Seawater carbonate chemistry and hatching rate, malformation rate, metamorphosis rate and shell growth of the Pacific abalone in a laboratory experiment

The hatching process of the Pacific abalone Haliotis discus hannai was prolonged at a pH of 7.6 and pH 7.3, and the embryonic developmental success was reduced. The hatching rate at pH 7.3 was significantly (10.8%) lower than that of the control (pH 8.2). The malformation rates at pH 7.9 and pH 8.2 were less than 20% but were 53.8% and 77.3% at pH 7.6 and pH 7.3, respectively. When newly hatched larvae were incubated for 48 h at pH 7.3, only 2.7% of the larvae settled, while more than 70% of the larvae completed settlement in the other three pH treatments. However, most 24 h old larvae could complete metamorphosis in all four pH treatments. Overall, a 0.3-unit reduction in water pH will produce no negative effect on the early development of the Pacific abalone, but further reduction in pH to the values predicted for seawater by the end of this century will have strong detrimental effects.

Biomass of mesozooplankton in the western part of the Black Sea in 1992 during the Cooperative Marine Science Program for the Black Sea (CoMSBlack)

The "CoMSBlack92" dataset is based on samples collected in the summer of 1992 along the Bulgarian coast including coastal and open sea areas. The whole dataset is composed of 79 samples (28 stations) with data of zooplankton species composition, abundance and biomass. Sampling for zooplankton was performed from bottom up to the surface at standard depths depending on water column stratification and the thermocline depth. Zooplankton samples were collected with vertical closing Juday net,diameter - 36cm, mesh size 150 ?m. Tows were performed from surface down to bottom meters depths in discrete layers. Samples were preserved by a 4% formaldehyde sea water buffered solution. Sampling volume was estimated by multiplying the mouth area with the wire length. Sampling volume was estimated by multiplying the mouth area with the wire length. The collected material was analysed using the method of Domov (1959). Samples were brought to volume of 25-30 ml depending upon zooplankton density and mixed intensively until all organisms were distributed randomly in the sample volume. After that 5 ml of sample was taken and poured in the counting chamber which is a rectangle form for taxomomic identification and count. Large (> 1 mm body length) and not abundant species were calculated in whole sample. Counting and measuring of organisms were made in the Dimov chamber under the stereomicroscope to the lowest taxon possible. Taxonomic identification was done at the Institute of Oceanology by Asen Konsulov using the relevant taxonomic literature (Mordukhay-Boltovskoy, F.D. (Ed.). 1968, 1969,1972 ). The biomass was estimated as wet weight by Petipa, 1959 (based on species specific wet weight). Wet weight values were transformed to dry weight using the equation DW=0.16*WW as suggested by Vinogradov & Shushkina, 1987. Copepods and Cladoceras were identified and enumerated; the other mesozooplankters were identified and enumerated at higher taxonomic level (commonly named as mesozooplankton groups). Large (> 1 mm body length) and not abundant species were calculated in whole sample. The biomass was estimated as wet weight by Petipa, 1959 ussing standard average weight of each species in mg/m**3.

Phytoplankton abundance measured on water samples from rivers of the Lena Delta in 2009

During the 2009 cruise in the Lena delta a first comprehensive set of phytoplankton samples was collected from several areas of the Lena Delta. The aim was to establish a first checklist of phytoplankton and microzooplankton species in the Delta for form the basis for future assessments and to aid in the selection of sites to be used as fixed annual monitoring sites in future.

Prospects for Development of the Garment Industry in Developing Countries: What Has Happened Since the MFA Phase-Out?

On January 1, 2005, the controlled trade regime on textiles and clothing which was based on the Multi-Fiber Arrangement (MFA) made in 1974 was abolished. This institutional change wrought great impacts on the world market for textiles and clothing.This paper reviews the impacts of the changes on the main markets and examines the prospects for the markets and the source countries. The main conclusions are as follows: (1) after the renewal of quantitative restrictions on Chinese garment exports were agreed with the US and the EU, the post-MFA surge in Chinese garment exports was significantly attenuated; (2) instead, the growth in garment exports from other Asian low-income countries to the two markets was revived in 2006; (3) the Japanese market has been kept almost intact from the impact of the regime shift; (4) some developing countries, such as Bangladesh and Cambodia, not only survived the liberalization but also have steadily expanded their garment exports throughout the transition; and (5) an indicative fact is that the profitability of the garment industry in Bangladesh and Cambodia was high on average according to surveys conducted in 2003, which might have bolstered the steady growth of garment exports in the past, and possibly future growth, too.

