Assessment of the performance of steel fibre reinforced self-compacting concrete in elevated slabs

The reinforcement mechanisms at the cross section level assured by fibres bridging the cracks in steel fibre reinforced self-compacting concrete (SFRSCC) can be significantly amplified at structural level when the SFRSCC is applied in structures with high support redundancy, such is the case of elevated slab systems. To evaluate the potentialities of SFRSCC as the fundamental material of elevated slab systems, a ¼ scale SFRSCC prototype of a residential building was designed, built and tested. The extensive experimental program includes material tests for characterizing the relevant properties of SFRSCC, as well as structural tests for assessing the performance of the prototype at serviceability and ultimate limit conditions. Three distinct approaches where adopted to derive the constitutive laws of the SFRSCC in tension that were used in finite element material nonlinear analysis to evaluate the reliability of these approaches in the prediction of the load carrying capacity of the prototype.

Analytical approach for the flexural analysis of RC beams strengthened with prestressed CFRP

The objective of this paper is to propose a simplified analytical approach to predict the flexural behavior of simply supported reinforced-concrete (RC) beams flexurally strengthened with prestressed carbon fiber reinforced polymer (CFRP) reinforcements using either externally bonded reinforcing (EBR) or near surface mounted (NSM) techniques. This design methodology also considers the ultimate flexural capacity of NSM CFRP strengthened beams when concrete cover delamination is the governing failure mode. A moment–curvature (M–χ) relationship formed by three linear branches corresponding to the precracking, postcracking, and postyielding stages is established by considering the four critical M–χ points that characterize the flexural behavior of CFRP strengthened beams. Two additional M–χ points, namely, concrete decompression and steel decompression, are also defined to assess the initial effects of the prestress force applied by the FRP reinforcement. The mid-span deflection of the beams is predicted based on the curvature approach, assuming a linear curvature variation between the critical points along the beam length. The good predictive performance of the analytical model is appraised by simulating the force–deflection response registered in experimental programs composed of RC beams strengthened with prestressed NSM CFRP reinforcements.

Time-dependent flexural behaviour of cracked steel fibre reinforced self-compacting concrete panels

In the present work are described and discussed the results of an extensive experimental program that aims to study the long-term behaviour of cracked steel fibre reinforced self-compacting concrete, SFRSCC, applied in laminar structures. In a first stage, the influence of the initial crack opening level (wcr = 0.3 and 0.5 mm), applied stress level, fibre orientation/dispersion and distance from the casting point, on the flexural creep behaviour of SFRSCC was investigated. Moreover, in order to evaluate the effects of the creep phenomenon on the residual flexural strength, a series of monotonic tests were also executed. It was found that wcr = 0.5 mm series showed a higher creep coefficient comparing to the series with a lower initial crack opening. Furthermore, the creep performance of the SFRSCC was influenced by the orientation of the extracted prismatic specimens regarding the direction of the concrete flow within the cast panel.

Embedded Through-Section shear strengthening technique using steel and CFRP bars in RC beams of different percentage of existing stirrups

The Embedded Through-Section (ETS) technique is a promising technique for the shear strengthening of existing (RC) elements. According to this technique, holes are drilled through the beam section, and bars of steel or FRP material are introduced into these holes and bonded to the concrete with adhesive materials. An experimental program was carried out with RC T-cross section beams strengthened in shear using the ETS steel bars and ETS CFRP rods. The research is focused on the evaluation of the ETS efficiency on beams with different percentage of existing internal transverse reinforcement (ρsw=0.0%, ρsw=0.1% and ρsw=0.17%). The effectiveness of different ETS strengthening configurations was also investigated. The good bond between the strengthening ETS bars and the surrounding concrete allowed the yield initiation of the ETS steel bars and the attainment of high tensile strains in the ETS CFPR rods, leading to significant increase of shear capacity, whose level was strongly influenced by the inclination of the ETS bars and the percentage of internal transverse reinforcement.

