct = C0·e−k*t, where k is the sorption rate constant. The most important factors determining the rate of sorption were commodity particle size (exposed surfaces) and temperature. Little sorption of fumigant occurred within the first 24 h whereas longer fumigation times resulted in significant sorption. Unbound SF was rapidly lost from the commodity upon aeration with no further desorption detected under any of the test conditions.

Viivesietoisten verkkojen nykytila ja tulevaisuuden haasteet

Delay and disruption tolerant networks (DTNs) are computer networks where round trip delays and error rates are high and disconnections frequent. Examples of these extreme networks are space communications, sensor networks, connecting rural villages to the Internet and even interconnecting commodity portable wireless devices and mobile phones. Basic elements of delay tolerant networks are a store-and-forward message transfer resembling traditional mail delivery, an opportunistic and intermittent routing, and an extensible cross-region resource naming service. Individual nodes of the network take an active part in routing the traffic and provide in-network data storage for application data that flows through the network. Application architecture for delay tolerant networks differs also from those used in traditional networks. It has become feasible to design applications that are network-aware and opportunistic, taking an advantage of different network connection speeds and capabilities. This might change some of the basic paradigms of network application design. DTN protocols will also support in designing applications which depend on processes to be persistent over reboots and power failures. DTN protocols could also be applicable to traditional networks in cases where high tolerance to delays or errors would be desired. It is apparent that challenged networks also challenge the traditional strictly layered model of network application design. This thesis provides an extensive introduction to delay tolerant networking concepts and applications. Most attention is given to challenging problems of routing and application architecture. Finally, future prospects of DTN applications and implementations are envisioned through recent research results and an interview with an active researcher of DTN networks.

Copy of bill of exchange of Haym Salomon and letter regarding the same

Digital image

Applying urban morphology theory to design practice

The aim of this paper is to investigate the relationship between research and design through an applied example of how architects can approach the design for a building guided by data derived from morphological research. An Expert Focus Group consisting of nine leading architects and urban designers from Brisbane, Australia was given the task of testing this proposition. Analysis of the workshop outcomes are examined, and the design drawings of each participant are assessed to determine the relative congruence of the design proposals within the morphological commodity of the specific context. In addition, qualitative data, captured through verbal and written feedback is assessed highlighting the participants' observations and experiences of the workshop. This paper makes a contribution to the current debate within the field on the opportunities of integrating research with practice.

Optimal multicommodity flow through the complete graph with random edge capacities

We consider a multicommodity flow problem on a complete graph whose edges have random, independent, and identically distributed capacities. We show that, as the number of nodes tends to infinity, the maximumutility, given by the average of a concave function of each commodity How, has an almost-sure limit. Furthermore, the asymptotically optimal flow uses only direct and two-hop paths, and can be obtained in a distributed manner.

Bandwidth management in a hybrid wireless network: For superstore applications

The integration of different wireless networks, such as GSM and WiFi, as a two-tier hybrid wireless network is more popular and economical. Efficient bandwidth management, call admission control strategies and mobility management are important issues in supporting multiple types of services with different bandwidth requirements in hybrid networks. In particular, bandwidth is a critical commodity because of the type of transactions supported by these hybrid networks, which may have varying bandwidth and time requirements. In this paper, we consider such a problem in a hybrid wireless network installed in a superstore environment and design a bandwidth management algorithm based on the priority level, classification of the incoming transactions. Our scheme uses a downlink transaction scheduling algorithm, which decides how to schedule the outgoing transactions based on their priority level with efficient use of available bandwidth. The transaction scheduling algorithm is used to maximize the number of transaction-executions. The proposed scheme is simulated in a superstore environment with multi Rooms. The performance results describe that the proposed scheme can considerably improve the bandwidth utilization by reducing transaction blocking and accommodating more essential transactions at the peak time of the business.