Do PGI integrated farms perform better? The case of the beef farms in Spain

European rural development policy is gaining in importance through one of its key instruments, the Protected Geographical Indications (PGI) system, which is designed to improve quality standards. Previous research has shown that PGI-certified beef farms tend to be more extensively managed operations that are better adapted to mountainous areas. This paper describes a comparative study of two production systems, one with PGI certification and one without, focusing on a number of economic variables. The results show a positive association between PGI production and profitability. In efficiency terms, non-certified farms show better pure technical efficiency scores, while PGI-certified holdings score higher on scale efficiency.

On the structure of the floating zone in melting

Floating zone melting is used in crystal growth and purification of high melting materials. The use of a reduced gravity environment will remove the constraint imposed on the length of the zone by the hydrostatic pressure. The equilibrium of the fioatmg zone may involve, (1)Hydrostatic forces, when the zone rotates as a whole. (2)Convective driving forces, when the zone is stationary but fluid property gradients appear.(3) Hydrodynamic forces, when some parts of the zone are set into motion with respect to others. The last effects are considered in this paper. The flow pattern of a floating zone held between two discs in relative motion is complicated, and thence the solution of the problem is difficult even assuming a constant property-newtonian liquid Nevertheless, when a small parameter appears m the problem, the complete flow field can be split into zones where simple solutions are found. To illustrate this approach, the spin up from rest of an initially cylindrical floating zone is considered with detail. Here the small parameter is the time elapsed from the impulsive starting of motion. Since the problem which has been considered, as well as some others which can be tackled by use of similar methods, concern the viscous layer close to either plate, they can be simulated experimentally in the ground laboratory with short floating zones. Procedures to produce these zones are indicated.

Reuse of vacant agro-industrial buildings. The case of the public slaughterhouses in Spain

Nearly 3000 slaughterhouses (74% of them public facilities) were built in Spain during the last decades of the nineteenth century and the first half of the twentieth century. The need to comply with new technical requirements and regulations on the hygiene of the meat passed in the 70s and the gradual replacement of public facilities by larger and more modern private slaughterhouses have subsequently led to the closure and abandonment of many of these buildings. Public slaughterhouses generally consisted of several single-storey and open-plan buildings located around a courtyard. Although originally they were preferably located on the outskirts of the towns, many slaughterhouses are now placed inside the built up areas, due to the urban development. The present work aims to contribute to a better understanding of these agro-industrial buildings and to provide ideas for their conservation and reuse. A review on the historical evolution and the architectural features of the public slaughterhouses in Spain is presented and different examples of old vacant slaughterhouses reused to accommodate libraries, offices, community centres, exhibition halls or sports centres, among others, are shown in the paper.

Development of a method of assessment of the problem-solving competence at the technical University of Madrid.

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem-solving competence. The first step has been to elaborate a guide for teachers to provide a homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provides the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem-solving competence.

The role of the urban support in the regeneration of vulnerable neighbourhoods

The processes of social and urban segregation have got worse during the last decades. Several studies have deepened into the analysis of the causes and consequences of these processes and have tried to define solutions that beyond eradicating some specific problems, were aimed at the consolidation of sustainable urban environments. This paper presents an approach to the problem of urban inequality based on the concept of urban vulnerability as something that goes beyond the social and economic problems. In exclusion processes it is very important to consider the urban context and the physical and structural conditions not only in each neighborhood but also in the city as a whole. The paper seeks to pose a reflection on the urban support, which is understood in all its complexity and thought to be a key to ensure access and the right to the city of the citizens most in need.