Assessment of the effectiveness of steel fibre reinforcement for the punching resistance of flat slabs by experimental research and design approach

The present paper deals with the experimental assessment of the effectiveness of steel fibre reinforcement in terms of punching resistance of centrically loaded flat slabs, and to the development of an analytical model capable of predicting the punching behaviour of this type of structures. For this purpose, eight slabs of 2550 x 2550 x 150 mm3 dimensions were tested up to failure, by investigating the influence of the content of steel fibres (0, 60, 75 and 90 kg/m3) and concrete strength class (50 and 70 MPa). Two reference slabs without fibre reinforcement, one for each concrete strength class, and one slab for each fibre content and each strength class compose the experimental program. All slabs were flexurally reinforced with a grid of ribbed steel bars in a percentage to assure punching failure mode for the reference slabs. Hooked ends steel fibres provided the unique shear reinforcement. The results have revealed that steel fibres are very effective in converting brittle punching failure into ductile flexural failure, by increasing both the ultimate load and deflection, as long as adequate fibre reinforcement is assured. An analytical model was developed based on the most recent concepts proposed by the fib Mode Code 2010 for predicting the punching resistance of flat slabs and for the characterization of the behaviour of fibre reinforced concrete. The most refined version of this model was capable of predicting the punching resistance of the tested slabs with excellent accuracy and coefficient of variation of about 5%.

A FEM-based model to study the behaviour of corroded RC beams shear repaired by NSM CFRP rods technique

This paper presents the main features of finite element FE numerical model developed using the computer code FEMIX to predict the near-surface mounted NSM carbon-fiber-reinforced polymer CFRP rods shear repair contribution to corroded reinforced concrete RC beams. In the RC beams shear repaired with NSM technique, the Carbon Fibre Reinforced Polymer (CFRP) rods are placed inside pre-cut grooves onto the concrete cover of the RC beam’s lateral faces and are bonded to the concrete with high epoxy adhesive. Experimental and 3D numerical modelling results are presented in this paper in terms of load-deflection curves, failure modes and slip information of the tensile steel bars for 4 short corroded beams: two corroded beams (A1CL3-B and A1CL3-SB) and two control beams (A1T-B and A1T-SB), the beams noted with B were let repaired in bending only with NSM CFRP rods while the ones noted with SB were repaired in both bending and shear with NSM technique. The corrosion of the tensile steel bars and its effect on the shear capacity of the RC beams was discussed. Results showed that the FE model was able to capture the main aspects of the experimental load-deflection curves of the RC beams, moreover it has presented the experimental failure modes and FE numerical modelling crack patterns and both gave similar results for non-shear repaired beams which failed in diagonal tension mode of failure and for shear-repaired beams which failed due to large flexural crack at the middle of the beams along with the concrete crushing, three dimensional crack patterns were produced for shear-repaired beams in order to investigate the splitting cracks occurred at the middle of the beams and near the support.

Experimental analysis of the cyclic response of traditional timber joints and their influence on the seismic capacity of timber frame structures

Timber connections represent the crucial part of a timber structure and a great variability exists in terms of types of connections and mechanisms. Taking as case study the widespread traditional timber frame structures, in particular the Portuguese Pombalino buildings, one of the most common timber connection is the half-lap joint. Connections play a major role in the overall behaviour of a structure, particularly when assessing their seismic response, since damage is concentrated at the connections. For this reason, an experimental campaign was designed and distinct types of tests were carried out on traditional half-lap joints to assess their in-plane response. In particular, pull-out and in-plane cyclic tests were carried out on real scale unreinforced connections. Subsequently, the connections were retrofitted, using strengthening techniques such as self-tapping screws, steel plates and GFRP sheets. The tests chosen were meant to capture the hysteretic behaviour and dissipative capacity of the connections and characterise their response and, therefore, their influence on the seismic response of timber frame walls, particularly concerning their uplifting and rotation capacity, that could lead to rocking in the walls. In this paper, the results of the experimental campaign are presented in terms of hysteretic curves, dissipated energy and equivalent viscous damping ratio. Moreover, recommendations are provided on the most appropriate retrofitting solutions.

High strain rate constitutive modeling forhistorical structures subjected to blast loading

Doctoral Thesis Civil Engineering

Reforço de ligações tradicionais de madeira

Dissertação de mestrado integrado em Engenharia Civil

Population biology of Eudendrium caraiuru (Cnidaria, Anthoathecata, Eudendriidae) from São Sebastião Channel, Southeastern Brazil

The ecology of Eudendrium spp. from the Brazilian coast is poorly known, although it already proved to be useful and important as a tool to solve some taxonomical problems of the genus. The seasonality and reproduction patterns of a population of Eudendrium caraiuru Marques & Oliveira, 2003 were studied. Data were sampled from test panels immersed in the water off Cabelo Gordo de Dentro beach, in São Sebastião Channel, Southeastern Brazil, from July 1999 to July 2000, every three months. Eudendrium caraiuru was active throughout the study period. Reproductive peaks of the species were regulated by cold and low-salinity water, although part of the population always bore mature gonophores. In addition to morphological differences, ecological differences between E. caraiuru and its similar species, E. glomeratum Picard, 1951, especially from well known populations of the Mediterranean Sea, corroborated that these species are diverse lineages of a unique ancestor.