Believe it or Not! Multicore CPUs can Match GPUs for FLOP-intensive Applications

In this work, we evaluate performance of a real-world image processing application that uses a cross-correlation algorithm to compare a given image with a reference one. The algorithm processes individual images represented as 2-dimensional matrices of single-precision floating-point values using O(n4) operations involving dot-products and additions. We implement this algorithm on a nVidia GTX 285 GPU using CUDA, and also parallelize it for the Intel Xeon (Nehalem) and IBM Power7 processors, using both manual and automatic techniques. Pthreads and OpenMP with SSE and VSX vector intrinsics are used for the manually parallelized version, while a state-of-the-art optimization framework based on the polyhedral model is used for automatic compiler parallelization and optimization. The performance of this algorithm on the nVidia GPU suffers from: (1) a smaller shared memory, (2) unaligned device memory access patterns, (3) expensive atomic operations, and (4) weaker single-thread performance. On commodity multi-core processors, the application dataset is small enough to fit in caches, and when parallelized using a combination of task and short-vector data parallelism (via SSE/VSX) or through fully automatic optimization from the compiler, the application matches or beats the performance of the GPU version. The primary reasons for better multi-core performance include larger and faster caches, higher clock frequency, higher on-chip memory bandwidth, and better compiler optimization and support for parallelization. The best performing versions on the Power7, Nehalem, and GTX 285 run in 1.02s, 1.82s, and 1.75s, respectively. These results conclusively demonstrate that, under certain conditions, it is possible for a FLOP-intensive structured application running on a multi-core processor to match or even beat the performance of an equivalent GPU version.

Efficient Algorithms for Combinatorial Auctions with Volume Discounts Arising in Web Service Composition

Web services are now a key ingredient of software services offered by software enterprises. Many standardized web services are now available as commodity offerings from web service providers. An important problem for a web service requester is the web service composition problem which involves selecting the right mix of web service offerings to execute an end-to-end business process. Web service offerings are now available in bundled form as composite web services and more recently, volume discounts are also on offer, based on the number of executions of web services requested. In this paper, we develop efficient algorithms for the web service composition problem in the presence of composite web service offerings and volume discounts. We model this problem as a combinatorial auction with volume discounts. We first develop efficient polynomial time algorithms when the end-to-end service involves a linear workflow of web services. Next we develop efficient polynomial time algorithms when the end-to-end service involves a tree workflow of web services.

Resource usage monitoring for KVM based virtual machines

Realization of cloud computing has been possible due to availability of virtualization technologies on commodity platforms. Measuring resource usage on the virtualized servers is difficult because of the fact that the performance counters used for resource accounting are not virtualized. Hence, many of the prevalent virtualization technologies like Xen, VMware, KVM etc., use host specific CPU usage monitoring, which is coarse grained. In this paper, we present a performance monitoring tool for KVM based virtualized machines, which measures the CPU overhead incurred by the hypervisor on behalf of the virtual machine along-with the CPU usage of virtual machine itself. This fine-grained resource usage information, provided by the above tool, can be used for diverse situations like resource provisioning to support performance associated QoS requirements, identification of bottlenecks during VM placements, resource profiling of applications in cloud environments, etc. We demonstrate a use case of this tool by measuring the performance of web-servers hosted on a KVM based virtualized server.

Eco-friendly wood polymer composites for sustainable design applications

Environmental inputs can improve the level of innovation by interconnecting them with traditional inputs regarding the properties of materials and processes as a strategic eco-design procedure. Advanced engineered polymer composites are needed to meet the diverse needs of users for high-performance automotive, construction and commodity products that simultaneously maximize the sustainability of forest resources. In the current work, wood polymer composites (WPC) are studied to promote long-term resource sustainability and to decrease environmental impacts relative to those of existing products. A series of polypropylene wood–fiber composite materials having 20, 30, 40 and 50 wt. % of wood–fibers were prepared using twin-screw extruder and injection molding machine. Tensile and flexural properties of the composites were determined. Polypropylene (PP) as a matrix used in this study is a thermoplastic material, which is recyclable. Suitability of the prepared composites as a sustainable product is discussed.

La ciencia económica después de la crisis mundial

I am delighted to be here this evening. This is my first visit to Argentina and I am honored to be invited by the Catholic University of Argentina. I will talk about the world crisis from a Keynesian point of view, and my lecture will be divided into three parts: why did it start?; what should we be doing about it?; and what steps can we take to prevent something like this from happening again. So I will deal with “origin”, “recovery” and “reform”. Because of the speed of the recovery in this part of the world my diagnosis and prescriptions might at first glance seem less relevant to Argentina and Latin America than to Europe and the United States. But Latin America’s recovery is mainly based on rising commodity prices and commodity prices are, partly determined by what happens to the rest of the world. In a globalized world each country fate is bound up with the fate of its neighbors. Bringing about a global recovery, therefore, is in the interest of all, whether in South America or Southern Europe.