Development of a method of assessment of the problem-solving competency at the Technical University of Madrid

The competence evaluation promoted by the European High Education Area entails a very important methodological change that requires guiding support to help lecturers carry out this new and complex task. In this regard, the Technical University of Madrid (UPM, by its Spanish acronym) has financed a series of coordinated projects with the objective of developing a model for teaching and evaluating core competences and providing support to lecturers. This paper deals with the problem solving competence. The first step has been to elaborate a guide for teachers to provide an homogeneous way to asses this competence. This guide considers several levels of acquisition of the competence and provided the rubrics to be applied for each one. The guide has been subsequently validated with several pilot experiences. In this paper we will explain the problem-solving assessment guide for teachers and will show the pilot experiences that has been carried out. We will finally justify the validity of the method to assess the problem solving competence.

Structural efficiency variation with the problem size in some bending problems = Variación del rendimiento estructural con el tamaño del problema en algunos casos de flexión simple

Existe normalmente el propósito de obtener la mejor solución posible cuando se plantea un problema estructural, entendiendo como mejor la solución que cumpliendo los requisitos estructurales, de uso, etc., tiene un coste físico menor. En una primera aproximación se puede representar el coste físico por medio del peso propio de la estructura, lo que permite plantear la búsqueda de la mejor solución como la de menor peso. Desde un punto de vista práctico, la obtención de buenas soluciones—es decir, soluciones cuyo coste sea solo ligeramente mayor que el de la mejor solución— es una tarea tan importante como la obtención de óptimos absolutos, algo en general difícilmente abordable. Para disponer de una medida de la eficiencia que haga posible la comparación entre soluciones se propone la siguiente definición de rendimiento estructural: la razón entre la carga útil que hay que soportar y la carga total que hay que contabilizar (la suma de la carga útil y el peso propio). La forma estructural puede considerarse compuesta por cuatro conceptos, que junto con el material, definen una estructura: tamaño, esquema, proporción, y grueso.Galileo (1638) propuso la existencia de un tamaño insuperable para cada problema estructural— el tamaño para el que el peso propio agota una estructura para un esquema y proporción dados—. Dicho tamaño, o alcance estructural, será distinto para cada material utilizado; la única información necesaria del material para su determinación es la razón entre su resistencia y su peso especifico, una magnitud a la que denominamos alcance del material. En estructuras de tamaño muy pequeño en relación con su alcance estructural la anterior definición de rendimiento es inútil. En este caso —estructuras de “talla nula” en las que el peso propio es despreciable frente a la carga útil— se propone como medida del coste la magnitud adimensional que denominamos número de Michell, que se deriva de la “cantidad” introducida por A. G. M. Michell en su artículo seminal de 1904, desarrollado a partir de un lema de J. C. Maxwell de 1870. A finales del siglo pasado, R. Aroca combino las teorías de Galileo y de Maxwell y Michell, proponiendo una regla de diseño de fácil aplicación (regla GA), que permite la estimación del alcance y del rendimiento de una forma estructural. En el presente trabajo se estudia la eficiencia de estructuras trianguladas en problemas estructurales de flexión, teniendo en cuenta la influencia del tamaño. Por un lado, en el caso de estructuras de tamaño nulo se exploran esquemas cercanos al optimo mediante diversos métodos de minoración, con el objetivo de obtener formas cuyo coste (medido con su numero deMichell) sea muy próximo al del optimo absoluto pero obteniendo una reducción importante de su complejidad. Por otro lado, se presenta un método para determinar el alcance estructural de estructuras trianguladas (teniendo en cuenta el efecto local de las flexiones en los elementos de dichas estructuras), comparando su resultado con el obtenido al aplicar la regla GA, mostrando las condiciones en las que es de aplicación. Por último se identifican las líneas de investigación futura: la medida de la complejidad; la contabilidad del coste de las cimentaciones y la extensión de los métodos de minoración cuando se tiene en cuenta el peso propio. ABSTRACT When a structural problem is posed, the intention is usually to obtain the best solution, understanding this as the solution that fulfilling the different requirements: structural, use, etc., has the lowest physical cost. In a first approximation, the physical cost can be represented by the self-weight of the structure; this allows to consider the search of the best solution as the one with the lowest self-weight. But, from a practical point of view, obtaining good solutions—i.e. solutions with higher although comparable physical cost than the optimum— can be as important as finding the optimal ones, because this is, generally, a not affordable task. In order to have a measure of the efficiency that allows the comparison between different solutions, a definition of structural efficiency is proposed: the ratio between the useful load and the total load —i.e. the useful load plus the self-weight resulting of the structural sizing—. The structural form can be considered to be formed by four concepts, which together with its material, completely define a particular structure. These are: Size, Schema, Slenderness or Proportion, and Thickness. Galileo (1638) postulated the existence of an insurmountable size for structural problems—the size for which a structure with a given schema and a given slenderness, is only able to resist its self-weight—. Such size, or structural scope will be different for every different used material; the only needed information about the material to determine such size is the ratio between its allowable stress and its specific weight: a characteristic length that we name material structural scope. The definition of efficiency given above is not useful for structures that have a small size in comparison with the insurmountable size. In this case—structures with null size, inwhich the self-weight is negligible in comparisonwith the useful load—we use as measure of the cost the dimensionless magnitude that we call Michell’s number, an amount derived from the “quantity” introduced by A. G. M. Michell in his seminal article published in 1904, developed out of a result from J. C.Maxwell of 1870. R. Aroca joined the theories of Galileo and the theories of Maxwell and Michell, obtaining some design rules of direct application (that we denominate “GA rule”), that allow the estimation of the structural scope and the efficiency of a structural schema. In this work the efficiency of truss-like structures resolving bending problems is studied, taking into consideration the influence of the size. On the one hand, in the case of structures with null size, near-optimal layouts are explored using several minimization methods, in order to obtain forms with cost near to the absolute optimum but with a significant reduction of the complexity. On the other hand, a method for the determination of the insurmountable size for truss-like structures is shown, having into account local bending effects. The results are checked with the GA rule, showing the conditions in which it is applicable. Finally, some directions for future research are proposed: the measure of the complexity, the cost of foundations and the extension of optimization methods having into account the self-weight.