Behavior study of pipes after forming, coating and bending

A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.

Egg Structures of Anopheles fluminensis and Anopheles shannoni

Eggs of two species belonging to the Arribalzagia Series of the Laticorn Section of Anopheles (Anopheles) collected in Brazil are described from scanning electron micrographs. The An. fluminensis egg is long with shallow floats displaced far dorsally. The narrow deck region is overlain by a frill modified into prominent ridges that are nearly continuous to both ends of the egg. Slightly opened decks at both poles contain an average of four lobed tubercles. Polygonal, plastron-type chorionic cells cover the lateral and dorsal surfaces. The egg of An. shannoni is unique in possessing 22-27 fingerlike filaments that project with regular spacing from each of its massive floats. These filaments and their bases are highly perforated and are believed to trap air and support flotation of the egg with the dorsal surface up, contrary to the usual orientation for anophelines. The eggs are compared with those of related species bearing similar structures, notably An. fluminensis with An. mediopunctatus s.s and An. shannoni with An. peryassui

Giardia agilis: Ultrastructure of the Trophozoites in the Frog Intestine

Intestine samples of Bufo sp. tadpoles with parasitism confirmed for Giardia agilis were studied by transmission electron microscopy. The G. agilis trophozoites were long and thin. The plasma membrane was sometimes undulated and the cytoplasm, adjacent to the dorsal and ventral regions, showed numerous vacuoles. The two nuclei presented prominent nucleoli. The cytoplasm was electron-dense with free ribosomes, glycogen and rough endoplasmic reticulum-like structures. Polyhedral inclusions were observed in the cytoplasm and outside the protozoan; some of these inclusions exhibited membrane disruption. The flagella ultrastructure is typical, with the caudal pair accompanied by the funis. Next to the anterior pair, osmiophilic material was noticed. The ventro-lateral flange was short and thick, supported by the marginal plates that penetrated into its distal extremity; only its distal portion had adjacent osmiophilic filament. The G. agilis trophozoites showed the general subcellular feature of the genus. However, the ventro-lateral flange ultrastructure was an intermediate type between G. muris and G. duodenalis.

Role of the epithelial sodium channel (ENaC) and its positive regulator, the channel-activating protease 1 (CAP1) in skin