Efectos de la política monetaria en un modelo de precios rígidos en distintas monedas

Resumen: En un modelo dinámico, de dos países y con precios rígidos, este trabajo analiza la transmisión de la política monetaria cuando las empresas fijan sus precios en distintas monedas. Siguiendo el modelo de Betts y Devereux (2000) suponemos que las empresas pueden fijar un único precio para el mercado local y extranjero en moneda del país al cual exportan. Algunas empresas segmentan el mercado por país y otras fijan un único precio en su propia moneda o en la del país vecino. Los precios rígidos en moneda del país vecino aumentan la variabilidad del tipo de cambio y reducen los efectos positivos que la política monetaria tiene sobre el consumo y la tasa de interés real, respecto a una situación donde las empresas sólo segmentan el mercado o fijan un único precio en su propia moneda. En ausencia de segmentación de mercado, a mayor número de empresas que fijen su precio en moneda del país vecino, mayor es el efecto positivo que un shock monetario en el país extranjero tiene sobre su bienestar y el del otro, pero es menor en ambos cuando se produce en el país local.

Aquaculture Asia, Vol.14, No.1, pp.1-51, January-March 2009

Peter Edwards writes on rural aquaculture: Myanmar revisited. Harvesting, traditional preservation and marketing of fishes of Chalan Beel, Bangladesh, by Galib, S.M. and Samad, M.A. Role of community in production and supply of larger, quality fingerlings, by Radheyshyam, De, H.K. and Saha, G.S. Can rice-fish farming provide food security in Bangladesh? by Ahmed, N. and Luong-Van, J. Nutritional and food security for rural poor through multi-commodity production from a lake of eastern Uttar Pradesh, by Singh, S.K. Emerging boost in Sri Lankan reservoir fish production: a case of adoption of past research findings, by Amarasinghe, U.S., Weerakoon, D.E.M., Athukorala, D.A. Farming the freshwater prawn Macrobrachium malcolmsonii, by Radheyshyam Breeding and seed production of butter catfish, Ompok pabda (Siluridae) at Kalyani Centre of CIFA, India, by Chakrabarti, P.P., Chakrabarty, N.M. and Mondal, S.C. Asia-Pacific Marine Finfish Aquaculture Magazine Use of fish in animal feeds: a fresh perspective National strategies for aquatic animal health management, by Mohan, C.V. NACA Newsletter.

Seafood safety: economics of Hazard Analysis and Critical Control Point (HACCP) programmes

Seventy percent of the world's catch of fish and fishery products is consumed as food. Fish and shellfish products represent 15.6 percent of animal protein supply and 5.6 percent of total protein supply on a worldwide basis. Developing countries account for almost 50 percent of global fish exports. Seafood-borne disease or illness outbreaks affect consumers both physically and financially, and create regulatory problems for both importing and exporting countries. Seafood safety as a commodity cannot be purchased in the marketplace and government intervenes to regulate the safety and quality of seafood. Theoretical issues and data limitations create problems in estimating what consumers will pay for seafood safety and quality. The costs and benefits of seafood safety must be considered at all levels, including the fishers, fish farmers, input suppliers to fishing, processing and trade, seafood processors, seafood distributors, consumers and government. Hazard Analysis Critical Control Point (HACCP) programmes are being implemented on a worldwide basis for seafood. Studies have been completed to estimate the cost of HACCP in various shrimp, fish and shellfish plants in the United States, and are underway for some seafood plants in the United Kingdom, Canada and Africa. Major developments within the last two decades have created a set of complex trading situations for seafood. Current events indicate that seafood safety and quality can be used as non-tariff barriers to free trade. Research priorities necessary to estimate the economic value and impacts of achieving safer seafood are outlined at the consumer, seafood production and processing, trade and government levels. An extensive list of references on the economics of seafood safety and quality is presented. (PDF contains 56 pages; captured from html.)

A review of bonga fisheries of the Cross River State, Nigeria

The Nigerian pelagic fishery contributes about two-thirds of the total marine fishery resources of the country. The main components of this fishery are the clupeid (Ethmalosa, and Sardinella spp) and the scombroid (jacks, barracuda and tuna) fisheries. In 1979 to 1983, fish production from the national inshore and brackishwater zones was 1,702,685 tonnes. Bonga (Ethmalosa fimbriata) which dominates the pelagic fishery in the Cross River State of Nigeria, contributed about 158,612 tonnes (i.e. 9.3%) of this national marine fish catch. Although bonga is caught along the entire Nigerian coast, a significant fishery exists mostly in the wider estuary of the Cross River State, which borders on the Cameroon Republic. In the Cross River State, and within the period, bonga contributed 24% to the marine fish landings. Bonga is supported by a single species (E. fimbriata). The species forms an important fishery all the year-round in the open sea off these estuaries, whenever the canoes venture to sea, but these open sea fisheries are affected by whether conditions. The best, and most suitable gear for bonga are the gill nets, cast nets, boat seines, and shore seines. Dried and smoked bonga are a common market commodity in the southern parts of the country generally, but particularly in the Cross State where it is a readily available and acceptable food item