A real case of a cognitive multiplayer game: design and development of the iOS client in Swift and its cloud architecture

as tecnologías emergentes como el cloud computing y los dispositivos móviles están creando una oportunidad sin precedentes para mejorar el sistema educativo, permitiendo tanto a los educadores personalizar y mejorar la experiencia de aprendizaje, como facilitar a los estudiantes que adquieran conocimientos sin importar dónde estén. Por otra parte, a través de técnicas de gamificacion será posible promover y motivar a los estudiantes a que aprendan materias arduas haciendo que la experiencia sea más motivadora. Los juegos móviles pueden ser el camino correcto para dar soporte a esta experiencia de aprendizaje mejorada. Este proyecto integra el diseño y desarrollo de una arquitectura en la nube altamente escalable y con alto rendimiento, así como el propio cliente de iOS, para dar soporte a una nueva version de Temporis, un juego móvil multijugador orientado a reordenar eventos históricos en una línea temporal (e.j. historia, arte, deportes, entretenimiento y literatura). Temporis actualmente está disponible en Google Play. Esta memoria describe el desarrollo de la nueva versión de Temporis (Temporis v.2.0) proporcionando detalles acerca de la mejora y adaptación basados en el Temporis original. En particular se describe el nuevo backend hecho en Go sobre Google App Engine creado para soportar miles de usuarios, asó como otras características por ejemplo como conseguir enviar noticaciones push desde la propia plataforma. Por último, el cliente de iOS en Temporis v.2.0 se ha desarrollado utilizando las últimas y más relevantes tecnologías, prestando especial atención a Swift (el lenguaje de programación nuevo de Apple, que es seguro y rápido), el Paradigma Funcional Reactivo (que ayuda a construir aplicaciones altamente interactivas además de a minimizar errores) y la arquitectura VIPER (una arquitectura que sigue los principios SOLID, se centra en la separación de asuntos y favorece la reutilización de código en otras plataformas). ABSTRACT Emerging technologies such as cloud computing and mobile devices are creating an unprecedented opportunity for enhancing the educational system, letting both educators customize and improve the learning experience, and students acquire knowledge regardless of where they are. Moreover, through gamification techniques it would be possible to encourage and motivate students to learn arduous subjects by making the experience more motivating. Mobile games can be a perfect vehicle to support this enhanced learning experience. This project integrates the design and development of a highly scalable and performant cloud architecture, as well as the iOS client that uses it, in order to provide support to a new version of Temporis, a mobile multiplayer game focused on ordering time-based (e.g. history, art, sports, entertainment and literature) in a timeline that currently is available on Google Play. This work describes the development of the new Temporis version (Temporis v.2.0), providing details about improvements and details on the adaptation of the original Temporis. In particular, the new Google App Engine backend is described, which was created to support thousand of users developed in Go language are provided, in addition to other features like how to achieve push notications in this platform. Finally, the mobile iOS client developed using the latest and more relevant technologies is explained paying special attention to Swift (Apple's new programming language, that is safe and fast), the Functional Reactive Paradigm (that helps building highly interactive apps while minimizing bugs) and the VIPER architecture (a SOLID architecture that enforces separation of concerns and makes it easy to reuse code for other platforms).