Summary: The mammalian epidermis is a pluristratified epithelium composed of 90% keratinocytes, and its main function is to serve as barrier for the body. The epithelial sodium channel (ENaC), formed by three homologous subunits α, β and γ is found in a variety of epithelia including epidermis. Previous studies showed that ENaC modulates different aspects of epidermal differentiation, such as synthesis of differentiation-specific proteins and lipid secretion. ENaC plays also a critical role in sodium homeostasis of renal and pulmonary epithelia, and its activity is thereby well controlled by hormones and non-hormonal factors, such as the serine protease CAP1 (channel-activating protease 1), also termed prostasin encoded by Prss8 gene. Serine proteases are proteolytic enzymes involved in numerous physiological and pathological processes in the epidermis. In order to evaluate the role of β and γENaC in epidermis, we analyzed the skin phenotype of β and γENaC null mutant (βENaC-/- and γENaC-/-) mice in comparison with the phenotype of αENaC-deficient mice. Furthermore, keratin14-specific CAP1-deficient mice (Prss8lox/Δ /K14-Cre) were generated in order to unveil the role of the serine protease CAP1 in epidermal development and function. This study reveals that the skin phenotype of βENaC and γENaC null mutant mice is less severe than the one of αENaC-deficient mice. However, all these mice present a common premature lipid secretion in the mid-granular layer of the epidermis. Further, the composition of the lipids of the stratum corneum in αENaC-deficient mice is strongly altered, suggesting that epidermal barrier function is compromised. K14-specific CAP1-deficient newborn mice are born at the expected Mendelian ratio, but die soon after birth, showing that CAP1 is required for postnatal survival. The epidermis of these mice exhibits striking malformations of the stratum corneum showing hyperkeratosis. These defects seriously affect both inward and outward epidermal barrier function, leading to rapid and fatal dehydration. As in αENaC-deficient mice, the lipid composition of the stratum corneum of K14-specific CAP1-deficient mice is disturbed. Furthermore, lack of CAP1 leads to the selective loss of filaggrin monomers, important for keratins aggregation and skin moisturization, and to an increased of aberrant profilaggrin precursors. In conclusion, both ENaC and CAP1 expression in the epidermis are crucial for keratinocyte differentiation processes and/or barrier function. Since the abnormalities in K14-specific CAP1-deficient mice resemble key features of human skin ichthyosis, in particular Harlequin ichthyosis, the study of ENaC and CAP1 mutant mice might allow new insights into mechanisms underlying skin diseases. Résumé: L'épiderme des mammifères est un épithélium pluristratifié, protégeant le corps contre les perturbations extérieures et la déshydratation. Le canal épithélial à sodium (ENaC), formé de trois sous-unités α, β et γ, est exprimé dans de nombreux épithélia, comme l'épiderme. Des études ont montré que l'absence de la sous-unité αENaC modulait différents aspects de la différenciation des kératinocytes de l'épiderme, comme la synthèse de protéines spécifiques ou la sécrétion de lipides dans la couche granulaire de l'épiderme. ENaC joue également un rôle crucial dans l'homéostasie du sodium dans les épithélia électriquement étanches, comme l'épithélium rénal ou pulmonaire. L'activité de ENaC est par conséquent finement régulée, en partie par des hormones, mais aussi par des facteurs non-hormonaux, telle que la sérine protéase CAP1 (« channel-activating protease 1 >>) (nommée également prostasine et codée par le gène Prss8). Le but de ce travail a donc été d'étudier le rôle des sous-unités β et γENaC dans l'épiderme en comparaison avec celui de la sous-unité α en utilisant des souris mutantes βENaC-/- et γENaC-/-. Dans un deuxième temps, le phénotype d'une souris chez qui CAP1 a été spécifiquement invalidé dans l'épiderme (Prsslox/Δ/K14-Cre) a été analysé, dans le but de mettre en évidence le rôle de cette protéase dans l'épiderme. Comme déjà montré pour les souris αENaC-/-, la sécrétion des lipides dans la couche granulaire de l'épiderme des souris βENaC-/- et γENaC-/- est prématurée. Cependant, l'hyperplasie et l'expression anormale des protéines marqueurs de la différenciation présents chez les souris αENaC-/- n'ont pas été observés dans l'épiderme des souris βENaC-/- et γENaC-/-. La composition lipidique de la couche cornée des souris αENaC-/- est fortement altérée suggérant que la fonction de barrière de l'épiderme de ces souris est compromise. Les souris mutantes CAP1 ont quant à elles révélé des malformations sévères de leur couche cornée, affectant la fonction de barrière de leur épiderme et conduisant à la mort de ces souris par déshydratation quelques jours après leur naissance. De plus, la composition en lipides de la couche cornée ainsi que la taille des cellules cornées, les cornéocytes, de ces souris sont modifiées par rapport aux souris contrôles. L'invalidation de la protéine CAP1 dans l'épiderme conduit aussi à la perte de la filaggrine, une protéine cruciale pour l'agrégation des kératines dans la couche cornée et le maintien du niveau d'hydratation de la peau, et à l'accumulation de ses précurseurs. En conclusion, l'expression de ENaC et de CAP1 est cruciale pour la différenciation de l'épiderme et/ou sa fonction de barrière. De plus, le phénotype des souris mutantes CAP1 présente des caractéristiques qui ressemblent à celles observées dans certaines pathologies humaines cutanées, comme l'ichthyose d'Harlequin. L'étude des souris mutantes ENaC et CAP1 pourrait donc apporter de nouvelles connaissances dans les mécanismes impliqués dans l'ichthyose d'Harlequin ou d'autres maladies de la peau chez l'homme. Résumé tout public: La peau est le plus grand organe vital du corps humain. Sa fonction principale est de protéger le corps comme une barrière, contre les agressions extérieures et la déshydratation. De nombreuses maladies de la peau résultent d'une perte de fonction de cette barrière. Bien que les pathologies cutanées soient très bien décrites, leur cause génétique n'est en général pas encore connue. La souris est alors un modèle de choix pour la recherche fondamentale. En effet, grâce aux progrès récents de la science, le génome de la souris peut aujourd'hui être modifié dans le but d'étudier le rôle de nombreuses protéines. Dans différents organes, comme le rein et le poumon, le canal épithélial à sodium (ENaC), composé de trois sous-unités protéiques homologues (α, β, et γ), joue un rôle essentiel dans la réabsorption du sodium. L'activité de ENaC est régulée par de nombreux facteurs hormonaux et non-hormonaux, telle que la protéase CAP1 (« channel-activating protease 1 »). L'invalidation de la sous-unité αENaC chez la souris a permis de montrer que dans la peau, le canal ENaC est impliqué dans la différenciation des cellules de l'épiderme et la croissance des poils. Durant ce travail, le phénotype des souris chez qui la protéine βENaC, γENaC ou CAP1 a été invalidée (souris mutantes), a été étudié dans le but de mieux comprendre le rôle des sous-unités du canal ENaC et de son régulateur CAP1 dans la peau. Les résultats de ce projet ont montré que les souris mutantes βENaC et γENaC présentent un épiderme anormal avec une synthèse prématurée de lipides dans la couche granulaire, suggérant l'implication de ENaC dans la fonction de barrière de la peau. De plus, quand CAP1 est invalidé de manière totale chez les souris, le développement embryonnaire est perturbé et ces souris meurent avant la naissance. CAP1 a donc été invalidé spécifiquement dans l'épiderme des souris. Ces souris mutantes « épiderme-spécifique » naissent normalement, mais meurent peu après la naissance de déshydratation. La couche superficielle de l'épiderme, appelée couche cornée, de ces souris est malformée et ne confère plus à la peau sa fonction de barrière. De plus, les composants de la couche cornée, les cellules cornées entourées de lipides, sont sévèrement altérés. Le phénotype de ces souris ressemble aux caractéristiques présentes chez les patients atteints d'ichthyoses, en particulier l'ichthyose d'Harlequin. En conclusion, le canal ENaC ainsi que son régulateur CAP1 jouent un rôle clé dans les processus de différenciation de l'épiderme et/ou de sa fonction de barrière. De plus, les souris mutantes pour CAP1 et ENaC se révéleront peut-être comme des modèles appropriés dans l'étude de l'ichthyose d'Harlequin ou d'autres maladies cutanées.

Noninvasive functional and structural exploration of human subcortical structures with high resolution

Projecte de recerca elaborat a partir d’una estada al Max Planck Institute for Human Cognitive and Brain Sciences, Alemanya, entre 2010 i 2012. El principal objectiu d’aquest projecte era estudiar en detall les estructures subcorticals, en concret, el rol dels ganglis basals en control cognitiu durant processament lingüístic i no-lingüístic. Per tal d’assolir una diferenciació minuciosa en els diferents nuclis dels ganglis basals s’utilitzà ressonància magnètica d’ultra-alt camp i alta resolució (7T-MRI). El còrtex prefrontal lateral i els ganglis basals treballant conjuntament per a mitjançar memòria de treball i la regulació “top-down” de la cognició. Aquest circuit regula l’equilibri entre respostes automàtiques i d’alt-ordre cognitiu. Es crearen tres condicions experimentals principals: frases/seqüències noambigües, no-gramatical i ambigües. Les frases/seqüències no-ambigües haurien de provocar una resposta automàtica, mentre les frases/seqüències ambigües i no-gramaticals produïren un conflicte amb la resposta automàtica, i per tant, requeririen una resposta de d’alt-ordre cognitiu. Dins del domini de la resposta de control, la ambigüitat i no-gramaticalitat representen dues dimensions diferents de la resolució de conflicte, mentre per una frase/seqüència temporalment ambigua existeix una interpretació correcte, aquest no és el cas per a les frases/seqüències no-gramaticals. A més, el disseny experimental incloïa una manipulació lingüística i nolingüística, la qual posà a prova la hipòtesi que els efectes són de domini-general; així com una manipulació semàntica i sintàctica que avaluà les diferències entre el processament d’ambigüitat/error “intrínseca” vs. “estructural”. Els resultats del primer experiment (sintax-lingüístic) mostraren un gradient rostroventralcaudodorsal de control cognitiu dins del nucli caudat, això és, les regions més rostrals sostenint els nivells més alts de processament cognitiu