Rational design of a global inhibitor of the virulence response in Staphylococcus aureus, based in part on localization of the site of inhibition to the receptor-histidine kinase, AgrC

Two-component signaling systems involving receptor-histidine kinases are ubiquitous in bacteria and have been found in yeast and plants. These systems provide the major means by which bacteria communicate with each other and the outside world. Remarkably, very little is known concerning the extracellular ligands that presumably bind to receptor-histidine kinases to initiate signaling. The two-component agr signaling circuit in Staphylococcus aureus is one system where the ligands are known in chemical detail, thus opening the door for detailed structure–activity relationship studies. These ligands are short (8- to 9-aa) peptides containing a thiolactone structure, in which the α-carboxyl group of the C-terminal amino acid is linked to the sulfhydryl group of a cysteine, which is always the fifth amino acid from the C terminus of the peptide. One unique aspect of the agr system is that peptides that activate virulence expression in one group of S. aureus strains also inhibit virulence expression in other groups of S. aureus strains. Herein, it is demonstrated by switching the receptor-histidine kinase, AgrC, between strains of different agr specificity types, that intragroup activation and intergroup inhibition are both mediated by the same group-specific receptors. These results have facilitated the development of a global inhibitor of virulence in S. aureus, which consists of a truncated version of one of the naturally occurring thiolactone peptides.

Production of infectious human respiratory syncytial virus from cloned cDNA confirms an essential role for the transcription elongation factor from the 5' proximal open reading frame of the M2 mRNA in gene expression and provides a capability for vaccine development.

Infectious human respiratory syncytial virus (RSV) was produced by the intracellular coexpression of five plasmid-borne cDNAs. One cDNA encoded a complete positive-sense version of the RSV genome (corresponding to the replicative intermediate RNA or antigenome), and each of the other four encoded a separate RSV protein, namely, the major nucleocapsid N protein, the nucleocapsid P phosphoprotein, the major polymerase L protein, or the protein from the 5' proximal open reading frame of the M2 mRNA [M2(ORF1)]. RSV was not produced if any of the five plasmids was omitted. The requirement for the M2(ORF1) protein is consistent with its recent identification as a transcription elongation factor and confirms its importance for RSV gene expression. It should thus be possible to introduce defined changes into infectious RSV. This should be useful for basic studies of RSV molecular biology and pathogenesis; in addition, there are immediate applications to the development of live attenuated vaccine strains bearing predetermined defined attenuating mutations.

Kinetic study of the decompositions involved in the thermal degradation of commercial azodicarbonamide

The transitions and reactions involved in the thermal treatment of several commercial azodicarbonamides (ADC) in an inert atmosphere have been studied by dynamic thermogravimetry analysis (TGA), mass spectrometry and Fourier transform infrared (FTIR) spectroscopy. A pseudo-mechanistic model, involving several competitive and non-competitive reactions, has been suggested and applied to the correlation of the weight loss data. The model applied is capable of accurately representing the different processes involved, and can be of great interest in the understanding and quantification of such phenomena, including the simulation of the instantaneous amount of gases evolved in a foaming process. In addition, a brief discussion on the methodology related to the mathematical modeling of TGA data is presented, taking into account the complex thermal behaviour of the ADC.